Database Develop

Maybe CID Lock problem ? NEED HELP !!!!

Hi, After the soft reset comand, I removed the battery from my Wizard. After that the followin problem was appear: the phone is bringing up to the splash screen and STOP on this position.I have tried to download another Rom but the problem still is the same. My Phone is not CID unlock and before this, I cooked own rom like is writen here http://forum.xda-developers.com/showthread.php?t=271043 . So any idea how to wake-up my phone MDA Vario.

Ok forgive me if I'm wrong here, I don't really want to judge before I know the full story, but seems to me your brain went on strike momentarily. First rule of flashing any unofficial rom CID UNLOCK YOUR DEVICE. Anyways sorry, I just wanted to say something so it doesn't happen to you again, that said, what rom did you try to upgrade to? what rom did you try to downgrade to after that? is your device a G3 or G4?
If your device is a G3 I would recommend downgrading to this rom by xelecin
ftp://xda:[email protected]_RUU_Wizard_1081002_108_10910_ENG_US.exe
it will ask you if you want to CID unlock your device at the start so you shouldn't need to worry about forgetting this time , if you can't connect your device to activesync just go into the bootloader (hold the camera, voice dial buttons while pressing the reset button) and once it connects run the set-up.
Oh another thing before I forget..... do some searching and read up a bit, because this is a pretty common topic on this forum, best of luck and hope everything works out ok. If not, report back.
*edit* I just noticed the thread that you linked to, I actually wasn't aware that this was possible, but anyways I think it's still much safer to CID unlock your device if possible, and another thing you might try replying in that thread if it doesn't work out since they should be more knowledgeable in the matter..... and that would help keep the forums less cluttered *edit*

Thanks, for your help, Unfortunately you are totaly right for my stupid act (again). At first i tried to solve the problem alone , but whole day I roam through this forum to find solution but I can't find the same problem like my. Maybe because of my ..... brain .Anyway I am with G3. NOW I have
IPL 1.0
SPL 2.26
GSM 01.09.11
OS 1.5.4.2
This is after this procedure http://forum.xda-developers.com/showthread.php?t=263116
I tried also to download also and Molski's 2.26.10.2 AKU2.3 Rom a.k.a. 2.26.10.2 Final Edition Rom, but the problem is the same : The splash screen is running and STOP and.... nothing.
I can go to bootloader and can download new rom, but I can't start fhe phone.

Yeah I know these forums aren't the easiest in which to look for info. So you can go into the bootloader, that's good. Don't try to go to a AKU2.x rom or later, keep it under that, so no 2.26 roms at all. 105, or 108 roms should be good.
Did you try the rom from the link I provided or the one on the thread? and afterwards did it go into the phone at all? My friends MDA had a similar problem last week, caused by the same thing, though in your case I see the SPL isn't updating when you install new roms on his it was the os that wasn't updating, but as soon as I installed that rom I recommended it booted up fine, then I updated his device to molski's 2.3.
I'll check back in a few so let me know how's it going.

Here's what you need to know & if you follow these instructions your prob will be solved.
The Definitive Guide to Unlocking & Rom Upgrading G3 Wizards
http://forum.xda-developers.com/showthread.php?t=285435
Wish u best of luck.

DoCtOr_X said:
Here's what you need to know & if you follow these instructions your prob will be solved.
The Definitive Guide to Unlocking & Rom Upgrading G3 Wizards
http://forum.xda-developers.com/showthread.php?t=285435
Wish u best of luck.
Click to expand...
Click to collapse
Ok, but tell me how to solve this :
"qiote"
8. Open ActiveSync, Explore and copy enablerapi.cab from your PC's C:\ (remember that's where you extracted lokiwiz to...) to you device, I don't care where.
9. Pick up your PDA, File Explorer, find the enablerapi.cab and click it.
"quote"
I don't have access to the phone explorer and phone at all.
masr1979 I have tried the rom you give me, but it look like there is some things I don't understand: When I start the exe file i have choice <continue> .Whet I type <c> 2(two) time the soft tell me <no device found> and order me to continue with copy ???. After few seconds tell me that Unlocker ..... Done!, and start HTC wizard Unlocker and NOTHING !!! Stop on this position more then 15 min. and only the led for charging on the phone is active.

