Database Develop

** Urgent ** my Wizard cant power on after upgrade ROM

Hi to all that can help me, i just flash the rom yesterday night that i have download and its completed the upgrade and go into the screen and running the installing of the program that come with the rom.
after the full install and the device restart without any more power and picture show.
I have try to charge the battery with wall charger and also replace with new battery but still no power.
Is that mean i'm flashing with a wrong rom and what should i do now.
Can i get it fix?

nicholas99 said:
Hi to all that can help me, i just flash the rom yesterday night that i have download and its completed the upgrade and go into the screen and running the installing of the program that come with the rom.
after the full install and the device restart without any more power and picture show.
I have try to charge the battery with wall charger and also replace with new battery but still no power.
Is that mean i'm flashing with a wrong rom and what should i do now.
Can i get it fix?
Click to expand...
Click to collapse
That really sucks...

nicholas99 said:
Hi to all that can help me, i just flash the rom yesterday night that i have download and its completed the upgrade and go into the screen and running the installing of the program that come with the rom.
after the full install and the device restart without any more power and picture show.
I have try to charge the battery with wall charger and also replace with new battery but still no power.
Is that mean i'm flashing with a wrong rom and what should i do now.
Can i get it fix?
Click to expand...
Click to collapse
which rom did u flash it with ??? wat ver ur configs before that . ur ipl/spl version os and etc.
sometime it happens that the power button doesnt works ....
try poking the reset button wiz ur stylus ... press and hold for sumtime and c wat happens
if it starts then ... press it again and wen the screen goes blank pree the camera button and hold it ... ull get into the bootloader ... den connect da usb and flash a new rom or da old factry one ...
i use molski's rom its really stable

well i'm using Wizard_Love_2.26.10.2_WWE_Novii+CF2 for the first but after that i just try to flash the rom the the chinese support rom which is Dopod_CHT_TW_RUU by using the newromupdateutility to flash it to my phone. At the beginning the rom flash successful and login to the device for install all the program that come with. After all the installation done the device will restart but never boot up anymore even u can see any green light flashing at all. Please dont tell me i damage my rom, should i send for repair?
or someone can help me out please......

nicholas99 said:
well i'm using Wizard_Love_2.26.10.2_WWE_Novii+CF2 for the first but after that i just try to flash the rom the the chinese support rom which is Dopod_CHT_TW_RUU by using the newromupdateutility to flash it to my phone. At the beginning the rom flash successful and login to the device for install all the program that come with. After all the installation done the device will restart but never boot up anymore even u can see any green light flashing at all. Please dont tell me i damage my rom, should i send for repair?
or someone can help me out please......
Click to expand...
Click to collapse
did u try da soft reset ???

yes i did but nothing happen at all

Xda Neo
I have the same problem. IPL and SPL 2.15.00001 and tryed to downgrade but after restart it does not power on. Tried everything but no way to power on. Is somebody know how to make it work again.
Regards,

You guys tried to flash a G3 Rom on your G4 Wizard.
So your bootloader (IPL/SPL) that is 2.xx.0001 is overwritten by a G3 bootloader that is 2.xx, so in other words....your devices are bricked.
Please someone, correct me if I am wrong.
Molski

yup, I agree. Bricked hopefully someone can fine the JTag on these devices.

Wow that sucks! Full moon over Miami last night, naw that can't be it .....
Sorry but unfortunately I must follow my Grandmother's advice concerning when I don't have anything nice to say...

R there NO ALTERNATIVE WAY for THIS?? HOPE we can help those people that made a mistake by upgrading to a ROM that doesnt fit to their WIZARD. due maybe because of TOO XCITEMENT they forgot to CHECK FIRST(PLS! ALWAYS CHECK FIRST) their IPL/SPL.
HOPE those master GURU's can do something!

So, please someone tell clearly how to know G3 or G4 of the Wizard
thanks so much

Sorry but I have no more tolerance for people who just jump in first without doing a little research. A while back when the G4 first came out we didn't know. Now everyone who puts out a ROM warns people about the possible consequences. And there's so many threads on just the first page with tales of woe... how can a person miss them all??
I'm sorry but my parents raised me to take responsibility for my own actions, as Baretta used to say" Don't do the crime if you can't do the time"
Similar to when a Cat 4 hurricane is coming at you and you don't leave after being warned.... then blaiming everyone but yourself...
And if anyone wants to rebute me on this, don't bother as I've neither the time nor the patience.
Bottom line is that flashing phones has the very real possiblity of trashing an expensive piece of hardware in a very short period of time. If one has any doubts, then they shouldn't do it! And if a person doesn't have a concern initially then they're asking for trouble.
Sorry....

magicer said:
So, please someone tell clearly how to know G3 or G4 of the Wizard
thanks so much
Click to expand...
Click to collapse
a G4 has a .00001 on the initial splash screen.

