Related
hi.
i have received requests from many guys, to make enable BT DUN
profiles on hw6900.
this means, connect internet via BT through cell phone like Nokia phone.
You can get connect 3G or CDMAx1 which hw6900 can not connect them.
now all english interface
PLS try guys.
--------------------------------
if you own hw6500 with pocket pc200se.
go to this link.
http://asukal.net/blog/?p=366
or
http://asukal.seesaa.net/article/5273848.html
Will this file work on the HP iPAQ 5915 running WM5.0? I want to do BT DUN from the 5915 using the hw6925 as the cellular modem.
Thanks,
Rick
rickrcomm said:
Will this file work on the HP iPAQ 5915 running WM5.0? I want to do BT DUN from the 5915 using the hw6925 as the cellular modem.
Thanks,
Rick
Click to expand...
Click to collapse
hi, 5915 has widcomm BT stuck?
If so, pls check the Version of BT.
Go to BT setting, About---and then tap Advance.
You can see the Version of Stuck.
If that version was 1.7.16700 or near to this,
Hopefully it will work.
But i dont have that device, so couldnt test on that.
PLS test as on your own risk.
(If it will not work, you have to hardreset to recover,
pls make back up your date in advance)
Hi,
Thanks for this BT DUN for the hw6900. I just installed it on my hw6945 and works great. But I can no longer use ActiveSync. It seems like the install affected the communication port for the USB. I continue to receive an error. "USB device not recognized" Is there a work around for this. When I hard reset it works, but when I re-install the Blue tooth dial up client it stops working. Thanks in Advance.
hi
i didnt face to that problem cose of this patch on my device.
But i often see that problem on my another devices
in that case, pls try following way
@Start Menu--Setting--Connection
@Tap "ActiveSync Mode" icon
@Swtich to RNDIS Sync Mode or USB Serial Sync Mode
(better try both mode, and then you can find which mode can work on your device)
Thank you, that worked. I can know access the internet using my hw6945 with my Razr V3xx as the dial-up modem.
china99boy said:
Thank you, that worked. I can know access the internet using my hw6945 with my Razr V3xx as the dial-up modem.
Click to expand...
Click to collapse
Ok, pls enjoy that!
Hi, this may be off the topic, but I installed Mobem Mphone on my Hw6945 pda so I could send and receive SMS via the bluetooth dun. The installation went well. The problem is, it does not give me the option to select Bluetooth in the drop down menu. I could only select Serial or Infrared. Instructions says that I should select Bluetooth and then select port BTC1. Does the Bt hack not provide this option or is there something else I should do. If I select Serial I am able to select COM6 which is the outgoing BT serial port on the PDA, but I get an error that no bluetooth serial port could be found on the razr v3xx. So I assume I need to have the Bluetooth BTC1 available before I can do anything. This website shows what I am trying to get done.
http://www.mobem.com/products/mphone26/qtour/6310/5450_mp_setup.htm
Any advice will be greatfully appreciated. Thanks
I might turn out to be stupid, but I see no point in doing such a thing ? what for ? 6945 has SIM card in it and can connect to internet using GPRS, which is more than enough on such a small screen ? I fail to see the point, please, enlighten me ?
I am may be the stupid one, but I know that the hw6945 has sim card and can connect with the gprs. That also works great. I normally use my Razr V3xx for my primary phone and only use my PDA occassionly. Instead of switching the sim card everytime, I just wanted to retrieve the SMS or surf from the pda via BT using my V3xx. I just tried to do the above with Indovisi SMS and that works great, so I will just use that instead. I loved the features of mPhone better so I was trying to get that working. It probaly doesn't make much sense since the hw6900 can do it all. Thanks for your help anyways.
hello,
i've just upgraded to wm2006. before when i've placed the device in the dock it would use my pc's internet connection and i could be able to surf via pocket ie or update weather info etc. doesnt seem to work after the upgrade. any ideea?
device is an o2 xda II, active synch 4.5.0 (build 5096), win xp.
any ideeas?
thanks.
mindwar said:
hello,
i've just upgraded to wm2006. before when i've placed the device in the dock it would use my pc's internet connection and i could be able to surf via pocket ie or update weather info etc. doesnt seem to work after the upgrade. any ideea?
device is an o2 xda II, active synch 4.5.0 (build 5096), win xp.
any ideeas?
thanks.
