Database Develop

Himalaya WM6 all problem heer

1-ActiveSync with bluetooth in xp and Vista
2-GPRS
3-battery (fix with registry edit)

2)
yep if you read people main issue with this rom it's that grps dont work
not just a problem for you but for everybody with wm6 for himalaya
hopefully it will be fixed

I am having two major issues:
1. GPRS
2. Sync ActiveSync with Bluetooth
I hope these gr8 ppl here on the forum would solve this v.soom!!!!

taim99 said:
I am having two major issues:
1. GPRS
2. Sync ActiveSync with Bluetooth
I hope these gr8 ppl here on the forum would solve this v.soom!!!!
Click to expand...
Click to collapse
Me tooo.i cant connect to ActiveSync VIa Bluetoth..How much i miss it !!

AutoSuggest is not working with me

kkamel said:
AutoSuggest is not working with me
Click to expand...
Click to collapse
me toO! after changing values on registry, nothing happens.
Another problem... Can not use slide 2 unlock properly with the use of slide to answer. after you have encounter the error, default caller ID doesn't show anymore, just answer and ignore buttons only.

hmmm... what slider?
I cannot see any slider on my Hima

Do any one managed on making an internet Pass Through from the PC to the Device? If not you can add it to the bug list of the Himalaya WM6.
We also need to Organize the Bug list, may be as follows:
1 - GPRS & MMS not working.
2 - AutoSuggest not working.
3 - Internet Pass Through.
4 - ActiveSync via Bluetooth
I would also suggest that while adding a new bug to the list to confirm the listed bugs in order we could all know it not a personal or single user problem and at the same time we try to help him.

utak3r said:
hmmm... what slider?
I cannot see any slider on my Hima
Click to expand...
Click to collapse
of course you have to install slide2unlock by A_C

when receiving a call, the phone wakes up after 10 seconds.

nesty24 said:
when receiving a call, the phone wakes up after 10 seconds.
Click to expand...
Click to collapse
What radio do you have?
Mine is waking up immediately.

kkamel said:
Do any one managed on making an internet Pass Through from the PC to the Device? If not you can add it to the bug list of the Himalaya WM6.
Click to expand...
Click to collapse
Works perfect for me

utak3r said:
Works perfect for me
Click to expand...
Click to collapse
What was your steps to configure it?
Thanks,

utak3r said:
What radio do you have?
Mine is waking up immediately.
Click to expand...
Click to collapse
radio version 1.17

kkamel said:
What was your steps to configure it?
Thanks,
Click to expand...
Click to collapse
The only thing is to check that you have turned it on in ActiveSync on PC...

nesty24 said:
radio version 1.17
Click to expand...
Click to collapse
Hm, as for now I have 1.19, as I was flashing all the radios I have (beginning with 1.08 one), while fighting with gprs.
Maybe you have some strange or incompatible ringer set? Hmm.

Internet through PC on PPC
kkamel said:
Do any one managed on making an internet Pass Through from the PC to the Device? If not you can add it to the bug list of the Himalaya WM6.
We also need to Organize the Bug list, may be as follows:
1 - GPRS & MMS not working.
2 - AutoSuggest not working.
3 - Internet Pass Through.
4 - ActiveSync via Bluetooth
I would also suggest that while adding a new bug to the list to confirm the listed bugs in order we could all know it not a personal or single user problem and at the same time we try to help him.
Click to expand...
Click to collapse
Have u read the Readme before installing the rom..it says to ENABLE USB CONNECTIONS..i chat..am posting..and surf internt on ma ppc using ma broadband connection of pc...

ather90 said:
ENABLE USB CONNECTIONS
Click to expand...
Click to collapse
oh yeah... I've forgot to say this... but it was obvious to me
I wonder... what if one released some rom xored... and put a readme file with it that you have to xor it again before flashing it... how many people would land in bootloader?...
It's horrible.

lolz... yeah it is

Is there any1 besides me who is having problems syncing WM6 Himalaya with Windows Vista over USB Cradle/Cable too??

