Database Develop

HELP!!! XDA IIs not functioning after upgrade attempt!!!

Basically I have an O2 UK XDA IIs that I was trying to upgrade to the 1.40 ROM. It started fine but once it said it was starting the upgrade nothing happened and nothing changed on either screens except the device changed into bootloader mode which I understand is normal.
Now I cannot get it out of bootloader and I cannot upgrade. I've read the posts on fixing this but they do not work for me.
The main problem seems to be that while Windows sees a USB device connected it does not know what type it is so I cannot get a connection to ActiveSync. All of the tools I have found on this site require a connection to ActiveSync so I am stuck!!!
Please help ASAP!!!

It's now working - see my solution...
I just got it to work - YAAAH.
Yes, I had read all of wiki but could not find the solution for me. Then while I was reading some other posts this morning I came across someone that said they had removed their battery and then held the hard reset sequence for over 1 minute and then replaced the battery. Since I was desperate I thought it couldn't hurt so I tried it.
Strangely enough, that was the solution!!!!
I'm now successfully upgraded!!!!

i need help with dead xda2i

i tried to update my xda2i rom and it is now dead i am running windows vista. the screen shows usb v1.01 i have read elswhere that all is not lost and some people have suggested trying to install rom again on a pc running windows xp i have tried this without success when i run the upgrade program it shows a communication error 101 i would really appreciate any help or suggestions

If screen shows USB 1.01, it means that your mobile is not completely dead. Worse case when it shows Serial.
Go to Windows XP and install ActiveSync 3.7(only 3.7, not later version) and try to flash again.
Don't worry, I think it will be ok.

peter111964 said:
i tried to update my xda2i rom and it is now dead i am running windows vista. the screen shows usb v1.01 i have read elswhere that all is not lost and some people have suggested trying to install rom again on a pc running windows xp i have tried this without success when i run the upgrade program it shows a communication error 101 i would really appreciate any help or suggestions
Click to expand...
Click to collapse
Here's a way of rescuing an Alpine stuck on Bootloader...
http://forum.xda-developers.com/showthread.php?p=1739989

man im really thnx to you. i tryed to update wm6 on my xda2i(sorry i didnt know) and same ****... im in sama stuation vista ect ect.... the worst thing is i tried on my dads phone he didnt understand what is going on(thnx god) and by the way really thnx to server too

XDA lli DEAD!
Hi ... someone can help me ... I dont want to update my PDA is clear .. but I found a video
http://www.youtube.com/watch?v=lHbIjKVzMYg&feature=related
Ok this is not the point, I restar my PDA and stop´s I take out the battery and when I tray again dont do anything I plugin in my PC and dont dettect any light or system ... WHAT CAN I DO? HELLLLLLLP ME!

I've just been given an xda 2i but there is no OS on it at all..just the serial screen, i've tried to hard reset but it just goes back to serial..i think i may need to put a new 2003se onto it but cannot find one anywhere, can anybody help?

baltisalty said:
I've just been given an xda 2i but there is no OS on it at all..just the serial screen, i've tried to hard reset but it just goes back to serial..i think i may need to put a new 2003se onto it but cannot find one anywhere, can anybody help?
Click to expand...
Click to collapse
you obviously canot read old post or anything relating to the forum, if you care to actually look there is a post in the forum about the update, and a link in the post to download the OS.
pls try looking before asking daft questions.
FYI the post is called... Deathnoise 1.11.171 ROM. Bluetooth patched, camera fixed. Radio 1.04
amazing isnt it? and that was just a few lines down from this topic, it took me ooo 1 second to find it.
and for the guy that posted teh rply before this one, your an idiot that was a XDA2 not XDA2i
this flame of a idiotic noob was braught to you by.. Flame co.inc.
god sakes dont anybody ever EVER look to see if the few thousand ppl that have been here before may have had the same problem? try reading other posts before asking daft questions

