I just tried using ShellTool to install the flash Xplore onto my phone, it's a G4, CID locked. But, when ShellTool reported that it was done, I went to unplug my phone and hard reset it, but I accidentally held one wrong button, and put it into bootloader mode. Then, I realized what I had done, then hard restarted it the right way, and now all that comes up is the initial boot screen, with the new OS listed as 10.2.0.8, but it just stays there.
What do you think?
i think if you can get your wizard into bootloader then you dont have a brick. Please try to put your phone into bootloader mode then flash wizard love or your carriers rom. Then you can attempt shell tool again
Doesn't the phone have to be CID unlocked to flash the Love ROM with RUU? I have Wizard Love 2.26 10.2 WWE Novii CF2, will that work with my G4 device since it is CID locked?
My device is cid-locked G4 and wizard love worked fine flashing from RUU, so did my carriers rom.
http://forum.xda-developers.com/showthread.php?t=298613
here is a tutorial that may help you.
Good luck.
Related
Hi all,
I'm trying to upgrade from Molski 2.26 to WM6 and now I am stuck on bootloader mode. Since I'm in bootloader mode, activesync is not seeing my device. Because of that, I can't even load any other rom images, the upgrade utility simply quits because of that. Can anyone help? Thanks.
IPL/SPL 2.26 --> G3
since your stuck in bootloader mode activesync won't be active. When you are in the bootloader screen, hook up your usb to you wizard. There look in the bottom left corner you will/should see usb displayed there. Once you can confirm that, run the RUU and flash an OFFICIAL CARRIER ROM. After that try flashing wm6 again. hope that helps you out. To find official carrier rom look in some of the stickies they should links for you.
Hi,
I also have a T-Mobile MDA, and I got stuck at the bootloader screen. I tried flashing Wizard Love ROM, but it doesnt flash either. I bought the phone from ebay, and I'm not in the US. When I try to download the TMobile ROM, it asks me for a valid TMobile phone number, which I dont have.
Is there any other place where I can get the TMobile ROM to flash on the phone?
I dont get it. If you're stuck in bootloader, just connect the usb cable and run official RUU.
Cheers,
vlodeck.
vlodeck said:
I dont get it. If you're stuck in bootloader, just connect the usb cable and run official RUU.
Cheers,
vlodeck.
Click to expand...
Click to collapse
Not being a customer of TMobile, I cant download the official ROM update from the TMobile website, cause they require a TMobile number in order to download the ROM
This should help you out <----- hope that helps you out latest t-mobile mda rom ipl/spl 2.26
Hi people. I have updated my Wizard with wm6, and it works great for weeks. Today, i have to reinstall the rom because one error... I installed that correctly but the ppc turns on and shows: HTC IPL:2.18, SPL:2.18... And dont go on! I can access to bootloader mode, but nothing it all. What i should do?
It is possible that you didn't unlock properly before flashing.
If you CID unlocked your Wizard when IPL is 2.18, then it is NOT unlocked. Follow the unlocking stickies in this forum and use Button's 1.05 ROM to unlock again.
If you are sure that you unlocked CID in IPL 1.xx, then just start RUU in bootloader mode and everything should be fine (You may need to disable USB connection in ActiveSync for RUU through bootloader to work properly)
He can't do that. Phone doesn't go past the bootloader and is indeed CID locked and also doesn't accept any flash.
But then again, button rom might do the trick...
No, my Wizard used to be the same situation. As soon as IPL not upgraded to 3.08, there is a high possibility to flash Button's 1.05 ROM into the device without problems.
Problem solved! I downloaded a ROM from here, whitch downgraded my IPL and installed WM5.. Now im waiting for the orders of mestrini
I have a 8125 G4 sim unlocked w lokiwiz and a flashed WMSE5_rev4 with soft spl, well the problem that i have now is that i recentley tried to flash a new wm6 rom without hard spl ( yeah i know stupid) And now i am stuck on tri color boatloader screen no matter if i turn it off or not still goes back to the same thing. and yes the rom that i was flashing was g safe, i think were i messed up is not CID unlocking it with hard spl?when i tried to flash the new rom it went all the way to 100% and then gave error after that. NO activesync connection right now
questions
1- DID I BRICK IT
2- is there a way to recover this device
nothing at all?