Forget all about unlocking. Until you can boot the device completely it'll never work.
Try and install an official 2.x ROM on your device.
My suspicion is that you originally has a G4 device, which is bad because if you DID have a G4 you have a brick now...

Can you remember your phones old ipl/spl? for your sake I hope it wasn't something in this format 2.XX.000X.

masr1979 said:
Can you remember your phones old ipl/spl? for your sake I hope it wasn't something in this format 2.XX.000X.
Click to expand...
Click to collapse
Of course I'm not sure, but I thing it was 2.21. Anyway did you think that is posible to cook my own rom in G4? I'm totally confused.
Every time when I upload new rom I have this:
http://forum.xda-developers.com/attachment.php?attachmentid=32884&stc=1&d=1168184491
IMG_2976.jpg
...and also this is my bootloader screen
http://forum.xda-developers.com/attachment.php?attachmentid=32885&stc=1&d=1168184491
IMG_2977.jpg

Dr Puttingham said:
Forget all about unlocking. Until you can boot the device completely it'll never work.
Try and install an official 2.x ROM on your device.
My suspicion is that you originally has a G4 device, which is bad because if you DID have a G4 you have a brick now...
Click to expand...
Click to collapse
Thanks, but I try to find oficial rom but without success. And very interesting thing I found.. when I start to upload new rom the soft start to check my old rom and after that tell me that i have GE (german) language, but my old was WWE ?
Is it posible some one to give me some link to official 2.x ROM but for T-mobile german language.

Well the other day I tried finding that german rom for a while.... that search was going nowhere, I saw this thread, I don't know if you might want to check into it and maybe try it out. There's mixed results apparently but who knows
http://forum.xda-developers.com/showthread.php?t=276963

[Walkthrough] How to fix your bricked phone

So, you've decided that your shiny new toy isn't very well setup by default. You flashed a ROM and lo and behold, you missed some instruction somewhere and now you think it's bricked.
Here's the good news:
It's not bricked!!
Bricked means that it's dead and it's in no way or shape recoverable.
There is still a chance. (As long as you didn't try to hardSPL with another Device's SPL...)
All you have to do is:
For the WING:
Hold the Camera button and WHILE holding it, soft reset the device (that means press the little hole above the memory card with the stylus.) That will bring you to the bootloader. Now download the appropiate RUU and run that program. A few minutes later and your new shiny toy is back to it's crappy OEM but working self!
I'll put in links for those who can't find them...
Here's tmobile's ROM.

WOW! That´s all??
Ok - then provide us a link to a XDA Terra RUU!!!!!!
hahahaha. Thanks for this help. Maby for some people it is usefull - but written 1000 times before.
ivanmmj said:
So, you've decided that your shiny new toy isn't very well setup by default. You flashed a ROM and lo and behold, you missed some instruction somewhere and now you think it's bricked.
Here's the good news:
It's not bricked!!
Bricked means that it's dead and it's in no way or shape recoverable.
There is still a chance. (As long as you didn't try to hardSPL with another Device's SPL...)
All you have to do is:
For the WING:
Hold the Camera button and WHILE holding it, soft reset the device (that means press the little hole above the memory card with the stylus.) That will bring you to the bootloader. Now download the appropiate RUU and run that program. A few minutes later and your new shiny toy is back to it's crappy OEM but working self!
I'll put in links for those who can't find them...
Click to expand...
Click to collapse

papamopps said:
WOW! That´s all??
Ok - then provide us a link to a XDA Terra RUU!!!!!!
hahahaha. Thanks for this help. Maby for some people it is usefull - but written 1000 times before.
Click to expand...
Click to collapse
I know it has been stated a million times. I'm just tired of the same question being asked over and over again and so here we are...

