Related
Aloha everyone,
I have tried to not post for about 3 weeks but I just can't move forward. I have read and tried to follow everything on the site but I am just confused. I know this is a developers site and I am very intimiated to be castigated by you guys but...it's the internet so what the hell.
I have found numberous instruction threads pertaining to updating ROMS on the Wizard. It seems that up until recently there was only one way to do things but now there are many. As I try to answer questions I come into conflict over which way I shoudl be heading.
I currently have a working WIZ100 that boots with IPL 2.21.0001 SPL 2.21.0lip with GSM 2.25.11 and OS 2.25.11.1. I somehow got to this point, I think by following the instructions to get hardSPL on my device and booting on startup. I did not know if I next needed to find a ROM and if so then how to get that ROM activated on my device or what programs to do this with. I know that the threads spell it out but the threads pertain only to direct assumptions; the assumption that my head is not in my ass.
I wanted to attempt to put a new rom on here, for fun and to play around with something new. Perhaps increase reliability or to get WM6 going. I am stuck now though. Part of me wants to turn back and load the original ROM from the HTC site and the other part of me wants to try a new ROM as I already have this thing booting to the 0lip SPL.
Is anyone out there willing to help me either via this thread, personal message or IM?
Since you have already installed Hard SPL you should be safe to go ahead and pick virtually any ROM you choose on there. I don't have a lot of experience with Hard SPL yet, except for installing it on my kaiser, but the one thing I would guess that you should make sure that the ROM you want to flash doesn't have would be an IPL/SPL update included. As far as I know, I don't think any of the public ones that you find on here have them but make sure you read the chef of the ROM's entire post to make sure. And, if you magically happen to find my ROM somewhere, which you shouldn't since I only gave it to 2 people to try, don't flash it because mine does include an IPL/SPL update.
From my best understanding you have already loaded HardSPL and now are CID unlocked. If this is the case then I would recommend going forward and flashing a new rom to your device. Just go to the Wizard Mobile 6 thread and find one you like, and flash it.
Simple as that.
I appreciate your replies.
1) I am clarified like butter! What program do I download and use to flash the ROM to the Wiz, this has been a source of confusion for me.
2) If I download and install the HTC Cingular ROM from HTC, will that overwrite the HardSPL and return my phone to Factory Default, including the radio areas? In other words do I rid myself of 2.21.0lip?
Thanks for not beating my head in...very polite you devs are...
I like beating people's heads in, and you are far too polite, that I am actually having a very slight guilty twinge! Damn you. I have a G3 myself so I cannot help much, however, I found this sticky which may help.
http://forum.xda-developers.com/showthread.php?t=332320
I do know that once you choose your rom, you open the folder and run the item marked as ruu.
Now if you only had a G3, then I could fry you like the noob you are.
I suppose at some point, I should make a point of reading/learning about G4's. I know they are a far different animal from my G3.
That's the reason I said not to flash a ROM that contained an IPL/SPL upgrade since there is the possibility that it may overwrite Hard SPL, although I'm not positive of that, but better safe than sorry especially if it it's not an official ROM that carries the correct IPL/SPL format for a G4. If it doesn't contain the correct format for a G4 it could ruin your phone. If you flash an official ROM though and it overwrites it you can always just reinstall Hard SPL again and keep flashing. I hope this makes sense.
As for the files you need to flash a new ROM, they're usually included with the ROM. If they're not then just let me know and I'll upload them for you.
Good that you asked before damaging your (expensive) device...
Every Flash version comes with a RUU (Rom Update Utility) you just run that proggy and it does the rest.
To make it easier, look for a rom that states it's G4 safe (no IPL/SPL included), so you don't have to mess around with the inner files. If you want to, begin your tests with the TNT series, the latest build, stated in my sig is G4 safe, after that you'll be able to know the initial procedure.
Good Luck.
Thanks for the info.
Do I execute the ruu from Windows XP or from the SD card ont he device?
Why am I have a hard time searching for and finding TNT 5.2.1921 TouchFlo ROM?
The rom update utlity gives me an error when I try to update. Should I try to do all this from the sd card?
Well, I am plugging along. I rebooted after an error 300 came up on the rom utility. Any suggestions for me?
