I've recently got on Xplore 1.1 and started upgrading my phone. By the looks of it, an O2 XDA Trion seems to be unlikely (availability and also some new developments) to reach my hands. I am considering getting a replacement fascia from eBay but am not sure which I should get and why. My phone works very well with the exception that the stylus is falling out (fixed temporarily by using the paper bag trick) and a few falls left the fascia chipped and scratched. The primary D-pad,call keys and soft keys seem a little dirty but they don't look too bad.
I am looking at this full housing which is at 40 pounds, and this A-grade (does this mean brand new or what?) housing without the d-pad and surrounding keys for almost 30 pounds.
Truthfully, I don't want to spend a lot but I am hesitant to send my device back as it works a treat (ht545 G3 unit so I doubt 4GB SD works but I never actually filled an entire GB so at worst I might get a San Disk High Speed 2GB mini SD later on). I am also intending to obtain a full Invisible shield for the wizard as it seems to be damn near impossible to find a black silicone case for the wizard (without the unbreakable screen cover; I just want to slap on a brando protector like the one I have on now).
So which of those two should I get and what the hell is A-grade?
I Bought a dummy wizard phone for 10$,
It worked just fine, all the part are exctly the same....
(i bought it from ebay , so try to have a look....)
good luck
Tom
Well that's a great idea but what do you call them exactly? I can't find such things?
AsGF2MX said:
Well that's a great idea but what do you call them exactly? I can't find such things?
Click to expand...
Click to collapse
Yep they are called exactly that - Dummy Phones
Granted this is on the ebay us site, but it may help you out. They are cheap so maybe it would be less een with shipping than buying from a shop in the uk.
http://search.ebay.com/search/search.dll?from=R40&satitle=mda+dummy&category0=
jimmymotek said:
I Bought a dummy wizard phone for 10$,
It worked just fine, all the part are exctly the same....
(i bought it from ebay , so try to have a look....)
good luck
Tom
Click to expand...
Click to collapse
Good idea but I think the housing of a dummy is glued. If not, then i would be interested on buying a HTC Wizard dummy (I dont like the cingular )
WizeMan said:
Good idea but I think the housing of a dummy is glued. If not, then i would be interested on buying a HTC Wizard dummy (I dont like the cingular )
Click to expand...
Click to collapse
I bought a dummy phone thinking I'd be able to use the housing. Unfortunately I was wrong. There are numerous reasons why the one I've got wouldn't work: it's glued, but buttons don't all work, the mini-SD slot isn't cut through, etc.
If anyone would like the one I wasted my money on and you're willing to pay postage let me know.
Well, this morning I was searching for dummy phones and the only one I found was in Germany for around 30 Euros...thanks for the heads up that it won't work; you just save me from a major headache.
So once again, it boils down to the question which of those two I originally linked would be worth it (I sure as hell have no idea what A-grade means...should I ask the seller or...)?
A-Grade probably means premium quality...
WizeMan said:
A-Grade probably means premium quality...
Click to expand...
Click to collapse
Well that item is actually gone and I found these two off eBay as well...
this for around 28 pounds - original O2 Housing (says "EXCELLENT CONDITION ALL ROUND. LIKE BRAND NEW" so probably not brand new).
this for around 29 pounds which looks like a fake or at least is missing the O2 logo and is said to be 95% new (What's that mean?)
I don't have a T6 which the second one comes with and the first guy will throw in for an extra 2.99 - making both approximately the same price. So is the saving of 10 pounds, when compared with the brand new housing listed earlier, worth it?
Also found this keypad (d pad, soft key, call key and email) for another 10 pounds almost but as I only have one little ding...I doubt I need it.
EDIT: After a lot of thought, I am going to order from the guy above who has the XDA mini S cover (with O2 logo) and toss in 2.99 for the T6 screw driver as well). I am also going to get the black silicone case with that unbreakable cover. I just hope I'm making a good investment. As all in all, it'll cost me around 40 pounds (with the protector and all).
Now the only thing bugging me is how do I transfer the stickers and warranty labels cleanly?
Related
Hi,
My XDA fell out of my top pocket the other day and has now got a big dent in the cover. Can anyone tell me where I might buy a replacement cover preferably in the UK without having to send it away to O2 and be charged £75 for the privilage?
Spare O2 cover
Hi there,
I have an almost new 02 frontcover for you.
All the buttons in place of course.
Would this help?
Best regards,
Murk
Murk,
Thanks for the reply, but the whole case is a bit sad now, so I am really after a complete new (or as-new) case.
If you don't mind having it look like the T-Mobile XDA, just browse eBay and look for a Dummy T-Mobile XDA ($10-15US). Then take the dummy apart and your existing XDA and eventually swap the cases (front & back).
It takes a little bit of time taking it apart and transferring the mic/speaker/vibrate device/battery - but it's easy, just have to be careful and smooth.
Also, some folks say that the dummy phones are cheap plastic.... well, the case is identical to the original T-Mobile XDA so dispell that myth.
I just did this 'operation' myself today and now have a brand new looking XDA (I had the infamous paint peeling case. Couldn't get it replaced since I had it RAM upgraded).
Front and Backcover
Hee Angus,
It seems my first relpy did not make it.
I have a complete case for you.
I would prefer to hold on the backcover as the battery is in there.
But if you want it I could provide them to you with or without the
battery. :lol:
Let me know.
Best regards,
Murk
Do have a spare vibration motor? I really need one, mine broke.
Hi
Has anyone seen a black casing for the kaiser, the plastic which has htc written on, i want the front to be black rather than grey.
I'm thinking of getting replacement plastics for it, its in terrible cosmetic condition.