ArtXT said:
R there NO ALTERNATIVE WAY for THIS?? HOPE we can help those people that made a mistake by upgrading to a ROM that doesnt fit to their WIZARD. due maybe because of TOO XCITEMENT they forgot to CHECK FIRST(PLS! ALWAYS CHECK FIRST) their IPL/SPL.
HOPE those master GURU's can do something!
Click to expand...
Click to collapse
The problem is that if your bootloader (IPL/SPL) is fuc*ed up, there is no way to get it in bootloader mode to do a flash!
Only known solution is with JTAG connector, but that solution is not a clear solution yet, but I dont know nothing about that solution (simply...because I never needed it).
Molski

Dr Puttingham said:
Sorry but I have no more tolerance for people who just jump in first without doing a little research. A while back when the G4 first came out we didn't know. Now everyone who puts out a ROM warns people about the possible consequences. And there's so many threads on just the first page with tales of woe... how can a person miss them all??
I'm sorry but my parents raised me to take responsibility for my own actions, as Baretta used to say" Don't do the crime if you can't do the time"
Similar to when a Cat 4 hurricane is coming at you and you don't leave after being warned.... then blaiming everyone but yourself...
And if anyone wants to rebute me on this, don't bother as I've neither the time nor the patience.
Bottom line is that flashing phones has the very real possiblity of trashing an expensive piece of hardware in a very short period of time. If one has any doubts, then they shouldn't do it! And if a person doesn't have a concern initially then they're asking for trouble.
Sorry....
Click to expand...
Click to collapse
I knew I have a G4 and can't upgrade/downgrade with G3 roms or even change IPL/SPL, but I did that :]
Just found ROM v2.22.1 (I think), like my original Wizard's was. I was so happy that I found it, that I forgot about G3 chips existence 8)
Well, ROM was for G3 -_-
Just ran too fast and slipped. Maybe I got that speed after very often Pioneer BCT 1430 flashing. It is just immortal :]

well i know about the G3 and G4 but the rom that i downloaded from doesn't say anything about support G3 or G4 thats why i consider this rom doesn't included IPL and SPL just like the custom rom been make from other member.
Damn now i have to send my phone back to factory for fixing it. Lucky i still have a warranty of it.

nicholas99 said:
well i know about the G3 and G4 but the rom that i downloaded from doesn't say anything about support G3 or G4 thats why i consider this rom doesn't included IPL and SPL just like the custom rom been make from other member.
Damn now i have to send my phone back to factory for fixing it. Lucky i still have a warranty of it.
Click to expand...
Click to collapse
I do feel for you. I believe that the best thing that we can do is to not even make G3 ROM's available to the general public. Maybe all new ROM releases should be IPL/SPL - less. If one needs a ROM that will upgrade their bootloader they'll have to request a password protected file.
I just dunno...

Dr Puttingham said:
I do feel for you. I believe that the best thing that we can do is to not even make G3 ROM's available to the general public. Maybe all new ROM releases should be IPL/SPL - less. If one needs a ROM that will upgrade their bootloader they'll have to request a password protected file.
I just dunno...
Click to expand...
Click to collapse
...which is one of the reasons why carriers make it so hard to flash a ROM from one carrier to the device of another.

Qtek 9100 half bricked
Hi Molski
I'm new here.Just 'd like to know if you could support me on this matter.
Here we go...
I've flashed my 9100 from wwe to esn (spanish) with the ROM 1.3.7.5 or something like this.
This is the problem...I got a power failure in the middle of the flashing process.So now the device isnt able to start up it didnt install the OS properly.
Now it says:
IPL 2.24 (i managed to flash the ipl n spl)
SPL 2.24
OS 1.3.7.5
But I'm pretty sure that there's no OS watsoever because after keep trying flashing with other ROM in bootload mode.I finally managed with an Orange of 34 mb it updated the ROM,that is the IPL And SPL and with the process was running I've noticed the screen got blank and updated it properly.I was realy happy when I saw it but even though it did it properly I still got the same problem.The pda doesnt start up.When I flashed it for the first time I did it with care,followed all the instructions,that is, unlocked the CID first etc.But had the damn joy of getting a power failure in the middle of it.
I'm just wondering if one of you would be able to gimme a light on it.I've tried everything but flashing it with a G4 ROM coz I know it wont work.
Regards
Luiz Santos
Molski[/QUOTE]