Active sync 4.5.0 and Internet

Hey everyone I am really curious about how I need to go about accesing the internet throung the usb connection while my tilt is plugged in. I have read that previous versions of active sync had a feature called pass through which could be enabled / disabled at your choice. However in the current version of active sync this does not seem to be an option.
I basically just want to be able to browse the net on my tilt while I am connected to the pc via my usb cable.
Why because the at home internet connect is way better then the 3g network. This way I can download large files directly to my phone.
I have tried the registry edit as well as other methods. Still can't get the damn thing to work..
I am running the stock tilt rom directly from att. No mods no nothing. Also the version of active sync that I have came directly off the att tilt cd.
Please Help I appreciate your efforts in advance!

I have this workaround ( same situation with my X51V ) that you can try.
import the reg file or add the following key:
Code:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services]
"AllowLSP"=dword:00000000
Most works out of the box ( internet while activesync ... not sure why yours don't ... could be something that you did ??
anyway ... try the reg import and report back

I didn't do anything on mine and it is able to connect to internet through the USB whenever I connect it. WiFi is disable when the USB is connected.

earthman5678 said:
I didn't do anything on mine and it is able to connect to internet through the USB whenever I connect it. WiFi is disable when the USB is connected.
Click to expand...
Click to collapse
when setting up activesync ... the last window allow you to enable WIFI while connected to USB too ( if prefered )
or go into ( File -->> Connection Settings ) and check "allow wireless connection on device while connected to desktop"

yeah tried the reg hack before. didn't change anything for me.
I also messed with the advanced network functionality box under start settings> connections> USB to PC.
No worky for me.
Is there anything else you guys have done on the phone? Should there be any other entries under network management? RIght now I have listed
Media Net
AT&T ISP
My Work Network
MY ISP

If you haven't MOD anything like you've said ... I would suggest a hard reset ... and don't touch that USB to PC setting !!!
things should allow you to surf while activesync right out of the box !

UnicornKaz said:
If you haven't MOD anything like you've said ... I would suggest a hard reset ... and don't touch that USB to PC setting !!!
things should allow you to surf while activesync right out of the box !
Click to expand...
Click to collapse
for real OH Jebus Hard reset. Just great. Well atleast i don't have too much on my phone.
Any other suggestions?

In your PC ACtiveSYnc' connection settings, you will have a drop-down under name "This computer is connected to". Take out Automatic there and choose Internet.
Sometimes ActiveSync will not recognize that your PC has internet. Tell me if this was it in your case.
Regards,
Carty..

Carty said:
In your PC ACtiveSYnc' connection settings, you will have a drop-down under name "This computer is connected to". Take out Automatic there and choose Internet.
Sometimes ActiveSync will not recognize that your PC has internet. Tell me if this was it in your case.
Regards,
Carty..
Click to expand...
Click to collapse
yeah my man did that as well... maybe I will try the hard reset and see what happens

ive been curious about this also. mine just seems to default to my 3g connection...do i have to disable this for it to use the active sync connection?

Nope. When Synced, ActiveSync' net is on first priority!
Regards,
Carty..

I wonder if you have the networks proxy set in your default internet connection and when you connect via as it cant see the proxy nd thus wont allow connection...

interesting i tried out the newest rom on kaiser upgrade section...the att rom. i was gettin the same behavior. i loved the rom but was only bugged by that. i went to a new rom and fixed that problem. something with how att handles activesync cant do the job.

And ATT use a proxy...

unwired4 said:
And ATT use a proxy...
Click to expand...
Click to collapse
i tried the diasable proxy cab flying around...it was no good. I'm using a different rom right now. It only happened to me on that specific rom.

I would have thought you just need to check the connection settings and make sure no proxy is enabled.

regarding the Tilt and the proxy ... you could try out these 2 cabs at this thread ( 1 for disable ... the other is for enable )
look towards the end of the post ..."Sleuth255" had provided the cabs for you Tilt owners to fix the hidden proxy that is involved with AT&T Tilt
http://forum.xda-developers.com/showpost.php?p=1656670&postcount=1
if it works ... holler so that other Tilt owners can benefit !

