Aloha everyone,
I have tried to not post for about 3 weeks but I just can't move forward. I have read and tried to follow everything on the site but I am just confused. I know this is a developers site and I am very intimiated to be castigated by you guys but...it's the internet so what the hell.
I have found numberous instruction threads pertaining to updating ROMS on the Wizard. It seems that up until recently there was only one way to do things but now there are many. As I try to answer questions I come into conflict over which way I shoudl be heading.
I currently have a working WIZ100 that boots with IPL 2.21.0001 SPL 2.21.0lip with GSM 2.25.11 and OS 2.25.11.1. I somehow got to this point, I think by following the instructions to get hardSPL on my device and booting on startup. I did not know if I next needed to find a ROM and if so then how to get that ROM activated on my device or what programs to do this with. I know that the threads spell it out but the threads pertain only to direct assumptions; the assumption that my head is not in my ass.
I wanted to attempt to put a new rom on here, for fun and to play around with something new. Perhaps increase reliability or to get WM6 going. I am stuck now though. Part of me wants to turn back and load the original ROM from the HTC site and the other part of me wants to try a new ROM as I already have this thing booting to the 0lip SPL.
Is anyone out there willing to help me either via this thread, personal message or IM?
Since you have already installed Hard SPL you should be safe to go ahead and pick virtually any ROM you choose on there. I don't have a lot of experience with Hard SPL yet, except for installing it on my kaiser, but the one thing I would guess that you should make sure that the ROM you want to flash doesn't have would be an IPL/SPL update included. As far as I know, I don't think any of the public ones that you find on here have them but make sure you read the chef of the ROM's entire post to make sure. And, if you magically happen to find my ROM somewhere, which you shouldn't since I only gave it to 2 people to try, don't flash it because mine does include an IPL/SPL update.
From my best understanding you have already loaded HardSPL and now are CID unlocked. If this is the case then I would recommend going forward and flashing a new rom to your device. Just go to the Wizard Mobile 6 thread and find one you like, and flash it.
Simple as that.
I appreciate your replies.
1) I am clarified like butter! What program do I download and use to flash the ROM to the Wiz, this has been a source of confusion for me.
2) If I download and install the HTC Cingular ROM from HTC, will that overwrite the HardSPL and return my phone to Factory Default, including the radio areas? In other words do I rid myself of 2.21.0lip?
Thanks for not beating my head in...very polite you devs are...
I like beating people's heads in, and you are far too polite, that I am actually having a very slight guilty twinge! Damn you. I have a G3 myself so I cannot help much, however, I found this sticky which may help.
http://forum.xda-developers.com/showthread.php?t=332320
I do know that once you choose your rom, you open the folder and run the item marked as ruu.
Now if you only had a G3, then I could fry you like the noob you are.
I suppose at some point, I should make a point of reading/learning about G4's. I know they are a far different animal from my G3.
That's the reason I said not to flash a ROM that contained an IPL/SPL upgrade since there is the possibility that it may overwrite Hard SPL, although I'm not positive of that, but better safe than sorry especially if it it's not an official ROM that carries the correct IPL/SPL format for a G4. If it doesn't contain the correct format for a G4 it could ruin your phone. If you flash an official ROM though and it overwrites it you can always just reinstall Hard SPL again and keep flashing. I hope this makes sense.
As for the files you need to flash a new ROM, they're usually included with the ROM. If they're not then just let me know and I'll upload them for you.
Good that you asked before damaging your (expensive) device...
Every Flash version comes with a RUU (Rom Update Utility) you just run that proggy and it does the rest.
To make it easier, look for a rom that states it's G4 safe (no IPL/SPL included), so you don't have to mess around with the inner files. If you want to, begin your tests with the TNT series, the latest build, stated in my sig is G4 safe, after that you'll be able to know the initial procedure.
Good Luck.
Thanks for the info.
Do I execute the ruu from Windows XP or from the SD card ont he device?
Why am I have a hard time searching for and finding TNT 5.2.1921 TouchFlo ROM?
The rom update utlity gives me an error when I try to update. Should I try to do all this from the sd card?
Well, I am plugging along. I rebooted after an error 300 came up on the rom utility. Any suggestions for me?
I found this thread, back in business, thanks for your help guys.
I guess my only unanswered question is...if I use the HTC ATT exe from htc.com will it kill the hardSPL and restore the computer back to normal?
