Related
I know this is for only XDA devices, & I tried searching but I didnt see anything except for 1 post. http://forum.xda-developers.com/viewtopic.php?t=11128&highlight=nokia+car+kit
But I thought I might try you guys here.
I have posted on other HP related sites as well for the same problem.
This site was so usefull when I had my Siemens SX56.
The only thing I wanted to know is if anyone knows if there is any add on driver I can add to it to make the hp6315 bond with my nokia bluetooth carkit model # CARK112.
I cant seem to get it to bond?
I did get my Jabra BT200 to bond and work correctly.
This is what nokia says about it?
*Compatible phones must support the Bluetooth 1.1 specification and Handsfree profile.
As far as I know the hp 6315 doesn't support handsfree only headset?
Any help would be greatly appreciated.
...have you tried the "explore a BT device" in the BT connection wizard, not the "handsfree/headset" set-up? I paired it together once & it worked fine...I do beleive this "widcomm stack of BT" supports handsfree...
BTW, after I added another headset (my SE HBH-65) it didn't connect again, but BT is funny/finicky doing multi-device connxns...
Nokia Carkit with HP6315??????
Thanks , I will try that I will let you know.
...another tip...even better tyhan the last one that I don't think is necessary if you use this one : when pairing h-set/handsfree device about half way thru the wizard hit the tools button (I think?) & it default-checks, "show only handsfree devices", uncheck that & you should now see the carkit show-up! This of course makes no sense since the carkit is a handsfree device but it seems to work so go with it...
thanks that did the trick!!!!!!
I just yest spent some extended time with CarKit (it in my wife's car) & it wasn't very reliable. After turning the car off & then back on it would not re-establish a pairing. After resetting both iPaq & carkit (turning off & on again, I'd go thru the wizard again & it would re-establish but would duplicate the carkit on the iPaq...
Has your kit been more reliable? (I have the nokia Cark112)
nokia car kit with ipaq
No. mine has been doing the same thing.
...ya, my work around has been to delete the previous carkit pairing & re-establish itself - a new one - obviously not great but workable if you need it...btw, every Nokia phone (even the newest ones) work fine with this kit...so who knows - I may get the Nokia 9500...
I thought I would add my tuppenyworth to the Tomtom problems with the XDA 2i. Bought a wired Tomtom "Official" GPS receiver for it and tried it with TT5 to no avail. It would not recognise the receiver at all no matter how I tried to specify it's com ports etc..
I eventually upgraded to TT5.1 and it worked immediately with no problems at all. Been working fine ever since.
if it matters
hi, i have a xda 2i and use tomtom 5.20, when i use my wired gps i was told to switch off the infra red beam, mine seams to work like that.
port problem?
could anybody help? my xda2i never works with tomtom5...
how to switch the beam off pls??
switch off receiving beam????
under setting > connections > beam
O2 XDAIIi with tomtom 5.21 and BT GPS receiver
but there is still problem with the signals, it can display the right UTC time, and numbers of satellites, such as 29 on the North, but there all gray and said no valid GPS signal!
the com ports couldn't be changed which are com5 inboard, com6 outboard.
does anyone know what the proble is pls??
ps: I installed the BTHTools1100, but no change
see the attachment pic
many thanks
Hi Piers,
i've got exactly the same problem :-(.
With a GlobalStar BT348, the GPS signals are plainly perfect. But when i connect the official Tomtom wired receiver, i only get the grey bars, although, like you, the UTC and spinning wheel are there, indicating the GPS is detected.
I looked at the compatibility list on the Tomtom site, and besides Dell and iPaqs, there seems to be nothing compatible with the wired receiver.
Anybody has other information?
Hi again,
I think I found the solution
1. of course, "receive all incoming beams" has to be off
2. apparently, you can not have a paired BT GPS receiver (even inactive) when you want to use the wired Tomtom receiver... :shock:
I guess it has to do with the way WM2005 deals with GPS... :?:
So, in BT devices, delete the partnership with the BT receiver and everything works fine with the wired one. In TT5, simply declare the receiver as a wired Tomtom
I used it this morning, driving 100km, 90minutes, without a crash or anything
Hi all,
I have posted this question also over a 4winmobile as I cant access xda-dev from work. Hopefully someone here can help.
I've been having difficulty with my Kaiser and a Parrot MK6000 car kit. I have tested the carkit with a Nokia as well, and have some results to report to aid in troubleshooting.
The Nokia was paired with the Parrot MK6000 kit, answers and makes calls and streams audio no problem. When the car is turned off, the pairing ends, when the car is started again the pairing starts back up ... auto, no probs. In addition, if you make a call with the phone, at the end of the call the pairing is ended, but within a few seconds is re-established.