Get a life..and a sh*g skeeve..you take life too seriously. Some people have meaningful and busy lives and don't spend hours and days like you trawling through all these posts, there is a world outside your bedroom you know

ps thanks for the link, i'm just too busy to have checked for my 'idiot noob self' but i've bought a new pda anyway after posting that

baltisalty said:
ps thanks for the link, i'm just too busy to have checked for my 'idiot noob self' but i've bought a new pda anyway after posting that
Click to expand...
Click to collapse
you proved my point, nuf said.
It took longer for you to hijack this thread than it would have to check another thread. That would have been much faster to read than signing up to the forum and asking the same old questions.
its very annoying when someone asks a question that been asked a thousand times, I am a mod (not here) in a few pc based forums, you know how long we have to spend removing threads or answering the same olds which have been asked time and time again, even though there are forum search engines, stickies or other posts answering them?
To be honest its you who needs to learn how to use a forum. And READ the forum rules. just like the hundreds of other users out there that never bother.
fyi: I am a second chef in a restaurant and work 36 hours a week. I also run a small pc repair business in my spare time, I just happen to love my xda2 and xad2i, so frequent these forums. Odd really shame I cannot get out of my bedroom and getting a "sh*g"? Well not as often as I would like, but I do manage. And its not nice making this a personal slur, as I was only pointing out your ineptitude about the use and etiquette of the net and forums.
p.s. if you would care to actually read my post as well, i never called you anything, it was the guy that poseted before you that tried to update to wm5/6. that "idiot noob self" must be somthing you get called alot (thats a personnel dig, as i like to leave things even)

Server said:
If screen shows USB 1.01, it means that your mobile is not completely dead. Worse case when it shows Serial.
Go to Windows XP and install ActiveSync 3.7(only 3.7, not later version) and try to flash again.
Don't worry, I think it will be ok.
Click to expand...
Click to collapse
HELp !!
My XDa2I has today started randam resets , 7 times thus far !
I changed the battery with no success and it has just settled down at last .
Each reset showed the serial numbers at the bottom of the screen .
Does that indicate something ??

///////////
///////////////
???????????//

ideas where I can get a cheap replacement battery for my dying XDA 2i ?

Stuck after ROM flash:error 206

I decided to reflash my wizard after it continually getting slower and slower after a year. I haven't done it in awhile. It is already unlocked. I flashed the 1.05 rom and it was working. I was going to go up in steps ending with the touch rom. I flashed the wrong rom evidently and now am downgraded to 1.01 on spl/ipl and os 2.26.10.2. The wizard won't activate Activesync and I can't get any communication. I tried rebooting the pc and the wizard multiple times. Still nothing. Need something quick to fix this. Everytime I tried to launch a rom flash I get an error 206.

digitalmayhem said:
I decided to reflash my wizard after it continually getting slower and slower after a year. I haven't done it in awhile. It is already unlocked. I flashed the 1.05 rom and it was working. I was going to go up in steps ending with the touch rom. I flashed the wrong rom evidently and now am downgraded to 1.01 on spl/ipl and os 2.26.10.2. The wizard won't activate Activesync and I can't get any communication. I tried rebooting the pc and the wizard multiple times. Still nothing. Need something quick to fix this. Everytime I tried to launch a rom flash I get an error 206.
Click to expand...
Click to collapse
If it was already CID unlocked,there was no need to downgrade again 1.05,once CID unlocked will remain unlocked forever,unless you intentionally don't flash back the locking code back on to it.
Now try to get into Bootloaders (multicolor screen) hook up the phone with pc via usb cable and check small usb appear at the bottom of the bootloaders,if it appears then download the official stock rom and flash to recover back to the default status,then download the WST 4.2.2 tool and run the 'CID Action' button to verify the CID lock/unlock status of the phone.if its still CID unlocked then upgrade to any wm6 rom of your choice,otherwise perform the unlocking method again.If the usb doesn't appear,then you have a connectivity problem,check the usb cable or the mini usb port of the phone is faulty.Assuming you are doing on winXP.

"and check small usb appear at the bottom of the bootloaders..."
I don't understand what your talking about when you say bootloader. The bootloader is the ROM installation program is it not. How do you check an icon in that? If you mean system trays on the PC or PDA, no USB icon shows. I got no radio or sync services working. The OS is corrupted and operates extremely slow. I can't get any kind of communication between the PDA and PC. Not even through windows explorer (running XP). It's not the cable, I just used it to downgrade to 1.05 and it was working fine. It wasn't until I tried to upgrade to back up, and selected the wrong ROM off my USB storage, that it flashed the wrong ROM and caused all this. Mostly because I hate trying to remember what the longs string of digits mean on each ROM. Especially after I haven't looked at all the files and haven't done a flash in a year.
So no communication. That's the issue.

