Well I would like to get another software because the orange software is pretty much the worst one you can get.
I’ve been trying to update from wm6 to wm 6.1 but I had to hard reset my phone many times cause whenever I try to flash the rom, I get that white screen that stay at 0% during the whole process to finally see an error not on the devise but well from the software (running on vista).
Please help!!!!!!
few things to remember befoe u do anything to ur phone:
1) read kaiser wiki
2) from wiki follow links on how to flash hardspl on to ur device.
3) go to kaiser rom development forum and read the first sticky containing info about flashing.
flashing hardspl will cid and sim unlock ur device.
Plz do read and search or u will mess up ur toy.
isn't there an issue with flashing orange ones something to do wit the radio and not to change it? I want to flash mine but the wiki isn't too clear on orange versions
doesn't matter what stock rom u have, once hardspl'ed u can flash any rom/radio u want to ur device.
just make sure radio works w/rom u flash. alot of chefs include radios w/their roms and ones that don'zt will tell u which radio works with rom
technocat said:
isn't there an issue with flashing orange ones something to do wit the radio and not to change it? I want to flash mine but the wiki isn't too clear on orange versions
Click to expand...
Click to collapse
I've flashed my Orange TyTN II with no problems. So long as it is unlocked to all networks it should be OK. However if you do it then your warranty goes out the window.
Run HardSPL first
Once it is installed, double-check that it is installed by doing the folowing:
Power off and then press power on while keeping camera pressed, this will enter the so called bootloader mode and you see a tri-color screen (Red, Green, Blue). You should see "SPL-1.0 OliPof" on the second line in the top left corner. You can exit this mode by means of a "soft reset": press the reset button with the stylus.
If it does not say "SPL-1.0 OliPof" then HardSPL is NOT installed.
Once HardSPL is installed you can then run jockyw2001's unlocker to unlock the phone to all networks.
Then you can flash ROMS like there's no tomorrow!
nice walkthrough mate what's the differences between the roms just peoples personal customisations? is there a huge difference from the orange version?
the chefs cook whatever they want into the different roms..basically just personal stuff or needs...so read what posts and see which one fits u most...if not...try some out and see which one u like...
Narfy, go over to read this thread ... it is one man's story of getting his Orange unlocked and 'sorted'
http://forum.xda-developers.com/showthread.php?t=386089
With an happy ending
Ok having problems trying to unlock my orange tytn2. Hard SPL is installed, Step 1 of the kaiser simunlocker has been done and verified. Following the instructions, I have reset the phone to boot screen and went to step 2, step 2 of course is a command and in xp this closes as soon as you open it. Have went to command prompt to run step 2 and it gives an error about unable to connect to usb: cannot connect to \\.WCEUSBSH001
Anyone any ideas am now stuck lol.
please ignore sorted now helps when you actually read forums lol
Related
Hello, i bought a ATT kaiser last week on ebay. The phone is unlocked and comes with HTC WM6 rom. Now i was thinking on upgrading it when it gets here to WM6.1 Duttys. Just wondering if this sounds right. When i get it do i have to run HardSPL then the rom , and lastly the radio...Do i have to install a new radio or can i leave it out. and Since it has been hacked to HTC rom's do i need to run HardSPL first. Thanks and feel free to fill me in on anything i am missing. i really do not want to brick my new phone eheh. Oh one more thing is it really even worth upgrading the rom to 6.1 will i see a big differance with all the effort.
Thanx a ton Grand Pooba
Oh also i heard i might have to install the org. rom first. is this true ?
What you want to do is check out the following thread:
http://forum.xda-developers.com/showthread.php?t=369282
Read all you can regarding flashing to understand the process better.
To answer your questions:
1) If the device is not HardSPL, then you need to do that first. To check this, hold down the Camera+Power Buttons, and press the Reset button using the stylus. If it's HardSPL you should see a tri-color screen (Red, Green, Blue) with "KAIS1*0 MFG and some additional info, including "SPL-1.0.OliPof. If you see this then it's HardSPL.