I found this thread, back in business, thanks for your help guys.
I guess my only unanswered question is...if I use the HTC ATT exe from htc.com will it kill the hardSPL and restore the computer back to normal?
If you have ROM on your desktop, Connect your phone to your computer via USB, open up Activesync, uncheck the check box in settings that allows USB connections. Make sure you have at least 50% battery, then put your phone into bootloader mode. (soft reset while holding down the camera button- keep holding the button for 5 sec.) a tri-color RGB screen should come up. This is boot loader mode. Then run the rom update utility program, and everything is automatic from there on. once it is done flashing the phone will restart itself.
Thresher said:
I found this thread, back in business, thanks for your help guys.
I guess my only unanswered question is...if I use the HTC ATT exe from htc.com will it kill the hardSPL and restore the computer back to normal?
Click to expand...
Click to collapse
Try it and find out. I'd kind of like to know the answer to that one too, although my phones a G3 and already CID unlocked anyway. You can always reinstall Hard SPL over again if it does.
So this worked out well for me overall. Installing HardSPL to my G4, and then using a correct bootloader with the right ROM (to review).
I am having one issue.
I have the OEM ROM, however the RUU gives me an error. Is there a documented way to restore the phone to an original status? Is it even necessary?
I ask due to problems since my upgrade to the TNT rom. I am noticing a lot of missed calls and people have complained. Is this an issue with the 8125 and the particular ROM?
I don't know what to ask, or how to search for this. Thanks for any input you can offer.
Otherwise the TNT rom is awesome. I do miss the voice dialing though. Thats another search.
Actually, that's usually an issue with your radio version. Try using either version 2.19 or farias 2.69 and see if that fixes your problem. You should be able to find both of them in the wiki and you may want to try both of them and see which one gives you the better reception because sometime one will work much better than the other for you depending on your location.
By the way, you don't have to be CID unlocked or have hardspl installed to update your radio so you shouldn't have an issue with the RUU giving you an error. If you do, let me know and I'll upload a different RUU for you to try.
xeno1 said:
Actually, that's usually an issue with your radio version. Try using either version 2.19 or farias 2.69 and see if that fixes your problem. You should be able to find both of them in the wiki and you may want to try both of them and see which one gives you the better reception because sometime one will work much better than the other for you depending on your location.
By the way, you don't have to be CID unlocked or have hardspl installed to update your radio so you shouldn't have an issue with the RUU giving you an error. If you do, let me know and I'll upload a different RUU for you to try.
Click to expand...
Click to collapse
So the Rom is broken up into major parts. Those parts must ineract with one another, so that would be why my radio version may be at cause?
Yep. The ROM can contain the IPL, SPL, OS, Splash Screens, GSM (the radio), and extended ROM, any of which can be changed or upgraded individually without affecting the other parts of the ROM (for all intents and purposes anyway). That means you can change your radio version without it deleting all of your settings or your installed apps in your OS, etc etc.
Since you still upgrade each individual part using a RUU that is able to update any of the parts you still get a warning when you run it that it will delete all of your files, but as long as the update that you're running doesn't include a new OS you can ignore those warnings.
I decided to back out of the entire upgrade and move back to WM5 Official Cingular HTC ROM. I am stoked that I now know the full process of taking a G4 through hardSPL, ROM updates and restoral.
I was too scared to try any radio updates or fixes. Maybe when I upgrade phones I will come back to playing with the 8125 but for now, I just need a good functioning phone for work.
Do these Cingular radio fix cabs apply to a standard phone or only to upgraded ones?
Hi,
I'm trying to upgrade my radio rom. At first everything seems fine but after the upgrade process is at about 30%, I get error no. 114. I think that maybe a part of my rom is broken, so I'd like to change the allocation of my roms. I'd like to have the extented rom part as new radio rom and vice versa.
Is that possible? If yes, how is it done?
thx for your help
PECK
sorry to disappoint you, but no, that is not possible.
start the other way around, do not try to bypass a problem by creating a new one, try solving the problem first. why would the radio rom abort in the middle of the upgrade process?
- do you use the right upgrade tools?
- do you use the right radio rom?
- did you take care of everything else there is about upgrading a rom (bootloader, active sync kill...)?