On my Kaiser, I can pair the phone and car kit, but if the connection is lost (ie the car is turned off or bluetooth is stopped on the phone) and then I turn the car back on, it will not automatically pair. It attempts to, the car kit mutes the car radio and plays a tone, but the pairing is not established by the phone. It continues to do this every 30 seconds or so, but does not establish a connection.
Also, if I make a call with the phone when it has been sucessfully paired, on ending the call, the phone will not re-establish the pairing.
My conclusion is that all of my troubles relate to the fact that the pairing will not re-establish once lost.
Is anyone able to assist? I have upgraded the Kaiser radio to 1.27.12.32 (yes ... just tonite, see http://forum.xda-developers.com/showthread.php?t=349528&page=2) but have also tried radio roms 1.27.12.11 and 1.27.12.17 with no success. The ROM version is 1.81.861.0. Ive also tried installing some of the BT stacks that were developed up for the Hermes with no success. I've also installed Jetware with no sucess.
Getting very frustrated!
Adam
adamcullen said:
Hi all,
I have posted this question also over a 4winmobile as I cant access xda-dev from work. Hopefully someone here can help.
I've been having difficulty with my Kaiser and a Parrot MK6000 car kit. I have tested the carkit with a Nokia as well, and have some results to report to aid in troubleshooting.
The Nokia was paired with the Parrot MK6000 kit, answers and makes calls and streams audio no problem. When the car is turned off, the pairing ends, when the car is started again the pairing starts back up ... auto, no probs. In addition, if you make a call with the phone, at the end of the call the pairing is ended, but within a few seconds is re-established.
On my Kaiser, I can pair the phone and car kit, but if the connection is lost (ie the car is turned off or bluetooth is stopped on the phone) and then I turn the car back on, it will not automatically pair. It attempts to, the car kit mutes the car radio and plays a tone, but the pairing is not established by the phone. It continues to do this every 30 seconds or so, but does not establish a connection.
Also, if I make a call with the phone when it has been sucessfully paired, on ending the call, the phone will not re-establish the pairing.
My conclusion is that all of my troubles relate to the fact that the pairing will not re-establish once lost.
Is anyone able to assist? I have upgraded the Kaiser radio to 1.27.12.32 (yes ... just tonite, see http://forum.xda-developers.com/showthread.php?t=349528&page=2) but have also tried radio roms 1.27.12.11 and 1.27.12.17 with no success. The ROM version is 1.81.861.0. Ive also tried installing some of the BT stacks that were developed up for the Hermes with no success. I've also installed Jetware with no sucess.
Getting very frustrated!
Adam
Click to expand...
Click to collapse
Have you tried these registry tweaks? http://msdn2.microsoft.com/en-us/library/aa915920.aspx
There is a know problem with the Parrot kit and you will find a thread in this forum where a member has contacted Parrrot who replied that they are addressing the issue.
This one my be usefull.
http://forum.xda-developers.com/showthread.php?t=340908&highlight=parrot
NuShrike said:
Have you tried these registry tweaks? http://msdn2.microsoft.com/en-us/library/aa915920.aspx
Click to expand...
Click to collapse
Hi, thanks for that pointer ... most of what is described in that MSDN library isn't in my registry.
Im going to manually insert them all and see what happens.
A
Still no luck
I tried updating the Reg with the tweeks as suggest ... but still no luck. All i get is still the initial pair, but on disconnection, no automatic re-pairing of the device to the car kit.
Im doomed at this stage.
You're not alone. I have the same problem with my Motorola S9 headphones and Microsoft SYNC in my 2008 Ford Edge. Sometimes I have to turn BT on and off a couple of times for it to connect.
agreed
Turning the BT on and off a few times has also be part of my "solution" package.
This really isn't acceptable though. This device should automatically pair up, just like every other BT device does. BT is a protocol that should be adhered to and just work.
I have also tried this on my other WM device. It pairs a little better, but is not great. I've tried compairing the registry values of that device to my Kaiser, but I just dont understand the functionality of the reg settings enough to work out what to change.
Is there some developer out there who can help? This type of problem was experienced by us all back in the early days of the Hermes and this community sorted it out.
Can any developer out there help, like working out a port of the Widcomm BT stack for Kaiser?
a
Interesting. I have a Nokia CK-7W bluetooth car kit and the Tyn II has re-connected/connected to the kit every time. Actually more reliable than my SE K800i. Sorry that it doesn't help you.
Hey Juzzman,
nah, that doesnt help ... but does increase the frustration level!
Seems like you need to have a Nokia component in there somewhere for it to work ;-)
Anyhow, Im still convinced it is a bluetooth stack problem in the Kaiser. I'm going to try flashing one of the AT&T based roms and the other radio version and see what happens.
