I Need help im a noob - Touch Pro2, Tilt 2 Windows Mobile ROM Development

hi guys i got a mda vario v t-mobile (htc tp2) dutch version i think because im from the dutch ehhehe. anyways im gettin trouble with install a other rom or updating this version...i know t-mobile rom sucks so i really wanna get this one off because the new roms rule the whole manila thingy clock thingy and stuff.. can anyone help me?
ye i forgot 2 tell that when i try 2 install the flash it gives me a error (260) its saying that i got connection problems but i think that might be wrong because i already tryed it out on a different pc... and i know i have 2 shut down my anti-virus programme
on my htc i get a warning(this package is not intended for your device type!! high chance of bricking!!! exiting now

I'm not sure what you're trying to flash, but check out the sticky threads. If you want a ROM other than that specifically designed for your device, your first step is HardSPL. Check out the sticky HardSPL thread, and if you have problems with it, then post in that thread.

well im trying 2 flash(hard-spl) my device HTC TOUCH PRO2(T-MOBILE VERSION VARIO V) i already downloaded the right rom for my device its the ENERGYROM FOR HTC PRO2. but when im trying 2 flash it with the hard-spl it says a error (260)(this package is not intended for your device type!! high chance of bricking!!! exiting now. and when im trying 2 install the ENERGY ROM for my device it stays on 0% of installing:S
tnx anyways

The fact that the ROM flash is staying at 0% is because you haven't got HardSPL. You need to get HardSPL on first.
I wonder if HardSPL can't handle the MDA Vario V ? What model number does it say it is, if you take out the battery, something like "RHODxxx" where the "xxx" is three digits, near where the serial number is ?
You really should post this in the HardSPL thread though.

ye thats why came with the hard-spl later on and even than it wont install the hard-spl. it says RHOD100
thank you for your support

1. Turn off your phone.
2. Connect USB with the PC (on the back on PC if not laptop)
3. Press Volume down + power button together on your phone (4 colored screen, red, blue, green and white should came up)
4. Connect usb to your phone. (should say usb in the middle of white part of the screen)
5. Start hard-spl.
6. When finished. remove the battery.
7. Put the battery back on
8. repeat 3 and 4
9. Start flashing "task 29".
10. repeat 6 and 7
11. repeat 3 and 4
12 start fleshing energy rom.
When you finish all adjusments turmno ff the phone, remove the battery for 5 minutes then start using your phone.
good luck

forster said:
1. Turn off your phone.
2. Connect USB with the PC (on the back on PC if not laptop)
3. Press Volume down + power button together on your phone (4 colored screen, red, blue, green and white should came up)
4. Connect usb to your phone. (should say usb in the middle of white part of the screen)
5. Start hard-spl.
6. When finished. remove the battery.
7. Put the battery back on
8. repeat 3 and 4
9. Start flashing "task 29".
10. repeat 6 and 7
11. repeat 3 and 4
12 start fleshing energy rom.
When you finish all adjusments turmno ff the phone, remove the battery for 5 minutes then start using your phone.
good luck
Click to expand...
Click to collapse
Erm, that's not going to work if HardSPL is bombing out with a "wrong device" error. But this discussion is going on in the HardSPL thread too.

May be you are not using the correct version of HardSPL? There are the CDMA and GSM versions. You should check which one your phone needs. Hope that helps

ye im using the correct hard-spl from the gsm thread.

ow ye
btw when i bootloader under the RHOD100 is writtin SPL-087.0000 that means theres already hard spl installed?

Please stop posting your questions in two places at once ? The HardSPL thread is the right place for your questions on HardSPL

please post your questions about hardspl in the appropriate thread, thread closed.

Related

orange tytn II unlockable?