- are you able to flash another os rom?
...whatever comes to mind when flashing roms, because this problem will not be any different after all.
@ chef_tony:
I've no problem with upgrading the OS or the extented rom! thats why i think that maybe the flash chip is broken!
I tried many different upgrading tools, even one of yours!
I don't know the current language id of my device! Originally it was a german XDA III! How can I check the current language id and how can I change it? is it possible that I have this problem because of a wrong language id?
thx in advance
PECK
i would guess it couldn't have anything to do with the country id, error 114 is radio rom update error.
btw, you get to see the inofficial country id everytime you soft reset the device, and in the bottom right corner it says something like WWE, or GER, for instance. or, when you connect the device and run getdevicedata.exe from the ruu folder, which is done before the upgrade, to show you the "from:" and "to:" numbers.
but: i just got another idea.
do you actually take out the sim card, before trying to upgrade the radio?
is your device sim unlocked?
have you played around with different bluetooth stacks?
have you performed a hard reset before trying to upgrade the radio?
have you tried upgrading the radio from the stock o2 rom wm2003?
ok, that was more than one idea, and downgrading seems like a lot of work, but it is worth a shot. if you spend days flashing (or trying to) over and over again anyways, you might as well try that, would mean 2 extra upgrading sessions, but what is that, like an hour?
oh, and what radio rom does the device have now, stock? or is it a newer one already?
and why do you think you need to upgrade the radio rom anyways? phone not working, maybe the problems lie deeper and that could be why the upgrade process can't work in the first place!
"don't confuse an original symptom with the sickness from the drugs we gave him" as dr. house, would say
hi,
the device is unlocked! there was no sim card inserted during the upgrade; i just tryed with one but I get the same error at 32% progress...
it doesn't work with the original rom, also!
it would be fine if the stock rom was installed, but unfortunately i don't have installed any radio rom whatsoever!
windows mobile device information says that i don't have a radio rom and no protocol installed!
oh, for pete's sake, i'm sorry.
when i asked you about the sim card being inserted, i thought of taking the card out, if you hadn't done before, should have written that. many people have problems when having a sim card or sd card inserted, i didn't want to suggest to put one in! that can never do good, either nothing happens or it gets worse, i really shouldn't have forgotten that.
it doesn't work with the original rom, also!
Click to expand...
Click to collapse
yeah, but does the stock rom itself work? i mean, the stock rom is a so called baked rom, meaning it contains a rom, an extrom and a radio rom, while the cooked roms here only contain the actual rom, so the os. i mean, you could try and extract the radio from the stock rom and try and flash that. it would give you a radio back! or if that doesn't work either, try flashing the entire stock rom, if that works without problems and then you'd have a radio, it means that your issue is too strange to think about, but still you can delete the extrom again and flash another rom without harming the original radio.
wouldn't that be a step forward?
btw. what radio rom are you trying to flash?
if it is just one, you try over and over, are you absolutely certain, this is for the BA? which version is it? what was the original file name of the exe? where did you get it? have you tried re-downloading it, maybe the file is really broken!
hi,
i tryed many different rom versions, and i'm pretty sure they are for the blueangel!
do you know, where i can get a cooked rom for my xda 3?
first, to be clear about that, as mentioned before, cooked roms consist only of the operating system itself and contain neither a radio rom nor an extrom. so about every rom offered here is a cooked rom. but that won't solve your problem, since, as mentioned, there is no radio included. that is why i suggested for you to try the original radio from the shipped rom, and then the entire shipped rom, to determine, whether the radio rom flashes, when it comes after an nk.nbf rom, which would mean, that from now on, you'd have to "bake" roms yourself, by taking cooked roms and adding the radio, so to not lose it. when you can actually flash wm2003 you can also try flashing other radios with the original BAupgradeut, because in contrast to os roms, there should be no limitations to the radio roms, as far as i know.
Change WM german to english or spanish
Hi! I´m new in the forum, please i need some help, i have a qtek 9090 bought in germany so it has a windows mobile in German. Can you help me to change the ROM to an english or spanish version.