If you have ROM on your desktop, Connect your phone to your computer via USB, open up Activesync, uncheck the check box in settings that allows USB connections. Make sure you have at least 50% battery, then put your phone into bootloader mode. (soft reset while holding down the camera button- keep holding the button for 5 sec.) a tri-color RGB screen should come up. This is boot loader mode. Then run the rom update utility program, and everything is automatic from there on. once it is done flashing the phone will restart itself.
Thresher said:
I found this thread, back in business, thanks for your help guys.
I guess my only unanswered question is...if I use the HTC ATT exe from htc.com will it kill the hardSPL and restore the computer back to normal?
Click to expand...
Click to collapse
Try it and find out. I'd kind of like to know the answer to that one too, although my phones a G3 and already CID unlocked anyway. You can always reinstall Hard SPL over again if it does.
So this worked out well for me overall. Installing HardSPL to my G4, and then using a correct bootloader with the right ROM (to review).
I am having one issue.
I have the OEM ROM, however the RUU gives me an error. Is there a documented way to restore the phone to an original status? Is it even necessary?
I ask due to problems since my upgrade to the TNT rom. I am noticing a lot of missed calls and people have complained. Is this an issue with the 8125 and the particular ROM?
I don't know what to ask, or how to search for this. Thanks for any input you can offer.
Otherwise the TNT rom is awesome. I do miss the voice dialing though. Thats another search.
Actually, that's usually an issue with your radio version. Try using either version 2.19 or farias 2.69 and see if that fixes your problem. You should be able to find both of them in the wiki and you may want to try both of them and see which one gives you the better reception because sometime one will work much better than the other for you depending on your location.
By the way, you don't have to be CID unlocked or have hardspl installed to update your radio so you shouldn't have an issue with the RUU giving you an error. If you do, let me know and I'll upload a different RUU for you to try.
xeno1 said:
Actually, that's usually an issue with your radio version. Try using either version 2.19 or farias 2.69 and see if that fixes your problem. You should be able to find both of them in the wiki and you may want to try both of them and see which one gives you the better reception because sometime one will work much better than the other for you depending on your location.
By the way, you don't have to be CID unlocked or have hardspl installed to update your radio so you shouldn't have an issue with the RUU giving you an error. If you do, let me know and I'll upload a different RUU for you to try.
Click to expand...
Click to collapse
So the Rom is broken up into major parts. Those parts must ineract with one another, so that would be why my radio version may be at cause?
Yep. The ROM can contain the IPL, SPL, OS, Splash Screens, GSM (the radio), and extended ROM, any of which can be changed or upgraded individually without affecting the other parts of the ROM (for all intents and purposes anyway). That means you can change your radio version without it deleting all of your settings or your installed apps in your OS, etc etc.
Since you still upgrade each individual part using a RUU that is able to update any of the parts you still get a warning when you run it that it will delete all of your files, but as long as the update that you're running doesn't include a new OS you can ignore those warnings.
I decided to back out of the entire upgrade and move back to WM5 Official Cingular HTC ROM. I am stoked that I now know the full process of taking a G4 through hardSPL, ROM updates and restoral.
I was too scared to try any radio updates or fixes. Maybe when I upgrade phones I will come back to playing with the 8125 but for now, I just need a good functioning phone for work.
Do these Cingular radio fix cabs apply to a standard phone or only to upgraded ones?
Related
I recently attempted to update the ROM in my Cingular 8125. The process stopped at 95% and I received an "Internal Error". Now, when I turn on the phone, it gets as far as the color RUU screen, and nothing else.
How can I find out if I can repair this situation myself or if I need to take it back to Cingular.
Hopefully you'll give Cingular a little more info regarding this than you gave us.
My psychic advisor is STILL on vacation so I can be of very little help to you, sorry!
What ROM were you running before and what ROM were you trying to flash it with? Did you CID unlock before you flashed?
Sorry - When I posted the 1st message, I was in a hurry...
I am not sure what ROM version was on the device before I attempted to update (I know, I should have paid attention, but I was not). The phone was new from Cingular and I had not done anything else to it besides load a couple of apps (Skype & Agile).
I attempted to run the file RUU_Wizard_225111_22511102_022511_CWS_WWE_Ship.exe that I downloaded from the HTC site. The update go to 95% and I received the error "ERROR [326]: INVALID COMMAND" - This NBF file cannot be used for your PDA Phone. Please check your NBF file." (I have attached a screenshot of the error to this post).