Cheers
Adam
I've had BT issues with all of my HTC devices, it's very frustrating.
Currently I've got a Kaiser (Orange), E650 (Orange) and a new S730, none of which work on my Pioneer headunit without Jetware.
The Kaiser with Jetware pairs up ok, but the sound is really tinny.
The E650 with Jetware sounds fine, but I can only send 150 contacts to the headunit.
The S730 doesn't pair, haven't put Jetware on it yet.
In the past I've had BT issues with M3100, C600, C500 etc etc.
Why the hell doesn't MS sort out their bloody BT stack!!!
Bluetooth problems
I am having the same problem with my JVC bluetooth unit BT1000. It will pair ok first time, allows me to make 2 calls. Will not the reestablish a connection/pairing. JVC worked fine with my sony erricson and nokia phones. Anyone found a cure to this?
Same problem with the stock AT&T rom (1.27.12.11) with the H700 headset.
Turn bluetooth on it normally sees the headset. If not turn it off and on again to get it to work. Once working it normal looses the connection after an hour or so.
Could it be a BT 2.0 Compliant issue?
I have posted this same problem earlier in xda-deveopers, on htc wiki and aximsite. Many people have viewed and are experiencing this same problem, but no one has posted any solution specific to my problem either. I hope a developer can solve this one for us. Is it a BT stack problem, or a BT 2.0 compliant problem, or a need for an updated ATT ROM to solve this issue? (I currently am using the stock ATT ROM 1.57.. that shipped with my Tilt.)
When I use my Motorola H700 with the Tilt the BT works fine, UNTIL, I use the voice speed dialing from the Tilt. Once I use the voice speed dialing directly on the Tilt, the Motorola H700 will no longer connect. I have to do a soft reset or go through the pairing process again. Once I re-establish pairing again, the H700 will continue to work fine, UNTIL, I use the voice speed dialing on the Tilt. Then we're back to having to do a soft reset to again establish H700 connection with the Tilt.
NOW, I just received a call back from an HTC tech who told me the problem is likely due to the Motorola H700 being only BT 1.2 compliant. He recommended that I try the Motorola H12, which is BT 2.0 compliant, but he could not absolutely guarantee this would solve my problem.
Does anyone know for SURE that the Motorola H12, being BT 2.0 compliant, will solve my problem? Or is there another solution?
Note: I have tried MS Voice Command 1.6 (full version), but the above problem still occurs. I have also tried Jetware, but again, no go. I am not sure that there is going to be an updated AT&T ROM to solve this issue either.
Additional Note: I have also tried other BT devices, such as the Jawbone, and the Plantronics Voyager. All do exactly the same thing as above.
Anyone have any solution? If the Motorola H12 is the solution, that would be great...
Thanks in advance.
I'm having the same problem with my new carkit. Did anyone ever find a solution to this??
Hi,
my Diamond works ok with my Parrot bluetooth car kit. The only thing that is really anoying me, it takes veeeery long until the Diamond has established the connection to the car kit. I have to drive for several minutes! until the Diamond connects. Before I had a Sony Ericcson phone where I did not have this problem.
Any ideas? Is this just because the Diamond is a WM phone?? Or is there a way to improve this?
Thanks
I use my diamond with a Parrot CK3300 - not sure if that is the same as yours. I only use it for handsfree since I use the Diamond's own GPS receiver. I don't have this problem - it picks up and pairs within seconds.
Have you flashed the Parrot with the latest software? I found that improved performance considerably - automatic update of contacts, user name on screen rather than phone name etc.
I use the Parrot CK3100 and the pick is almost instant; I've barely got in the car and started it up and the Parrot has picked up my Diamond. It was just as quick on my Hermes device too.
I also have a CK3100 and here's somewhat the same problem.
It connects in a few seconds, and it's usable.
But the synchronisation takes forever.....
That doesn't bother me, becouse I'm quite long in my car when driving to work...
But:
The phonebook in my CK3100 starts with the numbers wich are saved on the SIMcard.
All my friends are saved on the internal memory of the TD.
So if i want to call 'Anouk': I press 'A' on the CK3100.
It starts with the 'A' from the SIMcard.
Then I have to use the turning wheel, to scroll BACKwards to "anouk'!
So this takes a lot of time.... and is very, very unpracticle.
Someone a solution for this?
As I said before flashing the latest software onto my Parrot made it much better for syncing contacts. But I only need do it once - after that it only checks for changes. It should not be syncing each time because the Parrot should store the contacts itself.
