I have the latest activesync but I cant connect to the internet through pie anymore. I heard there was a reg hack for this but cant find it.
Wifi works fine, but I want it to update my pocketweather whilst its sync'ing other stuff.
m623d said:
I have the latest activesync but I cant connect to the internet through pie anymore. I heard there was a reg hack for this but cant find it.
Wifi works fine, but I want it to update my pocketweather whilst its sync'ing other stuff.
Click to expand...
Click to collapse
when i am at home i have to put my connections on My Isp.. when i am at work due to the firewall i have to use Work Network.. and i can surf just fine through activesync
Depending on what ROM you have, check if it has a proxy setting in your Connections tab.
latest tmobile rom.
has proxy settings, but not set, shouldn't need to.
so no one else has a problem with the latest activesync?
I'm on T-Mobile USA and i'm not having any problems with ActiveSync (Version 4.2) and T-Mobile's latest 2.26 ROM.
Can you post more information about your setup, both PC and MDA? As it could be a configuration issue.
Activesync works fine, syncs all my stuff no probs. Just cant use the internet.
I thought you could just open pie and it would automatically connect?
Can't get to internet using activesync
I can sync, but cannot update pocketweather. Any ideas?
Same problem, internet doesn't work for me at all.
Gosh dunno why I'm having such a hard time with the internet working. On my first 8125 everything went fine, internet work with activesync and wi-fi without setting anything. But now I can't seem to get them to work at all with 2 newer 8125. Try Mr. Clean rom, Molski, summitter, format my computer. None was able to get my internet back? Can anyone tell me what setting did they put inorder to get thier internet thur activiesync and wi-fi.....thou I thought it should just automatically be the same as my comp ADSL ....like before, plug and away I can update weathers and surf net?
Anyone out there, got there internet working smoothly like I had in the first time?
might have the answer, worked for me.
Okay for anyone that is having problems with Internet working thur Activesync, you can try to go into start, setting, connections, usb to pc and uncheck enable advanced network functionality.
And it work for me, yahooooooooooo....
But what about eMail?
I have my TMO MDA set up for a Comcast eMail account. When I go GPRS, the eMail works fine.
But when I use Activesynch and my USB cable, I get "Cannot connect with current connection settings...."
Also, is there ANY way to have eMail give me the full message the first time, rather than requiring be me to click on the full message and reconnect?
g0dblissyou said:
Okay for anyone that is having problems with Internet working thur Activesync, you can try to go into start, setting, connections, usb to pc and uncheck enable advanced network functionality.
And it work for me, yahooooooooooo....
Click to expand...
Click to collapse
I've been having the sync without passthrough for about 2 months now.
Great. When I try to go into "USB To PC" the application basically crashes. Does anyone know the registry edit that would be needed to disable advanced network functionality?
-AnarchE
thanks!
I've had a sync issue and the issue where passthrough internet didn't work for 2 months. This little change fixed both.
Thanks.
g0dblissyou said:
Okay for anyone that is having problems with Internet working thur Activesync, you can try to go into start, setting, connections, usb to pc and uncheck enable advanced network functionality.
And it work for me, yahooooooooooo....
Click to expand...
Click to collapse
Also check Active sync, File -> Connection settings -> this computer is connected to: -> The Internet.
This did the trick for me, now it's updating perfectly.
Hi, I've had my Tilt for a while now, and I just updated to the new WM6.1 ROM this morning. However, after the upgrade, I could no longer get the wifi to work. I can connect to the wireless networks (tried different networks both open and secure), but when I try go to a website or use the internet, it just sits there and then says cannot connect. I have tried everything I can think of to fix the problem. I tell it to connect through work and through the internet, and messed with some other setting but that wouldn't do it. I plugged the tilt into activesync and it used the computer's connect just fine. Anyone having or had this issue, or have any suggestions?
Chris
Did you install the remove hidden proxy CAB?