Well I would like to get another software because the orange software is pretty much the worst one you can get.
I’ve been trying to update from wm6 to wm 6.1 but I had to hard reset my phone many times cause whenever I try to flash the rom, I get that white screen that stay at 0% during the whole process to finally see an error not on the devise but well from the software (running on vista).
Please help!!!!!!
few things to remember befoe u do anything to ur phone:
1) read kaiser wiki
2) from wiki follow links on how to flash hardspl on to ur device.
3) go to kaiser rom development forum and read the first sticky containing info about flashing.
flashing hardspl will cid and sim unlock ur device.
Plz do read and search or u will mess up ur toy.
isn't there an issue with flashing orange ones something to do wit the radio and not to change it? I want to flash mine but the wiki isn't too clear on orange versions
doesn't matter what stock rom u have, once hardspl'ed u can flash any rom/radio u want to ur device.
just make sure radio works w/rom u flash. alot of chefs include radios w/their roms and ones that don'zt will tell u which radio works with rom
technocat said:
isn't there an issue with flashing orange ones something to do wit the radio and not to change it? I want to flash mine but the wiki isn't too clear on orange versions
Click to expand...
Click to collapse
I've flashed my Orange TyTN II with no problems. So long as it is unlocked to all networks it should be OK. However if you do it then your warranty goes out the window.
Run HardSPL first
Once it is installed, double-check that it is installed by doing the folowing:
Power off and then press power on while keeping camera pressed, this will enter the so called bootloader mode and you see a tri-color screen (Red, Green, Blue). You should see "SPL-1.0 OliPof" on the second line in the top left corner. You can exit this mode by means of a "soft reset": press the reset button with the stylus.
If it does not say "SPL-1.0 OliPof" then HardSPL is NOT installed.
Once HardSPL is installed you can then run jockyw2001's unlocker to unlock the phone to all networks.
Then you can flash ROMS like there's no tomorrow!
nice walkthrough mate what's the differences between the roms just peoples personal customisations? is there a huge difference from the orange version?
the chefs cook whatever they want into the different roms..basically just personal stuff or needs...so read what posts and see which one fits u most...if not...try some out and see which one u like...
Narfy, go over to read this thread ... it is one man's story of getting his Orange unlocked and 'sorted'
http://forum.xda-developers.com/showthread.php?t=386089
With an happy ending
Ok having problems trying to unlock my orange tytn2. Hard SPL is installed, Step 1 of the kaiser simunlocker has been done and verified. Following the instructions, I have reset the phone to boot screen and went to step 2, step 2 of course is a command and in xp this closes as soon as you open it. Have went to command prompt to run step 2 and it gives an error about unable to connect to usb: cannot connect to \\.WCEUSBSH001
Anyone any ideas am now stuck lol.
please ignore sorted now helps when you actually read forums lol

T-MOBILE MDA III - Qtek 9090 please help (I from CZECH REPUBLIC)