AHHH man exactly the same thing just happened to me please some one help us and tell us there us a way to fix it
Download the official carrier's Rom and flash in the tricolor screen or you can even try with wizard_love rom,it usually works with a G4 device.Activesync will not connect in bootloaders (tricolor screen).If you had not got your phone 'HardSPL' then always do the flashing through 'SoftSPL',cuz after flashing with 'SoftSPL',it only patches or tricks the device to think its CID unlock,which is temporary and as soon as you Soft Reset the phone,it goes back to its original ipl/spl and into cid locked situation,therefore,each time to flash,it has to be used again.
Cheers!
ok so after reading many many times and attempting to flash to 1.05 which worked but i was never able to upgrade. I used the shell tool to try and get XM6R5 to flash and it locked up. since then the phone now starts to boot but locks in on the button rom (from button with love) and shows
IPL 1.05
SPL 3.08
GSM 01.12.10
OS 1.5.4.2
After sitting on this bootup screen for over a minute the picture looks shaky??
So i attempted to reflash to 1.05 again and it goes all the way to 100% and tells me successful and reboots then locks up! So i try to flash back to Tmobile rom and i get a 296 error: ERROR {296} : UPGRADE ONLY This NBF file cannot be used for your PDA phone. please get new NBF file.
The usb and active sync wont work either.
I even held the comm and voice button and pushed reset and tried to format and it says format failed.
Please help, i now wish i never attempted to flash to WM6. This is a brand new replacement MDA and i figured i would attempt to upgrade it before i did anything and now it seems locked!
ok,as long as it gets stuck at the loading splash screen of button's rom,it ain't dead yet.
First,how did you get SPL 3,08 ?,did you flash the ipl/spl 3.08 before flashing the button's rom 1,05 ?
Secondly,There was no need to upgrade with 'Shell Tool',after downgrading to ipl/spl 1.xx by button's rom,you shud have used 'lokiwiz02b' to SIM/CID unlock the phone and upgraded to any wm6 Rom.Try to get the phone in bootloaders mode(Tricolor screen),if it gets there,download the official carrier's rom of your phone from its website and flash it in the bootloaders to bring the phone back to its default status.After that downgrade with button's rom 1.05 and SIM/CID unlock your phone with 'lokiwiz02b' and upgrade to wm6.
its very hard to brick it fortunatly
let us know if you succeeded , it might help others
I flashed to 1.05, then tried tmobile 2.26, once i did that i upgraded to 3.08 which made ipl/spl 3.08. I tried several times to reflash to 1.05 again and the ipl changed back but the spl stays at 3.08. I have flashed several times to 1.05 and the spl will not change from 3.08(how can i make it do this) So now that the 3.08 is stuck there the original tmobile rom wont install and it gives me a 296 error when attempted.
I have taken the battery out and gotten into bootloader on reboot however, when i flash to 1.05 or tmobile and it goes thru the cycle... once it gets to 100%(I also get the pop up that says upgrade successful and hit ok) the phone reboots and then gets stuck again in the splash screen?!?! then the screen gets shaky looking as well?
oh and i used the shell tool because everytime i downloaded the button rom the ipl only changed to 1.05 the spl would never change from 2.26 to 1.05 and i tried several times to flash. then using lokiwiz2b it would NEVER unlock the phone. Kept giving me an internal error. Maybe because the extracting of lokiwiz automatically would open the program when i downloaded in mozilla firefox? is this IE use only maybe?
So anyhow i thot shell tool would be best to use since i couldnt unlock it. Guesss not.