If not, go here and get it:
http://www.4shared.com/dir/6996097/3f1f5d36/cabs.html
It's the removeHiddenProxy4CWS_0522 file
There may be others that do the same thing.
I installed the hidden proxy cab on my tilt, and the wi-fi still isn't working. Any other suggestions on fixing this problem. It's killing me. I though I'd be able to upgrade and reinstall all my files in just over an hour before I ran into this issue.
Update: Okay, I reverted back to the previous WM6 ROM and the wifi worked with absolutely no problem right off the bat. I don't understand what the issue could be and whether anyone else is having the problem. I'm going to try the WM6.1 ROM one more time, and then give up. I have to have wifi because I'm not willing to fork out money for a data plan. Any solutions or suggestions would be greatly appreciated.
change the power mode for the wireless mode to 'Best Performance'. This worked for me. Start -> Settings -> Connections -> wireless lan -> Power mode -> Best Performance.
Work Around For Wi-Fi Problem
I have found a work around for this and have tested on my "Tilt" which works 100% for the windows mobile 6.1 rom. On your device go to start, settings, connections then click on the connection icon then manage existing connections. Create on new setting on top of Media Net settings which you will have two connections. Name it Cingular GPRS, Enter Cingular GPRS, then Cellular Line (GPRS, 3G) for your modem, click next access point name wap.cingular, click next then User name [email protected], Password encrypted. The only thing you need to do is when using the internet & text messaging to have settings set on bullet mark Cingular GPRS. When using MMS only check check bullet mark for Medit Net and have proxy settings enabled at all times which will not affect your Wi-Fi connection to browser the internet once you switch back to Cingular GPRS in your settings. https://www.wireless.att.com/suppor...tutorialsCategory=MEdia+Net&tutorialId=614410
Park said:
I have found a work around for this and have tested on my "Tilt" which works 100% for the windows mobile 6.1 rom. On your device go to start, settings, connections then click on the connection icon then manage existing connections. Create on new setting on top of Media Net settings which you will have two connections. Name it Cingular GPRS, Enter Cingular GPRS, then Cellular Line (GPRS, 3G) for your modem, click next access point name wap.cingular, click next then User name [email protected], Password encrypted. The only thing you need to do is when using the internet & text messaging to have settings set on bullet mark Cingular GPRS. When using MMS only check check bullet mark for Medit Net and have proxy settings enabled at all times which will not affect your Wi-Fi connection to browser the internet once you switch back to Cingular GPRS in your settings. https://www.wireless.att.com/suppor...tutorialsCategory=MEdia+Net&tutorialId=614410
Click to expand...
Click to collapse
Hi, I tried you solution several times, but still could not get the problem fixed. I guess I am just resolved to going back to the WM6 ROM. Thanks for the info though.
@abhijitray: I already tried changing the power settings when I first began having problems, so that's not it.
i have the same problem with my Tilt. But i found that when i connect to my PC with the USB cable, ActiveSync is on, my IE works fine. With Wifi connection, IE is still dead.
maybe an off topic question, but what does the new rom have that the original rom that came with the tilt doesn't? anyone have a link or something, or is it something like better batter performance? thx
i have tilt with the latest official WM6.1 ROM, and have no issues with Wifi.
Ok - here's my story.
I had a default WM 6.0 Official ROM Tilt and upgraded to ATT's 6.1. Immediately my WiFi stopped working. I waited for updates on this thread, and with my temper rising at such a poor release, I decided to go to Dutty's 6.1 Hybrid. Same thing - Wi-Fi didn't work. (To qualify, it would connect and get an IP address, but any attempt to access the net - ping, ftp, Gmaps, Activesync - would fail) I upgraded to the latest eMo radio and still didn't work. I scratched my head and decided to check my router. It's an older D-Link 802.11b and sadly the last firmware was released in 2005. I changed the settings on it to not use Turbo mode and voila, it connected. All happy and such.
But now the problem is slightly different. It will connect once, but after it disconnects (either because I manually turned off WiFi on the phone or the phone entered Standby mode) I cannot connect again. I literally have to reboot my router. This is great a home, but I worry when I have to use a public wifi hotspot. Any thoughts on that?
