Hello,
I flashed my trinity with the dopod GPS enabled rom, everything works well, but when i dial 119 (TIM customer care number) the phone connects me to the emergency number 112 (italian carabinieri), and it writes "emergency" near the number, which doesn't happen when i dial a proper emergency number in Italy (112 or 113)
Any solutions?
Thanks a lot,
GM
gmanca said:
Hello,
I flashed my trinity with the dopod GPS enabled rom, everything works well, but when i dial 119 (TIM customer care number) the phone connects me to the emergency number 112 (italian carabinieri), and it writes "emergency" near the number, which doesn't happen when i dial a proper emergency number in Italy (112 or 113)
Any solutions?
Thanks a lot,
GM
Click to expand...
Click to collapse
Do not panic it is only a registry edit and you add or remove anything you whant.
Use one registry editor (ex. resco) search the number 119 and remove it or add the number you whant.
So simple.
ausdim said:
Do not panic it is only a registry edit and you add or remove anything you whant.
Use one registry editor (ex. resco) search the number 119 and remove it or add the number you whant.
So simple.
Click to expand...
Click to collapse
Thanks for your reply: I tried to modify the registry list (under Security\Ecall): replaced 119 with 113, but when i restart the phone the list goes back to the original values...
Am I doing something wrong??
Thanks Again,
GM
gmanca said:
Thanks for your reply: I tried to modify the registry list (under Security\Ecall): replaced 119 with 113, but when i restart the phone the list goes back to the original values...
Am I doing something wrong??
Thanks Again,
GM
Click to expand...
Click to collapse
Search again and delete it.
HLM\SOFTWARE\OEM\RIL\
HLM\SECURITY\ECALL\
I try only to add some numbers and work's.
Try it,but do it in all multi line values.
ausdim said:
Search again and delete it.
HLM\SOFTWARE\OEM\RIL\
HLM\SECURITY\ECALL\
I try only to add some numbers and work's.
Try it,but do it in all multi line values.
Click to expand...
Click to collapse
OK! It works!
Thanks a lot!
GM
Related
Hello...
How can i stop the imei change when i update the radio.nb??
I mean the last two digit's going up after an radio update.
Like ****************02
And you can see the change only with *#06#
Is there any away to keep it down???
Thank's
ausdim said:
Hello...
How can i stop the imei change when i update the radio.nb??
I mean the last two digit's going up after an radio update.
Like ****************02
And you can see the change only with *#06#
Is there any away to keep it down???
Thank's
Click to expand...
Click to collapse
those are an extra two digits, the actual IMEI is no different
Olipro said:
those are an extra two digits, the actual IMEI is no different
Click to expand...
Click to collapse
Yes i know but how can stay down those digit's??
It is any away to do that?....
Thank's for the answer at all..
ausdim said:
Yes i know but how can stay down those digit's??
It is any away to do that?....
Thank's for the answer at all..
Click to expand...
Click to collapse
Same problem for me
IMEI change
What radio firmware did you put on? It may be the checksum changed.
May sound a bit of the topic but it is not. Is there a way to change the IMEI on p3600? I have seen some tools but they dont work on p3600.
And please spare me of legal issues on this.
Thanks
yeah, radio rom changed it, i put back the oldone and everything is fine.
I also remember a tool (for XDA2), that was able to change the IMEI.
If you on about awizard and iwizard - they dont work on Trinity....unless somebody can confirm otherwise..
Does anyone know where can I obtain the RIL driver source code?
Hello, I am using Elite 2.0
I try to edit registry and used Advanced Configuration Tool to edit it, but also not works....
Anyone can help me??
thanks!
kayzee said:
Hello, I am using Elite 2.0
I try to edit registry and used Advanced Configuration Tool to edit it, but also not works....
Anyone can help me??
thanks!
Click to expand...
Click to collapse
Hide SIM Contacts: HKCU\ControlPanel\Phone - create a new DWORD value named "ShowSim" and set it to 0
from here.http://http://forum.xda-developers.com/showthread.php?t=398265
hi25man said:
Hide SIM Contacts: HKCU\ControlPanel\Phone - create a new DWORD value named "ShowSim" and set it to 0
from here.http://http://forum.xda-developers.com/showthread.php?t=398265
Click to expand...
Click to collapse
I did it already, but after soft reset, not works........
WHY!!!??
Try to do a search - this subject has been already discussed at length...
pedmond said:
Try to do a search - this subject has been already discussed at length...