The info is:
ROM version: 1.40.01 GER
ROM datum:03/10/05
Radio version: 1.12.00
Protocol version 1337.42
Extended ROM version: 1.40.750 GER
Model: PH20B
Platform: PocketPC
IMEI 353030001525302
Can you explain me step by step or suggest me a page wuere i could find some instructions, i have another problem too, I don´t have a usb cable for it, please help me
Hi all,
Excuse me if apparentely it's can seems I repeat old and answred question, but sincerely I have not yet sufficentely clear ideas on how I can flash my blackstone with an updated Rom.
I want remark that I have a decent knowledge on developing a program for W.M., but I confess that after read various threads and articles about, I remained in a great confusion yet!
The question:
I have a branded (Tim) Blackstone:
BLAC100 32M
SPL-1.13.0000
MicroP-BlackStone (Led) v6
Device Info:
ROM Version 1.13.401.0 (20428)ITA
ROM Date 10/25/08
Radio Version 1.09.25.14
Protocol Version: 52.49a.25.26W
This device ABSOLUTELY need to be upgraded to the Rom 1.56 (but first of all I WANT TO UNBRAND it).
After an initial problem (caused by the unricognized S/N), I dowloaded (using another S/N) from Htc the File:
RUU_BlackStone_HTC_ITA_1.56.408.0_Radio_52.62.25.34_1.13.25.24_Ship.exe
To upgrade my device, I want to preserve only the country and the language, because I read that it is necessary to preserve the A-Gps funtionalities (data changes country by coutry). Is it thrue?
I understood that I can't use it, cause the Tim brand of my device.
In my case only the brand is not matching, while the language and country are apparentely matching.
(But, why the "401" of my device is not matching with the "408" of file I downloaded? Can I use the file with this unmatching country code?)
1) - I have a great confusion on SPL, HSPL, SSPL, USPL.
2) - I have a great confusion because I not understood if Radio Rom upgrade and Rom upgrade are 2 different processes or not.
3) - Is the Rom version related (developed) for a specific Hardware version (as it is logical to think)?
4) - Is the Radio rom "country sensitive"? (As I think that each country have a different GSM Net).
5) - If want upgrade both radio and rom, what instrument exactely I need?
Please can you clear my ideas.... and doubts?
Thanks
Ignazio
Ok, you have managed to get an official HTC rom, you can also find some more here
If you use HSPL or USPL, this will allow you to flash the new rom. If you are intending on staying on the official rom, uspl will probably be the best option for you to use.
In response to your questions:
1) SPL - Second Program Loader is a boot loader after IPL (Initial Program Loader) often seen on smart phones and PDA's. SPL is similar to a BIOS in a computer and can be flashed and updated.
The difference between USPL and HSPL:
* HSPL is an user-modified SPL that you have to flash to your phone. It overwrites the existing SPL on your device with a "hacked" one so to say. It allows you to bypass the HTC certificate check and flash unsigned or CID-mismatching roms to your phone. You only have to flash it once and then you can flash roms anytime.
* USPL is a temporary solution. It takes advantage of an exploit in the existing SPL and then loads a modified one to memory, effectively allowing the same thing as HSPL. However, since this is only memory-resident you have to do it each time you want to flash unsigned or CID-mismatching roms to your phone, because this exploited state is lost upon reboot. With USPL you must still have the right version of the HTC SPL that is compatible with the rom you want to use.
* SSPL is just another method of getting to change the spl and is only really needed if you experience problems using one of the other methods.
Hopefully this makes it a little clearer for you.
2) It depends. The radio is in most cases included in the rom. The rom you are looking to use included a radio. This is shown by the 1.13.25.24 in the name of your rom, so if you install that rom it will also update the radio in a single process. You can however also only upgrade the radio and then it is done as a separate process and will not affect the rom.
3) All the roms are initially developed for a particular hardware configuration I would imagine, but there are many fantastic chefs here on xda who take roms meant for other devices and are able to port some of the components to a cooked rom which can then be used on a number of different devices.
4) Yes, radios are country and area sensitive, so what works well for one person in a particular area would possibly not work as well for you.
5) You will need to use either hspl or uspl in order to upgrade your radio (if you are using one intended for an HTC). Some people have taken radios from other devices such as the Omnia, but in order to flash these radios you need to do a security unlock of your device and there are special tools that allow you to do this, but this is really only a last resort if you can't find an HTC radio that works for you.