I wish one of you guys lived right down the street so we could do this together or maybe i just call one of you geniouses
mjakaz78 said:
oh and i used the shell tool because everytime i downloaded the button rom the ipl only changed to 1.05 the spl would never change from 2.26 to 1.05 and i tried several times to flash. then using lokiwiz2b it would NEVER unlock the phone. Kept giving me an internal error. Maybe because the extracting of lokiwiz automatically would open the program when i downloaded in mozilla firefox? is this IE use only maybe?
So anyhow i thot shell tool would be best to use since i couldnt unlock it. Guesss not.
I wish one of you guys lived right down the street so we could do this together or maybe i just call one of you geniouses
Click to expand...
Click to collapse
hmmmm, thats the mistake.After downgrading to ipl/spl 1.xx after flashing button's 1.05,you shud have first sim/cid unlocked the phone and then flashed t-mobile 2,26 to upgrade to ipl/spl 2.xx.Then shud have upgraded to any wm6 roms,upgrading to ipl/spl 3.08 is not at all necessary for upgrading to wm6,but an option,where as,ipl/spl 2.xx is only required for wm6 upgrading.
You,instead,of getting your phone sim/cid unlocked,flashed and upgraded to 3.08,but to sim/cid unlock,its required to have 1.xx,now it won't downgrade to 1.xx with button's rom.Its very commonly observed that after upgrading to 3.08 without getting the phone sim/cid unlocked,it becomes a pain in a** to downgrade to 1.xx and unlock.Now its a catch22 situation,where it doesn't downgrade to 1.xx for unlocking and nor accepting any other rom flash,its stuck at splash screen at 3.08.
Now,the only solution is to get the phone back to its default status.Try to flash either official stock rom,button's rom,if button's don't work,try the xda_minis_launch rom or the wizard_love_rom in the bootloaders mode.You got to keep your patience and it might take several flashes with either of these roms to get through.
Good luck !!!
thank you, im going to attempt all this now, ill keep everyone posted!
ok heres the scoop...
ive tried the tmobile official rom 2.26 upgrade and the xda_minis_launch rom and the wizard_love_rom (Love rom seems to be in a foreign language and gives a error 300) in the bootloaders mode and every time it will refuse to read the usb and gives me either a 264 or 296 error with these roms. Not sure why the phone says its not connected for the above roms but will read buttons rom still saying its not connected
The only rom that seems to read for whatever reason is buttons rom and i have flashed it 5 times at least now and always tells me it works but then gets stuck in bootloader with a glass of beer and the same ipl-1.01 spl- 3.08 gsm- 01.12.10 os- 1.5.4.2
so i dont know what to do!! there must be someway to get this thing to work!
Yes ! I understand it sometimes becomes very annoying and frustrating,but you got to keep cool. believe me and I can assure you there's nothing wrong with your phone as long as it can get into bootloaders.It's just that the bootloaders have got corrupted and stuck on spl 3.08,its only spl 3.08 which is creating all the problem,untill and unless it doesn't downgrade to either spl 1.xx or 2.xx,it'll not be possible to flash any other rom.now the only way to get the bootloaders corrected is to flash any official rom to bring both ipl/spl to 1.xx or 2.xx.
ok,when you get the phone in bootloaders and connect the phone via usb,does a small usb appear at the bottom of the bootloaders screen ? forget about the activesync for a while,cuz activesync doesn't work or get connected in bootloaders.The only way to verify if the phone has established connectivity with the pc is to verify if usb appears in the bootloaders.Rather I'll suggest you to delete the partnership with pc in activesync and uncheck the option 'allow usb connections' in the Async.If its verified that usb appears and has connection in bootloaders then you are good to go and run RUU,but if there's a problem and it doesn't show in bootloaders then your usb is not establishing proper connection.In that case,either the usb cable is faulty or the mini usb port of the phone is damaged.Check and verify this.
Secondly,lets try to flash the Rom with replaced RUU like 'RomUpdateUtility_wizard_Noid', or 'newromupdateutility_wizard_noid' or 'Ruu_Mun',you can find them in the forum.Either copy and replace it with ruu in the rom or copy and past 'nk_nbf' in the rom to the folder of these RUU and try to flash in the bootloaders,but first confirm the connectivity of the phone via usb as explained above. Hope this might do the trick,lets hope so!!!