spv m3000 stuck at 98% with rom

Great my wizzard is stuck
its on 98% then de blue/green bar on my phone turned red en stays that way it doesnt do anything anymore, after a while my computer says the installation is finished, (SOMETIMES i get an error that has something to do with memory on my computer. or it says usb connection got lost or something)
i can reboot my phone but its going straight in the boot menu with those collors, i can try the downgrade rom again but it keeps getting stuck at 98%
anywone some suggestions?
I tried to install the folowing: CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
becose i wanted to unlock my phone (dont know if its locked or not)
I tried a few other roms but they wont install at all
I forgot some info:
ipl/spl 2.18 so i have/ (HAD) a G3
gsm 01.04.10
os 2.18.1.3
it is an orange m3000 (i have a t-mobile simcard)
im using my sim in another phone do i need the simcard in the m3000 ?
well a few minutes later:
i put my simcard in my phone, but it still hangs
i tried in now on 2 computers but both are stuck at 98%
on my second pc i get the message ERROR [302] : UPDATE ERROR
The ROM update Utility has encountered communication errors during the update process. The program will guide you stem-by-step to recover from te errors so you can continue with the update.
2 choices to click: View Document or Recovery
lol i did the Recovery it made me put out the battery and reboot the phone en replug the cables
well ill try again then... :|
did it about 8 times now, keep getting stuck at 98% notice that the bar becomes red at 98%
anywone please any suggestions? im afraid i bricked my phone

There are 24 people who look at this topic and nowone has a clue what i need to do???

kaasaanfiets said:
I tried to install the folowing: CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
becose i wanted to unlock my phone (dont know if its locked or not)
I tried a few other roms but they wont install at all
I forgot some info:
ipl/spl 2.18 so i have/ (HAD) a G3
gsm 01.04.10
os 2.18.1.3
it is an orange m3000 (i have a t-mobile simcard)
im using my sim in another phone do i need the simcard in the m3000 ?
Click to expand...
Click to collapse
is a 1.04.10 radio a valid radio for a 2.xx rom?
If you are stuck, the only/best way to recover is to flash an official rom from your carrier. You can get to the bootloader so you are NOT bricked. You are just flashing roms that have a CID that doesn't match your phones. Try the button rom or the wizard love rom that the unlocking stickies mention repeatedly.
Were your IPL/SPL 2.18 before you started?
Read the Wiki, Read the stickies. For every person that says the process doesn't work there are 100 that it works flawlessly for and 99% of the time those that can't get it to work don't follow all the steps in order or just outright skipped steps or substituted with what THEY thought was better. There is a reason for each and every step in the guides. IF you follow them properly you WILL NOT have any issues.
For the situation you are in now: STOP trying to flash custom roms, you MUST get your phone back to a usable state before you go down that path again. Use your carriers latest available rom to recover your device.
Also you are lucky to get an answer at all because your question is asked in almost every single new thread and every single ROM thread. The answers are already easily found if you take the time to look yourself.

thanks man, i tried the original orange rom and it worked.
RUU_Prodigy_2180103_21801103_OR_NL_DUT_Ship.exe
im so happy, thank you for all your helpful comments
2.18 before i flased is yes.
i wanted to copy a new rom to my device, but i thought it was cid locked.
so i followed step by step the guide from faria
http://forum.xda-developers.com/showthread.php?t=263116&highlight=stuck+at+98%
but i think the problem was that i did not have an aku2 or whatever that means.
Im sorry if im being rude, but you people do a wonderful job on those roms and step by step guide's but u forget that there are people that have no clue what aku2 means when i google is, it says a new rom from t-mobile with wm5 but it doenst say how somewone can check for themselfs if they have an aku2 rom...
Im verry sorry for those noob questions but it look like a heva the same rom that i had before i messed it all up.
so can i install a new rom from here? like one of these?
Pro Black 3[1].0.1.exe
CB-AIRAF.exe
?