Yep, just check the Parrot website to see what the latest update is for your particular BT device and try applying it. Saying that, I've not updated my one from factory.
Unfortunately I was not able to update my Parrot so far. I have only a CK3000 Evolution, Firmware version 5.08C. I guess I would need this special serial flash cable...
@ swissly
i have the same problems fw months ago. you have to delete the partnership's on your CK3000. press the red and the green button for more the 3 sec. (Erasing in progress) if this is done you can create a new partnership. hope that helps.
\\yoshi
swissly said:
Hi,
my Diamond works ok with my Parrot bluetooth car kit. The only thing that is really anoying me, it takes veeeery long until the Diamond has established the connection to the car kit. I have to drive for several minutes! until the Diamond connects. Before I had a Sony Ericcson phone where I did not have this problem.
Any ideas? Is this just because the Diamond is a WM phone?? Or is there a way to improve this?
Thanks
Click to expand...
Click to collapse
Hello
For all of you who have a Parrot Bluetooth car kit listen up:
When you use any phone with any Parrot Bluetooth car kits please go to the Parrot support website to flash your car kit - http://www.parrot.com/uk/support/onlinehelpguides
This will update the device with the latest firmware and as Parrot continuly add new phones to their list it is must. I did it as soon as my HTC Diamond arrived and finds it pairs/syncs within 1 - 3 seconds of switching the car on. FYI I have a Parrot MK6100 device, which supports A2DP Bluetooth audio and is mint. Previous to this I had an SPV M700 and a Parrot CK3100-something, but same thing - update it and you will find it solves the problem(s).
- PLEASE HOWEVER READ THE INSTRUCTIONS ON FLASHING - IT AIN'T HARD BUT READ IT ANYWAY!!! -
Please correct me if I'm wrong, but I still think I CANNOT UPDATE my Parrot CK3000 Evolution WITHOUT THE PARROT SERIAL CABLE!
swissly said:
Please correct me if I'm wrong, but I still think I CANNOT UPDATE my Parrot CK3000 Evolution WITHOUT THE PARROT SERIAL CABLE!
Click to expand...
Click to collapse
You are correct AFAIK. Most other Parrots can be updated easily using bluetooth, but not that one. Probably why it was cheaper than the others.
I have experienced few irritating problems with my Diamond when used in my Seat Leon 2008's stock head unit via bluetooth:
1. Phonebook is displayed always and I can call phones from there which is OK, however "Incoming Calls", "Outgoing Calls" and "Missed Calls" are not working always: sometimes I have those lists filled with the corresponding entries, sometimes all three lists are empty.
2. When I am running iGO8, the bluetooth connection gets connected and disconnected each 5 minutes or so.
3. The headset volume is really low. I didn't have that problem with my Sony Ericsson phones before.
Does anyone have any of those problems and know a solution for them?
Only thing i can say. Stock seat bluetooth is terrible. My brother has orderd a new seat and the dealer advised to choose for the pioneer mounted radio because of the known problems with the seat unit and the bluetooth functions of it.
try posting in the Accesories section, u might get more help.
marco899 said:
Only thing i can say. Stock seat bluetooth is terrible. My brother has orderd a new seat and the dealer advised to choose for the pioneer mounted radio because of the known problems with the seat unit and the bluetooth functions of it.
Click to expand...
Click to collapse
Pioneer isn't that good either, I had the Pioneer radio with Bluetooth and I couldn't get it running with my previous phone Trinity P3600 and with my Diamond it didn't work either.
Willem
I have used the stock head unit previously with simple mobile phones and it has always worked perfectly and I was very happy with the bluetooth implementation in Seat. So, I think the problem is not in the head unit (i.e. an accessory problem) but lies somewhere in the "phonebook through bluetooth" implementation in the Diamond.
Hello,
I have the same problem. I have a Skoda Octavia II (2007) with built-in bluetooth and a Diamond (ROM 2.03).
I use the iGO8, and it works fine, but the bluetooth connects and disconnects randomly in all ~5 minutes. When I shut down the iGO8 or when it runs on the background, the bluetooth works perfectly, when it runs in the foreground, the bluetooth disconnects again...
Who knows wat is this problem? Should I try a new ROM? A new radio version? A new iGO version?
CyberGene: Have you a solution for this problem? Or you use a different iGO8 or a different navi software?
Thanks,
DuckHead_
Unfortunately I didn't find any solution to the problem. To be honest, I am currently using a SonyEricsson phone and the Diamond is used by my girlfriend. We are still using iGo from within the Diamond but with no Bluetooth activated.
Thank you for the quick answer.
Why don't you just take your car into a car audio place and get them to check it out for you
I thought it so that the problem with Diamond. The BT does not work only if running the iGO...