Click to expand...
Click to collapse
I did it..I type sim contact to search, but couldn't find any solution...
Or I should use another key word??
kayzee said:
I did it..I type sim contact to search, but couldn't find any solution...
Or I should use another key word??
Click to expand...
Click to collapse
Try this:
http://forum.xda-developers.com/showthread.php?t=398265&page=32
and following pages.
It's the current status of your problem.
Which is the best app to go for to tweak window mobile registry plz? also is there somewhere on this site that has apps to d/l? cheers
I use TotalCommander...
Easy to use and i great filemanager too
http://www.ghisler.com/pocketpc.htm
I've now got that program installed on the diamond but how on earth do I tweak the reg? I want to follow this guide but I don't know where to start with this!
8. Prevent screen switching off during phone call --> HKEY_Local_Machine\Drivers\BuiltIn\RIL\EnableFastD ormantDisplayDuringCall to 0 (Note: does not work on all ROMs)
AND (tested and works on EU ROMs thanks to Rod65)
HKCU\ControlPanel\Phone\Sleep switch value from 1 to 0
Double click on '\\Plugin' then on 'registry'
now you can go wherever you want in the registry...
to edit a value just double click and change
EDIT:
If It's the screen off during calls reg tweak then this worked for me... ( can't remember where I found it?? but it's in the forum somewhere)
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\RIL]
"BatteryTimeoutInCall"=dword:20
"BattSuspendTimeoutInCall"=dword:20
"EnableFastDormantDisplayDuringCall"=dword:1
[HKEY_CURRENT_USER\ControlPanel\Phone]
"Sleep"=dword:1
[HKEY_CURRENT_USER\ControlPanel\BackLight]
"LightSensorPollingEnable"=dword:1
This gives me 20 seconds of screen time before it goes out. You can change 20 to any number you want.
I can,t see //plugin, i have a list of other folders but not one called plugin.
sony007 said:
I can,t see //plugin, i have a list of other folders but not one called plugin.
Click to expand...
Click to collapse
Hmmm... ok? and you are att the 'root'?
because at the top I have //Plugin
This is how my TotalCommander looks like... ( It's in Swedish )
Does there really need to be this many threads on this question? Please use the search before asking.
Use CeRegEditor and you can edit the registy remotly from youre PC
I've managed to get a snapshot of my phone and I think it's the root directory but no //plugin
sony007 said:
I've managed to get a snapshot of my phone and I think it's the root directory but no //plugin
Click to expand...
Click to collapse
Ok, I managed to get it like u 2... just use a singel '\' instead of '//\' at the top...
hope it helps
No joy, no worry m8. Thanx for trying to help!
sony007 said:
No joy, no worry m8. Thanx for trying to help!
Click to expand...
Click to collapse
No... you still have it like '/\' .... just the '\'
finally I got it right cheers m8 much appreciated
After u used total commander...
PHMregedit, very good, very easy in use. try it
So I'm unlocked and using pretty much everything but AT&T. Is there a way to allow stock tethering functionality on our device?
I already tried getting rid of TetheringGuard.apk/odex and ATT_Hotspot.apk/odex, borrowing hacked telephony.db from http://forum.xda-developers.com/showthread.php?t=1677261, and editing build.prop with this:
ro.wifi.hotspotUI=1
ro.usb.tetheringUI=1
ro.tether.denied=false
No go.
PdtS said:
So I'm unlocked and using pretty much everything but AT&T. Is there a way to allow stock tethering functionality on our device?
I already tried getting rid of TetheringGuard.apk/odex and ATT_Hotspot.apk/odex, borrowing hacked telephony.db from http://forum.xda-developers.com/showthread.php?t=1677261, and editing build.prop with this:
ro.wifi.hotspotUI=1
ro.usb.tetheringUI=1
ro.tether.denied=false
No go.
Click to expand...
Click to collapse
I was able to do it through settings without any mods.
Hey James! Was it on your Sense rom? 'Cause I haven't flashed it yet
PdtS said:
Hey James! Was it on your Sense rom? 'Cause I haven't flashed it yet
Click to expand...
Click to collapse
Nah the stock Rom. I will reflash to confirm but I'm pretty sure it just worked
Sent from my HTC first using xda premium
This is what I'm getting every time. Notice how this message is in Sense framework for some reason.
PdtS said:
This is what I'm getting every time. Notice how this message is in Sense framework for some reason.