Too bad it'll be stated a million more times afterwards too.

falconeyez said:
Too bad it'll be stated a million more times afterwards too.
Click to expand...
Click to collapse
If we sticky it and threatened their lives if they don't read it... lol

ivanmmj said:
For the WING:
Hold the Camera button and WHILE holding it, soft reset the device (that means press the little hole above the memory card with the stylus.) That will bring you to the bootloader. Now download the appropiate RUU and run that program. A few minutes later and your new shiny toy is back to it's crappy OEM but working self!
Click to expand...
Click to collapse
It will not help!

ASerg said:
It will not help!
Click to expand...
Click to collapse
And we hold their pet's hostage?

ivanmmj said:
And we hold their pet's hostage?
Click to expand...
Click to collapse
Or better yet, tell them to send us their phones, then we "unbrick" them and sell them on eBay.

falconeyez said:
Or better yet, tell them to send us their phones, then we "unbrick" them and sell them on eBay.
Click to expand...
Click to collapse
Might work out, I get 10% of the over all sold
Ghostrider

Ghostrider said:
Might work out, I get 10% of the over all sold
Ghostrider
Click to expand...
Click to collapse
Fine, but I get 15% because it's my thread.

The instructions to do this are actually in my newbie thread. Which is a sticky.

TylerC161 said:
The instructions to do this are actually in my newbie thread. Which is a sticky.
Click to expand...
Click to collapse
I know, but most people don't search. I figured, maybe if it says "How to fix your bricked phone" on the title, they might get the idea.
It was actually done mostly as a joke...

help
I used the hardSPL from this thread..
http://forum.xda-developers.com/showthread.php?t=358225
It worked successfully and I was able to restart into WM6. Then I tried loading the TouchIT 4.4 and it installed cleanly with no errors. But when I went to restart it, my Wing just sits there at the CanonYang boot screen and never changes.
I tried using the steps here to restore the tmo default rom, but it after 1% on the progress bar, the screen goes blank and the CanonYang screen comes back. Is there anything I can do?
edit: I can get to the bootloader screen with the color bars. I'm not sure if this additional info will be of any help.
IPL 4.10.0002
SPL 4.70.Yang

gumbico said:
I used the hardSPL from this thread..
http://forum.xda-developers.com/showthread.php?t=358225
It worked successfully and I was able to restart into WM6. Then I tried loading the TouchIT 4.4 and it installed cleanly with no errors. But when I went to restart it, my Wing just sits there at the CanonYang boot screen and never changes.
I tried using the steps here to restore the tmo default rom, but it after 1% on the progress bar, the screen goes blank and the CanonYang screen comes back. Is there anything I can do?
edit: I can get to the bootloader screen with the color bars. I'm not sure if this additional info will be of any help.
IPL 4.10.0002
SPL 4.70.Yang
Click to expand...
Click to collapse
SPL 4.70.yang!!! your device is HARD-SPL!!
So going back to stockrom--> delete the SPL.nbh from EVERY RUU you are running.
Then it shouldn´t stop......

Big Thanks papa! That did the trick. My Wing is happy once again and running Open Touch. But I still want to give TouchIt another try.

And what if i cant find stock RUU mine came with some arabic keyboard and spl was 1.08 , thanks to Oli he didnt mention that SPL should be 4 or higher , so device is bricked since first Olis release and no way to find this arabic stock RUU.
Any Help ?????
Hitec

If the device had an spl of 1.08 prior to HardSPLing it, then you'll have to bring the device to your nearest repair center. There isn't a way around that. Oli doesn't know everything and that's the risk we take when we try new and experimental things that people create but have no way of testing. But, we live and learn. If it wasn't for that issue, you could always cook your own ROM and if the HardSPL was working, you could've easily flashed any ROM. But the keyboard wouldn't been wrong until you could find someone who had the correct keyboard and you extracted the ROM from it and cooked that keyboard driver into your ROM.