kaasaanfiets said:
thanks man, i tried the original orange rom and it worked.
RUU_Prodigy_2180103_21801103_OR_NL_DUT_Ship.exe
im so happy, thank you for all your helpful comments
2.18 before i flased is yes.
i wanted to copy a new rom to my device, but i thought it was cid locked.
so i followed step by step the guide from faria
http://forum.xda-developers.com/showthread.php?t=263116&highlight=stuck+at+98%
but i think the problem was that i did not have an aku2 or whatever that means.
Im sorry if im being rude, but you people do a wonderful job on those roms and step by step guide's but u forget that there are people that have no clue what aku2 means when i google is, it says a new rom from t-mobile with wm5 but it doenst say how somewone can check for themselfs if they have an aku2 rom...
Im verry sorry for those noob questions but it look like a heva the same rom that i had before i messed it all up.
so can i install a new rom from here? like one of these?
Pro Black 3[1].0.1.exe
CB-AIRAF.exe
?
Click to expand...
Click to collapse
You will not be able to install a CUSTOM rom until you CID unlock. I don't believe the Black 3.0 rom is available for the Wizard. It is a Hermes rom. There are several WM 6 roms available for the wizard, you should probably look in the WM6 sub-thread once you get yourself completely CID unlocked.
The tutorial tells you everything you need to know, even if you don't know anything about anything. Just read the instructions follow the links to download the roms/tools that it is talking about. If you don't understand the instructions you can post in that thread and the authors or others will help you there. Though they most likely will not respond until you show that you have read and at least have an idea of what you are trying to do, where you started where you are and where you would like to end up. If you don't understand the instructions there is always the IMEI unlockers site that will give you a utility to do it if you want to pay them for it.
Why are you trying to upgrade? Do you need to upgrade? Are you willing to void your warranty on your phone? Can you live without it if something drastic happens and you truly do brick your device, in most cases you will not be able to exchange your phone under warranty? If you haven't defined the first question or answered no to any or all of the other questions you shouldn't be rom flashing, especially not with unapproved roms that aren't supported by your carrier. You need to measure the potential gains against the risk of doing these things to determine if it is right for you. Once you get unlocked and flash a couple of roms you will see that it is easy and relatively safe as long as you read and follow the instructions they are tried and true and do work if they are followed properly.
I would suggest using this thread to unlock your device: http://forum.xda-developers.com/showthread.php?t=285435

Zzan said:
You will not be able to install a CUSTOM rom until you CID unlock. I don't believe the Black 3.0 rom is available for the Wizard. It is a Hermes rom. There are several WM 6 roms available for the wizard, you should probably look in the WM6 sub-thread once you get yourself completely CID unlocked.
The tutorial tells you everything you need to know, even if you don't know anything about anything. Just read the instructions follow the links to download the roms/tools that it is talking about. If you don't understand the instructions you can post in that thread and the authors or others will help you there. Though they most likely will not respond until you show that you have read and at least have an idea of what you are trying to do, where you started where you are and where you would like to end up. If you don't understand the instructions there is always the IMEI unlockers site that will give you a utility to do it if you want to pay them for it.
Why are you trying to upgrade? Do you need to upgrade? Are you willing to void your warranty on your phone? Can you live without it if something drastic happens and you truly do brick your device, in most cases you will not be able to exchange your phone under warranty? If you haven't defined the first question or answered no to any or all of the other questions you shouldn't be rom flashing, especially not with unapproved roms that aren't supported by your carrier. You need to measure the potential gains against the risk of doing these things to determine if it is right for you. Once you get unlocked and flash a couple of roms you will see that it is easy and relatively safe as long as you read and follow the instructions they are tried and true and do work if they are followed properly.
I would suggest using this thread to unlock your device: http://forum.xda-developers.com/showthread.php?t=285435
Click to expand...
Click to collapse
I bought my phone second hand (i dont have a receet of something) so i dont have any warranty anymore
i like my phone but i have troubles with sms the recever keeps getting old of no messages so that why a want another rom
i would be a shame if i brick it, but im willing to try
im doing the steps from your link now, ik istalling te rom at the second point but it still is stuck on 98% :|
is there another 1.5 rom? that i can try? i read someting about the love rom