I am not sure what to do at this point.
Thanks,
Chris
Some folks at the Cingular forum are having the same issue with no solution offered.
I'd suggest putting the device into bootloader mode (Holding Record and Camera buttons while soft reseting) and then reflashing. Make sure not to launch any programs while flashing. I also don't touch the device at all as I've noticed the USB connection might slightly disconnect.
Good luck and let us know what happens.
I just tried reloading from the bootloader screen - no luck. Exact same error at 95%. Would it work to try to reload an original earlier ROM? If so, how would I go about trying that?
Chris
I had this same problem.....I went to the cingular site after having the problem. Before installing I stopped all applications then soft reset.
THen after it boots up install the file from cingular. It worked from their site. Not sure what changed but I am not having any problems now with the new ROM.
I had this same problem.....I went to the cingular site after having the problem. Before installing I stopped all applications then soft reset.
THen after it boots up install the file from cingular. It worked from their site. Not sure what changed but I am not having any problems now with the new ROM.
I have re-downloaded the ROM file from the Cingular site (actually it just redirects to the HTC site). Same problem. I cannot get to the point to even shut down any programs because the phone OS does not even load at this point. When I do a soft reset, I get the following (sorry for the blurry image - as you can see my good phone with the good camera is dead...)
I had a similar problem. I posted the fix on another thread and ppl said i was wrong, this wasnt it...but heres what worked for me.
Are you using a usb port on the front of the computer? if so, try pluggin into the ports on the back of your computer. I tried flashing the official rom from cingular a few times using front port and it stopped at the exact same % each time. got the same thing as you, colored bars.
Someone had mentioned to me that front usb ports don't work as well as back ones. give it a try. good luck
from the picture, it looks you have the G4 chip(u can see 2.25 0001)
Thanks to everyone for their input. From the suggestions above, I have tried various USB ports on my laptop and I always get to the same point. I have also called HTC tech support and they are pretty sure I have bricked my phone. I talked to Cingular and they have agreed to replace it. I have also researched the G4 chip issues (looked at the post: http://forum.xda-developers.com/viewtopic.php?t=56408).
Now I have the following question - When I get my new phone (which I will assume will have the G4 chip as well), the Cingular rep told me that it will already have the latest 2.25.0001 ROM on it. What are my options at that point to SIM unlock my phone. Will I be able to? From the post I referenced above, it sounds like I may not be able to with the G4 chip.
Chris
xtreme23 said:
from the picture, it looks you have the G4 chip(u can see 2.25 0001)
Click to expand...
Click to collapse
I second this observation! :shock:
This makes a major difference on wether or not you can even upgrade.
Search for G4 issues.
The .0001 in the IPS/SPL number will tell you which one you have.
The way I understand it is:
2.25 - G3
2.25.0001 - G4
I think this is the proper way to identify it.
slapper said:
Now I have the following question - When I get my new phone (which I will assume will have the G4 chip as well), the Cingular rep told me that it will already have the latest 2.25.0001 ROM on it. What are my options at that point to SIM unlock my phone. Will I be able to? From the post I referenced above, it sounds like I may not be able to with the G4 chip.
Chris
Click to expand...
Click to collapse
Chris, LokiwizMSL ( http://forum.xda-developers.com/viewtopic.php?t=50768 ) can SIM Unlock your device. Be sure to read the instructions.
Well - Now I have a new problem. So far, Cingular is refusing to replace my phone - saying that the ROM upgrade voided the warantee. I am still fighting that, but just in case I loose, is there any way to get my phone fixed once it has been "bricked"?
slapper said:
Well - Now I have a new problem. So far, Cingular is refusing to replace my phone - saying that the ROM upgrade voided the warantee. I am still fighting that, but just in case I loose, is there any way to get my phone fixed once it has been "bricked"?
Click to expand...
Click to collapse
If you installed an unofficial ROM then they are correct. You should never admit that you used a ROM that was not provided by HTC.
There are warnings all over this site about VOIDing your warranty.
Since you used the Official Update they are wrong.
Same problem with official Cingular 8125 ROM
I tried to flash the official Cingular ROM from the HTC site here:
http://www.htcamerica.net/docs/RUU_Wizard_225111_22511102_022511_CWS_WWE_Ship.exe
I got the same error at 95%:
"Error [326]: INVALID COMMAND This NBF file cannot be used for your PDA Phone. Please check your NBF file."