Oh noooo!!
Hi ivanmmj,
I used your guide to flashing my HTC P4350 at http://forum.xda-developers.com/showthread.php?t=358615.
It was in French and I wanted it in English. So I downloaded one of the official HTC ROMs "HTC_P4350_WWE_4.17.405.2_4.1.13.44_02.94.90_Ship.exe" assuming this was the English one because all the others couldn't have been.
I copied the "RUU_signed.nbh" from the above HTC ROM and put it into the RUU folder as instructed by yourguide (I didn't copy the SPL.nbh file). I then ran the herald-uspl.exe and everything went fine until the RUU utility stopped with the error "invalid vender ID".
The RUU exited without completing, now all I get when the device boots is the screen giving my IPL (1.08.001) and SPL (1.08.001). How do I flash another ROM from this state? I can't do it the "normal" way because ActiveSync can't see the device. When I try to use the RUU tool that comes with your tool, the progress bar shows then it says the tool can't be used with my device.
Someone please help!

foo_bar_baz said:
Hi ivanmmj,
I used your guide to flashing my HTC P4350 at http://forum.xda-developers.com/showthread.php?t=358615.
It was in French and I wanted it in English. So I downloaded one of the official HTC ROMs "HTC_P4350_WWE_4.17.405.2_4.1.13.44_02.94.90_Ship.exe" assuming this was the English one because all the others couldn't have been.
I copied the "RUU_signed.nbh" from the above HTC ROM and put it into the RUU folder as instructed by yourguide (I didn't copy the SPL.nbh file). I then ran the herald-uspl.exe and everything went fine until the RUU utility stopped with the error "invalid vender ID".
The RUU exited without completing, now all I get when the device boots is the screen giving my IPL (1.08.001) and SPL (1.08.001). How do I flash another ROM from this state? I can't do it the "normal" way because ActiveSync can't see the device. When I try to use the RUU tool that comes with your tool, the progress bar shows then it says the tool can't be used with my device.
Someone please help!
Click to expand...
Click to collapse
Oh wow. I'm so sorry. I think I may have forgotten to put up a warning for people that have an SPL lower than 4.0. Was your SPL lower than 4.0? If it was, you cannot use the USPL OR the HardSPL and they end up writing part of the ROM over your current SPL and brick the device. This, unfortunately, needs to be fixed by your local repair center. I'll talk to the Mods about unlocking that thread so that I can update it.

ivanmmj said:
Oh wow. I'm so sorry. I think I may have forgotten to put up a warning for people that have an SPL lower than 4.0. Was your SPL lower than 4.0? If it was, you cannot use the USPL OR the HardSPL and they end up writing part of the ROM over your current SPL and brick the device. This, unfortunately, needs to be fixed by your local repair center. I'll talk to the Mods about unlocking that thread so that I can update it.
Click to expand...
Click to collapse
Oh deary me! I am so dead now - I live in Tanzania, East-Africa. My "local" repair center is several hundred thousand miles away across The Big Blue. What exactly do the repair center folks do to fix the device? Perhaps I can soldier out myself with some guidance...
Thank you,
foo_bar_baz.

bricked herald ??

hello could anyone help me ?
my device is stuck in bootloader and its recognized by the PC
this happened when i was trying a cooked rom
IPL 1.09.0001
SPL (ditto)
I searche everywhere an there seem to be only ways out for people with SPL 4.00.xxxx
is there a way out ??
thank you

sorry fr the bump but i really need help
I tried placing the phone in bootloader and installing the official HTC rom
but i get an ERROR 300
and the percentage is stuck at 0 on the screen