And yes, I have played around with the power settings.
Kojak
another thing I have noticed on my router is that my Tilt is not sending a hostname along with the DHCP request. Could that be the issue on the WiFi connection? I am wondering if that confuses the router.
Tom
I have the same problem too. tytn II with latest rom. At home with my old linksys which is a 802.11b device. If i disconnect wifi and then try to connect - the phone say - Unavailable. I notice that if i change the channel the phone connect just fine.... very strange
ps. sorry for my bad eng.
pasole said:
I have the same problem too. tytn II with latest rom. At home with my old linksys which is a 802.11b device. If i disconnect wifi and then try to connect - the phone say - Unavailable. I notice that if i change the channel the phone connect just fine.... very strange
ps. sorry for my bad eng.
Click to expand...
Click to collapse
I see the same here - I think that by changing the channel it reboots/resets the router and allows you to try again.
ps. don't worry about your english. If this board was in a different language, I am sure that most people here would not even be able to post a thing.
kojak_nyc said:
Ok - here's my story.
I had a default WM 6.0 Official ROM Tilt and upgraded to ATT's 6.1. Immediately my WiFi stopped working. I waited for updates on this thread, and with my temper rising at such a poor release, I decided to go to Dutty's 6.1 Hybrid. Same thing - Wi-Fi didn't work. (To qualify, it would connect and get an IP address, but any attempt to access the net - ping, ftp, Gmaps, Activesync - would fail) I upgraded to the latest eMo radio and still didn't work. I scratched my head and decided to check my router. It's an older D-Link 802.11b and sadly the last firmware was released in 2005. I changed the settings on it to not use Turbo mode and voila, it connected. All happy and such.
But now the problem is slightly different. It will connect once, but after it disconnects (either because I manually turned off WiFi on the phone or the phone entered Standby mode) I cannot connect again. I literally have to reboot my router. This is great a home, but I worry when I have to use a public wifi hotspot. Any thoughts on that?
And yes, I have played around with the power settings.
Kojak
Click to expand...
Click to collapse
Well, your problem sounds exactly the same as mine (WM6.1 official). Maybe I should have tried a public hotspot, but it just wouldn't work on my home network (I even cut off the encryption and made it open). I downgraded back to WM6 ROM and everything working fine, so I guess no WM6.1 for me.
It is definite a router by router problem. Had problems with the D-Link but I tried it on a Buffalo 802.11g router running Tomato firmware, and I had absolutely no problems. That being said, this could be either a:
802.11b problem?
D-Link problem?
Something must have changed in the WM 6.1 code from WM6.0 as it pertains to WiFi. If only it was as easy as a toggle setting to fix.
For me, it was the opposite. I could get WiFi to work at my office on Mobile 6.0, but I couldn't get my network at home to work. I have a Wireless-N network at home, and even though I set it to B-G only mode, it still wouldn't connect. As soon as I hit WM6.1, everything was fine.
Unfortunately, this happens more than one would think with Wireless network equipment.
kojak_nyc said:
It is definite a router by router problem. Had problems with the D-Link but I tried it on a Buffalo 802.11g router running Tomato firmware, and I had absolutely no problems. That being said, this could be either a:
802.11b problem?
D-Link problem?
Something must have changed in the WM 6.1 code from WM6.0 as it pertains to WiFi. If only it was as easy as a toggle setting to fix.
Click to expand...
Click to collapse
Kojak_nyc,
You hit it on the head. It is a router issue, although its not limited to the D-Link router because I have a 2wire HomePortal 1000HW and it also doesn't work. It is also on 802.11b, so that could also be the issue. Something must have changed between in the settings the WM6 and the WM6.1 upgrade. I'll go ahead an inform HTC of the issue (not that they'll do anything).
I believe that the once the tilt is updated to WM6.1, it no longer works on IEEE 802.11b.