2) For the radio it depends on what's currently on your device and what's required by the ROM you want to use. Normally each ROM will have details as to which radio you need. It's recommended to flash Radio first and then ROM.
ok, im inbetween a newb and a full out destructive force to any type of moddable device and im having a little bit of trouble with my cingular 8125. ive had this phone for a few months and i am having the hardest time dealing with the rom on the phone now. ill give a quick breifing on it:
got it with original cingular rom, not sure what spl or ipl on it but the first thing i did was unlock it by myself, cid and sim unlocked, and then updated to a jaguar wm 6.1 rom which worked fine. decided i was going to unfortunately sell this phone so i decided to upgrade it one more time to see if i really wanted to sell it, i then bought the upgrade to go past my 2.21 ipl and spl. i got my unlocker and followed my instructions and got a brick. but not a full brick. its stuck in the bootloader screen. after reading countless threads, i learned that i should be able to just still update a rom to the phone with no problems which actually works, but as soon as a rom completes it goes right back to my bootloader screen so help me! please cuz now thats its a challenge again, i want the phone! plus all my info is on the phone still back up
Flash the official stock ROM first, then use Button's ROM to downgrade your IPL and SPL before unlocking CID.
post the present IPL/SPL it displays now.Which rom you are trying to flash now ?
ok when i try to put the most current 8125 rom on my phone (2.25.blah) it tells me that its not the same phone which is weird but thats preventing me from putting the original rom on the phone. however if i try and put the buton rom on the phone now, it will go through completely and say it put it on the phone, but when it restart, its right back to the bootload screen...
and im running IPL 2.21.0001 and SPL 2.21 with a previous installation of a jaguar rom, dont know exactly which one, but i know it was a jaguar rom. but right before i tried to upgrade the updater, i went back to my default WM5 rom so i guess it was te basic 2.21 rom on the phone with WM5
dimedash12 said:
ok when i try to put the most current 8125 rom on my phone (2.25.blah) it tells me that its not the same phone which is weird but thats preventing me from putting the original rom on the phone. however if i try and put the buton rom on the phone now, it will go through completely and say it put it on the phone, but when it restart, its right back to the bootload screen...
and im running IPL 2.21.0001 and SPL 2.21 with a previous installation of a jaguar rom, dont know exactly which one, but i know it was a jaguar rom. but right before i tried to upgrade the updater, i went back to my default WM5 rom so i guess it was te basic 2.21 rom on the phone with WM5
Click to expand...
Click to collapse
WEIRD !
You got mixed Bootloaders of G3 And G4,IPL 2.21.0001 is G4 and SPL 2.21 is G3,as you posted,well,can't say which was original,only you can tell,but some how its mixed Bootloaders,in this situation no Rom will flash,its a 'Brick'.
If as Zabardast says its bricked then you have three options:
1. Get a new Wizard
2. Get a new Wizard Motherboard
3. Get a Wizard with broken LCD from eBay and replace its LCD with your current one and Enjoy!!! (Cheapest)
lol this is tough! but no worries, ill be back with some other pda at some point and time and then ill try and take this phone apart! but the weird thing about my wizard is that this only happened when i tried to update the phone with the CID unlock program that you have to pay for!
lol it was perfectly fine until i tried to do it! oh well, back to my crappy p168!
May be that CID Unlock program was not meant to be for a G3 and you were updating a G3 so it mixed you IPL/SPL and caused a kinda BRICK. So please be careful before doing flashing things because if you dont be carefull then your PPC may become a heavy paper weight, and a costy one too. LOL. TC
kitty4uhig said:
Farming for eq2 plat isn't easy, but you can buy eq2 plat, guides, accounts & items on sale. We have revolutionized the exchange of money to eq2 plat. Purchase eq2 plat& power up your character ot the next level. Our world class customer service will make sure you are more than satisfied with every purchase. Feel free to contact our 24 hour live support with any questions you may have. Shop now and play as a VIP!
Click to expand...
Click to collapse
Stop this nonsense immediately,otherwise it'll be reported and you'll be banned.Its spam !!!
try this: http://forum.xda-developers.com/showthread.php?t=276963
Cingular 8125 problems
Ok guys i am really pissed i have been looking for three days and cant find it, first off my IPL is at 1.01 and the SPL is at 2.25 and i cant fix it i wanted to install the original 2.25 again and start from scratch but can not find the damn thing so if anyone has it can u just upload it fo me and give me a link that i can get it at please i am sick and tired of waitnin i really like this phone and i dont want to risk bricking it thanks.
Ok, grimgod, aggression is reaaaallly ugly and no freakin one will help with that sh!t attitude (pardon the language, mods). The senior members do everything they can to help the noobs. Have you tried reading the flashing guide, wiki, or tutorial? I'd bet even money you haven't. Have you CID unlocked? Did you flash the button rom twice ( as the guide suggested to get ipl/spl both 2.xx)? Did you flash the official tmo rom (found im the flashing guide)? Have you done anything other than sit on your hands and wait for it to be handed to you? READ AND SEARCH!!!!!!!!!!!!!!!!
http://forum.xda-developers.com/showthread.php?t=310831 <HERE!!!!!!!!!! Should I flash your device, too?