Try to flash your device with the Stock ROM.
That usually works

He already tried this, but it didnt work.
Let me just quote a post from dougstoner:
dougstoner said:
Well, yes and no. In the long run, it's better to Hard spl your phone. A lot of the roms in the forum require hard spl first. If you somehow fail during the hard spl, then you end up with a "brick". I used the uspl method first to flash, and it was a little easier to do, but hard spl'ing insn't complicated either. You just have to make sure of your ipl number is higher than 4. You can check this by holdign down the camera button, and press the soft reset button (use the stylus on the side to press) and continue to hold the camera button until you get to what's called the bootloader screen. It's red, blue, and green. Here are the instructions for hard spl, but MAKE SURE your ipl number is hight FIRST. If it isn't, you will brick your phone.
I case of people who don´t read 200 post and still brick their device - here is the guide that worked for ALL people with:
HTC P4350
XDA Terra
WING
with IPL 4.xxx and higher!!! (that is IMPORTANT)
and then follow this:
Default
For me it was working when:
1. install canonyang.cab
2. install aserpolicy.cab
3- install disablesecurity.cab
4. SOFTRESET
5. run RUU from Hard-SPLWM6 folder verison 4.70.yang
6. screen will become white - WAIT until it reboots itselfe.
7. done!
check if SPL now is 4.70.yang
Fore sure: I used this
http://rapidshare.de/files/38148213/...l_WM6.rar.html
mirror: http://www.sendspace.com/file/ot8zsn
It worked for many others, too.
Click to expand...
Click to collapse
So the IPL should at least be 4.xx but as you posted yours is 1.xx?! Might this be the issue?

Unfortunately, a SPL of 1.x after a hardspl/USPL means that the phone has been permanently bricked. Did you try to hardSPL your device or use USPL? They're both only compatible with 4.x SPL's.
I saw that someone recently came up with a way to fix bricked phones. They weren't Heralds, I forgot what they were... They basically found a way to use a buffer overrun on the SPL to launch code so they could launch a patched SPL and reflash... i wonder if our SPL's have that same bug and the method could be applied to us, too.

hey,
if my Herald is IPL 1.xxx can I somehow make it a 4.xxx? Or is there no chance to flash other roms? What does the IPL depend on? Production date?

thanks everyone for your patient replies
I guess for IPL 1.x there seems to be no solution as of now !!!
it was actually working initially with touch IT after Hard spl but i wanted to give a try to another version of touch it thats when the device got bricked .

I feel really sorry for you, but dont give up yet. As ivanmmj said, there could be a solution. Just check the forum.

I am not sure whether it helps but I did a little search and found severals threads:
Fix Bricked HTC ELF/ELFin
Someone with the same ERROR300 as yours
good luck

xtc.sanchez said:
I am not sure whether it helps but I did a little search and found severals threads:
Fix Bricked HTC ELF/ELFin
Someone with the same ERROR300 as yours
good luck
Click to expand...
Click to collapse
thanks so much mate !!! I will look into it right away

iv done all the reading
iv heard there was a way to flash the ROM through SD so i did try using
HERAIMG.nbh for the official rom from the HTC website !!
somehow the ROM does not work (invalid rom)
id try a couple of roms !!maybe ill be lucky !!
thanks again xtc.sanchez and everyone else
its been very informative and helpful

8125 bootloader stuck

ok, im inbetween a newb and a full out destructive force to any type of moddable device and im having a little bit of trouble with my cingular 8125. ive had this phone for a few months and i am having the hardest time dealing with the rom on the phone now. ill give a quick breifing on it:
got it with original cingular rom, not sure what spl or ipl on it but the first thing i did was unlock it by myself, cid and sim unlocked, and then updated to a jaguar wm 6.1 rom which worked fine. decided i was going to unfortunately sell this phone so i decided to upgrade it one more time to see if i really wanted to sell it, i then bought the upgrade to go past my 2.21 ipl and spl. i got my unlocker and followed my instructions and got a brick. but not a full brick. its stuck in the bootloader screen. after reading countless threads, i learned that i should be able to just still update a rom to the phone with no problems which actually works, but as soon as a rom completes it goes right back to my bootloader screen so help me! please cuz now thats its a challenge again, i want the phone! plus all my info is on the phone still back up