The steps to follow in order to flash are described in the Dummies Guide to Flashing (see link in my signature) and if you have any further questions, please ask them in that thread.
Thanks for reply,
You cleared at least 70% of my doubts.
hurricane3000 said:
Thanks for reply,
You cleared at least 70% of my doubts.
Click to expand...
Click to collapse
Pleasure, so what are the remaining 30%?
Rom Problems..
hi..
i got my blackstone from service today because they changed my mother board.now i want to change my room to be more faster and have that winmo 6.5..i have read a lot but there are to many informations to understand..can someone tell me pls how i can change my rom,from first thing to the last and for that what rom to download?
step by step links or something would be great..i tryed myself but there is to many information for me to now what to choose..
thanks and i am looking forward for an answer
thekingro said:
hi..
i got my blackstone from service today because they changed my mother board.now i want to change my room to be more faster and have that winmo 6.5..i have read a lot but there are to many informations to understand..can someone tell me pls how i can change my rom,from first thing to the last and for that what rom to download?
step by step links or something would be great..i tryed myself but there is to many information for me to now what to choose..
thanks and i am looking forward for an answer
Click to expand...
Click to collapse
Read the Dummies Guide (link in my signature). If you have any more queries please post them in that thread as this one is likely to be closed down soon.
ROMS are a personal thing, so have a look at a few and read some of the more popular threads (ie the ones that keep popping to the top) and depending on the feedback received from users make a choice. Once you've flashed once it becomes addictive and you'll try a few before you find one that suits you.
another thing
after i follow all the steps from there all roms should work..after that finnishing them i start that rom update launcher that comes with every rom?
Continuing on Dummies Guide thread.......
As above, continue on dummies guide
Thread closed
Hi All,
I have used the search function - but ended up getting confused.
I have a Touch HD that I bought in January of this year (2009) from Mobiles.co.uk (Carphone Warehouse) and is on the O2 network (UK).
I have been using Dutty's ROMs (both 6.1 and 6.5) for months now - and have always used USPL when flashing, using the SD card method.
Over the past 3 days, my HD has been playing up.
When it started, I was using Dutty's R7. The radio was 1.14.something.something. The device was working perfectly, and I was really happy with the ROM and the way the phone was working. I had installed NO other applications with the exception of a different taskbar and obviously SDKCerts.cab
First of all, HTC Sense stopped working - it would cycle between "Loading HTC Sense" and "Tap here to launch HTC Sense"
Then, when rebooting the device, it just hung on the "Smart Mobility" screen. I left it in case it just needed a while to boot, but nothing.
I had no other option than to hard reset.
It worked OK for a few hours, but then HTC Sense started to crash again. So I flashed a new ROM - Lost in Asia or whatever it is called.
Same symptoms.
I flashed Dutty's R7 back and also the new 1.17 radio.
No joy.
The phone also hangs for ages on the Smart Mobility screen - perhaps a full minute where as before, it used to be no more than 15 seconds or so.
The following is displayed on the "Smart Mobility Screen"
1.17.25.09
52.69.25.37H
1.59.Dutty
The bootloader screen (before running USPL) shows the following:
BLAC100 32M
SPL-1.54.0000
MicroP-BlackStone (LED) V6
So the question I'm asking - is... Is my phone suffering some kind of hardware malfunction, or is this a known and fixable fault that I somehow have caused?
If the phone looks like it is malfunctioning, how would I go about returning it to stock so that the CPWH repair centre do not know it's had an unofficial ROM installed?
I'd like to add that whilst I'm very PC literate, I'm no programmer and a lot of the stuff here is alien to me hence my confusion - I just know how to flash a new ROM etc.
Thanks to anyone that takes the time to help me - I'd be really thankful to anyone that helps me sort this - be it tell me how to fix the device, or tells me to take it back!
Thanks in advance & Regards,
Chris.
Will D/L and flash Dutty's R0 Holy Grail ROM and see if that makes a difference...