Similar issue... need some Wizard Expertise
I picked up a coworkers old Cingular 8125 that he'd had in a drawer for about a year. Battery was right dead so the phone wouldn't boot. I charged the battery on an external charger for a few minutes, put it back into the phone, and plugged it in to the charger until the LED went green indicating a full charge.
When I power up I see the T-Mobile splash screen (light gray background, some square dots, and the "T-Mobile" logo). And there it stays indefinitely.
Tried a hard reset (Comm Mgr + Voice Cmd + Soft Reset), and it said "Press Send to restore factory default". Pressed the green dialer key (I assume that's send), and it says Format FAT partition, FAT partition complete, and then returns to the same T-Mobile splash screen and hangs there.
So then I tried putting it into Boot Loader manually (Power On + Camera). No problem, shows IPL 2.26 and SPL 2.26. Plug it into the computer USB port (running XP Pro), and then the USB connection shows on the phone. Attempted to flash the Wizard Love ROM to get this thing back to square-one. Error 260. Attempted to flash the T-Mobile stock ROM. Error 260.
Between each flash attempt, I'm pulling the battery out and starting fresh. I think I've followed all the steps I'm finding in multiple threads. But for some reason I'm not able to get this thing to communicate via USB. All RUU's give an Error 260. Am I missing something?
Forgot to mention I'm following the steps outlined in this thread from Dr P. To the letter!
Also did a little reading up on using the MTTY method in this thread by Drug_Store. Thought maybe the existing ROM might be intact, and I might be able get it to a 256MB MiniSD, then write the backup ROM from SD in boot loader. Well, for some reason I don't even see the USB connection option when I use the MTTY - can't ever get to a point where I can issue commands. Again, I think I'm following the instruction. But still no juice.
Nudge, nudge. I'd donate for a solution that works... otherwise I have to keep letting my 10 year old play The Quest on my phone.
HI , friends i been trying to sim unlock my new tytn2 which is in uk orange network now.
I tried to install hard spl, i m new to this technical worlds like cooked rom, new hard spl etc ,.any one please tell me how to do this step by step,
When i tried to install hard spl, there comes a tricolor screen first white screen with progress bar 0% , and after some time it stucks and in pc shows error message. tried with jump spl method described by some one, in the kaiser section, what is the meaning of wm6 and wm6.1
Following are the details of my phone
R 1.27.12.29
G 22.45.88.07H
D 1.81.00.00
KAIS130
SPL-1.81.0000
CPLD-8
What should i do to get my phone unlocked, plz help i assure 5 pounds to the one who has time to help me in this. cheers friends.
WM6 and WM6.1 are Versions of Windows Mobile, see Settings, About on your phone.
Looking at the Radio version, you are a WM6.0 user still.
To install Hard SPL read here: http://forum.xda-developers.com/showthread.php?t=334679
If you get a white screen, read here: http://forum.xda-developers.com/showthread.php?t=354061
Once you have Hard SPL complete, you can SIM Unlock, read here: http://forum.xda-developers.com/newreply.php?do=newreply&noquote=1&p=2572785
I suggest you read here Getting Started and on the XDA Wiki, there is lots of information on the HTC Kaiser page that covers the basics.
It is appreciated to search and read before posting new threads when the information is already available. If you get stuck with one part, re-read the thread, search for your problem, and then (and only then) post in the thread you are trying to follow.
Thanks
Dave
thanks dave.but i tried it, i couldnt even install hard spl, i dont know what happens when i run jumpspl also it shows white screen no further actions takes place. i dont know what to do now.
pappoos4u said:
thanks dave.but i tried it, i couldnt even install hard spl, i dont know what happens when i run jumpspl also it shows white screen no further actions takes place. i dont know what to do now.
Click to expand...
Click to collapse
Try SSPL First, then JumpSPL 1.56, then JumpSPL 1.93. one should work.
Ta
Dave
pappoos4u said:
...i dont know what happens when i run jumpspl also it shows white screen no further actions takes place...
Click to expand...
Click to collapse
Dave's second link above says "If you get a white screen..."
Uhh......yea......I was trying to upgrade my Rom to Dutty's Diamond V1 Build 19588. I was using the instructions from Flash-Your-Tilt . I got to Step 4 CID-Unlock it installed 100% rebooted and then nothing. Now the phone will only play the intro with no sound, then go black. It shows in the lower right hand R 1.70.02iNex, G25.65.30, D1.62.00.00. The phone will allow me to do a hard reset but after it it goes through the intro with screen alignment and installs the extra apps, it reboots and then goes black. I did a ton of reading through the wiki's if someone could point me in the right direction or tell me if its toast, it would be much appreciated.