Flash the official stock ROM first, then use Button's ROM to downgrade your IPL and SPL before unlocking CID.

post the present IPL/SPL it displays now.Which rom you are trying to flash now ?

ok when i try to put the most current 8125 rom on my phone (2.25.blah) it tells me that its not the same phone which is weird but thats preventing me from putting the original rom on the phone. however if i try and put the buton rom on the phone now, it will go through completely and say it put it on the phone, but when it restart, its right back to the bootload screen...
and im running IPL 2.21.0001 and SPL 2.21 with a previous installation of a jaguar rom, dont know exactly which one, but i know it was a jaguar rom. but right before i tried to upgrade the updater, i went back to my default WM5 rom so i guess it was te basic 2.21 rom on the phone with WM5

dimedash12 said:
ok when i try to put the most current 8125 rom on my phone (2.25.blah) it tells me that its not the same phone which is weird but thats preventing me from putting the original rom on the phone. however if i try and put the buton rom on the phone now, it will go through completely and say it put it on the phone, but when it restart, its right back to the bootload screen...
and im running IPL 2.21.0001 and SPL 2.21 with a previous installation of a jaguar rom, dont know exactly which one, but i know it was a jaguar rom. but right before i tried to upgrade the updater, i went back to my default WM5 rom so i guess it was te basic 2.21 rom on the phone with WM5
Click to expand...
Click to collapse
WEIRD !
You got mixed Bootloaders of G3 And G4,IPL 2.21.0001 is G4 and SPL 2.21 is G3,as you posted,well,can't say which was original,only you can tell,but some how its mixed Bootloaders,in this situation no Rom will flash,its a 'Brick'.

If as Zabardast says its bricked then you have three options:
1. Get a new Wizard
2. Get a new Wizard Motherboard
3. Get a Wizard with broken LCD from eBay and replace its LCD with your current one and Enjoy!!! (Cheapest)

lol this is tough! but no worries, ill be back with some other pda at some point and time and then ill try and take this phone apart! but the weird thing about my wizard is that this only happened when i tried to update the phone with the CID unlock program that you have to pay for!
lol it was perfectly fine until i tried to do it! oh well, back to my crappy p168!

May be that CID Unlock program was not meant to be for a G3 and you were updating a G3 so it mixed you IPL/SPL and caused a kinda BRICK. So please be careful before doing flashing things because if you dont be carefull then your PPC may become a heavy paper weight, and a costy one too. LOL. TC

kitty4uhig said:
Farming for eq2 plat isn't easy, but you can buy eq2 plat, guides, accounts & items on sale. We have revolutionized the exchange of money to eq2 plat. Purchase eq2 plat& power up your character ot the next level. Our world class customer service will make sure you are more than satisfied with every purchase. Feel free to contact our 24 hour live support with any questions you may have. Shop now and play as a VIP!
Click to expand...
Click to collapse
Stop this nonsense immediately,otherwise it'll be reported and you'll be banned.Its spam !!!

try this: http://forum.xda-developers.com/showthread.php?t=276963

Cingular 8125 problems
Ok guys i am really pissed i have been looking for three days and cant find it, first off my IPL is at 1.01 and the SPL is at 2.25 and i cant fix it i wanted to install the original 2.25 again and start from scratch but can not find the damn thing so if anyone has it can u just upload it fo me and give me a link that i can get it at please i am sick and tired of waitnin i really like this phone and i dont want to risk bricking it thanks.

Ok, grimgod, aggression is reaaaallly ugly and no freakin one will help with that sh!t attitude (pardon the language, mods). The senior members do everything they can to help the noobs. Have you tried reading the flashing guide, wiki, or tutorial? I'd bet even money you haven't. Have you CID unlocked? Did you flash the button rom twice ( as the guide suggested to get ipl/spl both 2.xx)? Did you flash the official tmo rom (found im the flashing guide)? Have you done anything other than sit on your hands and wait for it to be handed to you? READ AND SEARCH!!!!!!!!!!!!!!!!

http://forum.xda-developers.com/showthread.php?t=310831 <HERE!!!!!!!!!! Should I flash your device, too?

