Database Develop

orange tytn II unlockable?

Well I would like to get another software because the orange software is pretty much the worst one you can get.
I’ve been trying to update from wm6 to wm 6.1 but I had to hard reset my phone many times cause whenever I try to flash the rom, I get that white screen that stay at 0% during the whole process to finally see an error not on the devise but well from the software (running on vista).
Please help!!!!!!

few things to remember befoe u do anything to ur phone:
1) read kaiser wiki
2) from wiki follow links on how to flash hardspl on to ur device.
3) go to kaiser rom development forum and read the first sticky containing info about flashing.
flashing hardspl will cid and sim unlock ur device.
Plz do read and search or u will mess up ur toy.

isn't there an issue with flashing orange ones something to do wit the radio and not to change it? I want to flash mine but the wiki isn't too clear on orange versions

doesn't matter what stock rom u have, once hardspl'ed u can flash any rom/radio u want to ur device.
just make sure radio works w/rom u flash. alot of chefs include radios w/their roms and ones that don'zt will tell u which radio works with rom

technocat said:
isn't there an issue with flashing orange ones something to do wit the radio and not to change it? I want to flash mine but the wiki isn't too clear on orange versions
Click to expand...
Click to collapse
I've flashed my Orange TyTN II with no problems. So long as it is unlocked to all networks it should be OK. However if you do it then your warranty goes out the window.
Run HardSPL first
Once it is installed, double-check that it is installed by doing the folowing:
Power off and then press power on while keeping camera pressed, this will enter the so called bootloader mode and you see a tri-color screen (Red, Green, Blue). You should see "SPL-1.0 OliPof" on the second line in the top left corner. You can exit this mode by means of a "soft reset": press the reset button with the stylus.
If it does not say "SPL-1.0 OliPof" then HardSPL is NOT installed.
Once HardSPL is installed you can then run jockyw2001's unlocker to unlock the phone to all networks.
Then you can flash ROMS like there's no tomorrow!

nice walkthrough mate what's the differences between the roms just peoples personal customisations? is there a huge difference from the orange version?

the chefs cook whatever they want into the different roms..basically just personal stuff or needs...so read what posts and see which one fits u most...if not...try some out and see which one u like...

Narfy, go over to read this thread ... it is one man's story of getting his Orange unlocked and 'sorted'
http://forum.xda-developers.com/showthread.php?t=386089
With an happy ending

Ok having problems trying to unlock my orange tytn2. Hard SPL is installed, Step 1 of the kaiser simunlocker has been done and verified. Following the instructions, I have reset the phone to boot screen and went to step 2, step 2 of course is a command and in xp this closes as soon as you open it. Have went to command prompt to run step 2 and it gives an error about unable to connect to usb: cannot connect to \\.WCEUSBSH001
Anyone any ideas am now stuck lol.

please ignore sorted now helps when you actually read forums lol

bricked herald ??

hello could anyone help me ?
my device is stuck in bootloader and its recognized by the PC
this happened when i was trying a cooked rom
IPL 1.09.0001
SPL (ditto)
I searche everywhere an there seem to be only ways out for people with SPL 4.00.xxxx
is there a way out ??
thank you

sorry fr the bump but i really need help
I tried placing the phone in bootloader and installing the official HTC rom
but i get an ERROR 300
and the percentage is stuck at 0 on the screen

Try to flash your device with the Stock ROM.
That usually works

He already tried this, but it didnt work.
Let me just quote a post from dougstoner:
dougstoner said:
Well, yes and no. In the long run, it's better to Hard spl your phone. A lot of the roms in the forum require hard spl first. If you somehow fail during the hard spl, then you end up with a "brick". I used the uspl method first to flash, and it was a little easier to do, but hard spl'ing insn't complicated either. You just have to make sure of your ipl number is higher than 4. You can check this by holdign down the camera button, and press the soft reset button (use the stylus on the side to press) and continue to hold the camera button until you get to what's called the bootloader screen. It's red, blue, and green. Here are the instructions for hard spl, but MAKE SURE your ipl number is hight FIRST. If it isn't, you will brick your phone.
I case of people who don´t read 200 post and still brick their device - here is the guide that worked for ALL people with:
HTC P4350
XDA Terra
WING
with IPL 4.xxx and higher!!! (that is IMPORTANT)
and then follow this:
Default
For me it was working when:
1. install canonyang.cab
2. install aserpolicy.cab
3- install disablesecurity.cab
4. SOFTRESET
5. run RUU from Hard-SPLWM6 folder verison 4.70.yang
6. screen will become white - WAIT until it reboots itselfe.
7. done!
check if SPL now is 4.70.yang
Fore sure: I used this
http://rapidshare.de/files/38148213/...l_WM6.rar.html
mirror: http://www.sendspace.com/file/ot8zsn
It worked for many others, too.
Click to expand...
Click to collapse
So the IPL should at least be 4.xx but as you posted yours is 1.xx?! Might this be the issue?