Thanks
Be strong. I think it's only bricked when you can't power it on.
I have a poor net connection and not time atm. So a suggestion if you haven't already, search the forum for the word bricked. I'm sure this has happened before..
There are several tricks that people know so you might be ok. good luck.
Calihoe said:
Uhh......yea......I was trying to upgrade my Rom to Dutty's Diamond V1 Build 19588. I was using the instructions from Flash-Your-Tilt . I got to Step 4 CID-Unlock it installed 100% rebooted and then nothing. Now the phone will only play the intro with no sound, then go black. It shows in the lower right hand R 1.70.02iNex, G25.65.30, D1.62.00.00. The phone will allow me to do a hard reset but after it it goes through the intro with screen alignment and installs the extra apps, it reboots and then goes black. I did a ton of reading through the wiki's if someone could point me in the right direction or tell me if its toast, it would be much appreciated.
Thanks
Click to expand...
Click to collapse
Flash an OEM Rom/Radio Combo. Also it wont hurt if you already CID unlocked to to go ahead and flash a new SPL to it. Should fix any and all issues as your phone is still actually booting and Not bricked
Installing windows the 6.1 ROM from HTC's site worked. Thank you very much for the great advice. If I wanted to now put Dutty's ROM on my phone can I go straight to that, or do I need to restart the whole ROM flashing process(installing Jump SPL, Hard SPL and CID) ?
If you have unlocked it, just put duttys onto the SD card and rename the .nbh to KAISIMG.nbh
Put the phone into bootloader and install Its the fastest most successful method. No worry about a data cable coming out mid flash ( happened once to me....not fun )
Shouldnt have to install hardspl again ( or use JumpSPL )
Just make sure that if you are installing a WM6.0 rom that you have a WM6.0 radio. If not, the flashing process for the radio is the same ( rename to KAISIMG.nbh )
Is there a way to see if I the hard SPL install and CID unlock worked ? Can I just restart the whole process regardless. Sorry for the noob questions.
Calihoe said:
Is there a way to see if I the hard SPL install and CID unlock worked ? Can I just restart the whole process regardless. Sorry for the noob questions.
Click to expand...
Click to collapse
Go into bootloader. If your screen says hardspl somewhere near the top then you're good to go. Check which version because you can have radio problems if you use a WM6.0 spl with a WM6.1 rom. Most recent roms are WM6.1 so try HardSPL 3.29 or higher.
If you don't have hardspl, get it here for wm6.0 roms or here for wm6.1 roms.
many thanks, your advice with the links were invaluable. I read and read and read, but i guess i did not read enough. This site rocks.
Hello,
Iam daniel. My english is not zo good but i will try.
I have flashed my phone with hardspl 3.56.
After that i installed wm6.5 from josh Build 21198
Then i start up my phone and every think look richt.
Then my phone ask for a restart, zo i start up and there was my problem, he doesn't start up.
I see thee first screen with red letters at the bottom and he does nothing.
Can you help me???
Have you tried a hard reset?
Also, did you CID unlock your phone as well? I believe you have to be CID unlocked to flash a 6.5 ROM on your phone.
Had a same matter last day ago, after re-flash, all working fine
I didn't unlock my phone whit cid...
for a hard reset is it the two buttuns (with the lines on it) near the phone buttom?
And a reflash how does that work?
I have no communication with my pc know because he crased in the screen when you starting up. It is the first screen you see when you restart your phone.
Ok, a couple of things... this is the wrong forum to be asking in, and I bet a mod is going to shut this down at some point. You should try posting in the forum for the ROM you flashed.
What you need to do is grab a stock WinMo 6.1 ROM and flash via the SD card method, that should get you up and running again.
Then, you will want to run Olipro's SIM/CID unlocker. What this will do is fully unlock your phone so you can flash any ROM, radio, SPL, any! Be careful, though, since not all ROMs are meant for Kaiser... so make sure you are flashing stuff meant for Kaiser.
Once you run Olipro's unlocker, you will want to re-flash the 3.56HardSPL, then a new radio, then go ahead and start flashing any ROM from the Kaiser section.
WinMo 6.5 ROMs reqiure you to be CID unlocked, and that is why you are stuck where you are.
And yes, you are right with how to do a hard rest.
Thanks! I try this tommorow if it works, if it doesn't work i will post my problem in the forum for rom. But hopfully it works because if cot know a nokia 6500 and i can't without my qwerty