When I reset the phone I get the RGB bootloader screen and nothing else.
My phone is a G4 and was running ROM version 2.25.11.1 WWE before. The reason I tried to apply this ROM is because there was apparently no Extended ROM. None of the customization cabs executed on a hard reset. Also, in Device Information, there was no "ExtROM" listed.
This is the second phone that this has happened on. I thought the first time was just a fluke thing and I had a bad phone. But now I think there is an issue with this ROM.
Anyone have any idea what is going on here with this ROM? Does the fact that there was no Extended ROM have anything to do with this ROM not flashing properly?
Is there anything else to try or do I need to try to return the phone (AGAIN)?
how to fix the problem
read this thread carefully. The upgrade problem seems to be occuring on G4 chipped Wizards with the most current IPL/SPL.
http://forum.xda-developers.com/viewtopic.php?t=56088
take the official update. run it, when it finishes extracting look for the extracted NBF file in your
C:\Documents and Settings\yourusernamehere\Local Settings\Temp\the newest directory just made
find the NK.NBF file
extract it using the tutorial in the post above you will be flashing with the official cingular components sans IPL/SPL.
flash it and your are back up and running
I would have posted this earlier but i had to make sure it worked and was repeatable.
I think the problem with the new update is the new IPL/SPL version checking. It seems that if the patcher sees the same version already running it will give you that error at 95%. I've seen it on 3 phones already and I have been able to fix them by doing what i've told you above. You are already in bootloader mode and your phone is ready to accept a new rom anyways. My solution may not be the best for your phone and take no responsibilites but you are already desperate and need a fix. Good Luck!
Thanks for the reply, evilito. Since I hadn't gotten any replies for a few days, I decided to go ahead and try to exchange the phone at the Cingular store. They were baffled that this was the second phone I had returned for the exact same problem, but gave me a new phone anyway. I wish now that I had waited so that I could try evilito's solution to see if it works. As it is now, I am too scared to try any flashing on this new phone after my results with the first two. I would really hate to have to try to return a third phone
Can anyone else verify that there is a problem with the latest Cingular ROM when flashing a G4? Or did I really have two bad phones?
slapper said:
Now I have the following question - When I get my new phone (which I will assume will have the G4 chip as well), the Cingular rep told me that it will already have the latest 2.25.0001 ROM on it. What are my options at that point to SIM unlock my phone. Will I be able to? From the post I referenced above, it sounds like I may not be able to with the G4 chip.
Chris
Click to expand...
Click to collapse
Thats good to know, I thought that when we unlocked it and updated the ROM we lost Warentee Support. Where can you get the official Cingular 2.25 ROM. I am still on 2.17.
Hi, After the soft reset comand, I removed the battery from my Wizard. After that the followin problem was appear: the phone is bringing up to the splash screen and STOP on this position.I have tried to download another Rom but the problem still is the same. My Phone is not CID unlock and before this, I cooked own rom like is writen here http://forum.xda-developers.com/showthread.php?t=271043 . So any idea how to wake-up my phone MDA Vario.
Ok forgive me if I'm wrong here, I don't really want to judge before I know the full story, but seems to me your brain went on strike momentarily. First rule of flashing any unofficial rom CID UNLOCK YOUR DEVICE. Anyways sorry, I just wanted to say something so it doesn't happen to you again, that said, what rom did you try to upgrade to? what rom did you try to downgrade to after that? is your device a G3 or G4?
If your device is a G3 I would recommend downgrading to this rom by xelecin
ftp://xda:[email protected]_RUU_Wizard_1081002_108_10910_ENG_US.exe
it will ask you if you want to CID unlock your device at the start so you shouldn't need to worry about forgetting this time , if you can't connect your device to activesync just go into the bootloader (hold the camera, voice dial buttons while pressing the reset button) and once it connects run the set-up.
Oh another thing before I forget..... do some searching and read up a bit, because this is a pretty common topic on this forum, best of luck and hope everything works out ok. If not, report back.