Unfortunately, a SPL of 1.x after a hardspl/USPL means that the phone has been permanently bricked. Did you try to hardSPL your device or use USPL? They're both only compatible with 4.x SPL's.
I saw that someone recently came up with a way to fix bricked phones. They weren't Heralds, I forgot what they were... They basically found a way to use a buffer overrun on the SPL to launch code so they could launch a patched SPL and reflash... i wonder if our SPL's have that same bug and the method could be applied to us, too.

hey,
if my Herald is IPL 1.xxx can I somehow make it a 4.xxx? Or is there no chance to flash other roms? What does the IPL depend on? Production date?

thanks everyone for your patient replies
I guess for IPL 1.x there seems to be no solution as of now !!!
it was actually working initially with touch IT after Hard spl but i wanted to give a try to another version of touch it thats when the device got bricked .

I feel really sorry for you, but dont give up yet. As ivanmmj said, there could be a solution. Just check the forum.

I am not sure whether it helps but I did a little search and found severals threads:
Fix Bricked HTC ELF/ELFin
Someone with the same ERROR300 as yours
good luck

xtc.sanchez said:
I am not sure whether it helps but I did a little search and found severals threads:
Fix Bricked HTC ELF/ELFin
Someone with the same ERROR300 as yours
good luck
Click to expand...
Click to collapse
thanks so much mate !!! I will look into it right away

iv done all the reading
iv heard there was a way to flash the ROM through SD so i did try using
HERAIMG.nbh for the official rom from the HTC website !!
somehow the ROM does not work (invalid rom)
id try a couple of roms !!maybe ill be lucky !!
thanks again xtc.sanchez and everyone else
its been very informative and helpful

I can't tell if I have successfully Hard SPL'ed

Hi
I am having some problems when trying to upgrade my Orange SPV M700 to Hard SPL. I have followed the instructions given in "TrinityGuides.info" but I am not convinced the Hard SPL has actually worked okay. This is what happens:
1) I follow the initial instructions (run ROMUpdateUtility.exe) and click on the various screens ("I understand" "I completed") etc
2) I get to the point where the screen says "You are now ready to update your ROM image. This operation takes approximately 10 minutes"
3) I then click on "Next", the progress bar screen appears and I get the message on my SPV about running programs - I select 'yes' on the SPV.
4) Immediately I hear the Windows XP 'dum-dum' noise letting me know that a USB device has been disconnected. Also my ActiveSync is gone. I have not done anything to cause this though - the connection just goes down.
5) I then get a message telling me that the device is not connected and I have to exit the Hard SPL routine.
6) After reading the FAQs on TrinityGuides.info I re-run the "ROMUpdateUtility.exe" and get to the progress bar screen again. This time I see the grey screen on the SPV, with progress bar rapidly completing on both the SPV and my Desktop screen progress bar.
7) After literally a few seconds I get a screen telling me "Congratulations! Your ROM update is now complete etc"
Even though I see the congratulations message I am not convinced it has successfully installed Hard SPL.
Firstly, whereas the messages suggest it can take up to ten minutes to do the Hard SPL mine only takes a few seconds. Secondly, when I follow the TrinityGuides.info instructions on how to check the Hard SPL (by pressing power, camera and soft reset) I see this:
On my tri-colour screen this is displayed:
IPL-0.50
SPL 1.07.0000
The "TrinityGuides.info" instructions say that I should see this:
TRIN100
IPL-0.50 (your device may show IPL-1.00)
TRIN100 MFG
SPL-1.20.Olipro
I have tried both the "Hard SPL 1.20.Olipro" and "Des' Crash-Proof SPL" but nothing makes any difference to the display I see.
Can anyone help me? I am concerned that if I don't have the Hard SPL correctly installed I am going to risk bricking my SPV if I try upgrading the ROM, unlocking the SIM etc (which is what I want to do). Is there any other way I can tell whether Hard SPL is installed correctly?
Thanks in anticipation!
Spivvy

If i remember correctly hard SPL is a quick process, it's the ROM flashing that takes ten minutes or so. As to why it's not working i can't offer any help, sorry.

