Related
Is anyone else having difficulty instlling Tomtom on the new o2 ROM? I get as far as selecting a voice and it shuts down. If I open it back up again, I just get asked to select the language again. This happens with 5 and 5.1. Any ideas? I've got Blackberry, but lost tomtom
Anyone?
Mine works perfectly, although i did install the voice separately afterwards.
How strange! Any ideas?
Fin
Mine works perfectly, although i did install the voice separately afterwards.
How strange! Any ideas?
Fin
I'm tearing my hair out here! How do you go about installing the voice separately?
Cheers
I have a suggestion
When I had this problem before, it was because I was missing the zip directory in the \Program Files\Navigator folder. Check here first!
TT5 problems....
Are we talking about the Genuine TT5 or a hacked version???
No, genuine. That's what I don't understand!!
TT5
Bugger - cos I'm due to update mine tonight/tomorrow !
I'll post my results tho...
Let me know how you get on. Looks like I'll have to try a hard reset. Why didn't I install TomTom first?
Don't know if this is helpfull or just rubbing salt in it, but after ROM update, first thing I installed was Tomtom and it went on fine and runs with no problems.
Hi
Just installed tomtom 5, i had to install v5.0 tested it, then installed v5.1 update & re-install the voice file, i all so removed o2 active...
now it work`s i had the same problem tomtom closed after selecting voice file unless i removed the maps directory.....
hope it helps
Well, I did a hard reset and installed and it works fine. Very bizarre and very annoying. I'll do a list of what I have (read had) installed at the weekend and see if we can identify a conflict. Very irritating! :?
Cheers guys.
Greetings I've just got a Vario III (T-mobile) having upgraded from the Wizard (Vario I) the Vario I came with co-pilot gps mapping software - now I've got the Vario III i've copied the files across from the Co-Pilot data card to the Micro SD on the Vario III. It's installed fine on to the Vario III but when I try to run CoPilot it won't open tells me "unable to open CoPilot check the storage card is inserted and data downloaded properly" - well the card is in fine and readable.
So my question is, is CoPilot 6 Live compatible with Windows Mobile 6?
Cheers guys
I have copilot running on my TyTN II so it is possible. Works like a charm with the inbuilt GPS.
Anyway back to your problem check you have copilot in capitals as a folder in storage card/ it should contain datacd save and speech. Without this folder copilot will not run. I had the same error as you as I just copied over the program files originally, copy it over and you should be good to go (you will have to reactivate it though). If you copied over the 2577 folder and installed it from there then I cant see why it isnt working.
Anyway hope this helps
I can confirm that Desktopflame has got it spot on, as I've just followed his instructions and installed CoPilot Live 6 to my 6 Gb. SanDisc MicroSDHC, stuck it into my Vario 3, installed, reset, run, activated and taken it for a short test walk!
BTW I seem to remember reading on this forum that a couple of people thought the GPS receiver was rather a weak point, but so far I've had no problems with lock speed, (around 20 seconds and didn't need to use Quick GPS), accuracy, (it had me right where I should've been), or even signal strength, (to the point where I even maintained a lock when I inadvertantly walked into the kitchen forgetting to quit the thing, although I should point out it was less than a minute before I did shut it down so I'm not too certain how long it would have been before I got a little message if, even at all.
So, all in all, very satisfied.
I posted the problem in another thread yet (as a reply). I open a new thread because the problem is again here unfortunately.
The problem first occured after the installation of the TomTom app.
After installing and downloading and installing the included map everything works fine. But then I connect the TyTN II to the PC and the TomTom Home application. The app was searching for updates for the installed TomTom Navigator. It brings up the message that a update is available, it was the "phone database - connect2internet" update. And now that's the strange and very annoying part: After installing the update, the phone doesn't play ANY kind of ringtone on an incoming call and the ringtones are very low.
Neither removing the TomTom app nor doing a soft reset solved the problem. After a masterreset everything was fine again. I installed then all apps (except TomTom) needed again and did a backup with Sprite Backup. After this I installed the TomTom Navigator again with the update... same problem! No ringtones on incoming calls. I did then a restore and all was ok again.