*edit* I just noticed the thread that you linked to, I actually wasn't aware that this was possible, but anyways I think it's still much safer to CID unlock your device if possible, and another thing you might try replying in that thread if it doesn't work out since they should be more knowledgeable in the matter..... and that would help keep the forums less cluttered *edit*
Thanks, for your help, Unfortunately you are totaly right for my stupid act (again). At first i tried to solve the problem alone , but whole day I roam through this forum to find solution but I can't find the same problem like my. Maybe because of my ..... brain .Anyway I am with G3. NOW I have
IPL 1.0
SPL 2.26
GSM 01.09.11
OS 1.5.4.2
This is after this procedure http://forum.xda-developers.com/showthread.php?t=263116
I tried also to download also and Molski's 2.26.10.2 AKU2.3 Rom a.k.a. 2.26.10.2 Final Edition Rom, but the problem is the same : The splash screen is running and STOP and.... nothing.
I can go to bootloader and can download new rom, but I can't start fhe phone.
Yeah I know these forums aren't the easiest in which to look for info. So you can go into the bootloader, that's good. Don't try to go to a AKU2.x rom or later, keep it under that, so no 2.26 roms at all. 105, or 108 roms should be good.
Did you try the rom from the link I provided or the one on the thread? and afterwards did it go into the phone at all? My friends MDA had a similar problem last week, caused by the same thing, though in your case I see the SPL isn't updating when you install new roms on his it was the os that wasn't updating, but as soon as I installed that rom I recommended it booted up fine, then I updated his device to molski's 2.3.
I'll check back in a few so let me know how's it going.
Here's what you need to know & if you follow these instructions your prob will be solved.
The Definitive Guide to Unlocking & Rom Upgrading G3 Wizards
http://forum.xda-developers.com/showthread.php?t=285435
Wish u best of luck.
DoCtOr_X said:
Here's what you need to know & if you follow these instructions your prob will be solved.
The Definitive Guide to Unlocking & Rom Upgrading G3 Wizards
http://forum.xda-developers.com/showthread.php?t=285435
Wish u best of luck.
Click to expand...
Click to collapse
Ok, but tell me how to solve this :
"qiote"
8. Open ActiveSync, Explore and copy enablerapi.cab from your PC's C:\ (remember that's where you extracted lokiwiz to...) to you device, I don't care where.
9. Pick up your PDA, File Explorer, find the enablerapi.cab and click it.
"quote"
I don't have access to the phone explorer and phone at all.
masr1979 I have tried the rom you give me, but it look like there is some things I don't understand: When I start the exe file i have choice <continue> .Whet I type <c> 2(two) time the soft tell me <no device found> and order me to continue with copy ???. After few seconds tell me that Unlocker ..... Done!, and start HTC wizard Unlocker and NOTHING !!! Stop on this position more then 15 min. and only the led for charging on the phone is active.
Forget all about unlocking. Until you can boot the device completely it'll never work.
Try and install an official 2.x ROM on your device.
My suspicion is that you originally has a G4 device, which is bad because if you DID have a G4 you have a brick now...
Can you remember your phones old ipl/spl? for your sake I hope it wasn't something in this format 2.XX.000X.
masr1979 said:
Can you remember your phones old ipl/spl? for your sake I hope it wasn't something in this format 2.XX.000X.
Click to expand...
Click to collapse
Of course I'm not sure, but I thing it was 2.21. Anyway did you think that is posible to cook my own rom in G4? I'm totally confused.
Every time when I upload new rom I have this:
http://forum.xda-developers.com/attachment.php?attachmentid=32884&stc=1&d=1168184491
IMG_2976.jpg
...and also this is my bootloader screen
http://forum.xda-developers.com/attachment.php?attachmentid=32885&stc=1&d=1168184491
IMG_2977.jpg
Dr Puttingham said:
Forget all about unlocking. Until you can boot the device completely it'll never work.
Try and install an official 2.x ROM on your device.
My suspicion is that you originally has a G4 device, which is bad because if you DID have a G4 you have a brick now...
Click to expand...
Click to collapse
Thanks, but I try to find oficial rom but without success. And very interesting thing I found.. when I start to upload new rom the soft start to check my old rom and after that tell me that i have GE (german) language, but my old was WWE ?
Is it posible some one to give me some link to official 2.x ROM but for T-mobile german language.
Well the other day I tried finding that german rom for a while.... that search was going nowhere, I saw this thread, I don't know if you might want to check into it and maybe try it out. There's mixed results apparently but who knows
http://forum.xda-developers.com/showthread.php?t=276963
can anyone explain which one is the best one for 8125 g4 locked
and how im am to go about it thanks alot sorry for the noob question
Just depends on your operator, so you need to try yourself and find out which is the best one.
i have at&t and running on wm 5
Basically, like starkwong said, it's pretty much trial and error. You have to try out all of the different Radio ROMs to find out which one works best for you in your area. Nobody here can really tell you for sure which one will work the best for you, unless maybe they live just down the street from you or something.
i know that im just asking is it safe and not brick my phone because its not unlocked in anyway
Normally Radio ROM can be updated directly with the Update Software (RUU) regardless unlock state of CID.