Hi DeeDee
Thanks for taking the time to reply. If, as you say, the Hard SPL does happen very quickly (in my case it seems a second or so) then that's good to hear as I was sure something had gone wrong.
Does anyone know if what I see on my tri-colour screen is correct? (i.e. IPL-0.50, SPL 1.07.0000) as before I proceed with any more drastic updates I'd like to make sure my SPV is protected against bricking.
Thanks again
Spivvy

UPDATE.....
I spotted this person's solution to what seemed to be a similar problem to mine:
http://forum.xda-developers.com/showthread.php?t=382246&highlight=ActiveSync+disconnects
I decided to try his fix. I used Olipro 1.20 Hard SPL.
The Hard SPL procedure did continue in a more convincing manner than my previous attempts, and the progress bar took a bit longer to complete, and I also received a message telling me that the operation was successful. I then did a soft reset and felt that maybe this time it had worked.
In a rare moment of feverish optimism I pressed the buttons to check the SPL version now on my Orange SPV (power, camera and soft reset). However, it is still telling me this:
IPL-0.50
SPL 1.07.0000
i.e. nothing seems to have changed. No sign of Olipro's SPL again.
In a word, I am flummoxed.
In two words, I am very flummoxed.
So, I am still putting out an appeal to you clever bods as to how I establish if I have a safe Hard SPL on my Orange SPV, or is it still looking a bit iffy (a technical term for "not very good")
Thanks
Spivvy

i am seeing the latter version with OliPro SPL, OK it's v1.2 but it's still different from yours.
Are you trying this on Vista or XP, personally i have always used XP for flashing. Whether that's going to make any difference i don't know.

I have a question along similar lines, although not identical. I'm completely unable to get from the triband screen to the bootloader screen. I'm trying to flash from my mini-SD card, but one it gets into that SSPL triband screen, it doesn't do a thing. I'm running vista on my PC, and can't seem to get any useful action trying to flash from there. Getting a little frustrated, cause I haven't even been able to SIM unlock my phone so far... Considering going the IMEI route, although that won't do anything for bootloader and upgrapding ROM later on... Any advice, or should I just use IMEI and go the easy way?
Dan

Hi DeeDee
I am using Windows XP, which I think is the preferred OS for this type of operation. Very puzzling.
Thanks
Spivvy

Hmmmm.....
It's looking like I am not going to resolve this problem as no one has posted an actual solution. I am not sure what to do now - my gut feeling is that my SPV M700 has not been Hard SPLed (based on what it displays as described earlier).
All I know is that I have followed the TrinityGuides instructions (and other postings with information about this type of thing) accurately. I have done it several times (using both Olipro 1.2 and Des Crash Proof) - but, for some inexplicable reason, my SPV M700 would appear to refuse to accept the Hard SPL.
As no one has said otherwise I have to assume that the tri-colour screen information I see in bootloader mode does mean that I have not successfully SPLed?
I can't understand why some (in fact most) people seem to get the Hard SPL flashing performed okay and yet mine refuses. I know from searching the postings that there are a few unlucky souls like me who have not been able to do it successfully.
If anyone does have any suggestions I really would be grateful to hear them, but for now it looks like I have drawn a blank. Pity.
I have run out of ideas - could it be some other program I have installed is interferring with the process? Is it my version of ActiveSync (4.5.0)? Is it some setting I have got on the SPV M700 that is preventing the Hard SPL? There surely has to be a reason why the Hard SPL is not working?
Still hanging on, hoping that some shaft of light might shine on my SPV M700 one day...
Ho hum...
Spivvy

Hey u are not alone, my Trinity ( Dopod D810 variant ) just simply refuses to flash to any hard spl as well, same problem as yours, i am using windows xp to flash so i doubt its the driver problem.
I found a solution to this problem though, i use SSPL to flash cooked rom to my device.
http://forum.xda-developers.com/showthread.php?t=293632
Just paste the .exe onto your trinity and open it using file explorer, it should enter bootloader with a "by des" behind the bootloader number, it should be safe to flash then.
I tested flashing WM 6.5 by savesaint, Finix's 6.1 with no problem
ADDons: Anyway the reason i suspect is because my one has been flashed with HTC P3600 rom, yes, by HTC without dopod branding, hence the problem

Hi there - thanks for that tip. I will try that link you suggested, and have a go with the file. I'll get back to let you know how it all went.
Many thanks for taking the time to post your suggestion.
Cheers
Spivvy