Click to expand...
Click to collapse
Did you turn this option on in AS? Firewall isn't blocking it? Then... make sure you didn't screwed internet options in Settings->Connections - it should be automatic.
utak3r said:
Did you turn this option on in AS? Firewall isn't blocking it? Then... make sure you didn't screwed internet options in Settings->Connections - it should be automatic.
Click to expand...
Click to collapse
well when i fist got the device and installed active synch it just worked. didnt have to change anything.. any special setting i need to make after upgradeing from 03 to 06?
not running any firewall (windows one included)
settings->connection doesn't show any connection. under the advanced tab "use work network" is selected.
mindwar said:
didnt have to change anything.. any special setting i need to make after upgradeing from 03 to 06?
not running any firewall (windows one included)
Click to expand...
Click to collapse
OK - which ROM did you flash? Check your "Settings->connections->USB-to-PC", it should have "Advanced networking" checked on.
mindwar said:
settings->connection doesn't show any connection. under the advanced tab "use work network" is selected.
Click to expand...
Click to collapse
Well, that's perfect...
utak3r said:
OK - which ROM did you flash? Check your "Settings->connections->USB-to-PC", it should have "Advanced networking" checked on.
Well, that's perfect...
Click to expand...
Click to collapse
used TOFCLOCK HIMA WM6 AKU.0.7.0 CE OS 5.2.1908 (Build 18508.0.7.0)
advanced network functionability is checked.
mindwar said:
used TOFCLOCK HIMA WM6 AKU.0.7.0 CE OS 5.2.1908 (Build 18508.0.7.0)
advanced network functionability is checked.
Click to expand...
Click to collapse
Hm.
After flashing AS performed a new device setup, right? The last question (after setting up, which items are to be synchronized) is this device is allowed to use Internet connection. Are you sure you've checked it? If so... well, I don't know
same problem here... and i am sure i checked the use of internet conection...
utak3r said:
Hm.
After flashing AS performed a new device setup, right? The last question (after setting up, which items are to be synchronized) is this device is allowed to use Internet connection. Are you sure you've checked it? If so... well, I don't know
Click to expand...
Click to collapse
hm, dont remember beeing asked that..
any way i can set it up without reflashing?
mindwar said:
any way i can set it up without reflashing?
Click to expand...
Click to collapse
Of course. In AS (while having PDA unconnected) choose "delete partnership", and then connect your Hima, it will resetup the partnership.
utak3r said:
Of course. In AS (while having PDA unconnected) choose "delete partnership", and then connect your Hima, it will resetup the partnership.
Click to expand...
Click to collapse
did that, still the same unfortunatly.
though i did find out that wm06 creates a local area connection.
i tried to share my desktop's internet connection with the wm created one but still nothing yet.
doesn't anyone with wm6 use internet connection through usb or craddle???
boditza said:
doesn't anyone with wm6 use internet connection through usb or craddle???
Click to expand...
Click to collapse
Well, I am using. Everyone's using It's just it's working perfect for most of us... I really have no idea, what's going on with you two
ok. google helped me find an answer on another board.
for anybody intrested - http://www.aximsite.com/boards/activesync/137666-fix-unknown-error-0x80072f78.html
(hope there's no problem with posting the link but i figured someone might need this too).
cheers utak3r for the help!
thanks for share...
mindwar said:
hello,
i've just upgraded to wm2006. before when i've placed the device in the dock it would use my pc's internet connection and i could be able to surf via pocket ie or update weather info etc. doesnt seem to work after the upgrade. any ideea?
device is an o2 xda II, active synch 4.5.0 (build 5096), win xp.
any ideeas?
thanks.
Click to expand...
Click to collapse
I had the same problem and I solved using using Activesync serial connection, see my post #45 :
http://forum.xda-developers.com/showthread.php?t=329202&page=5
ciberus said:
I had the same problem and I solved using using Activesync serial connection, see my post #45 :
http://forum.xda-developers.com/showthread.php?t=329202&page=5
Click to expand...