But this evening I called me myself and no ringtone was played. That's so annoying. A phone should really not have such problems. It seems that the problem is not TomTom dependent. I have these apps installed:
-TomTom Navigator
-Sprite Software Sprite Backup
-PocketCM Keyboard
-Pocket eSword
-Microsoft SQLE 2.0
-Mobipocket.com Reader
-PocketCM Contacts 0.15
-Saman SMSDeliveryReceiptFix
-MohairSofa Calendar+ Today Plugin
I hope that you can help me, I really don't know what I should do anymore.
Thank you very much in advance
Best regards
JCD.SAG
JCD.SAG said:
I posted the problem in another thread yet (as a reply). I open a new thread because the problem is again here unfortunately.
The problem first occured after the installation of the TomTom app.
After installing and downloading and installing the included map everything works fine. But then I connect the TyTN II to the PC and the TomTom Home application. The app was searching for updates for the installed TomTom Navigator. It brings up the message that a update is available, it was the "phone database - connect2internet" update. And now that's the strange and very annoying part: After installing the update, the phone doesn't play ANY kind of ringtone on an incoming call and the ringtones are very low.
Neither removing the TomTom app nor doing a soft reset solved the problem. After a masterreset everything was fine again. I installed then all apps (except TomTom) needed again and did a backup with Sprite Backup. After this I installed the TomTom Navigator again with the update... same problem! No ringtones on incoming calls. I did then a restore and all was ok again.
But this evening I called me myself and no ringtone was played. That's so annoying. A phone should really not have such problems. It seems that the problem is not TomTom dependent. I have these apps installed:
-TomTom Navigator
-Sprite Software Sprite Backup
-PocketCM Keyboard
-Pocket eSword
-Microsoft SQLE 2.0
-Mobipocket.com Reader
-PocketCM Contacts 0.15
-Saman SMSDeliveryReceiptFix
-MohairSofa Calendar+ Today Plugin
I hope that you can help me, I really don't know what I should do anymore.
Thank you very much in advance
Best regards
JCD.SAG
Click to expand...
Click to collapse
What happened with your settings? Are they still "normal", or can you see that the volume has changed to mute for example?
I've heard some people having problems with HTC Home changing profile settings to auto.
johanromijn said:
What happened with your settings? Are they still "normal", or can you see that the volume has changed to mute for example?
I've heard some people having problems with HTC Home changing profile settings to auto.
Click to expand...
Click to collapse
The settings are normal as they should be. It's also strange, that the ringvolume is much lower now than before when trying to play a ringtone in the settings. (The volume in the settings is the same).
JCD.SAG said:
The settings are normal as they should be. It's also strange, that the ringvolume is much lower now than before when trying to play a ringtone in the settings. (The volume in the settings is the same).
Click to expand...
Click to collapse
Just for others (and mine) info.
Is your device a Tilt or a Kaiser?
johanromijn said:
Just for others (and mine) info.
Is your device a Tilt or a Kaiser?
Click to expand...
Click to collapse
It's a unbranded TyTN II (Kaiser).
Can nobody help me??
Best regards
JCD.SAG
You seem to tbe the only tomtom home user who is having this problem. So lets start at the beginning:
1) When you test the device, is it definitely in normal/ringer profile?
2) What have you set incoming calls to do in start, settings, sounds and notifications, notifications tab?
3) If both above are correct, does the phone vibrate if you change them to vibrate options?
unwired4 said:
You seem to tbe the only tomtom home user who is having this problem. So lets start at the beginning:
1) When you test the device, is it definitely in normal/ringer profile?
2) What have you set incoming calls to do in start, settings, sounds and notifications, notifications tab?
3) If both above are correct, does the phone vibrate if you change them to vibrate options?
Click to expand...
Click to collapse
Thank you for your reply.
1) Yes, there is the normal profile activated
2) There are all the normal settings (manufacturer settings)
3) This one I can't check now becuase I did a masterreset already
The strange thing too, is that the ring volume is suddenly very low. This occurs at the same time with the no ringtone on incoming calls problem.
It seems that the problem is not related with the TomTom. Maybe with another app like PocketCM, Keyboard CM or ???
Thank you again and best regards
JCD.SAG
Only way to find out is to take them off, then install tom tom and then test the device. If all is well, then add back one program at a time and test.
You may actually find that instaling them in a different order fixes it (some early WM6 roms would only allow some apps to work if you installed them after certain others and before yet more).
Thank you again for you replies. Yesterday on midday the problem was here again, no ringtones on incoming calls. Not even the restore of a backup made previously helped. One day before the restore could solve the problem.