So does anyone else have any info? As I stated, I can't get any communication between the MDA and the PC. So I don't know how I can flash a stable ROM.

I repeat again,Get the phone in Bootloaders mode (multicolor screen) by pressing and keep holding down the camera button and at the same time either 'Soft Reset' or 'Power On' the phone,but keep holding down the camera button,till phone boots up in Bootloaders mode(multicolor screen),hook up the phone with pc via usb cable and check if small usb appears "At the bottom of the Bootloaders Screen" and not in the system tray of the pc. If it appears then follow the advise I gave you in my above post,but if doesn't appear then you have a connectivity problem.

digitalmayhem said:
"and check small usb appear at the bottom of the bootloaders..."
I don't understand what your talking about when you say bootloader.
Click to expand...
Click to collapse
The Wiki as all the (basic) info to get you started.

It doesn't work
I can get into Bootloaders mode with usb at the bottom. BUT, I can't get any connection to ActiveSync, any of the ROM update utilities and no radio network connections. That was the specific thing I'm telling you. If the Desktop and the PDA won't talk to each other, what am I gonna do? It's not the cable either. The Wizard Tool will not pick it up either when I used it to try to get device info. If your going suggest any kind of ROM or software off the forum, please specify exact version and title so I don't have to go through 100+ pages doing a search to find a specific piece of software off a vague title such as "stock ROM". You may know what it means because your always on the forum. When someone hasn't been back here in awhile they aren't going to remember some arbitrary string of numbers and letters indicating a certain ROM that they haven't used for a year. Too many of you "regulars" get all pissy about things when someone asks a question. If someone keeps asking the same questions, it's because the forum is NOT laid out in an easily searchable fashion unless you have specific search criteria for things such as CUSTOM_RUU_Wizard_1050412_WWE_10111210_WWE instead of "stock ROM".

Have you read the Wiki?
http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies
Or other posts?
You'd know by now that in bootloader mode ActiveSync or any other tool (that uses ActiveSync) can't communicate with the phone but that it's possible to upgrade a ROM using the official upgrade utilities.
Have you tried making a search and getting hundreds of undesired and repeated posts which makes you lose days searching for a specific thing?
If you'd been here as long as many of us you'd also be tired of people asking same questions. I was once a fresh member and i would always 'waste' my time than others'.
Also the forum search feature has been enhanced by using Google's search engine instead of internal.

There is simply no way I can express my deep and sincere gratitude for the information available in this forum. Let me explain and I think you may understand why.
Several days ago my wife and I received a couple of HTC 8125's from Ebay. Being a tinkerer I wanted to see what I could do so I upgraded mine to Mobile 6 with Touch-Flo.
The wife was skeptical and waited to see how it worked out. Of course she eventually decided to go for the Bling and handed me hers to upgrade as well.
As soon as the upgrade started on hers the pda went bootscreen and locked up. Sooooo I'm sweating bullets and searching the forums as fast as I can go before she finds out. Then I find this thread and the last post... Don't need Activesync to update as long as the device pops up a little usb on the screen when you plug up... I flashed the 8125 upgrade and *Bang*! Back in business. Continued the upgrade and all is well. The wife is now walking around with her "Bling" and happy and I am off the hook!
Thanks for the GREAT FORUM!

Rowdyone said:
There is simply no way I can express my deep and sincere gratitude for the information available in this forum. Let me explain and I think you may understand why.
Several days ago my wife and I received a couple of HTC 8125's from Ebay. Being a tinkerer I wanted to see what I could do so I upgraded mine to Mobile 6 with Touch-Flo.
The wife was skeptical and waited to see how it worked out. Of course she eventually decided to go for the Bling and handed me hers to upgrade as well.
As soon as the upgrade started on hers the pda went bootscreen and locked up. Sooooo I'm sweating bullets and searching the forums as fast as I can go before she finds out. Then I find this thread and the last post... Don't need Activesync to update as long as the device pops up a little usb on the screen when you plug up... I flashed the 8125 upgrade and *Bang*! Back in business. Continued the upgrade and all is well. The wife is now walking around with her "Bling" and happy and I am off the hook!
Thanks for the GREAT FORUM!
Click to expand...
Click to collapse
Thankz !
We all highly appreciate it,glad you got it working .Thats what this Forum is sooo famous for "Help & Care"