Click to expand...
Click to collapse
On stock rom? I guess it goes to show how crappy they build this rom
Sent from my HTC first using xda premium
Any updates? I'm on the road can't download it ruu rooted stock roms running mms sense...
Tried deleting tetheringguard.apk no go. Will delete wifirouter.apk and try...
I'm facing the same problem. Could anybody tell us how to troubleshoot this??
After being back on stock ROM I must have been mistaken on my earlier comment. I will look into it once I can some free time
jmz said:
After being back on stock ROM I must have been mistaken on my earlier comment. I will look into it once I can some free time
Click to expand...
Click to collapse
Thank you, JMZ. A particularly (ocassionally) useful feature, especially when using a Straight Talk AT&T SIM. (Only 4 hours till my phone arrives!!) --Larry
Hello JMZ, I'm having same problem. I can't start my wifi hotspot. I don't know how to root my device. This is my first android device. Is it necessary to root my device to use my wifi hotspot. How do i check my ROM type (You guys mentiones STOCK and SENCE ROMS here).
Please help me on this.
Thanks in advance.
Solved
jmz said:
After being back on stock ROM I must have been mistaken on my earlier comment. I will look into it once I can some free time
Click to expand...
Click to collapse
Thanks to diekastro's post #8 at the XDA HTC One X Forum, I found this allowed me to activate a wireless hotspot and eliminated the AT&T check, using SQLite editor.
-- albeit not for the faint of heart:
Make a backup of telephony.db (in case this doesn't work for you)
Your internet APN should be configured (Settings - Mobile data - Access Point names)
1)Open Telephony.db (flange files: data/data/com.android.providers.telephony/databases)
2)Select 'carriers'
3)Search second row, then select Edit field
4)Change ID field with a number non used in this db (ex: in my case the last row is "37" so I used "38") - Save
5)Repeat the 3 and 4 steps, but using row 12.
6)Search the last line (or line with your carrier internet APN)
7)Select the row and Edit Field.
8)Change the ID field to "2". - Save
9)Chose the second row, then Clone Record and change ID field to '12' - Save
Now just need to make changes on the newly created lines:
Row number 2 -> Edit field
1)Change name to ATT Phone
2)Change Type to "default"
2)Insert_by field to "internal".
3)State to "readonly"
Row number 12 -> Edit field
1)Change name to Entiltlement
2)Change Type to "entitle"
2)Insert_by field to "internal".
3)State to "hidden"
My phone: HTC First, rooted and s-off. Stock rom w/ JMZ Kernel. Straight Talk SIM (AT&T network)
--Good luck
amphi66 said:
Thanks to diekastro's post #8 at the XDA HTC One X Forum, I found this allowed me to activate a wireless hotspot and eliminated the AT&T check, using SQLite editor.
-- albeit not for the faint of heart:
Make a backup of telephony.db (in case this doesn't work for you)
Your internet APN should be configured (Settings - Mobile data - Access Point names)
1)Open Telephony.db (flange files: data/data/com.android.providers.telephony/databases)
2)Select 'carriers'
3)Search second row, then select Edit field
4)Change ID field with a number non used in this db (ex: in my case the last row is "37" so I used "38") - Save
5)Repeat the 3 and 4 steps, but using row 12.
6)Search the last line (or line with your carrier internet APN)
7)Select the row and Edit Field.
8)Change the ID field to "2". - Save
9)Chose the second row, then Clone Record and change ID field to '12' - Save
Now just need to make changes on the newly created lines:
Row number 2 -> Edit field
1)Change name to ATT Phone
2)Change Type to "default"
2)Insert_by field to "internal".
3)State to "readonly"
Row number 12 -> Edit field
1)Change name to Entiltlement
2)Change Type to "entitle"
2)Insert_by field to "internal".
3)State to "hidden"
My phone: HTC First, rooted and s-off. Stock rom w/ JMZ Kernel. Straight Talk SIM (AT&T network)
--Good luck
Click to expand...
Click to collapse
do you mind pulling that file and uploading here?
jmz said:
do you mind pulling that file and uploading here?
Click to expand...
Click to collapse
My file is specific to a ST SIM (mvno). Could that cause confusion?
BTW, your work has been invaluable -- Thank you!
amphi66 said:
My file is specific to a ST SIM (mvno). Could that cause confusion?
BTW, your work has been invaluable -- Thank you!
Click to expand...
