How to not show sim contact?? - Touch Diamond, MDA Compact IV General

Hello, I am using Elite 2.0
I try to edit registry and used Advanced Configuration Tool to edit it, but also not works....
Anyone can help me??
thanks!

kayzee said:
Hello, I am using Elite 2.0
I try to edit registry and used Advanced Configuration Tool to edit it, but also not works....
Anyone can help me??
thanks!
Click to expand...
Click to collapse
Hide SIM Contacts: HKCU\ControlPanel\Phone - create a new DWORD value named "ShowSim" and set it to 0
from here.http://http://forum.xda-developers.com/showthread.php?t=398265

hi25man said:
Hide SIM Contacts: HKCU\ControlPanel\Phone - create a new DWORD value named "ShowSim" and set it to 0
from here.http://http://forum.xda-developers.com/showthread.php?t=398265
Click to expand...
Click to collapse
I did it already, but after soft reset, not works........
WHY!!!??

Try to do a search - this subject has been already discussed at length...

pedmond said:
Try to do a search - this subject has been already discussed at length...
Click to expand...
Click to collapse
I did it..I type sim contact to search, but couldn't find any solution...
Or I should use another key word??

kayzee said:
I did it..I type sim contact to search, but couldn't find any solution...
Or I should use another key word??
Click to expand...
Click to collapse
Try this:
http://forum.xda-developers.com/showthread.php?t=398265&page=32
and following pages.
It's the current status of your problem.

Related

HTCCALENDAR cannot be found

Sorry if this has been asked before or taken care of but I have searched and looked everywhere and cannot find it.
Well anyway as the subject describes, I get this error when I click on the calendar softkey in the left hand corner of the device. Anyone have any kind of fix for this??
Thanks for your help.
dblake15 said:
Sorry if this has been asked before or taken care of but I have searched and looked everywhere and cannot find it.
Well anyway as the subject describes, I get this error when I click on the calendar softkey in the left hand corner of the device. Anyone have any kind of fix for this??
Thanks for your help.
Click to expand...
Click to collapse
i get this too!!
it's only since i've upgraded to the Cingular_RUU_Wizard_AKU2.3_Custom_RNG_THM_A2DP_TEST2 Rom... is it the same for you?
the calendar still works... just not the soft key function... i've changed it to messaging.. i'd like to know how to resolve though?
cheers
:wink:
Search for HTCCalendar SoftKeys and be sure to select Posts instead of threads.
The answer is there in at least 3 or 4 thread already.
kyphur said:
Search for HTCCalendar SoftKeys and be sure to select Posts instead of threads.
The answer is there in at least 3 or 4 thread already.
Click to expand...
Click to collapse
cheers mate... sorted now.....
this link wll help anyone else...
http://forum.xda-developers.com/viewtopic.php?p=306789&highlight=htccalendar+softkeys#306789
Drop this file into \Windows on your device as a short term fixerupper and whatnot.
Nothing on this thread has worked for me yet. Any suggestions??
newbie2 said:
Nothing on this thread has worked for me yet. Any suggestions??
Click to expand...
Click to collapse
Do you have a file called "htccalendar.exe" in the Windows directory of you device?
summiter said:
newbie2 said:
Nothing on this thread has worked for me yet. Any suggestions??
Click to expand...
Click to collapse
Do you have a file called "htccalendar.exe" in the Windows directory of you device?
Click to expand...
Click to collapse
Yes -- I have /Windows/HTCCalendar_836.exe and I also have /Windows/calendar.exe
I'm doing a workaround right now by having a shortcut through Spb Pocket Plus to my Today screen, so it's not like I can't use the calendar at all So -- not a "biggie", just an annoyance. . .
newbie2 said:
summiter said:
newbie2 said:
Nothing on this thread has worked for me yet. Any suggestions??
Click to expand...
Click to collapse
Do you have a file called "htccalendar.exe" in the Windows directory of you device?
Click to expand...
Click to collapse
Yes -- I have /Windows/HTCCalendar_836.exe and I also have /Windows/calendar.exe
I'm doing a workaround right now by having a shortcut through Spb Pocket Plus to my Today screen, so it's not like I can't use the calendar at all So -- not a "biggie", just an annoyance. . .
Click to expand...
Click to collapse
Which ROM are you using? I don't know why it would be called "HTCCalendar_836.exe " unless you're using a ROM from elsewhere. Try renaming it to "HTCCalendar.exe".
summiter said:
newbie2 said:
summiter said:
newbie2 said:
Nothing on this thread has worked for me yet. Any suggestions??
Click to expand...
Click to collapse
Do you have a file called "htccalendar.exe" in the Windows directory of you device?
Click to expand...
Click to collapse
Yes -- I have /Windows/HTCCalendar_836.exe and I also have /Windows/calendar.exe
I'm doing a workaround right now by having a shortcut through Spb Pocket Plus to my Today screen, so it's not like I can't use the calendar at all So -- not a "biggie", just an annoyance. . .
Click to expand...
Click to collapse
Which ROM are you using? I don't know why it would be called "HTCCalendar_836.exe " unless you're using a ROM from elsewhere. Try renaming it to "HTCCalendar.exe".
Click to expand...
Click to collapse
I'm using the Cingular_RUU_Wizard_AKU2.3_Custom_RNG_THM_A2DP_TEST2 ROM. I changed the "HTCCalendar_836.exe" to "htccalendar.exe" and now it's working fine.
Not sure why the file was misnamed, either. The only actual program installed on my 8125 is MS Voice Command 1.5 and IIWPO, which I found on these forums -- plus some "root files" for Sbsh Pocket Weather and OnCourse Navigator 5. Everything else is installed to my storage card, with shortcuts through the Spb Today plugin to open them.
THANKS FOR YOUR HELP!! I'm a Happy Camper again!!
HTCCaldendar is missing - HTC Touch 2007
I don't get rid of those error.
Dutch error... Dutch windows... on my mobile HTC touch!
What can I do?
I already tried to install a HTCCalendar.exe
I also tried to change the name into HTCCalendar_386.exe
Both don't work...
Please help me out!