Hi
I thought I would report back as to the progress (or lack of it) regarding the failure to Hard SPL my Orange SPV-M700. There's not much to report I'm afraid, which may be largely to do with my lack of confidence etc.
I checked out the link suggested above by "/b/-TarD" (using SSPL to flash cooked rom to device - as described at:
http://forum.xda-developers.com/showthread.php?t=293632
However, when I read the various posts and experiences I still felt that this might not be the solution I was looking for. I am not very technical with all this ROM flashing but the original Hard SPL method seemed to me to give me some insurance against bricking my SPV-M700. This SSPL does not seem to leave you with a Hard SPLed device (I am not exactly sure what it does to be honest), and in fact some people seem to have had quite difficult problems after using it.
Call me a cowardly old geezer but I have backed away from trying the suggested solution at the moment (but still very grateful to user "/b/-TarD" for his suggestion).
My aim was to:
1) Get the basic HARD SPL on my SPV-M700 - Olipro or Des, but having followed all the Trinity guides faithfully, it would appear that my device doesn't wanna play ball with me — very frustrating.
2) Re-instate/upgrade the GPS radio thingy (which I believe you lose after you Hard SPL)
3) Unlock my Orange SPV-M700 so that I can use any SIM card in it
4) Then, finally, consider upgrading the ROM to one of the newer WM6 versions, or a better WM5 version.
But, at the moment, it would seem that it's not to be.
Ho hum....

Noob seriously stuck. help. (SPL Flashing)

Am trying to follow the instructions in the sticky but something happens with my setup that isnt to clearly explained in them and hence so far ive been unable to complete this.
When opening the Hard SPL update exe i get a message saying its loading an api cab onto phone and to ok this.. so i do, then click though a few more steps but hit a block as the api thing loaded on the phone is asking me if i want to run it as its for a different model of phone.
Then I hit yes to run it, move more steps in the Hard SPL flasher and get rainbow screen on phone
Then nothing.. flasher gives error that flash cant continue.
Hardware model is Jade 110, stock SPL is 1.71.0000 and its an Orange branded Jade.
Help.. please

@Xs1nX
hi
im not sure but i think the HSPL is for jade 100(touch 3G)
and spl 1.4.000 ur spl is different and ur jade is 110
maybe thats why its not working this is my suggestion not not a techie im just going by me experience and
1. u need to have net connection while doing HSPL
2.u need to turnoff ur firewall and any virus scan on ur comp to do the same
goodluck
NOTE : ironegle has replied in the HSPL section chek and do the needfull
Xs1nX said:
Am trying to follow the instructions in the sticky but something happens with my setup that isnt to clearly explained in them and hence so far ive been unable to complete this.
When opening the Hard SPL update exe i get a message saying its loading an api cab onto phone and to ok this.. so i do, then click though a few more steps but hit a block as the api thing loaded on the phone is asking me if i want to run it as its for a different model of phone.
Then I hit yes to run it, move more steps in the Hard SPL flasher and get rainbow screen on phone
Then nothing.. flasher gives error that flash cant continue.
Hardware model is Jade 110, stock SPL is 1.71.0000 and its an Orange branded Jade.
Help.. please
Click to expand...
Click to collapse

Managed to get the flash to work .. wooo
My Touch 3G is now happly running Jade Overloaded.

Xs1nX said:
Managed to get the flash to work .. wooo
My Touch 3G is now happly running Jade Overloaded.
Click to expand...
Click to collapse
Hi there,
I have the same problem as you in trying to flash my Jade 110.How did you manage to do it?

Please use the relevant sticky for these questions.
Dave

tytn 2 help (i'm new >.<)

hi...
i need some help here...
i'm using kaiser TYTN 2...
WM 6.1
ROM ver. : 3.29.707.0
radio ver : 1.65.16.25
protocol ver : 25.83.40.02H
any ROM i can flash now (i want to upgrade my phone, so slow)
how to flash ROM?
can i upgrade to WM6.5?

Read this first
http://forum.xda-developers.com/showthread.php?t=433835
This will tell you everything you need to know. You will need to flash HardSPL onto your phone first then you can start flashing radio's and rom's till you find the one you like.
Blinky

Blinkydamo said:
Read this first
http://forum.xda-developers.com/showthread.php?t=433835
This will tell you everything you need to know. You will need to flash HardSPL onto your phone first then you can start flashing radio's and rom's till you find the one you like.
Blinky
Click to expand...
Click to collapse
sorry...what mean by stuck on bootloader screen?
is mean my phone stuck at when i start-up my phone...
or stuck at the 4 colour screen with SPL version?
for my phone...
it just stop at the 4 colour screen with SPL version 3.29..
and i need to use stylus press the reset button to restart it...
is this mean need to re-flash my SPL?

All reqd info avail through search
jordanjoker said:
for my phone...
it just stop at the 4 colour screen with SPL version 3.29..
and i need to use stylus press the reset button to restart it...
is this mean need to re-flash my SPL?
Click to expand...
Click to collapse
If that's all you can get from your phone then indeed it's at the bootloader screen. Try reading the Kaiser Stuck at Bootloader (aka Tri Color or Red, Green, Blue Screen)? Solutions Here thread - took me about 20 s to find using search. ALL the info you need is here if you browse the wiki thoroughly and search. Good luck with your searching and reading up!