Click to collapse
thanks ciberus. I've managed to find an answer without needing to change connection type. see my post above.
glad you've posted though so we can have both solutions in a single place (I wasn't able to find your post by searching the forums before I started this thread). cheers
Mine got solved like this...
http://forum.xda-developers.com/showthread.php?p=3787583#post3787583
Cheers
hi,
Can someone tell me how to connect to WLAN ?
the connection disconnect every few seconds, why ?
thnx
Maybe you used wrong settings, you are (nearly) out of range or the accesspoint uses a MAC-Filter.
How can i get online on my Laptop
with the help of My Phone At&t Tilt ?
is there a cab for it ? or ?
Please Help
ilordvader said:
How can i get online on my Laptop
with the help of My Phone At&t Tilt ?
is there a cab for it ? or ?
Please Help
Click to expand...
Click to collapse
Use Internet Sharing via USB or Bluetooth if you laptop supports it. Works great. No need for cabs or anything. You may need Active Sync installed on your laptop (can't remember since I have it installed anyway).
ecltech said:
Use Internet Sharing via USB or Bluetooth if you laptop supports it. Works great. No need for cabs or anything. You may need Active Sync installed on your laptop (can't remember since I have it installed anyway).
Click to expand...
Click to collapse
what ecltech said. And YES you need activesync installed or else your pc won't realize your device and ask you to add new hardware. With activesync it updates the usb drivers to recognize that you are connecting your device and sharing its internet.
Haven't tried the Bluetooth way yes so I wouldn't have an answer for that one.
ecltech said:
Use Internet Sharing via USB or Bluetooth if you laptop supports it. Works great. No need for cabs or anything. You may need Active Sync installed on your laptop (can't remember since I have it installed anyway).
Click to expand...
Click to collapse
Thxs ill try it
Bluetooth works fine. When you configure the Bluetooth on your laptop use advance configuration so you can use the WAP setting. Otherwise it defaults to the modem and asks you for dial settings/etc.
ilordvader said:
How can i get online on my Laptop
with the help of My Phone At&t Tilt ?
is there a cab for it ? or ?
Please Help
Click to expand...
Click to collapse
Couldnt do it
Can anyone give me step by step instructions
PLEASE
Is it possible to use my Kaiser to connect my laptop to the internet to make browsing easier than looking at the small phone screen. If so what software/hardware do I need.
Thanks
alanwesty said:
Is it possible to use my Kaiser to connect my laptop to the internet to make browsing easier than looking at the small phone screen. If so what software/hardware do I need.
Thanks
Click to expand...
Click to collapse
hmm ... did u search or bother reading the manual that came w/ the kaiser?
the answer is yes and ur carrier will charge extra for this ... unless u r smart and don't download 10gb of data using ur phone.
alanwesty said:
Is it possible to use my Kaiser to connect my laptop to the internet to make browsing easier than looking at the small phone screen. If so what software/hardware do I need.
Thanks
Click to expand...
Click to collapse
Umm....yes. It's in the owner's manual that came with your device. The program is Internet Sharing.
Hardware needed= 1xKaiser and 1xLaptop/PC
Software needed=Bluetooth on Laptop/PC
Method:
1. Enable visible bluetooth on Kaiser
2. Enable visible bluetooth on Laptop/PC
3. Go to START>PROGRAMS>INTERNET SHARING on the Kaiser and CONNECT
4. On Vista go to Network connections panel and choose Connect to PAN Buetooth network.
Should be done. Just beware of your data usage as you could run up a heck of a bill if you go crazy surfing and downloading.
MACkjam said:
Umm...crazy surfing and downloading.
Click to expand...
Click to collapse
iol i need what u take
MACkjam said:
Umm....yes. It's in the owner's manual that came with your device. The program is Internet Sharing.
Hardware needed= 1xKaiser and 1xLaptop/PC
Software needed=Bluetooth on Laptop/PC
Method:
1. Enable visible bluetooth on Kaiser
2. Enable visible bluetooth on Laptop/PC
3. Go to START>PROGRAMS>INTERNET SHARING on the Kaiser and CONNECT
4. On Vista go to Network connections panel and choose Connect to PAN Buetooth network.
Should be done. Just beware of your data usage as you could run up a heck of a bill if you go crazy surfing and downloading.
Click to expand...
Click to collapse
I do it with the USB cable. BT just frustrates me.
does this also work in reverse?
i mean i have a internet connection on my laptop and i want internet on my tytn.
its conected with an usb cable.