I think this is a Dlink issue. I've got a linksys router at home and it connects to that fairly quickly. ssid on that isn't hidden cuz i've got vista machines that have a hard time connecting.
anyway, at work i've got a dlink di624, 802.11g, router and i've not been able to connect the kaiser to it. i think tomorrow i'll do what was suggested and just play around with the channels and find which works. the dlink's set to automatically choose the channel it uses so i'll hard code it for a channel i know the kaiser'll scan for and then see what happens.
if it doesn't work i'll juts keep using the 3g connection... i do have 6GB/mo and haven't come anywhere near using it up.
Experienced similar problem just now. I just upgraded to WM 6.1 and my WiFi connection's been unstable since last night. I have a wireless router with excellent signal on my room and enjoys streaming video before I upgraded to WM 6.1. When I reset the phone it restored WiFi connection again.
Hope you could share some tweaks to resolve this problem.
Thanks.
hello there,
When I try to run messenger with only the normal phone radio active G (not 3G) it doesnt work. When I plug in my USBcable, it also works. It also works over WLan. (wich I guess is WiFI)
Im on the Dutch 1.93 Rom. Msn Version: 10.6.0039.1300
bump
still haven't figured it out..
i'm in the opposite boat... cant get it to work over wifi...
stupid thing... i can browse net using opera / IE but it tries to use GPRS when i have a good wifi connection!!!
Newer Windows Live always tries to connect using your default Internet Connection even when you are already online. To solve this, you need to go to:
Start->Settings->Connections->Advanced->Select Networks. Change everything to My Work Network.
With this, Windows Live won't try to connect when you have active internet connection. The problem now is, if you have no active internet connection, it will force your device to connect to your gprs/3g but will fail to work. You will need to reset the setting above to your gprs/3g connection.
Hi folks, just got my diamond almost a week ago and I already filled it up with applications, absolutely love it's wide area of functions. I came across a great idea that i could use at work: to connect the phone through activesync(that will give me internet on the phone from the computer) and then to use wifirouter app to further share this internet connection. But I couldn't get this working, because wifirouter accesses my gsm/3g internet on the phone instead of the internet obtained from the computer through activesync. Anyone got an idea how to get this working?
when u connect your phone with usb u can choose : shared internet connection. maybe then it will works dnoo
I don't think you understood, I need internet forwarding from pc to phone firstly, which I managed to do already with activesync, but I also want wifirouter application to recognize the internet being sent from the pc through activesync and not connect to edge/3g.
I think u need to setup your wifi router again this time dont set it to gprs/3g select usb to wifi. That shld work it
The wifirouter application doesnt give me any options, it just initializes and thats it.
can anyone help?
Using the USB to Wifi mode should work in this instance. That is if you're using one of the paid versions as I'm not sure if the free version supported this.
Hi everyone.
I have a question concerning the Wifi.
Although I can connect to my Wifi router, I can't go on internet using Opera.
Is there a special option to activate ? Because I tried almost everything on the phone but nothing works.
Thanks for your help.
I changed my rom (unfortunatly, I don't know which one I have, a friend did it for me) but I don't think it matters since I can connect to my router.
romaik said:
Hi everyone.
I have a question concerning the Wifi.
Although I can connect to my Wifi router, I can't go on internet using Opera.
Is there a special option to activate ? Because I tried almost everything on the phone but nothing works.
Thanks for your help.
I changed my rom (unfortunatly, I don't know which one I have, a friend did it for me) but I don't think it matters since I can connect to my router.
Click to expand...
Click to collapse
Wifi, try this: Settings->Connections->wlan->powermode: turn it to best performance
How to know which rom you have: At the bootscreen the bottom text OR Settings->System->Device Information: ExtRom version: **
If you are sure WiFi is working (for example you could try to connect your PC with Total Commander) check:
Settings -> Connections -> Connections -> Advanced -> Select Networks -> Programs that automatically connect to the Internet should connect using:
I have: "My work network" here and Opera utilizes this connection with no problems.
Good luck.