no usb activity

First I want to say i really like this forum. It has al lot of info.
And I appoligize for my English, I'm from The Netherlands.
Now my question, ik recently(few days a go) bought a TytnII of a member of this forum (don't know his nick, doesn't matter) but when i came home I noticed that when I connected to my computer via USB, there was no activity at all.
I already tried to hard reset it to factory defaults, but with no luck.
Can any one help me out?
(I already tried to turn off the advanced at usb to pc connections, and also my active sync is okey because it does work for my qtek9100)
thanks very much.
Patrick

Priknr1 said:
First I want to say i really like this forum. It has al lot of info.
And I appoligize for my English, I'm from The Netherlands.
Now my question, ik recently(few days a go) bought a TytnII of a member of this forum (don't know his nick, doesn't matter) but when i came home I noticed that when I connected to my computer via USB, there was no activity at all.
I already tried to hard reset it to factory defaults, but with no luck.
Can any one help me out?
(I already tried to turn off the advanced at usb to pc connections, and also my active sync is okey because it does work for my qtek9100)
thanks very much.
Patrick
Click to expand...
Click to collapse
When u plug it in, what does the led light(the one thet normaly blink green) do?
EDIT:there is a search function on this site. Try to look for "kaiser can not connect activesync" and try to read these threads.
This one looked similar, give it a try: http://forum.xda-developers.com/showthread.php?p=2204391

I already found that post, the problem is not just actuve sync, mycomputer does not respond at al, does not see a divice at the usb port or anything.

Priknr1 said:
I already found that post, the problem is not just actuve sync, mycomputer does not respond at al, does not see a divice at the usb port or anything.
Click to expand...
Click to collapse
do u have a vista or xp? I remember some posts about problems with vista, unfortunately I cant remember where it was.

I have xp, I know about the problems with Vista , but that's not my problem :S
Is it possible to place a new image or something like that? If it is possible where do i find such an image and how do i install it? Is this possible from the SD card?

Priknr1 said:
I have xp, I know about the problems with Vista , but that's not my problem :S
Is it possible to place a new image or something like that? If it is possible where do i find such an image and how do i install it? Is this possible from the SD card?
Click to expand...
Click to collapse
I really dont know what can cause this issue.
To find out about rom flashing, u better start here: http://forum.xda-developers.com/showthread.php?t=369282

when you got your new devcie did you install activsync from the new disc that came with it or did you assume activsync is all the same( as an owner of a htc univwersal i know activsync 4.1 will not operate the tytn 2 you have to use activsync 4.5 also what usb lead are you using try using a lead from a different device, those leads come with pretty much everything i have 6 and i only remember the tytn 2 one being an important one as i use the internet sharing a lot

Mikulec said:
I really dont know what can cause this issue.
To find out about rom flashing, u better start here: http://forum.xda-developers.com/showthread.php?t=369282
Click to expand...
Click to collapse
But is there a chance that this solves my problem or isn't it worth the try?

you said that youd reset to factory settings, so the rom will be as good as itl get in its origional form.
so answer what usb lead you using, is it the one that was in the box with the phone
and
did you install the newer version of activsync from the disc that came from the new phones box

jayjay8585 said:
you said that youd reset to factory settings, so the rom will be as good as itl get in its origional form.
so answer what usb lead you using, is it the one that was in the box with the phone
and
did you install the newer version of activsync from the disc that came from the new phones box
Click to expand...
Click to collapse
i downloaded the newest active sync (4.5) didn't work.
But why does windows xp not react at all when i plug it in? it should at least see new hardware added wright?
With lead you mean the usb-cable? (sorry ain't that good at english)
i think it's the original one, but offcourse because i can't say for sure because i didn't buy it in a store but second hand. He did give me the reciet an the original box and everything so i guess it's also the original cable.
Also i tried 4 diffirent ones.

well im afraid it looks more like a pc issue than a phone issue what os you got on your pc and give me all your specs, and please tell your windows is genuine

U can also try different cable, just to be sure its not the cable that is causing these problems.