Cheers!
I had a same problem like you. Here is the solution: http://forum.xda-developers.com/showthread.php?t=276963
not my idea. Works great. Martin
maty said:
I had a same problem like you. Here is the solution: http://forum.xda-developers.com/showthread.php?t=276963
not my idea. Works great. Martin
Click to expand...
Click to collapse
ok,was your phone CID unlocked when you did back up with sdcard using 'Mtty' program ? cuz its not possible to go through recovering back by this method if the phone is CID locked,the rom will not back up to sdcard,it'll give error.Here his phone is still Cid locked and he has upgraded to 3.08,now it won't let him downgrade to ipl/spl 1.xx to use lokiwiz02b and SIM/CID unlock his phone.
Cheers!
ok here is the problem im having now. ANY ROM i attempt to flash to in bootloaders mode or 3 colored screen WILL NOT WORK! it gives me a 264 error on any of them besides button rom. I have tried several times to upload tmobiles official rom and it tells me i have to get a newer nbf file!
I pop the battery out and wait a few seconds and then hold camera button and power, (now in bootloaders) i then plug in usb and the USB letters do show on the bottom left hand side. I also disabled allow usb connection on active sync.
i wish i understood why no other rom except buttons will flash? even muns ruu wont work, it gives me a 300 error invalid update tool!
format is failed after a power outage in the middle of ugrading with shell tool.
made it worse bu trying to flash with tmobiles latest rom.
so now i'm stuck in boot screen with the following
Device is g3 with
IPL 3.08
SPL 3:08
GSM 02.69.11
OS 3.8.2.1
did i mention CID unlocked?
please advice
rephrase
Let me rephrase the question.
I have a friend who saw me use shell tool to upgrade my cid locked wizard.
He went home to try the same on his cid locked g3 wizard.
he had bad luck and it was interrupted mid way through so he brought me his dead wizard.(stuck on bootloader)
The only official rom i had was Tmobile's 3.08 so i flashed it to try and revive it.
it flashed and finished but still stuck on bootloader.
when i try and hard reset it says "format is failed".
button rom wont work, wizard love wont work, sd method wont work as it is cid locked.
Any ideas?
And if none, will imei-check work..
Get the official stock ROM for his Wizard, then flash it and you will get a working Wizard back.
However, if the IPL and SPL still stays at 3.08, there is possibility that IPL and SPL not downgradeable, so unlocking may not be possible.
Another thing...by CID unlocking the Wizard, there is no reason to use ShellTool while you can actually use RUU directly! Using ShellTool may lead to incomplete update!
Not yet home
Hey, the stock rom (tmobile 3.08) succesfully flashes but the wizard still doesnt boot. it gets stuck on the first screen.
Any more ideas?
BTW i'm very experimental so i'll try anything..
Hi,
Have you tried to flash the wizard with Hard-SPL or Soft-SPL.
I had the same with mine wizard (G4) but Hard-SPL worked for me.
You have a G3 so I don't no if it will work. Otherwise read this thread first post
Hope it will work.
Peter
pd2903 said:
Hi,
Have you tried to flash the wizard with Hard-SPL or Soft-SPL.
I had the same with mine wizard (G4) but Hard-SPL worked for me.
You have a G3 so I don't no if it will work. Otherwise read this thread first post
Hope it will work.
Peter
Click to expand...
Click to collapse
Both solutions advised require WinCE to boot to be applied... which isn't the case here
hey
mestrini said:
Both solutions advised require WinCE to boot to be applied... which isn't the case here
Click to expand...
Click to collapse
So mestrini,
What to do??
will imei-check work?
And what exactly is format is failed?
Try this thread http://forum.xda-developers.com/showthread.php?t=298613
This worked for a friend of mine. he has a G3.
Peter