OH NO!
I have a Cingular 8125 G3 unlocked and have TNT's Touchflo rom on it. I tried updating my radio using Faria's 2.69.11 updater, but now my phone won't work, usb won't work, and when I reboot, it reads the IPL/SPL is still 1.xx and the OS is 6.00.0.0 but there is NO GSM line at all! Seeing how I can't the usb to work, I can't flash it with the T-Mobile rom or anything, however I can transfer things onto the phone via IR. So is there something out there I can use to fix at least the usb so I can reflash my phone. Thanks in advance!
Got it!
Nevermind, I got it working. I was able to transfer the bootloader.exe file over to my phone, ran it, and then was able to reflash my phone. Whew, I was so scared. Anyhow, thanks for all the info on this page, I love this site!
Hey there,
since I'm new to the community I hope I'm not doing it wrong
I will receive my new Herald within the next days and now I'm seeking for all the stuff I will need then.
1. Hard-Spl. I don't get it. What is it? Is it some kind of firmware update or whatever? The ROM's thread says that I would need SPL 4 or later to successfully finish the Update but I can't find that SPL application in version 4+ :/
2. http://forum.xda-developers.com/showthread.php?t=437385 - http://www.evolvers.net/Herald_Roms/Version 7.7/ => I'd like to use that ROM. But I'm not too sure whether to use Manilla2D or Omnia.
3. What if I needed to send my device back for warranty reasons. Is there some way to flash back the standard Win Mobile 5.0?
I hope I will get your attention!
Regards,
Chris
Hey there,
A friend of mine just told me about flashing ROMs literally a few days ago. I did my first successful flash just yesterday and I am very happy that I did. FYI, yes I am using a stock TMobile Wing from 2007.
Rom's are not interchangeable across different phone models as far as I know. So you need to get ROMs made for the wing a.k.a. the Herald. Any Rom for the Herald should work.
Just remember one thing that I forgot to do, make sure that you back up your data. I forgot to do this and lost all of my data. Luckily, I did not have any pictures or music that I was too sad to lose. However, I did lose my contacts. Again luckily, I had an old Sim card from last year that had my contacts on it, so I was able to get back 90% of my phonebook, except for a few people that changed numbers or new contacts. So be sure to save anything you want to keep somewhere else.
I am pretty technically savvy, but I must say that flashing the Rom did take me several hours. The process itself only takes about 10 minutes, but it took hours to figure out what type of Rom I needed and how to exactly flash it. You will see many people trying to tell you that you need to know your IPL and SPL version, and there is no way to know this until you start flashing! It wasn't until I did my first accidental flash that it showed me this information, and this ended up being my first successful flash. After trying for several hours the night before and not succeeding, I guess that's why it slipped my mind that flashing successfully would erase all my data.
The one that actually worked for me was the Canonyang Rom. In the link below please look at post number 216, and you will see a link to download the ROM that worked for me. The file is "HardSpl_WM6".
http://forum.xda-developers.com/showthread.php?t=332413&page=22
I tried to flash directly to open touch, and no matter what I tried it was not successful. When I accidentally tried this Canonyang flash it worked successfully the first time, and after that now I was able to flash to any other Rom.
I am currently running open touch light version 6.5 because I read in another thread that it's supposed to be the fastest. I don't need a lot of features so I'm happy with what it has, and it is much, much faster than the stock T-Mobile Rom.
Since you are now getting it, yes, warranty is an issue for you. I am very new to all this, but from what I gather, once you flash, it does void the warranty. Perhaps someone else can answer if there is a stock TMobile rom, that you can flash back to. However, since the roms are digitally signed, I'm not sure that by even doing that, if TMobile can tell you modded it, and therefore elect not to honor your warranty. I guess that's a risk you have to decide if it's worth it or not. IMHO, I found out about rom flashing this week, and my warranty was up last month. However, if I had found out about this during my warranty period, I would have still done it. The Tmobile stock rom is sooo slow, compared to these roms. If you've never used these roms, you'd think like hey, it's got some bugs, but it's not that bad. But if you've used them, you're never going back to stock rom again.