I decided in agreement with the HTC Support and the service centre to send the device to the service center for repair. I really hope that they can solve the problem.
Best regards
JCD.SAG
I as well am having this problem! It is extremely annoying as I have already taken the phone back and had it replaced and now the new one is doing the same thing.
I also had TomTom installed though?
Don't update to the newest TOMTOM using the Home Application. The update isnt even for the TYTN II, it's for other devices that need it. My TOMTOM version is 6.010 (7720) GPS Driver v1.20 MAP USA and CANADA v650.1109 - v675.1409
Everything works perfect including Trafic and I do not use the TOMTOM HOME for the fact that I do not need any sh-tware on my PC.
jackieboy said:
Don't update to the newest TOMTOM using the Home Application. The update isnt even for the TYTN II, it's for other devices that need it. My TOMTOM version is 6.010 (7720) GPS Driver v1.20 MAP USA and CANADA v650.1109 - v675.1409
Everything works perfect including Trafic and I do not use the TOMTOM HOME for the fact that I do not need any sh-tware on my PC.
Click to expand...
Click to collapse
Today I phoned to the repair centre where I sent my device to. They told me, that the TyTN II is already on the way back to me. They changed the flexboard. I suppose this is approximately the same like the mainboards in the computers. I hope I'll get it today an I hope really that the problem has been solved. I will install the tools I need and then let's see...
Best regards
JCD.SAG
Yesterday I got my TyTN II back from the repair centre.
But it's unbelievable, the same problem occured this morning again. No ringtone played on incoming calls. And now the battery cover doesn't fit good to the device now. It's so annoying! I have to send the device back to the service centre again. I can't believe it!
Regards
JCD.SAG
Fixing Ringtones
I had this problem and worked out how to fix it.
Look at the following Reg Key (change midifile to mp3file for mp3 issues)
Delete any EventSoundHandlers already in place and add this Key.
[HKEY_CLASSES_ROOT\midifile\Shellex\EventSoundHandlers\{245F94CF-DD9C-46F9-B4C8-D2B14A877893}]
@="XME EventSound Player"
Problem fixed.
David
On a different thread I have been looking for a fix for a voice instruction problem where the voice 'cuts-off' before the end of the command.
I get 'After 200 yards...' but no more, when the command should be 'After 200 yards, turn left'.
So, I re-flashed my device (which was a Vodafone v1615, with Vodafone ROM) to the standard HTC ROM, and re-installed TomTom.
Same problem!
So, my question now is, how many other Kaiser users with TomTom suffer the same problem?
I'm really beginning to think this is an issue with the version of TomTom with internal GPS...
Any others have comments on this?
I have the same with my TomTom and every rom for Kaiser so I think it's the TT version. Doesn't make any difference if the voice is installed on device or microSD card.
never experienced this issue,
Do you have a legitimate copy of tom tom on your devices?
Hi,
I have the same TT voice problem: "after ..." then nothing !!!
I 've tried with Tomtom V6.00, 6.03 but I have the same problem.
My ppc phone is LG KS20 on WM6
+++ Important note: I used TT V6.00 with my old HTC S110 running on WM2003SE and I don't have this problem. But when I changed to KG KS20 (wm6), I get this probleme with the same maps, same version of tomtom (same installation: tt6ifalleni.cab). Tested with 2 maps v675.1409: FR_plus & Western_Europe -> same voice problem.
Please help !!!
I've read a couple threads where people complain about the voice not completing,and they indicated that the fix for them, if I remember correctly, was moving the voices to the main memory from the SD card.
Hi ewingr,
That was a post from me when I thought it had fixed the problem - it didn't, although it seemed to work for a while - hence the post...
Still looking for the fix!
Oh, and everything is legit - as supplied with the CD that came with the device, and the small 'town' map your area able to download for free.
Used to use a Qtek 9100 - with no problems!
ewingr said:
I've read a couple threads where people complain about the voice not completing,and they indicated that the fix for them, if I remember correctly, was moving the voices to the main memory from the SD card.
Click to expand...
Click to collapse
All my voices are in the SD card. I tried also to put them in phone memory (/navigator/voices) and had always this problem. Voices are selected in TomTom but not completing !!!
Have now tried an older version of TomTom (6.030), and still have the same problem.
Also placed map and Navigator all in device memory, and still same problem...