Help: Dopod D810 rom & TIM customer care number

Hello,
I flashed my trinity with the dopod GPS enabled rom, everything works well, but when i dial 119 (TIM customer care number) the phone connects me to the emergency number 112 (italian carabinieri), and it writes "emergency" near the number, which doesn't happen when i dial a proper emergency number in Italy (112 or 113)
Any solutions?
Thanks a lot,
GM
gmanca said:
Hello,
I flashed my trinity with the dopod GPS enabled rom, everything works well, but when i dial 119 (TIM customer care number) the phone connects me to the emergency number 112 (italian carabinieri), and it writes "emergency" near the number, which doesn't happen when i dial a proper emergency number in Italy (112 or 113)
Any solutions?
Thanks a lot,
GM
Click to expand...
Click to collapse
Do not panic it is only a registry edit and you add or remove anything you whant.
Use one registry editor (ex. resco) search the number 119 and remove it or add the number you whant.
So simple.
ausdim said:
Do not panic it is only a registry edit and you add or remove anything you whant.
Use one registry editor (ex. resco) search the number 119 and remove it or add the number you whant.
So simple.
Click to expand...
Click to collapse
Thanks for your reply: I tried to modify the registry list (under Security\Ecall): replaced 119 with 113, but when i restart the phone the list goes back to the original values...
Am I doing something wrong??
Thanks Again,
GM
gmanca said:
Thanks for your reply: I tried to modify the registry list (under Security\Ecall): replaced 119 with 113, but when i restart the phone the list goes back to the original values...
Am I doing something wrong??
Thanks Again,
GM
Click to expand...
Click to collapse
Search again and delete it.
HLM\SOFTWARE\OEM\RIL\
HLM\SECURITY\ECALL\
I try only to add some numbers and work's.
Try it,but do it in all multi line values.
ausdim said:
Search again and delete it.
HLM\SOFTWARE\OEM\RIL\
HLM\SECURITY\ECALL\
I try only to add some numbers and work's.
Try it,but do it in all multi line values.
Click to expand...
Click to collapse
OK! It works!
Thanks a lot!
GM