Hi I from CZ and I have problem with my MDA III
what can I do ? please
"bootloader doesn't work and master reset too doesn't work" please help i dont know how to flash i was read much tutorials there but I not found a right tutorial please help me I dont know what i can do I form CZ and my mail is [email protected] ( kdyby nekdo z CR na to narazil tak mi prosim napiste a domluvime se na icq treba klidne kdybych to rozjel tak poslu i nejake penize nebo tak akorat mi prosim napiste co nejdriv ve stredu jdu jinak do servisu ale tam to bude stat hodne ) (this is PH20B
actually, depending on your screenshot, your device is exactly ready to flash, you just gotta put it in the cradle ad start flashing it with whatever rom you want. because what you see there is the bootloader:
How to enter into the so-called Bootlader mode on the HTC Blue Angel devices
Note: entering Bootloader mode will result a Hard Reset if you have WM2003SE on your device!
1. Press Power + record (above the volume slider) + softreset at the same time.
2. You should see a white screen with "Serial" text on it and the Bootloader version.
3. Put your device into the cradle
4. Make sure that the charger of your PDA is connected to the cradle.
5. The text should change to "USB" now.
what i want to say is, start flashing following the WIKI Wizard or several step by step guides to be found in the wiki and the forum
Chef_Tony said:
actually, depending on your screenshot, your device is exactly ready to flash, you just gotta put it in the cradle ad start flashing it with whatever rom you want. because what you see there is the bootloader:
How to enter into the so-called Bootlader mode on the HTC Blue Angel devices
Note: entering Bootloader mode will result a Hard Reset if you have WM2003SE on your device!
1. Press Power + record (above the volume slider) + softreset at the same time.
2. You should see a white screen with "Serial" text on it and the Bootloader version.
3. Put your device into the cradle
4. Make sure that the charger of your PDA is connected to the cradle.
5. The text should change to "USB" now.
what i want to say is, start flashing following the WIKI Wizard or several step by step guides to be found in the wiki and the forum
Click to expand...
Click to collapse
I want go to bootloader menu but is dont work I press Power +record+softt reset with stylus but it doesnot work and when I conect MDA with cabel to COM this cable in not USB and active sync not found MDA and when I start update with exe it write me not found (sorry for my english) help me please ? can you write me more detailed tutorial what can I do for flash please what I must download and what I must do anywhere dont work download and i dont know where I can download any files
EDIT : Flashing is not compatible with serial cable ? I have this cable
Code:
http://www.i-obchod.cz/product.asp?productid=6663
this is to serial port (COM) when i buy this
Code:
http://www.easydevices.co.uk/pp/PDA_Accessories/Cradles/QTEK_9090_USB_SYNC_CRADLE.html
work it with this ? or it better when I go to service and pay 800kč this is about 25 Euro or 40 dollars and when I place an order this cradle i pay for this 18£ this is about 600kč and about 7days when it send me to home and I go to service tomorow but if I Flash it I not having to go to service
hi guys!
my ba also displays this strange message after an unsuccessed update (disconnected before finished). i have tried to install the update once more but it says: error 101: connection error. because i own my ba just since 20 hours, i don't know what to do now. so maybe someone could translate it into newbie-language. one more thing: unfortunately i use vista.
thanks for your help!
tried it once more with the new windows mobile device manager but my pc does not find my ba. vista just plays a sound when i put it on the cradle. i think you are the only ones in the hole www who can help me. need your help!
use maupgradeut_noid for upgrade
both of you read wiki there are solutions to your problems
maupgradeut_noid tells me this:
don't think that it is right.
hi folks!
i have tried it a hundred times with my vista mashine and a couple of times with xp on virtualbox but nothing. 15 minutes ago i have turned on my old xp mashine, downloaded the ROM from tmobile germany and started the application. it worked for me without maupgradeut_noid. only the original rom and nothing else. so my tip: don't waste your time with vista! xp is much better for solving this problem. thanks xp!
ok, but as i see it you didn't solve a problem but avoided it, and not even in the best way. i use vista too and i am unable to re-flash my device. the general problem is that the identifier of the device change over the flashing process, so vista downloads new drivers and cuts the connection. as i understand it, there is hardly any way to avoid that.
of course you do't need to use maupgrade_noid for an original rom, the _noid file is, as implied by the name, to avoide the device from identifying, so you could flash a WWE Rom to a rather locked german device.
as you might have realised, the picture you posted shows the magician and not the blueangel, hence the name Maupgrade instead of Baupgrade, which again is solved by the _noid version of the file and putting the device to bootloader first.
that the window does not show the versions from what version you flash to what version exactlyu doesn't matter at all. but as mentioned before, you should use an xp machine which will work like a charm!
am i to understand, that you have the latest official t-mobile rom on? the wm2003se?
as fast and battery friendly that might be, it is so out-dated and practically no newer third party software will be supported, like the fantastic application SPB Online, and the interface is incredibly ugly. if you ever want to try and flash your device again, try my tips above and it will work out just fine, as you seem to have mixed up a few things, but never mind.
i wish you best luck for trying again and will stand by for support, whether something might still not work out as planned.
good luck
Chef_Tony
well if you upgrade under vista take a look here
also look here for MAUpgradeUT_NOID and proper files - it is on the bottom of the page, so you only need the nbf files