kaasaanfiets said:
I bought my phone second hand (i dont have a receet of something) so i dont have any warranty anymore
i like my phone but i have troubles with sms the recever keeps getting old of no messages so that why a want another rom
i would be a shame if i brick it, but im willing to try
im doing the steps from your link now, ik istalling te rom at the second point but it still is stuck on 98% :|
is there another 1.5 rom? that i can try? i read someting about the love rom
Click to expand...
Click to collapse
The Wizard Love rom is another that people use when the Button rom doesn't work for them. I don't have a link to it but I am sure it is linked in the Upgrading or G4 sub-forums. Maybe even in the Wiki. Sorry haven't been spending much time in the Wizard forums as I only flash my wizard when something breaks, or a new feature is added -- My wife uses that phone now .
There is always the pay to unlock website but you should be able to get it unlocked with either button or the wizard love rom.
Just out of curiosity how long do leave it sitting at 98% before you determine that it is stuck? All roms "stick" at a few points during the flashing process. If you didn't wait at least 5 minutes or get an error on your PC you probably didn't wait long enough. Best advice I have on this is disable all power management/screen savers on your PC set up the flash. Once it starts leave the room and close the door for no less than 30 minutes. This way you can be sure that you didn't interrupt it. For a Wizard the flash should complete in 10 minutes or less. For the Hermes it can take a full 30 minutes depending on your flashing method an which components you are flashing. It is normal to hang for a few minutes at different points during the flash process, just because there is no transfer doesn't mean something isn't being decompressed/written on the device from what has already been transferred over.

Zzan said:
The Wizard Love rom is another that people use when the Button rom doesn't work for them. I don't have a link to it but I am sure it is linked in the Upgrading or G4 sub-forums. Maybe even in the Wiki. Sorry haven't been spending much time in the Wizard forums as I only flash my wizard when something breaks, or a new feature is added -- My wife uses that phone now .
There is always the pay to unlock website but you should be able to get it unlocked with either button or the wizard love rom.
Just out of curiosity how long do leave it sitting at 98% before you determine that it is stuck? All roms "stick" at a few points during the flashing process. If you didn't wait at least 5 minutes or get an error on your PC you probably didn't wait long enough. Best advice I have on this is disable all power management/screen savers on your PC set up the flash. Once it starts leave the room and close the door for no less than 30 minutes. This way you can be sure that you didn't interrupt it. For a Wizard the flash should complete in 10 minutes or less. For the Hermes it can take a full 30 minutes depending on your flashing method an which components you are flashing. It is normal to hang for a few minutes at different points during the flash process, just because there is no transfer doesn't mean something isn't being decompressed/written on the device from what has already been transferred over.
Click to expand...
Click to collapse
Yes well i waited the first time for like 15 minutes then my computer shut down the update programm
today i waited like 30 minutes cos i even had dinner.
Well ill try the love rom some other time cos i need my phone to work sunday becose i need tomtom
thank you for your information i appreciate it verry much
i noticed that the original rom that does work: RUU_Prodigy_2180103_21801103_OR_NL_DUT_Ship.exe that one, also flashes red and green while installing so i guess thats normal...

Scared to post but I am stuck must take your wrath

Aloha everyone,
I have tried to not post for about 3 weeks but I just can't move forward. I have read and tried to follow everything on the site but I am just confused. I know this is a developers site and I am very intimiated to be castigated by you guys but...it's the internet so what the hell.
I have found numberous instruction threads pertaining to updating ROMS on the Wizard. It seems that up until recently there was only one way to do things but now there are many. As I try to answer questions I come into conflict over which way I shoudl be heading.
I currently have a working WIZ100 that boots with IPL 2.21.0001 SPL 2.21.0lip with GSM 2.25.11 and OS 2.25.11.1. I somehow got to this point, I think by following the instructions to get hardSPL on my device and booting on startup. I did not know if I next needed to find a ROM and if so then how to get that ROM activated on my device or what programs to do this with. I know that the threads spell it out but the threads pertain only to direct assumptions; the assumption that my head is not in my ass.
I wanted to attempt to put a new rom on here, for fun and to play around with something new. Perhaps increase reliability or to get WM6 going. I am stuck now though. Part of me wants to turn back and load the original ROM from the HTC site and the other part of me wants to try a new ROM as I already have this thing booting to the 0lip SPL.
Is anyone out there willing to help me either via this thread, personal message or IM?

Since you have already installed Hard SPL you should be safe to go ahead and pick virtually any ROM you choose on there. I don't have a lot of experience with Hard SPL yet, except for installing it on my kaiser, but the one thing I would guess that you should make sure that the ROM you want to flash doesn't have would be an IPL/SPL update included. As far as I know, I don't think any of the public ones that you find on here have them but make sure you read the chef of the ROM's entire post to make sure. And, if you magically happen to find my ROM somewhere, which you shouldn't since I only gave it to 2 people to try, don't flash it because mine does include an IPL/SPL update.