I apologize if there are any typos, as I am using voice to text recognition software that I am testing. I thought I'd help you out by writing this as well as I test it. Good luck and let us know if you have any questions, we're all here to help.
Hey,
thanks for all the information. Was very helpful. I decided to you the ROM from that link. Should work, shouldn't it?
The only thing I don't get is how to get to SPL4+ :/ I heared of different methods of SPLing. Like Hard SPL and USPL. Can you bring light into that cave?
Cheers.
Hey there,
Your link goes to the Open Touch thread. The link I'm referring to, is this one:
http://rapidshare.de/files/38148213/HardSpl_WM6.rar.html
As I said, I was NOT able to flash directly from stock to OTP. I tried many methods, and Canonyang was the only one that worked for me. After I successfully flashed to CY, then I was able to flash to OTP without issue. But in theory yes, any Herald rom's should work fine.
In regards to IPL/SPL, my wing is from September 2007, and I had IPL/SPL both above 4. I had NO WAY to verify this before flashing. When I initiated the flash for CY, and the wing rebooted, it was THEN I saw my IPL/SPL versions. I'm sure yours will be at least v4.
Actually as I write this to you, I remember a critical step I forgot to tell you. You need to Application Unlock your device as well. This is probably what I was missing in my failed attempts. After I did that, then the CY flash worked. I got that information, from this link:
http://forum.xda-developers.com/showthread.php?t=356295
So I would suggest following the steps there first, then trying the link earlier to flash to CY, then flash to anything else. This is the procedure that worked for me. Good luck!
Hey there and thanks again for that bunch of information
itbmd said:
I'm sure yours will be at least v4.
Click to expand...
Click to collapse
What does that mean then? I do not have to HardSPL my phone? But still, would you mind telling my step by step (And I really mean step by step^^) how to HardSPL a device? I really do not want to brick my phone directly at the beginning.
Oh and what should I rather be using, SoftSPL or HardSPL?
Cheers.
Hey there,
Sorry but I just flashed my device less than a week ago as I mentioned. I don't have many of the answers you ask, because I'm asking them myself. I don't know the diff between Hard vs. Soft SPL.
The file I linked you to earlier, is a hardspl, as denoted by its filename "HardSpl_WM6". It hardspl flashes to the canonyang rom. It was then I saw the IPL/SPL versions, and then was able to flash to other roms.
FYI, I was concerned about bricking my device as well. But during the roughly 5 hours I was trying to flash it correctly, every time the flash failed, it did NOT brick. It just errored on the pc, and the Wing itself just restarted and went back to the stock TMobile rom. It never actually bricked. Make sure you do the application unlock though; I think that's a step that people may not do and could cause it to brick. Good luck.
Hello everyone and sorry for starting a new thread with so many threads already about installing custom ROMs. So sorry again....
First of all I want to say that I have installed Saturday my first custom ROM.
1. I installed HardSPL
2. I installed ROM (I got an error first time because my usb got diconnected - tricolour boot screen and an error code - could not see it; second time everything worked fine and I have now a new great looking ROM
3. I did not installed Radio.
1st question: Do I have to install Radio everytime I install a new ROM or is it ok if I keep my old Radio? - the phone works just fine.
Second question: Do I have to HardSPL everytime I install a new ROM?
Please be kind and reply to my questions even if it must have been already posted in some thread.
rarely can i answer a question but yours are easy LOL
You don't need to do your radio because the radio you have is untouched by roms.
Likewise if you do a radio it wont change your rom.
Radio's probably will not make much diffrence.
Once you have Hard spl it is done.
You can then flash as many roms as you want , but Hard Spl is just once
No and No.
Thank you guys.
The radio is stored on a different part of the memory then the ROM, so it doesn't get replaced when you flash a ROM (unless the ROM specifically includes it, like the new "official leaked" ATT ROM). And custom ROMs will never include the radio, that I know of.
A newer radio version MAY get you better battery life or GPS reception. But it can be very specific to your geographic location. It your choice whether to update your radio or not, its certainly not required. If you want, you are free to experiment, as you can always go back to the old radio if the new one doesn't work out. The process for flashing a new radio is essentially the same as flashing a ROM, except the actual process if done very fast.
As already mentioned, you only need to HardSPL once. The only way phone will become SPL locked back to factory condition is if you specifically do so using the provided relocker program on the SPL thread (for instance, to return the phone for warranty repair).