Tilt Bootloader

ok im going to start off by saying...im young at this thing...anyway the other day i wantd 6.5 on my htc8900...i got the rom onthe sdcard but im stuck at the screen?!?!?! n i really really just want to figure this out...some1 please!!!
ok so what all did you do, we need more info then you provided.
basically i was searching how to get this beta on my tilt...so i came across this 1 guy from here and he gave me a list of links to follow..."FIRST READ THE
WIKI
HARD SPL
SUPER CID
THEN FLASH via sd card or usb"
exact words....then i did all those things...n everytime i do that bootloader reset it states "KAIS1*0
SPL-3.56.0000
CPLD-8"<---red bar
nothing in green...and nothing in blue, and @ the bottom it say serial.
AND it stays there forever...i can softreset and go back to my normal state but i want beta please help me seniors
just need step-by-step for 6.5 email->[email protected]
6.5 is no different then 6.0 or 6.1, it's what you use that matters.
Which 6.5 ROM are you using, there are several out there already?
Is this not setp by step enough for you?
http://forum.xda-developers.com/showthread.php?t=433835
ok i did read that... and did it but im tryin to put this on my htc http://anryl.freeforums.org/21232-public-releases-links-requests-t29.html#p261
but what?
Follow the instructions and it will be done.
From Mskips post
Flashing Via MicroSD Card
1. Make sure your microSD is Formatted to fat32 (you dont have to delete all files but it is safer if you do)
2. Download your prefered Rom from the Kaiser Rom Develpoment Page and unzip/unrar it to your computer
3. Goto the Roms Folder and rename the .nbh file to KAISIMG.nbh
4. Copy the KAISIMG.nbh file to the root of your MicroSD Card
5. Plug the MicroSD Card into the phone
6. Hold in the Power and Camera buttons, then press the reset button with the stylus for about 3 seconds until the BootLoader screen appears
7. You will first see a tri-color screen with the phone and SPL Information at the top
8. A message will then pop up asking you to press the Power button to start the update
9. Press power button to start flashing
10. Once phone finishes flashing and says Update Complete, reset with the stylus
11. When it gets to the screen where it configures the stylus, HARD RESET
(press left and right softkey buttons on the front and hold in reset with stylus until message appears)
12. When prompted, Press "Send Button" (Green Call Button on Front) to Clear Data
13. When prompted, Press "Send Button" (Green Call Button on Front) to Restart Phone
14. Follow onscreen instructions to set up your New Rom
Click to expand...
Click to collapse
IBTiltin325 said:
basically i was searching how to get this beta on my tilt...so i came across this 1 guy from here and he gave me a list of links to follow..."FIRST READ THE
WIKI
HARD SPL
SUPER CID
THEN FLASH via sd card or usb"
exact words....then i did all those things...n everytime i do that bootloader reset it states "KAIS1*0
SPL-3.56.0000
CPLD-8"<---red bar
nothing in green...and nothing in blue, and @ the bottom it say serial.
AND it stays there forever...i can softreset and go back to my normal state but i want beta please help me seniors
Click to expand...
Click to collapse
You still have the stock AT$T spl on your phone. So obviously you did not follow the steps in the guide. If you followed all of mskips steps, you would have Hardspl on your phone.
Re-read and follow all the steps carefully in mskips guide. Do not mess around with things that you do not understand or you will have a very expensive door stop on your hands.
@Chumley, is that a custom rom I see on your phone ? I thought you were the last bastion of the stock rom. What happened ? And 6.5 no less.
Oh no, I flashed this baby the first week I had it. I ran duttys last rom for about a year though.
haha look everyone...after i opened my eyes n started to read then i got it....THANKS TO ALL SENIORS...4real what ya do is something sick...and ya good at it...ohhh last question though...is there any other 65 roms like recent?
thanxs again...
IBTiltin325 said:
haha look everyone...after i opened my eyes n started to read then i got it....THANKS TO ALL SENIORS...4real what ya do is something sick...and ya good at it...ohhh last question though...is there any other 65 roms like recent?
thanxs again...
Click to expand...
Click to collapse
Go in to rom development and look around, even though I don't care for 6.5 , I have flashed 6.5 roms by Josh , anyrl, abusalza, and support. Chumley is currently using one by chinhe. They are all great, try each one and keep the one you like best.
im guessing....7 is out of the question...or im too early for class?
IBTiltin325 said:
im guessing....7 is out of the question...or im too early for class?
Click to expand...
Click to collapse
LOL ....too early for class, come back @ spring 2010