UnicornKaz said:
regarding the Tilt and the proxy ... you could try out these 2 cabs at this thread ( 1 for disable ... the other is for enable )
look towards the end of the post ..."Sleuth255" had provided the cabs for you Tilt owners to fix the hidden proxy that is involved with AT&T Tilt
http://forum.xda-developers.com/showpost.php?p=1656670&postcount=1
if it works ... holler so that other Tilt owners can benefit !
Click to expand...
Click to collapse
Nice I downloaded the cabs. But before I launched them I took a look at my tilt for another second.
Keep in mind that I just did a hard reset and this is a stock att ship ROM.
Under start> Programs>Tools> There is a icon called proxy manager.
I clicked on diable proxy and did a soft reset. The problem is now fixed. I can browse the net while connected via usb through pass Thru.
Maybe the cabs do not need to be downloaded afterall as att already has them installed but thank you for the lifesaver!
Thanks people!

Hi,
I also used proxy manager to disable the proxy. Now whenever i connect my phone with activesync, it keeps connecting to the phone's GPRS (mediaNet). i look under the connections icon and it shows medianet connected, but not activesync.
anyone know how i can fix this to return to normal? i tried enabling the proxy again, but no luck.

HI,
I think I need the opposite
At work there is a very restrictive proxy that allows pie connections but, for example, does not allow to update the weather in HTC HOME.
There is a WIFI nearby that allows it...
Now, what I would like is to have my device ActiveSync'ed (so contacts, and so on are OK) while using WIFI for ineternet access...
Anyone knows if it is possible and how?
Thanks

Tilt 8925 Connect to WLAN

hi,
Can someone tell me how to connect to WLAN ?
the connection disconnect every few seconds, why ?
thnx

Maybe you used wrong settings, you are (nearly) out of range or the accesspoint uses a MAC-Filter.

How can i get online on my Laptop
with the help of My Phone At&t Tilt ?
is there a cab for it ? or ?
Please Help

ilordvader said:
How can i get online on my Laptop
with the help of My Phone At&t Tilt ?
is there a cab for it ? or ?
Please Help
Click to expand...
Click to collapse
Use Internet Sharing via USB or Bluetooth if you laptop supports it. Works great. No need for cabs or anything. You may need Active Sync installed on your laptop (can't remember since I have it installed anyway).

ecltech said:
Use Internet Sharing via USB or Bluetooth if you laptop supports it. Works great. No need for cabs or anything. You may need Active Sync installed on your laptop (can't remember since I have it installed anyway).
Click to expand...
Click to collapse
what ecltech said. And YES you need activesync installed or else your pc won't realize your device and ask you to add new hardware. With activesync it updates the usb drivers to recognize that you are connecting your device and sharing its internet.
Haven't tried the Bluetooth way yes so I wouldn't have an answer for that one.

ecltech said:
Use Internet Sharing via USB or Bluetooth if you laptop supports it. Works great. No need for cabs or anything. You may need Active Sync installed on your laptop (can't remember since I have it installed anyway).
Click to expand...
Click to collapse
Thxs ill try it

Bluetooth works fine. When you configure the Bluetooth on your laptop use advance configuration so you can use the WAP setting. Otherwise it defaults to the modem and asks you for dial settings/etc.

ilordvader said:
How can i get online on my Laptop
with the help of My Phone At&t Tilt ?
is there a cab for it ? or ?
Please Help
Click to expand...
Click to collapse
Couldnt do it
Can anyone give me step by step instructions
PLEASE

Active Sync doesnt work after upgrade

Hi !!!
The issue looks like this that i upgraded my PDa to WM5, everything is working it was latest HElmi ROM . BT Wifi GPS GSM everything is great , working very fast, upgrade took me 20 min and a bottle of vine . But after upgrade i cannot sync to PC , i uninstalled sync installed one more time didnt help. I have 4.5 version of sync.
Please help me !!!
I really need to sync i have to install my GPS maps and without sync is imposible

When you have upgraded your PDA you will have to set up a new partnership in Active Sync. To do this you disconnect your PDA, open up Active Sync and then in menu File -> Delete mobile device.
Then when you reconnect Activesync should recognize it as a new device and you can setup synchronisation.
Good luck

not really, i already reinstalled the connection, i used it before so im familiar with that , but thx for trying. I sure that this is combined with that upgrade to WM5 it was working fine on 2003SE

You know what ?? i notice that when im plug in the PPC its creates a LAN connection on my computer and try to acquire IP , cant connect active sync error cant connect and on a PPC error cannot acquire the IP ... if i remember right i never had a connection , LAN connection before i installed that WM5 ... i tried disabling firewall, antyvirus , disable my internet ( its a USB modem ), im even ready to reinstall the whole windows if i have to ...... help guys !!!!