maybe they sold you a device with a messed up usb port? maybe 1 of the 3 middle pins of the top set of pins when the device is face up is damaged..thats what happened to mine and you couldnt tell by looking at it...

pazookie said:
maybe they sold you a device with a messed up usb port? maybe 1 of the 3 middle pins of the top set of pins when the device is face up is damaged..thats what happened to mine and you couldnt tell by looking at it...
Click to expand...
Click to collapse
Okey so that is pssible, well I believe it's only 6 months old, so I'll go to the store with it.
@ jayjay8585 and Mikulec
I appriciate your effort for helping out, but if you've read the posts, you would have read that i have an other pda that does work, so not a OS problem(and yes it's a legit OS ) and that i've used several different cables
Is there a way to test if it's just a broken usb ?

Laptop Doesn't See Tilt
I've got the same issue. Got mine second hand only about 2 weeks ago. I was told it was unlocked but it was not. Got the unlock code from AT&T. When I plug the usb cord into the laptop it charges but the computer doesn't recognize new hardware. Any help would be appreciated and what I find out I'll pass on.

Jgreer said:
I've got the same issue. Got mine second hand only about 2 weeks ago. I was told it was unlocked but it was not. Got the unlock code from AT&T. When I plug the usb cord into the laptop it charges but the computer doesn't recognize new hardware. Any help would be appreciated and what I find out I'll pass on.
Click to expand...
Click to collapse
Mine probably has a mainboard roblem because an other firmware was put on, Icontacted HTC and it will be picked up for repairing

I sometimes have a simulair issue... with me it is because the USB connector plugs are slightly out of place (in the phone).
You can bend than back with a thin knife or someting. (dont put to much pressure)

I assume from reading the other posts, you DO have Activesync installed, and you did try a different USB cable?
If so, did you try another USB port on your computer?

Please read for this is no oridinary problem.....Unable to Activesync

I have AT&T 8925, live in United States, Run on a Dutty Rom and pretty much everything else is simple. No serious tweaking or reg hacks.
So Today, I go into work, plug in my PDA, and no sync. It is charging via the USB, but not syncing to Activesync. I need Activesync, it has all my contacts, appointments, etc etc. In the process of trying to troubleshoot this problem I have wiped my phone clean.
I have tried it all;
clearing storage on phone
deleting activesync off PC (4.5) and reinstalling, multiple times
Used Microsfts Troubleshooting guide
I have installed Activesync on three different PC's and all wont recognize the phone, as if its not there, but it does charge. I also have tried 3 different USB cords.
I don't know what to do, I even stumped the HTC troubleshooting tech guy. I also am screwed since if I send this phone back to AT&T under warranty to get a new one they will see the Dutty ROM and that will void my warranty. I would reinstall the original Windows/AT&T shipped Rom, but I cant get the Activesync up or don't know how to get a PC to recognize my PDA.
So.........I beg and plead, lend your advice for as long as this thread goes (hoping its in the right place) I will try your ideas, theories, and what nots.
IT seems like it would just be something so simple......is it? Where is my Data Connection.....
Thank you fellow XDA members for your time and assistance.
~b

Do you get the "connecting" sound on the PC when you plug the device (same one you get when plugging any USB device)? If not I'd go for hardware fault on the phone's USB port... maybe one of the connector's solder points got ripped or whatever. That's if the port isn't fried altogether... Done anything special between the last time it worked and the first one it didn't?

This may be obvious...but did you restart your computer and hard reset your phone, then try? Im using vista and ive had no problems with any roms...so it just maybe a temporary problem.
Also test this while using the back USB ports, the front ports do not connect the same as the back ports do.

When my new Tilt's screen died an untimely death, I spent all day restoring all my goodies to the replacement Tilt. The next day, went to ActiveSync, and NOTHING! Charged, etc, but no connection. I did all the steps you tried and a few more.
Then, after wasting an entire evening, I found the solution!
Go to Connections>USB to PC, and uncheck 'Enable advanced network". Plug it and let 'er sync.

jlmwrite said:
When my new Tilt's screen died an untimely death, I spent all day restoring all my goodies to the replacement Tilt. The next day, went to ActiveSync, and NOTHING! Charged, etc, but no connection. I did all the steps you tried and a few more.
Then, after wasting an entire evening, I found the solution!
Go to Connections>USB to PC, and uncheck 'Enable advanced network". Plug it and let 'er sync.
Click to expand...
Click to collapse
ahaha yea i thought graff had already checked the software so i didnt bother going into that

I suggest u try to search, there is a search option - type there something like "cannot conect to activesync" - there are milions of threads with this problem, unfortunately I dont know if there will be a solution for u. Just try that out and read.