If you've been using uspl than it will still be the stock spl and thus you could try to load the stock rom from htc.com specially designed for the touch hd(blackstone). I've read and heard from a lot of people that after flashing several roms and even hard resetting afterwards, some bits and pieces stay behind and flashing an original stock rom will undo this. I don't think it's a radio issue. And another big thing if you use dutty R7 that's a 1.56+ rom so you should have the right uspl olinex software to load these roms, if you used older software then problems with colouring and other things will appear.
a1gp said:
If you've been using uspl than it will still be the stock spl and thus you could try to load the stock rom from htc.com specially designed for the touch hd(blackstone). I've read and heard from a lot of people that after flashing several roms and even hard resetting afterwards, some bits and pieces stay behind and flashing an original stock rom will undo this. I don't think it's a radio issue. And another big thing if you use dutty R7 that's a 1.56+ rom so you should have the right uspl olinex software to load these roms, if you used older software then problems with colouring and other things will appear.
Click to expand...
Click to collapse
Thanks for the quick reply.
So is it perhaps better to revert to the original ROM before flashing a cooked ROM? I always Hard Reset twice after flashing as understand this helps.
OK - so the 1.56+ situation - I was under the impression that using the latest USPL (2.5) when flashing was OK? I have never had the colour problem... but perhaps if I'm flashing wrong then these problems could be to do with this?
Thanks again...
Chris
The Sense Manila has known bug that you need to press home to load it (sometimes).
For you case, I would suggest you to clean up your SD Card.
there may be several file that cause your system to freeze.
So, format your SD, hard reset.. and cross fingers.
Yes, It is better to revert to the original rom once in a while before flashing a new rom, if u used the latest uspl and the colours are ok, then you've done that right and it will probably be bits and pieces of old flashed roms floating around on the device.
Best to revert to stock rom and hard reset twice.
Afterwards flash the rom u want. If everything works again. U could hspl instead of uspl, hspl is more stable if u ask me. And you can go back to stock spl if you have waranty issues. there's a tut on that to in the rom section.
mcdull said:
The Sense Manila has known bug that you need to press home to load it (sometimes).
For you case, I would suggest you to clean up your SD Card.
there may be several file that cause your system to freeze.
So, format your SD, hard reset.. and cross fingers.
Click to expand...
Click to collapse
I forgot to mention - that was one of the things I did. Previously, I had loads of email folders from all the ROM installs.
Now I have a folder containing the useful CAB files that I need, and the ROM image file. Thats it.
It's only a 1gb card as my 8gb card gave up the ghost.
Thanks for the suggestion though and my apologies for not mentioning this in the initial post.
From reading the Dummies guide, am I right in thinking that in order to use a 1.55+ ROM (such as Dutty's Holy Grail R0) I only need to run USPL and then flash (as opposed to flash a newer SPL) as my stock SPL is already 1.54?
a1gp said:
Yes, It is better to revert to the original rom once in a while before flashing a new rom, if u used the latest uspl and the colours are ok, then you've done that right and it will probably be bits and pieces of old flashed roms floating around on the device.
Best to revert to stock rom and hard reset twice.
Afterwards flash the rom u want. If everything works again. U could hspl instead of uspl, hspl is more stable if u ask me. And you can go back to stock spl if you have waranty issues. there's a tut on that to in the rom section.
Click to expand...
Click to collapse
Thanks for this - I didnt realise the device would retain bits and bobs, and you may well be right in that things are getting corrupted in there!
Which is the best stock ROM to flash - is there a link to one? I looked on the Wiki and there seem to be loads... which will work on a UK T8282?!
Thanks again!
Chris
constablechris said:
I forgot to mention - that was one of the things I did. Previously, I had loads of email folders from all the ROM installs.
Now I have a folder containing the useful CAB files that I need, and the ROM image file. Thats it.
It's only a 1gb card as my 8gb card gave up the ghost.
Thanks for the suggestion though and my apologies for not mentioning this in the initial post.
From reading the Dummies guide, am I right in thinking that in order to use a 1.55+ ROM (such as Dutty's Holy Grail R0) I only need to run USPL and then flash (as opposed to flash a newer SPL) as my stock SPL is already 1.54?
Click to expand...
Click to collapse
what do you mean hang for age?
1 minute is nothing if it turns out boot up.