Two things to try:
Set the IP as static in the RNDIS-Adaptor (I don't have my angel handy to tell the settings)
Disable the Advance Network Functionality. (Start -> Settings -> Connections tab -> USB to PC)
Really, I'm not even sure what the RNDIS (advanced network settings) are even good for. I've not seen any less network related functionality with it disabled.

thx man... i will try in about 1 h , im at work right now, i set to class C 192.168.0.1 maybe it will work
thx a lot hopefully this will be the last post

and .... it wont work.... i getting confused..... damn SYNC

Kazador said:
and .... it wont work.... i getting confused..... damn SYNC
Click to expand...
Click to collapse
No, a class C won't work.
I just plugged in my hermes using the 'Advanced Network Functionality' and it showed an IP of 169.254.2.2. If you want to try wth that IP with the remote-NDIS host 'network card' (I think that's the one to change), go for it.
Really, I'd just disable the advanced network crap and be done wth it. Activesync is such a hack IMO, it's not worth the headache.

Yo Bro!!
Kazador said:
and .... it wont work.... i getting confused..... damn SYNC
Click to expand...
Click to collapse
Well the i just guessing the simplie thing.. Since u say u upgraded to WM5 i guess u upgrade your BA from WM 2003 to WM5?
if that true.. then u only need to change your Active Sync 4.1 to Active Sync 4.5..
WM5 n WM6 works only with Active Sync 4.5 bro!!
u can download it from here:
http://www.microsoft.com/windowsmobile/activesync/activesync45.mspx
happy trying..!!

its already on 4.5 dude .... and the IP 169.254.X.X its the self assigned IP address by the card , i normal circumstances it means on network that there is limited or no connectivity , but what have left ??? i will try ...wish me luck

Kazador said:
its already on 4.5 dude .... and the IP 169.254.X.X its the self assigned IP address by the card , i normal circumstances it means on network that there is limited or no connectivity , but what have left ??? i will try ...wish me luck
Click to expand...
Click to collapse
Yes, I am quite aware of the IP and it's use, however, that is the IP range that activesync uses.
Remember, activesync acts like a NAT or bridge between the phone and the network(s) the computer is attached to.
I think it was the hermes forum that someone tried assigning the IP manually and it worked for them.

nope, it will not work, now the LAn connection created by the phone gives limited connectivity , on auto IP assigning its saying connected on the IP 169.254.2.2 , i can see recived and send send packets but the SYNC after 1 min of "connecting" timed out and says cannot connect.... its weird that its sending/receiving and SYNC is ****ed up....

HAHAHAHAH !!!!! 2 bottles of vine , 1 beer, 2 packs of cigarettes... if done IT !!!!!! you whant to know how ?????

Well Then..
Kazador said:
its already on 4.5 dude .... and the IP 169.254.X.X its the self assigned IP address by the card , i normal circumstances it means on network that there is limited or no connectivity , but what have left ??? i will try ...wish me luck
Click to expand...
Click to collapse
Well..
- Async for the WM2003SE is Async 4.1
- Async for the Wm 5 & 6 is Async 4.5 won't work if us 4.1
since u have uninstaled the 4.1 and instaled the 4.5..
this is my ultimate opinion for u..
1. try to sync your BA to ur any friends PC which has not been instaled by Async => then instal tha Async4.5 to your friends PC n connect it via USB, then lets see what happen..?
2. try to Sync Your BA with any of ur friends PS which has Windows Vista.. it has built in Window Mobile Device Center.. n see if ur device can connect n sync with your friends's Vista?
3. if the 2 options in above doesn't work too.. it means your WM5 have some trouble in active sync bro(maybe).. then all u have to do just Re-Upgrade it..
maybe u should try WM6 ROm 6.10.00 made by Explode.. i have it instaled on my BA.. it it works wonderfuly n fast! n the Asnyc normal too.. since i have my BA being custumized from WM2003 to WM5, From WM5 toWM6(5.60.00), From WM6(5.60.00) to WM6(6.10.00) "I Never Changed my Local Area Connection to my device" i'm not even touch that area after all..
after i read your tread i try to see my Internet Protocol Settings(propeties) n it was Setted to Receive IP Automaticly..!
have i nice try bro!!
Glad to help You There.. Hope u solve the problem soon.. God Bless U