From my best understanding you have already loaded HardSPL and now are CID unlocked. If this is the case then I would recommend going forward and flashing a new rom to your device. Just go to the Wizard Mobile 6 thread and find one you like, and flash it.
Simple as that.

I appreciate your replies.
1) I am clarified like butter! What program do I download and use to flash the ROM to the Wiz, this has been a source of confusion for me.
2) If I download and install the HTC Cingular ROM from HTC, will that overwrite the HardSPL and return my phone to Factory Default, including the radio areas? In other words do I rid myself of 2.21.0lip?
Thanks for not beating my head in...very polite you devs are...

I like beating people's heads in, and you are far too polite, that I am actually having a very slight guilty twinge! Damn you. I have a G3 myself so I cannot help much, however, I found this sticky which may help.
http://forum.xda-developers.com/showthread.php?t=332320
I do know that once you choose your rom, you open the folder and run the item marked as ruu.
Now if you only had a G3, then I could fry you like the noob you are.
I suppose at some point, I should make a point of reading/learning about G4's. I know they are a far different animal from my G3.

That's the reason I said not to flash a ROM that contained an IPL/SPL upgrade since there is the possibility that it may overwrite Hard SPL, although I'm not positive of that, but better safe than sorry especially if it it's not an official ROM that carries the correct IPL/SPL format for a G4. If it doesn't contain the correct format for a G4 it could ruin your phone. If you flash an official ROM though and it overwrites it you can always just reinstall Hard SPL again and keep flashing. I hope this makes sense.
As for the files you need to flash a new ROM, they're usually included with the ROM. If they're not then just let me know and I'll upload them for you.

Good that you asked before damaging your (expensive) device...
Every Flash version comes with a RUU (Rom Update Utility) you just run that proggy and it does the rest.
To make it easier, look for a rom that states it's G4 safe (no IPL/SPL included), so you don't have to mess around with the inner files. If you want to, begin your tests with the TNT series, the latest build, stated in my sig is G4 safe, after that you'll be able to know the initial procedure.
Good Luck.

Thanks for the info.
Do I execute the ruu from Windows XP or from the SD card ont he device?
Why am I have a hard time searching for and finding TNT 5.2.1921 TouchFlo ROM?

The rom update utlity gives me an error when I try to update. Should I try to do all this from the sd card?

Well, I am plugging along. I rebooted after an error 300 came up on the rom utility. Any suggestions for me?

I found this thread, back in business, thanks for your help guys.
I guess my only unanswered question is...if I use the HTC ATT exe from htc.com will it kill the hardSPL and restore the computer back to normal?

If you have ROM on your desktop, Connect your phone to your computer via USB, open up Activesync, uncheck the check box in settings that allows USB connections. Make sure you have at least 50% battery, then put your phone into bootloader mode. (soft reset while holding down the camera button- keep holding the button for 5 sec.) a tri-color RGB screen should come up. This is boot loader mode. Then run the rom update utility program, and everything is automatic from there on. once it is done flashing the phone will restart itself.

Thresher said:
I found this thread, back in business, thanks for your help guys.
I guess my only unanswered question is...if I use the HTC ATT exe from htc.com will it kill the hardSPL and restore the computer back to normal?
Click to expand...
Click to collapse
Try it and find out. I'd kind of like to know the answer to that one too, although my phones a G3 and already CID unlocked anyway. You can always reinstall Hard SPL over again if it does.

So this worked out well for me overall. Installing HardSPL to my G4, and then using a correct bootloader with the right ROM (to review).
I am having one issue.
I have the OEM ROM, however the RUU gives me an error. Is there a documented way to restore the phone to an original status? Is it even necessary?
I ask due to problems since my upgrade to the TNT rom. I am noticing a lot of missed calls and people have complained. Is this an issue with the 8125 and the particular ROM?
I don't know what to ask, or how to search for this. Thanks for any input you can offer.
Otherwise the TNT rom is awesome. I do miss the voice dialing though. Thats another search.