Registry app

Which is the best app to go for to tweak window mobile registry plz? also is there somewhere on this site that has apps to d/l? cheers
I use TotalCommander...
Easy to use and i great filemanager too
http://www.ghisler.com/pocketpc.htm
I've now got that program installed on the diamond but how on earth do I tweak the reg? I want to follow this guide but I don't know where to start with this!
8. Prevent screen switching off during phone call --> HKEY_Local_Machine\Drivers\BuiltIn\RIL\EnableFastD ormantDisplayDuringCall to 0 (Note: does not work on all ROMs)
AND (tested and works on EU ROMs thanks to Rod65)
HKCU\ControlPanel\Phone\Sleep switch value from 1 to 0
Double click on '\\Plugin' then on 'registry'
now you can go wherever you want in the registry...
to edit a value just double click and change
EDIT:
If It's the screen off during calls reg tweak then this worked for me... ( can't remember where I found it?? but it's in the forum somewhere)
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\RIL]
"BatteryTimeoutInCall"=dword:20
"BattSuspendTimeoutInCall"=dword:20
"EnableFastDormantDisplayDuringCall"=dword:1
[HKEY_CURRENT_USER\ControlPanel\Phone]
"Sleep"=dword:1
[HKEY_CURRENT_USER\ControlPanel\BackLight]
"LightSensorPollingEnable"=dword:1
This gives me 20 seconds of screen time before it goes out. You can change 20 to any number you want.
I can,t see //plugin, i have a list of other folders but not one called plugin.
sony007 said:
I can,t see //plugin, i have a list of other folders but not one called plugin.
Click to expand...
Click to collapse
Hmmm... ok? and you are att the 'root'?
because at the top I have //Plugin
This is how my TotalCommander looks like... ( It's in Swedish )
Does there really need to be this many threads on this question? Please use the search before asking.
Use CeRegEditor and you can edit the registy remotly from youre PC
I've managed to get a snapshot of my phone and I think it's the root directory but no //plugin
sony007 said:
I've managed to get a snapshot of my phone and I think it's the root directory but no //plugin
Click to expand...
Click to collapse
Ok, I managed to get it like u 2... just use a singel '\' instead of '//\' at the top...
hope it helps
No joy, no worry m8. Thanx for trying to help!
sony007 said:
No joy, no worry m8. Thanx for trying to help!
Click to expand...
Click to collapse
No... you still have it like '/\' .... just the '\'
finally I got it right cheers m8 much appreciated
After u used total commander...
PHMregedit, very good, very easy in use. try it

How to wake TD2 up from sleep mode by pressing any button

It's incovenient to press the power button only.
I tried to put keylock.exe in it but it don't work.
Pls help
ssseii said:
It's incovenient to press the power button only.
I tried to put keylock.exe in it but it don't work.
Pls help
Click to expand...
Click to collapse
I'm also interested in such an option.
Any news on this one? My Diamond1 had the option "Keylock" onder Settings --> System... The D2 hasn't anymore?
I'm Currently using ThrottleLock V.06 The lockscreen like on Android. It has the option to wake on any key.
Also try the cab file I have below. I used it on my Elfin with 6.5 ROM to Auto Lock when I closed the screen. I'm sure it has the same option to wake on any button.
HTC Touch Freak said:
I'm Currently using ThrottleLock V.06 The lockscreen like on Android. It has the option to wake on any key.
Also try the cab file I have below. I used it on my Elfin with 6.5 ROM to Auto Lock when I closed the screen. I'm sure it has the same option to wake on any button.
Click to expand...
Click to collapse
any method to do this by edit the registry or install a little application? coz i want to use PocketShield but it don't hv this option
Any news on this one?
vegardg said:
Any news on this one?
Click to expand...
Click to collapse
Seems like changing HKCU\controlpanel\Keybd\DefaultKeyLock from 1 to 0 did the trick.
It works great!!
Thank you! vegardg!
hi bro, hwo do u edit that? sorry i'm a noob, hope u can help. thanks,
vegardg said:
Seems like changing HKCU\controlpanel\Keybd\DefaultKeyLock from 1 to 0 did the trick.
Click to expand...
Click to collapse
Didnt work for me
any other suggestions?
Can i copy a file from my athena that would enable this? and if so, which?
wackyr said:
Didnt work for me
any other suggestions?
Can i copy a file from my athena that would enable this? and if so, which?
Click to expand...
Click to collapse
Did you perform a soft reset after changing the registry value?
Very nice! Thanks
vegardg said:
Seems like changing HKCU\controlpanel\Keybd\DefaultKeyLock from 1 to 0 did the trick.
Click to expand...
Click to collapse
Works for me. Thank you.
It works it works now, I like my Topaz so much
It works OK. Thank you.
Thanks.works well.
It works,thanks.
But when it in some program,can't work well,have to use power button to wake up

Simple question...

How to remove unlock the fourth buttons in Start Tab ?
Sorry if my question is stupide...
Thanks in advance
Ricoroc said:
How to remove unlock the fourth buttons in Start Tab ?
Sorry if my question is stupide...
Thanks in advance
Click to expand...
Click to collapse
...hm I can only guess what you mean.
You have the classic start menu and want to remove a program there?
Use file explorer and navigate to \windows\start menu\..delete the programs you don't want.
Ricoroc said:
How to remove unlock the fourth buttons in Start Tab ?
Sorry if my question is stupide...
Thanks in advance
Click to expand...
Click to collapse
Registry hack:
HKLM\Software\HTC\Manila\ProgramLauncher
0 thru 3 change readonly = 0
I guess here is solution in 5th post if you think four non-removable program icons. Change numbers 0 to 3, but I didn't try it.
Thank you All, for your abnegation...
The winner is... harolds & prdic
Thank's cyron_at

Categories

Resources