What the %*!$ is going on???
How many other people are suffering this? Does no one have any other ideas I can try?
i had this problem too
i deleted these files, MapSettings.cfg, TMCCODES.DAT, TRAFFIC.DAT, TRAFFIC.INC (where u place ur map). then i reset tomtom back to default setting. and i still have same problems, then after 2 or 3 uses of tomtom in two days. Now it's back to normal. I use TT6.030.8320.
Hope this help. I thought iam the only one
TT6.01 is working perfectly for me, but i have problem recieving call while using TomTom. that's right, i switch to 6.03.
hi all. i am running TT 6.030 on my unbranded kaiser with no flaws whatsoever. the internal gps works a treat. its not the most legit copy going, anyone browsing mininova.org could find it. i have all the voices installed to the sd card, however i have never used any of the "supplied" voices. i use the john cleese voice which i also "found"
no tomtom voice problems with me either, and i also place my voice files in the sd card. as for the voice type, i use a knight rider one . you can find many more of these custom voices here
http://gps-data-team.com/pda-gps-navigation/links/index.php
Same voice cut-off problem on my At&T Tilt using TT Version 6.032 (8351)
Had to use that TT version because I could not install previous versions onto the device. That was the only version that would load.
Are any of the people that don't have the cut-off voice issues using an AT&T-branded device?
yup, i use a tilt
XtreMe_G said:
yup, i use a tilt
Click to expand...
Click to collapse
what version of tt?
mbn said:
what version of tt?
Click to expand...
Click to collapse
version 6.020
waichai, are you saying deleting those files fixed the problem?
eugene7 said:
waichai, are you saying deleting those files fixed the problem?
Click to expand...
Click to collapse
for me, yeah, becuz i tried everything (all the tomtom version), but make sure u backup ur original file first, then u open start tomtom, tomtom will automatically create the new files for u.
I am running TT 6.032 and having no problems at all with the John Cleese voice. I did notice there were some problems with a few other voices I tried....Sean Connery, Naughty Natalie etc in that they would be cut off as they are taking too long and the instruction has passed due to speed and position...
I really don't believe it has anything to do with your ROM version.
waichai said:
for me, yeah, becuz i tried everything (all the tomtom version), but make sure u backup ur original file first, then u open start tomtom, tomtom will automatically create the new files for u.
Click to expand...
Click to collapse
Same problems. TomTom Version 6.032, Map Western Europe v.675.1409. Original TyTN II. All legal. I saved the files you mentioned on my desktop. Restarted TomTom and so far it recreated the MapSettings.cfg and the traffic.inc. Not the traffic.dat or the tmccodes.dat though. Will use it tomorrow and see if it works again. Thanx for the help.
Hi, have problems with Kaiser.
1)The touch screen some is blocked. I push on the sreen because the pda not responde. Then some times it's all ok. I have do the hard reset too.
2)Tom Tom: I insert the maps on microsd and i install the program in microsd, but when i start the program it tell: "No maps". Then i look the installation folder of tom tom on the pda phone, but i choice installed on microsd.
Help me.. thanks
1) What ROM are you using? I also have this issue sometimes... it seems like the screen is more responsive sometimes than others. I havent searched yet, but if someone has the answer that would be great.
2) Disable 'Bluetooth Explorer' - Settings>Connections>Bluetooth>FTP Tab>Uncheck BT explorer
1) I used the T.I.R of maja... but this problem is normal or my pda is damaged?
2)I uncecked BT Explorer, but the problem is not resolved. Tom tom say "no maps" too
Help me.. my pda is damaged?
with tom tom i had the same probs sulutioni had the wrong maps instaled the new ones and no more probs
The blind leading the blind....
Start off by creating signatures so that others know what you're working with!
When you're finished with that, go HERE
I dont' understand. For the first problem the problem is my pda or this is a popular problem? And for the tom tom? Don't work...
hallo
sorry for my englisch
first copy your tomtom map to your sd kaart
and instal the tomtom cab to your kaiser not on your sd kaart
then follow the instruktions by clicking on tomtom on your home screen
you may first delete al your previous tomtom
and yuse tomtom 6 or higher hope i help you with this
http://rapidshare.com/files/88452211/ttn_6_032_8351_HTCNLD.cab.html
Very thanks!! And for the first problem? Is a problem of my pda?