Actually, that's usually an issue with your radio version. Try using either version 2.19 or farias 2.69 and see if that fixes your problem. You should be able to find both of them in the wiki and you may want to try both of them and see which one gives you the better reception because sometime one will work much better than the other for you depending on your location.
By the way, you don't have to be CID unlocked or have hardspl installed to update your radio so you shouldn't have an issue with the RUU giving you an error. If you do, let me know and I'll upload a different RUU for you to try.

xeno1 said:
Actually, that's usually an issue with your radio version. Try using either version 2.19 or farias 2.69 and see if that fixes your problem. You should be able to find both of them in the wiki and you may want to try both of them and see which one gives you the better reception because sometime one will work much better than the other for you depending on your location.
By the way, you don't have to be CID unlocked or have hardspl installed to update your radio so you shouldn't have an issue with the RUU giving you an error. If you do, let me know and I'll upload a different RUU for you to try.
Click to expand...
Click to collapse
So the Rom is broken up into major parts. Those parts must ineract with one another, so that would be why my radio version may be at cause?

Yep. The ROM can contain the IPL, SPL, OS, Splash Screens, GSM (the radio), and extended ROM, any of which can be changed or upgraded individually without affecting the other parts of the ROM (for all intents and purposes anyway). That means you can change your radio version without it deleting all of your settings or your installed apps in your OS, etc etc.
Since you still upgrade each individual part using a RUU that is able to update any of the parts you still get a warning when you run it that it will delete all of your files, but as long as the update that you're running doesn't include a new OS you can ignore those warnings.

I decided to back out of the entire upgrade and move back to WM5 Official Cingular HTC ROM. I am stoked that I now know the full process of taking a G4 through hardSPL, ROM updates and restoral.
I was too scared to try any radio updates or fixes. Maybe when I upgrade phones I will come back to playing with the 8125 but for now, I just need a good functioning phone for work.
Do these Cingular radio fix cabs apply to a standard phone or only to upgraded ones?

bricked herald ??

hello could anyone help me ?
my device is stuck in bootloader and its recognized by the PC
this happened when i was trying a cooked rom
IPL 1.09.0001
SPL (ditto)
I searche everywhere an there seem to be only ways out for people with SPL 4.00.xxxx
is there a way out ??
thank you

sorry fr the bump but i really need help
I tried placing the phone in bootloader and installing the official HTC rom
but i get an ERROR 300
and the percentage is stuck at 0 on the screen

Try to flash your device with the Stock ROM.
That usually works

He already tried this, but it didnt work.
Let me just quote a post from dougstoner:
dougstoner said:
Well, yes and no. In the long run, it's better to Hard spl your phone. A lot of the roms in the forum require hard spl first. If you somehow fail during the hard spl, then you end up with a "brick". I used the uspl method first to flash, and it was a little easier to do, but hard spl'ing insn't complicated either. You just have to make sure of your ipl number is higher than 4. You can check this by holdign down the camera button, and press the soft reset button (use the stylus on the side to press) and continue to hold the camera button until you get to what's called the bootloader screen. It's red, blue, and green. Here are the instructions for hard spl, but MAKE SURE your ipl number is hight FIRST. If it isn't, you will brick your phone.
I case of people who don´t read 200 post and still brick their device - here is the guide that worked for ALL people with:
HTC P4350
XDA Terra
WING
with IPL 4.xxx and higher!!! (that is IMPORTANT)
and then follow this:
Default
For me it was working when:
1. install canonyang.cab
2. install aserpolicy.cab
3- install disablesecurity.cab
4. SOFTRESET
5. run RUU from Hard-SPLWM6 folder verison 4.70.yang
6. screen will become white - WAIT until it reboots itselfe.
7. done!
check if SPL now is 4.70.yang
Fore sure: I used this
http://rapidshare.de/files/38148213/...l_WM6.rar.html
mirror: http://www.sendspace.com/file/ot8zsn
It worked for many others, too.
Click to expand...
Click to collapse
So the IPL should at least be 4.xx but as you posted yours is 1.xx?! Might this be the issue?

Unfortunately, a SPL of 1.x after a hardspl/USPL means that the phone has been permanently bricked. Did you try to hardSPL your device or use USPL? They're both only compatible with 4.x SPL's.
I saw that someone recently came up with a way to fix bricked phones. They weren't Heralds, I forgot what they were... They basically found a way to use a buffer overrun on the SPL to launch code so they could launch a patched SPL and reflash... i wonder if our SPL's have that same bug and the method could be applied to us, too.

hey,
if my Herald is IPL 1.xxx can I somehow make it a 4.xxx? Or is there no chance to flash other roms? What does the IPL depend on? Production date?

thanks everyone for your patient replies
I guess for IPL 1.x there seems to be no solution as of now !!!
it was actually working initially with touch IT after Hard spl but i wanted to give a try to another version of touch it thats when the device got bricked .