Similar issue... need some Wizard Expertise
I picked up a coworkers old Cingular 8125 that he'd had in a drawer for about a year. Battery was right dead so the phone wouldn't boot. I charged the battery on an external charger for a few minutes, put it back into the phone, and plugged it in to the charger until the LED went green indicating a full charge.
When I power up I see the T-Mobile splash screen (light gray background, some square dots, and the "T-Mobile" logo). And there it stays indefinitely.
Tried a hard reset (Comm Mgr + Voice Cmd + Soft Reset), and it said "Press Send to restore factory default". Pressed the green dialer key (I assume that's send), and it says Format FAT partition, FAT partition complete, and then returns to the same T-Mobile splash screen and hangs there.
So then I tried putting it into Boot Loader manually (Power On + Camera). No problem, shows IPL 2.26 and SPL 2.26. Plug it into the computer USB port (running XP Pro), and then the USB connection shows on the phone. Attempted to flash the Wizard Love ROM to get this thing back to square-one. Error 260. Attempted to flash the T-Mobile stock ROM. Error 260.
Between each flash attempt, I'm pulling the battery out and starting fresh. I think I've followed all the steps I'm finding in multiple threads. But for some reason I'm not able to get this thing to communicate via USB. All RUU's give an Error 260. Am I missing something?

Forgot to mention I'm following the steps outlined in this thread from Dr P. To the letter!
Also did a little reading up on using the MTTY method in this thread by Drug_Store. Thought maybe the existing ROM might be intact, and I might be able get it to a 256MB MiniSD, then write the backup ROM from SD in boot loader. Well, for some reason I don't even see the USB connection option when I use the MTTY - can't ever get to a point where I can issue commands. Again, I think I'm following the instruction. But still no juice.

Nudge, nudge. I'd donate for a solution that works... otherwise I have to keep letting my 10 year old play The Quest on my phone.

Help my wm6.5 does not respond

Hello,
Iam daniel. My english is not zo good but i will try.
I have flashed my phone with hardspl 3.56.
After that i installed wm6.5 from josh Build 21198
Then i start up my phone and every think look richt.
Then my phone ask for a restart, zo i start up and there was my problem, he doesn't start up.
I see thee first screen with red letters at the bottom and he does nothing.
Can you help me???

Have you tried a hard reset?
Also, did you CID unlock your phone as well? I believe you have to be CID unlocked to flash a 6.5 ROM on your phone.

Had a same matter last day ago, after re-flash, all working fine

I didn't unlock my phone whit cid...
for a hard reset is it the two buttuns (with the lines on it) near the phone buttom?
And a reflash how does that work?
I have no communication with my pc know because he crased in the screen when you starting up. It is the first screen you see when you restart your phone.

Ok, a couple of things... this is the wrong forum to be asking in, and I bet a mod is going to shut this down at some point. You should try posting in the forum for the ROM you flashed.
What you need to do is grab a stock WinMo 6.1 ROM and flash via the SD card method, that should get you up and running again.
Then, you will want to run Olipro's SIM/CID unlocker. What this will do is fully unlock your phone so you can flash any ROM, radio, SPL, any! Be careful, though, since not all ROMs are meant for Kaiser... so make sure you are flashing stuff meant for Kaiser.
Once you run Olipro's unlocker, you will want to re-flash the 3.56HardSPL, then a new radio, then go ahead and start flashing any ROM from the Kaiser section.
WinMo 6.5 ROMs reqiure you to be CID unlocked, and that is why you are stuck where you are.
And yes, you are right with how to do a hard rest.

Thanks! I try this tommorow if it works, if it doesn't work i will post my problem in the forum for rom. But hopfully it works because if cot know a nokia 6500 and i can't without my qwerty