This happened to me and I had to send my phone in to at&t. I know this probably wasn't what you wanted to hear. They sent me another phone and gave me 10 days from the day I received the new phone to send back the old. I also had the same rom as above I couldn't even flash it via sd card, so I sent it as was and haven't heard anything since. This was two months ago. The problem turned out to be with the mini usb port, it was warped like it got to hot or something. Maybe from using in car for gps I don't know. I hope this helps.

answers and bump
As for searching........always someone has to say it, "why dont you try the search option" - my friend, I am a google allstar and beleive in the forum searching till you can no more then post theory. Now saying that, I am willing to bet the answer to my problem is buried within a post in some thread with some fabric of the entire XDA forum. Finding it though can be harder than removing bubblegum from buckwheats hair.
So I have tried a hard reset for the PDA and the restarted my PC, several times.
...no go
I knew something was wrong when I lost the "ding" every time I hooked up the PDA via USB to my computer.
I had tried the unchecking the Enable Advanced Network before but did again and reset the phone with hopes of glory today. No glory.
I feel I have lost the phone and am ready to move on. Its just so friggen hard since it charges. How can it charge, and not stream data! I fried just the right parts of the mini USB? Blasted! So so so so disappointing because I felt I really had it nailed this time with the perfect radio, ROM, Dialer, programs, software, it all.....well maybe not radio, but my receptions suck all the time anyways and I live in Charlotte NC, a major US city with great AT&T coverage.
Now.....I am still open to any ideas and creative thoughts......but how do I get a the original WM6 Shipped ROM back on the phone? If I cant get any PC to recognize my PC via USB? I am calling in the warranty people today and not speaking of my Dutty, but having a new phone shipped. I just hope not to see a nasty bill come one month or two.
Thanks so far, well done XDA forum friends,
~b

donroja said:
This happened to me and I had to send my phone in to at&t. I know this probably wasn't what you wanted to hear. They sent me another phone and gave me 10 days from the day I received the new phone to send back the old. I also had the same rom as above I couldn't even flash it via sd card, so I sent it as was and haven't heard anything since. This was two months ago. The problem turned out to be with the mini usb port, it was warped like it got to hot or something. Maybe from using in car for gps I don't know. I hope this helps.
Click to expand...
Click to collapse
.....I am curious for you. Two months seems like your in the clear, but I hope not to jinx you. I have done the whole 10 days thing 6 times so far since the original purchase of my 8525 in August of 2007. Wasn't until the 5th time I complained and they offered me the 8925 as a replacement. The first five were all shipped back on time, with original ROM's and valid device malfunctions. Never have I been billed.....yet........
~b

graff40b said:
As for searching........always someone has to say it, "why dont you try the search option" - my friend, I am a google allstar and beleive in the forum searching till you can no more then post theory. Now saying that, I am willing to bet the answer to my problem is buried within a post in some thread with some fabric of the entire XDA forum. Finding it though can be harder than removing bubblegum from buckwheats hair.
So I have tried a hard reset for the PDA and the restarted my PC, several times.
...no go
I knew something was wrong when I lost the "ding" every time I hooked up the PDA via USB to my computer.
I had tried the unchecking the Enable Advanced Network before but did again and reset the phone with hopes of glory today. No glory.
I feel I have lost the phone and am ready to move on. Its just so friggen hard since it charges. How can it charge, and not stream data! I fried just the right parts of the mini USB? Blasted! So so so so disappointing because I felt I really had it nailed this time with the perfect radio, ROM, Dialer, programs, software, it all.....well maybe not radio, but my receptions suck all the time anyways and I live in Charlotte NC, a major US city with great AT&T coverage.
Now.....I am still open to any ideas and creative thoughts......but how do I get a the original WM6 Shipped ROM back on the phone? If I cant get any PC to recognize my PC via USB? I am calling in the warranty people today and not speaking of my Dutty, but having a new phone shipped. I just hope not to see a nasty bill come one month or two.
Thanks so far, well done XDA forum friends,
~b
Click to expand...
Click to collapse
About the flashing original rom- u dont need a activesync for that, u can flash the rom via SDcard.