I feel really sorry for you, but dont give up yet. As ivanmmj said, there could be a solution. Just check the forum.

I am not sure whether it helps but I did a little search and found severals threads:
Fix Bricked HTC ELF/ELFin
Someone with the same ERROR300 as yours
good luck

xtc.sanchez said:
I am not sure whether it helps but I did a little search and found severals threads:
Fix Bricked HTC ELF/ELFin
Someone with the same ERROR300 as yours
good luck
Click to expand...
Click to collapse
thanks so much mate !!! I will look into it right away

iv done all the reading
iv heard there was a way to flash the ROM through SD so i did try using
HERAIMG.nbh for the official rom from the HTC website !!
somehow the ROM does not work (invalid rom)
id try a couple of roms !!maybe ill be lucky !!
thanks again xtc.sanchez and everyone else
its been very informative and helpful

I Think I just Bricked my AT&T Tilt

Uhh......yea......I was trying to upgrade my Rom to Dutty's Diamond V1 Build 19588. I was using the instructions from Flash-Your-Tilt . I got to Step 4 CID-Unlock it installed 100% rebooted and then nothing. Now the phone will only play the intro with no sound, then go black. It shows in the lower right hand R 1.70.02iNex, G25.65.30, D1.62.00.00. The phone will allow me to do a hard reset but after it it goes through the intro with screen alignment and installs the extra apps, it reboots and then goes black. I did a ton of reading through the wiki's if someone could point me in the right direction or tell me if its toast, it would be much appreciated.
Thanks

Be strong. I think it's only bricked when you can't power it on.
I have a poor net connection and not time atm. So a suggestion if you haven't already, search the forum for the word bricked. I'm sure this has happened before..
There are several tricks that people know so you might be ok. good luck.

Calihoe said:
Uhh......yea......I was trying to upgrade my Rom to Dutty's Diamond V1 Build 19588. I was using the instructions from Flash-Your-Tilt . I got to Step 4 CID-Unlock it installed 100% rebooted and then nothing. Now the phone will only play the intro with no sound, then go black. It shows in the lower right hand R 1.70.02iNex, G25.65.30, D1.62.00.00. The phone will allow me to do a hard reset but after it it goes through the intro with screen alignment and installs the extra apps, it reboots and then goes black. I did a ton of reading through the wiki's if someone could point me in the right direction or tell me if its toast, it would be much appreciated.
Thanks
Click to expand...
Click to collapse
Flash an OEM Rom/Radio Combo. Also it wont hurt if you already CID unlocked to to go ahead and flash a new SPL to it. Should fix any and all issues as your phone is still actually booting and Not bricked

Installing windows the 6.1 ROM from HTC's site worked. Thank you very much for the great advice. If I wanted to now put Dutty's ROM on my phone can I go straight to that, or do I need to restart the whole ROM flashing process(installing Jump SPL, Hard SPL and CID) ?

If you have unlocked it, just put duttys onto the SD card and rename the .nbh to KAISIMG.nbh
Put the phone into bootloader and install Its the fastest most successful method. No worry about a data cable coming out mid flash ( happened once to me....not fun )
Shouldnt have to install hardspl again ( or use JumpSPL )
Just make sure that if you are installing a WM6.0 rom that you have a WM6.0 radio. If not, the flashing process for the radio is the same ( rename to KAISIMG.nbh )

Is there a way to see if I the hard SPL install and CID unlock worked ? Can I just restart the whole process regardless. Sorry for the noob questions.

Calihoe said:
Is there a way to see if I the hard SPL install and CID unlock worked ? Can I just restart the whole process regardless. Sorry for the noob questions.
Click to expand...
Click to collapse
Go into bootloader. If your screen says hardspl somewhere near the top then you're good to go. Check which version because you can have radio problems if you use a WM6.0 spl with a WM6.1 rom. Most recent roms are WM6.1 so try HardSPL 3.29 or higher.
If you don't have hardspl, get it here for wm6.0 roms or here for wm6.1 roms.

many thanks, your advice with the links were invaluable. I read and read and read, but i guess i did not read enough. This site rocks.