Click to collapse
Yeah maybe. Can you clarify which one is suppose to be copied to slot 2? Cause the way I read it I just copy 38(which was in slot 2) back to slot 2 and the clone that one to 12. Maybe it has just been a long day....
Sent from my manta using Tapatalk 2
jmz said:
Yeah maybe. Can you clarify which one is suppose to be copied to slot 2? Cause the way I read it I just copy 38(which was in slot 2) back to slot 2 and the clone that one to 12. Maybe it has just been a long day....
Sent from my manta using Tapatalk 2
Click to expand...
Click to collapse
That could be confusing & it is now easy to forget what I did, but it probably should read: 'search the "original" last line (or line with your internet carrier APN)' -- in my example it was line 37 renumbered to 2.
Basically the script just resets the database and subsitutes our actual APN & settings for the default AT&T values, so there is no conflict.
amphi66 said:
That could be confusing & it is now easy to forget what I did, but it probably should read: 'search the "original" last line (or line with your internet carrier APN)' -- in my example it was line 37 renumbered to 2.
Basically the script just resets the database and subsitutes our actual APN & settings for the default AT&T values, so there is no conflict.
Click to expand...
Click to collapse
@jmz: I sent you a PM last night with my telephony.db (after mod). Hope that helped! --Larry
amphi66 said:
@jmz: I sent you a PM last night with my telephony.db (after mod). Hope that helped! --Larry
Click to expand...
Click to collapse
Yeah I got it. Thanks. Somehow I got mine working. I will make a flashable zip for everyone so they don't have to worry about doing all this. Thanks for finding the right solution
jmz said:
Yeah I got it. Thanks. Somehow I got mine working. I will make a flashable zip for everyone so they don't have to worry about doing all this. Thanks for finding the right solution
Click to expand...
Click to collapse
You would almost need some sort of "interactive" zip, as the line numbers and APN details will most likely be personalized per user. But that's why you are a great Dev and I just know enough to be dangerous! Thanks.
amphi66 said:
You would almost need some sort of "interactive" zip, as the line numbers and APN details will most likely be personalized per user. But that's why you are a great Dev and I just know enough to be dangerous! Thanks.
Click to expand...
Click to collapse
Well as long as the user is ATT it will work. My databases.db. if they aren't they will have to do it manually. I can of course include your for users that are on ST(ATT). And as new users come in just add it in. That's what they did for the other att devices like one x and one x+
Sent from my manta using Tapatalk 2
Hi!
Do any of you guys know how can I change the language on this menu? my phone is on English, my rom is based on Italy stock based rom rXtreme JB4.3 by @r_i_x and oh the other menus is on english like cheking the IMEI or other system menus like LCD check WLAN check this photo right here is the Menu used by my Telco provider to check balance or promos the weird part is it should be on English because I'm from Philippines and because I'm not Chinese and the phone is made in Taiwan. Give me ideas please been looking on google and can't find my luck thanks in advance!
Some dialog windows not in english
Hi!
I have same "problem" (or "feature" gg) on my i9305. I have English as language at Android but some dialog windows pop-up in ¿chinese? ¿korean? No idea but it is not English. For example, after a call is finished appears one of this dialogs not in English.
Any idea?
kimdarrel said:
Hi!
Do any of you guys know how can I change the language on this menu? my phone is on English, my rom is based on Italy stock based rom rXtreme JB4.3 by @r_i_x and oh the other menus is on english like cheking the IMEI or other system menus like LCD check WLAN check this photo right here is the Menu used by my Telco provider to check balance or promos the weird part is it should be on English because I'm from Philippines and because I'm not Chinese and the phone is made in Taiwan. Give me ideas please been looking on google and can't find my luck thanks in advance!
Click to expand...
Click to collapse
Wrong CSC ?
daedric said:
Wrong CSC ?
Click to expand...
Click to collapse
Wrong CSC you say? So I need to flash different ROM with ODIN right?
kimdarrel said:
Wrong CSC you say? So I need to flash different ROM with ODIN right?
Click to expand...
Click to collapse
Yes that should solve the problem
PLooB said:
Yes that should solve the problem
Click to expand...
Click to collapse
Rather flash some of the latest modems (like XXUEMK1 or sth similar).
Well... look at my screenshot. This message appears always after hanging up a call.
And I flashed a new ROM (current one is cyanogenmod) and also a new modem (current one is I9305XXBMD5 and I also had XXUEMK1 previously).
Curious uh?