Mikulec said:
About the flashing original rom- u dont need a activesync for that, u can flash the rom via SDcard.
Click to expand...
Click to collapse
True, but forst I gotta get my mini back in the full size adapter then find a friend with a printer that accepts my scandisk so I can transfer the file over to it. Right now at work trying to save the file to the storage card via wifi. Shall be interesting to see if it works. Didnt on phone, said not enough mem.
Thanks for the suggestion, was so hooked on USB, forgot the other various aspects of the all great HTC.
~b

Related software for Microsoft ActiveSync 4.5
Java Runtime Environment 1.6.0.2 (updated) Java software allows you to run applications called "applets" that are written in the Java programming language. These applets allow
.NET Framework Version 3.0 The Microsoft .NET Framework 3.0 is the new managed code programming model for Windows®. It combines the power of the
DirectX 9.0 Microsoft DirectX is a group of technologies designed to make Windows-based computers an ideal platform for running and displaying applications
ATI Catalyst Drivers The latest Windows XP drivers and software for the Radeon range of ATI graphics cards. Includes: * Catalyst XP Drivers
Thats just some of it, it is more to it. I use xp anyways. You mention reinstalling active sync but have you tried .NET Framework Version 3.0 ? If the device charge via usb I would suspect its software issues on youre pc. Could be bad version of some of the software aswell, try download again making sure its the latest and so on. Good luck
Edit: Why dont you back everything up and reflash from microsd and then see if it will connect. Should solve it.

raiisak said:
Related software for Microsoft ActiveSync 4.5
Java Runtime Environment 1.6.0.2 (updated) Java software allows you to run applications called "applets" that are written in the Java programming language. These applets allow
.NET Framework Version 3.0 The Microsoft .NET Framework 3.0 is the new managed code programming model for Windows®. It combines the power of the
DirectX 9.0 Microsoft DirectX is a group of technologies designed to make Windows-based computers an ideal platform for running and displaying applications
ATI Catalyst Drivers The latest Windows XP drivers and software for the Radeon range of ATI graphics cards. Includes: * Catalyst XP Drivers
Thats just some of it, it is more to it. I use xp anyways. You mention reinstalling active sync but have you tried .NET Framework Version 3.0 ? If the device charge via usb I would suspect its software issues on youre pc. Could be bad version of some of the software aswell, try download again making sure its the latest and so on. Good luck
Edit: Why dont you back everything up and reflash from microsd and then see if it will connect. Should solve it.
Click to expand...
Click to collapse
You are wise my friend. Thank you for the other software, I will try that. Funny thing about the PC, is I have tried three different PC's, all which it used to sync or try to sync with when I would just be charging. I would love to flash via SD card, but first I need the adapter for my computer, or track a friend down with a printer and correct slot. That might be done tonight. I am at work now trying to download the a rapidshare file of a shipped rom, free style, slow style, and prolly not going to work. But hey, its a learning experience.
Either way, my warranty is up in August, so I figure why not get one more nice new fresh 8925 before then. Ordered new one today, comes next week. I will still try and flash back to the shipped rom via SD tonight.
XDA and its members Rock, this is by far the most help I have ever received via my few threads.
~b

graff40b said:
You are wise my friend. Thank you for the other software, I will try that. Funny thing about the PC, is I have tried three different PC's, all which it used to sync or try to sync with when I would just be charging. I would love to flash via SD card, but first I need the adapter for my computer, or track a friend down with a printer and correct slot. That might be done tonight. I am at work now trying to download the a rapidshare file of a shipped rom, free style, slow style, and prolly not going to work. But hey, its a learning experience.
Either way, my warranty is up in August, so I figure why not get one more nice new fresh 8925 before then. Ordered new one today, comes next week. I will still try and flash back to the shipped rom via SD tonight.
XDA and its members Rock, this is by far the most help I have ever received via my few threads.
~b
Click to expand...
Click to collapse
Post your results then.
Everybody knows that xda rulez.