Kazador said:
HAHAHAHAH !!!!! 2 bottles of vine , 1 beer, 2 packs of cigarettes... if done IT !!!!!! you whant to know how ?????
Click to expand...
Click to collapse
Sure, what was the fix?

hard reset didn't help, try it several times... I reinstalled the sync ..didn't help ... I chrck if it work on boot loader it find him ... well I did reinstall the ROM using reset holding camera+record, select 3 option button mail.. windows reinstall ..and ladys&gentelmen we got fully funcionall BA ... everything just works perfect and fast... I installed my GPS,wi-fi works goog, phone Ok. The only thing that doesn't work is stereo headset bluetooth hhd-750 siemens ...I can discover but can't sync with phone

I can sync but NOT ALL things sync - i have posted elsewhere in xda-developers but I am VERY confuised.
Only SOME of my calender and SOME of my inbox sync. I am on PDAviet's rom (I tried xplodes but same issue), I use activesync 4.5 and office 2007 on my PC.
The only thing I haven't tried is re-installin outlook 2007. Is there anything else I can try - I REALLY NEED TO SYNC MY CALENDER (and other items)
Thanks!

knight4success said:
I can sync but NOT ALL things sync - i have posted elsewhere in xda-developers but I am VERY confuised.
Only SOME of my calender and SOME of my inbox sync. I am on PDAviet's rom (I tried xplodes but same issue), I use activesync 4.5 and office 2007 on my PC.
The only thing I haven't tried is re-installin outlook 2007. Is there anything else I can try - I REALLY NEED TO SYNC MY CALENDER (and other items)
Thanks!
Click to expand...
Click to collapse
What errors are you getting?
Also, have you tried deleting your activesync pairing and recreating it?

jdc said:
What errors are you getting?
Also, have you tried deleting your activesync pairing and recreating it?
Click to expand...
Click to collapse
I'm not getting any errors - it just only syncs some items and not others - why I can't figure out.
I have deleted and add numerous times - no difference. very very confusing ???

Kazador said:
Hi !!!
The issue looks like this that i upgraded my PDa to WM5, everything is working it was latest HElmi ROM . BT Wifi GPS GSM everything is great , working very fast, upgrade took me 20 min and a bottle of vine . But after upgrade i cannot sync to PC , i uninstalled sync installed one more time didnt help. I have 4.5 version of sync.
Please help me !!!
I really need to sync i have to install my GPS maps and without sync is imposible
Click to expand...
Click to collapse
Are you using Vista or XP. If it's XP, you have to go into Settings=> Connections => USB to PC => check "Enable advanced network functionality"
In Vista, it needs to be unchecked. The problem is when you do this, ActiveSync in your PDA should have an option to connect via USB but it doesn't. I now cannot sync in Vista except by using bluetooth. I remember after buying the HTC Touch Cruise that you need the "Getting Started" installation CD to install the USB driver. I have since returned the Cruise and am back to my Siemens SX66.

Internet while connected to Activesync..

Hi all,
I am on Dutty's apr-29 rom and here is my issue..
My kaiser is connected to my work pc with activesync installed and i am unable to use internet on my device... I can update htc weather with no worries but the pie and skyfire doesn't work... the strange thing is that netfront browser works just fine so iam not sure if its a proxy issue or not???
I would like to use skyfire if possible so pls let me know what can i do to make it work.
Thanks alot

First thing I'd try is to reboot the computer AND soft reset the phone. If that doesnt work, try disabling advanced network... under connections usb to pc.
ps- in the future, its recommended NOT to start a new thread for something like this, but post it in the rom's thread (duttys in your case)

hi, i have the same problem...but I still using the standard ATT rom...

ajmoncrief said:
First thing I'd try is to reboot the computer AND soft reset the phone. If that doesnt work, try disabling advanced network... under connections usb to pc.
ps- in the future, its recommended NOT to start a new thread for something like this, but post it in the rom's thread (duttys in your case)
Click to expand...
Click to collapse
Hi,
Thanks for the quick reply, I tried what you suggested but still no luck..