There are chances that the nand flash needs to refresh and wasted some times. But it won't be forever.
constablechris said:
Thanks for this - I didnt realise the device would retain bits and bobs, and you may well be right in that things are getting corrupted in there!
Which is the best stock ROM to flash - is there a link to one? I looked on the Wiki and there seem to be loads... which will work on a UK T8282?!
Thanks again!
Chris
Click to expand...
Click to collapse
there's an original rom on htc.com for blackstone just use that one.
hope it will turn out right for you
I thought I'm the only one who had this problem. Last Sunday my blackstone started to freeze on the smart mobility screen too. I flash 3 different roms because I thought its an rom issue with no luck. On Monday it even managed to hardreset itself after I waited for about 15 min in the smart mobility screen.
After that I flashed a stock rom and it seem to be fine by now.
But now I will flash a custom again, the stock one is so 6.1
Hello guys,
I am having serious issues with my HD, and the best solution is to send it back to be repaird, or trow it away...
F.Y.I. the problem is screen going black, or without backlight, or not starting quick, and continuing black.. or the infamous "MICROP FIRMWARE MISMATCH"
To make it a bit worse, I bought it second hand, and I have to prey that the phone is not 2 years old... (guess to be seing in the sticker info on stock number, or part number...).
So... I had a lot of fun in this forum, installing HSPL, and diferent roms.., and guess.., I have to put everything back to original to try to get it fixed.
First, I will show what the info on the Phone is..
R 1.13.25.24
G 52.62.25.34U
D 1.56.47501
BLACK100 32M
SPL-1.56 OLINEX
My questions (and I guess lots of people's question too) are:
1) How to downgrade my SPL to an "official" one
2) Which one could that be (number)
3) Which official rom to use (number), to make it matching SPL.. MUST BE AN WM 6.1
4) Is my radio version "stock"?
5) can I flash Stock rom, and then AFTER stock SPL? to avoid to have to use USPL to flash stock rom after..
6) Does the Stock rom comes with its own radio?
Requests
1)Dummie capable help
2)Where to find stock SPL'S for this phone.
3)Some link to tutorials HOW TO...flash stock SPL
4)Link to downloads to WM 6.1 stock rom (HTC Support doesn,t have them, only upgrades). Dutch should be the languaje, but if not, WWE should do...
5) Where to get some luck...
I know its a lot what I am asking, but, after hours of looking arround, and lots of tabs on my explorer, I am just confused..., and believe that many people are in the same situation.
I have ony seeing upgrade guides, but not yet an downgrade guide sticking nowhere, and ways of dealing with manufacturer due hardware problems, and I mean, the way to set your phone back to standar, or the proper way to back up everything before we make it "really user friendly", which, acording to manufacturer, is ILEGAL,
Everybody's reply's will be trully apreciated
Well, I found the "STOCK" rom on the HTC site.
It has already the radio included.
RUU_BlackStone_HTC_NLD_1.56.404.1_Radio_52.62.25.34_1.13.25.24_Ship
For everybody's info, the only way to download it, is by filling the Serial number of the phone (behind the battery) in the HTC Website(support).
It was an unlocked phone, so, I choosed EU version, and after filling the serial number, gave me automatic.. Dutch languaje (good enough to send it to Service).
So, I guess that if you want to change the lenguaje of your phone on an official rom, and is not possible with your phone serial, you will just have to request it.
I just flashed it with SPL 1.56 OLINEX, and he just won't start..., just have to let him rest couple of hours, or try to start it tomorrow (vibrates after 1 minute, and wont start), so, If everything goes ok, .. stock SPL, and "send it back"
This might be helpful: http://forum.xda-developers.com/showthread.php?t=431217.
First you have to sure what was your original SPL version, and Radio version.
Good luck.
I flashed thesame rom when I had to send my phone back to claim warranty. I use spl 1.14. My phone was repaired for free so I think I did it right ^^
edit: just follow the guide philrom posted anf you'll be fine . The stock rom you flashed already includes a (stock) radio, so after flashing spl 1.14 our phone is good to go
1.14... and will be ok for warranty.... so, 1.14 will be
Apreciate the info, let's hope that service will do their job, so I can go back to WM 6.5!! , and off course custom roms..
Again, tks. I will let you know how everithing turned out.
Juan