Cant flash rom any more

Hey
My first post - weee
I been reading and learning from this forum for quite some time now. And I have flash my rom a few times succesfully.
But I upgrade recently to wm 6.5 with the original rom for HTC.
Its not as good as my 6.1 rom, so i have tried to install a different ROM with wm 6.5.
My problem is that it starts ok - the tricolor screen comes and it says USB in the bottom of the screen. The screen then turns white and a status bar is shown (and on the screen of my pc as well). It says 0 % and stays there for 5 minuts or so. Then it says Error 262 and the I have take out the battery and start med phone again.
When i remove the battery and starts the phone im back to my old wm 6.5 original rom - so no harm done.
Why cant i flash my phone ?
I have tried (after reading a lot) to
- unlock the CID ?
- Hard reset
- Soft reset
- using a different rom
Am I missing something or ?
Try flashing from the card rather than PC. or from PC but take out the sdcard. Also make sure you have Hard-SPL still.
Pezzie said:
Hey
My first post - weee
I been reading and learning from this forum for quite some time now. And I have flash my rom a few times succesfully.
But I upgrade recently to wm 6.5 with the original rom for HTC.
Its not as good as my 6.1 rom, so i have tried to install a different ROM with wm 6.5.
My problem is that it starts ok - the tricolor screen comes and it says USB in the bottom of the screen. The screen then turns white and a status bar is shown (and on the screen of my pc as well). It says 0 % and stays there for 5 minuts or so. Then it says Error 262 and the I have take out the battery and start med phone again.
When i remove the battery and starts the phone im back to my old wm 6.5 original rom - so no harm done.
Why cant i flash my phone ?
I have tried (after reading a lot) to
- unlock the CID ?
- Hard reset
- Soft reset
- using a different rom
Am I missing something or ?
Click to expand...
Click to collapse
take out sd card
do hard reset
do wipe data
go to step 0 and begin with unlocker
flash stock rom
now flash rom you would like.
worst case, if you have trouble flashing it - key--combo to bootloader and flash/hardspl from there
Thx
I unlocked the phone using HARD SPL after removing the SD card and flashed it.
It works
Thx for the help.
Do you have a HardSPL? If not, then you won't be able to flash. You need to do some more reading.
shannonknable said:
Do you have a HardSPL? If not, then you won't be able to flash. You need to do some more reading.
Click to expand...
Click to collapse
YOU need to do some more reading. Specifically one post above... the OP had fixed his issue with HardSPL...
I had that problem a couple of times actually. For me, it was that my port isn't quite as tight as it used to be. (That's what she said) So I just have to make double sure that my phone doesn't move during the flashing sequence AT ALL. Otherwise the same problem will occur.
Hope this helps!
whoops same problem to me. I don't read so good when it's friday night. I stand by my advice though for future problems

New Tilt 2 ST-7377 Won't Flash.

I have tried flashing this new Tilt 2 several times. It, the PC software and the progress graph on the Tilt 2, always stay stuck at 0% progress, the PC app times out after about 5 min's. Then I reboot the Tilt2 and it comes back to its usual annoying self (with AT&Ts irritating splash screen) and works fine.
I have tried:
Rhodium-HardSPL_V2_00R3_185HSPL
Energy.RHODIUM.23569.Sense2.5.MaxSense.Jul.10.7z
and others with the same result.
I have even tried a hardware reboot (Power + Vol-) with a ROM image on the Micro SD card and all I get is the tri-colour screen with the word SERIAL near the bottom.
I have owned and flashed HTC Hermes, Ty-TNII and an I-Mate Ultimate 8205 with out any problems.
There must be a reason for this odd behavior and hopefully a solution.
Sparticus Palace said:
I have tried flashing this new Tilt 2 several times. It, the PC software and the progress graph on the Tilt 2, always stay stuck at 0% progress, the PC app times out after about 5 min's. Then I reboot the Tilt2 and it comes back to its usual annoying self (with AT&Ts irritating splash screen) and works fine.
I have tried:
Rhodium-HardSPL_V2_00R3_185HSPL
Energy.RHODIUM.23569.Sense2.5.MaxSense.Jul.10.7z
and others with the same result.
I have even tried a hardware reboot (Power + Vol-) with a ROM image on the Micro SD card and all I get is the tri-colour screen with the word SERIAL near the bottom.
I have owned and flashed HTC Hermes, Ty-TNII and an I-Mate Ultimate 8205 with out any problems.
There must be a reason for this odd behavior and hopefully a solution.
Click to expand...
Click to collapse
First off have you installed hardspl ? If not then you will not be able to install any custom ROM till you do. I suggest that you go to the hardspl thread and read on how to flash it, once you do then you can flash any GSM ROM you like..
You may need to install the enablerapinew.cab before the Hardspl will run. Just do a search on site and you'll find it.
read first ask questions later!!
yeah read, read, then read some more and then if you have question ask lol. it is very easy and i came on and asked a lot of questions that i ended up answering for myself when i read through the posts. [email protected] i can be reached any time and answer any question
Sparticus Palace said:
I have tried flashing this new Tilt 2 several times. It, the PC software and the progress graph on the Tilt 2, always stay stuck at 0% progress, the PC app times out after about 5 min's.
Click to expand...
Click to collapse
Did you ead the stickie?
try this. install it first and then try to hardspl.
I have this same phone, and everytime I try to flas it, it says the servers are down? Hmmmm.
Have you tried turning it off & on again?
Joshwah said:
I have this same phone, and everytime I try to flas it, it says the servers are down? Hmmmm.
Click to expand...
Click to collapse
same here servers down. the internet check is annoying.

Categories

Resources