Thanks, like most people reading the manual comes last - apologies
kaasaanfiets said:
does this also work in reverse?
i mean i have a internet connection on my laptop and i want internet on my tytn.
its conected with an usb cable.
Click to expand...
Click to collapse
I don't see why you would want to do that. A computer is way cooler then a silly xda.
kaasaanfiets said:
does this also work in reverse?
i mean i have a internet connection on my laptop and i want internet on my tytn.
its conected with an usb cable.
Click to expand...
Click to collapse
When your PDA is connected to ActiveSync it gets access to the laptop's internet connection, so yes. Install ActiveSync and connect the phone. No partnership needed, guest is ok.
ChumleyEX said:
I don't see why you would want to do that. A computer is way cooler then a silly xda.
Click to expand...
Click to collapse
To update weather en other things i need an internet connection for.
@kilrah
yeah that makes much sense but that doesnt work, do i need to configure something on my xp pc or something?
thesire said:
hmm ... did u search or bother reading the manual that came w/ the kaiser?
the answer is yes and ur carrier will charge extra for this ... unless u r smart and don't download 10gb of data using ur phone.
Click to expand...
Click to collapse
uh..doesn`t this defeat the purpose of unlimited data plan or are they really that bad? I pay $30 for the unlimited data plan with AT&T for 3G (even HSDPA) in my area. Heck my home DSL costs me about same and sometimes I download like tomorrow isn`t coming. lol.
Has anyone ever had a problem with this before?
Flandrel
kaasaanfiets said:
yeah that makes much sense but that doesnt work, do i need to configure something on my xp pc or something?
Click to expand...
Click to collapse
go to settings->connection->usb to pc and check enable advanced network functionality
i am using dutty's diamond v1 which does not have internet sharing anymore. how do i put it back?
WMWifirouter is a great app for tethering. I use it all the time and version 1.20 comes with some great features for usb/BT tethering that kick the **** out of internet sharing that comes with WM
MACkjam said:
Umm....yes. It's in the owner's manual that came with your device. The program is Internet Sharing.
Hardware needed= 1xKaiser and 1xLaptop/PC
Software needed=Bluetooth on Laptop/PC
Click to expand...
Click to collapse
Not to be a complete smartass, but Bluetooth is a physical hardware radio device....not software ( via an internal card or USB adapter). I only mention this in the case the original poster ( who obviously didnt open his manual or do any sort of research ) thinks he can download a piece of software to make his PC have bluetooth.
Again, not flaming or picking a fight ....... just making sure he has no confusion
Ciao
Hi Comunity...
I have a question about the x1... Is there any chance to use this phone via usb as a wlan adapter? So i dont need to buy a stick or pcmcia??
Regards Screamor
screamor said:
Hi Comunity...
I have a question about the x1... Is there any chance to use this phone via usb as a wlan adapter? So i dont need to buy a stick or pcmcia??
Regards Screamor
Click to expand...
Click to collapse
Yes there is.
Hi
try app called WMWifiRouter - http://www.wmwifirouter.com/ . I've just heard of it, don't know actualy if it can work via USB or just BT...
Firefall! said:
Yes there is.
Click to expand...
Click to collapse
omg.. LOL
Firefall! said:
Yes there is.
Click to expand...
Click to collapse
Could you tell me how?
screamor said:
Could you tell me how?
Click to expand...
Click to collapse
look one post above
Firefall! said:
Yes there is.
Click to expand...
Click to collapse
Indeed .
Search for XDA-Tom_Codon CM Wifi Internet Sharing VGA.cab this is free.
Edit: Actually having just re read the original post I think the original question is different.
If you want to use it as a wireless access point the see above if, as I beleive you don't have a wireless card and want to connect to the internet over usb then the answer is even simpler.
Start >> Programs >> Internet Sharing.
THx for your answers...
So however if i try to share the wifi from the phone to the Pc, how i do it??
If i try to make an internetsharing via Start >> Programs >> Internet Sharing, there are only the gprs and gsm connections. I cant choose wlan.
regards screamor
Not sure if it works this way, if it does, make sure you have WLAN turned on and you're connected to the network with your phone. THEN open internet sharing. If still not available, you will need Wm Wifirouter as mentioned in the 2nd reply.