I honestly don't know...the fact that you are able to update the weather but not others has me stumped. Has it always behaved this way? Can you do a complete system backup using sprite and hard resest, before you restore, connect it to activesync (you do not need to configure it to sync with your device, iow just cancel the first screen) and see if you can use pie or check your email. If you can then there must be a problem with your settings somewhere, but if you cant then just use sprite for a full system restore and you should be back to where you were and maybe someone else can help.
For what its worth when I first got my tilt it would not use the internet no matter which way I tried (ota or activesync). Then it magically just started working.

hello once again,
Ok so here is the thing... i played around with it a bit more and was able to get pie to work.. but everything else still doesn't work (windows live, skyfire, etc..)
I went to connections>>advanced>>select network>> on this screen i selected "My ISP" for the top menu and "My Work Network" for the bottom menu... By making this change pie is now working but still no luck with skyfire..
Note: i do not have a data plan so MY ISP menu is empty, i usually use skyfire with wifi or when connected to my laptop at home
PS: I didn't do a hard reset because i dont think it has anything to do with rom upgrade...i have flashed my device like 47 times in last 2 months and have had the same issue with every rom i've tried including the original htc rom. Everything works jsut fine when when my device is connected to my laptop at home using activesync.

I think you would still have the problem after a hard reset. Mine has the problem now on the standard Tilt ROM. The wierd part is it didnt when I first set it up and was running the internet through cerdisp. I guess I need to look into it too, but I havent been going crazy trying to find it.
What version of activesync are you using?

Iam using Activesync 4.5..

Have you tried disabling your windows firewall?

Dumb Question
If the phone is connected to your work PC, why would you use the browser on the phone and not the work computer?
If you are worried about what the boss might see - here's the problem with that - can't they just monitor the server traffic anyway, whether you use the phone or the computer, since you would be using the work's server?
What i do at work - first make sure there are no keyboard loggers - second use the internet on the phone and disable the ethernet on the computer.
I remember an option somewhere in the syncing process about allowing income data connections - I dont know exactly what it does, but i will try to find it and post something
EDIT - it was an option to allow wireless incoming data to phone while connected to activesync.

If your talking about tethering, then you're doing it wrong.
Make sure your Activesync isn't connecting to your phone in the first place. Turn off the "USB" connect in the settings for Activesync.
THen go on your phone and open up the "windows" and look for a file called "intshr" or something like that. Open it up and then hit connect.
You don't need to change any settings for the Media Net if you're using the AT&T rom.

larcen007 said:
If the phone is connected to your work PC, why would you use the browser on the phone and not the work computer?
If you are worried about what the boss might see - here's the problem with that - can't they just monitor the server traffic anyway, whether you use the phone or the computer, since you would be using the work's server?
What i do at work - first make sure there are no keyboard loggers - second use the internet on the phone and disable the ethernet on the computer.
I remember an option somewhere in the syncing process about allowing income data connections - I dont know exactly what it does, but i will try to find it and post something
EDIT - it was an option to allow wireless incoming data to phone while connected to activesync.
Click to expand...
Click to collapse
Well the only reason i wanna use my device and not the work pc is beacuse all the major sites like hotmail, youtube, facebook are blocked but they all work on my device using "only" netfront browser..
Cheers

Xyberz said:
If your talking about tethering, then you're doing it wrong.
Make sure your Activesync isn't connecting to your phone in the first place. Turn off the "USB" connect in the settings for Activesync.
THen go on your phone and open up the "windows" and look for a file called "intshr" or something like that. Open it up and then hit connect.
You don't need to change any settings for the Media Net if you're using the AT&T rom.
Click to expand...
Click to collapse
Thanks Bud,
will give it a go and report back...
PS: i just noticed that windows firewall is enabled and i dont have access to disable it :-(

you must edit the registry
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services]
"AllowLSP"=dword:00000000

ld-runner said:
you must edit the registry
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services]
"AllowLSP"=dword:00000000
Click to expand...
Click to collapse
I am creating a new key under: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services
Called AllowLSP ??
Cheers

farhanali_ said:
I am creating a new key under: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services
Called AllowLSP ??
Cheers
Click to expand...
Click to collapse
yes, or you could just copy and paste my post into a file with and extension called .reg , save it and double click on it.