Thanks
Is this wat you're looking for?
Searching for housing instead of casing did the job for me.
http://www.cellulardr.com/TILTHOUSING.htm
ARBSM said:
Is this wat you're looking for?
Searching for housing instead of casing did the job for me.
http://www.cellulardr.com/TILTHOUSING.htm
Click to expand...
Click to collapse
That one shows a grey/silver front in the picture.
Other than some unofficial knockoff from some place in China, via Ebay (which looked really badly produced), I haven't seen any other all black housings around. There is always the option to use the all black aluminium case of course, which makes it even thicker.
http://cgi.ebay.com.my/ws/eBayISAPI.dll?ViewItem&item=220436581216
search on ebay. they have available parts for shipping that are way cheaper than the ones on the site posted earlier.
I've been searching for a while, i've tried ebay but i've never found anything apart from the original grey front
I've found vinyl stickers, maybe i can find a black one
Newbie16 said:
I've been searching for a while, i've tried ebay but i've never found anything apart from the original grey front
I've found vinyl stickers, maybe i can find a black one
Click to expand...
Click to collapse
Most people are searching for replacement parts. There are very few " customized " parts for these phones, as they are $500 disposable items. There is no market for customizing something that is going to be yesterday's technology in less than a year.
denco7 said:
Most people are searching for replacement parts. There are very few " customized " parts for these phones, as they are $500 disposable items. There is no market for customizing something that is going to be yesterday's technology in less than a year.
Click to expand...
Click to collapse
i beg to differ..when it comes to technology of these mobiles, oppose to cosmetics and maybe software,..it's more like every 3 years. Now, as technology progresses so will the speed of advancement. The kaiser is 2006 Technology, and just now are we seeing truely new chipsets (not just a smaller chip and bump to 528 mhz) like most modern android phones today oppose to our device. So we are currently on the wave of new mobile technology..so in a way ur right and wrong, it looks like the next year or so will be wat you said especially if you just bought a phone..and for some one like me who has had a kaiser for couple years it will be nothing but a routine upgrade
Does anyone know how much HTC UK charge to replace the housing (not the screen or battery cover) of a HD2?
I would like to get mine changed but HTC UK want me to send in the phone before they will give an price!
Ouch! I hope you like the results... I'm curious about the price of that too. It's a bit early, but you might find a parts-only phone with a smashed screen or something and a suitable body.
go to truesuppliers webpage they have them for 80.00
brokendojca said:
go to truesuppliers webpage they have them for 80.00
Click to expand...
Click to collapse
Do a google search before you buy there. I've read they sell cheap/poor quality stuff.
Looking too now. Mine has developed a crack that has spread from the battery slot to the edge of the screen.
i rang htc uk last friday asking about this. they said they could pick up the device next day. repair time would be 10 days. cost to replace all plastics (by this i assume they mean the main housing/battery cover. possibly the main body of the phone as well) £65. probably best to call them yourself to check that price. they said they would be in touch to let me know the price when the damage had been assessed by an engineer.
i didnt bother with this as my housing only has superficial damage so went looking for a good replacement. got one on order now. when it comes i'll post up a pic. check my thread for updates. http://forum.xda-developers.com/showthread.php?t=851273
Can anyone tell me what the best case would be for my HD2, besides an otterbox?
I have the US version of the phone which is longer than the European..
And I have searched everywhere, and I am pretty sure that I read that they stopped making otterboxes for these because everywhere is sold out (I can't even find any on Ebay or Amazon!).
I had my phone for a week and it fell out of my pocket onto my driveway and the screen cracked like a spider web.. So now I have to spend about $150 to get the screen replaced, and I am not willing to do so unless I can get a secure case for it..
Any suggestions?
RedRobster said:
Can anyone tell me what the best case would be for my HD2, besides an otterbox?
I have the US version of the phone which is longer than the European..
And I have searched everywhere, and I am pretty sure that I read that they stopped making otterboxes for these because everywhere is sold out (I can't even find any on Ebay or Amazon!).
I had my phone for a week and it fell out of my pocket onto my driveway and the screen cracked like a spider web.. So now I have to spend about $150 to get the screen replaced, and I am not willing to do so unless I can get a secure case for it..
Any suggestions?
Click to expand...
Click to collapse
This should probably be in the 'HD2 Accessories' section, you'll get more info there I guess. I personally use the leather HTC pouch which came free with my phone, and it works extremely well! I've had the phone for a year and not a single scratch on it even though it's constantly in contact with my keys and stuff.
Piel Frama (http://www.pielframa.com/htc-touch-hd-2-imagnum-tan-cases.htm)
I think it's the best!
Sorry, I didn't realize that there was a forum for HD2 accessories...
But those leather cases are more like pouches, right? As in, you still have to pull the phone out to use it, and its more of just a carrying case?
I am looking for something like an OtterBox, with maximum protection and is always on the phone
RedRobster said:
Sorry, I didn't realize that there was a forum for HD2 accessories...
But those leather cases are more like pouches, right? As in, you still have to pull the phone out to use it, and its more of just a carrying case?
I am looking for something like an OtterBox, with maximum protection and is always on the phone
Click to expand...
Click to collapse
Oh right, yeah they are but I personally don't find it much trouble. I think there may be one which is more like the otterbox one as well (by HTC) so try it, the leather gives a nice high quality feeling
The Otterbox Defender is a good case, as long as you don't need to get the phone in and out of the case.
It is two pieces, a silicone rubber case, then a hard plastic shell. If you need to change the battery or reboot the phone by pulling the battery, there is a good chance the plastic shell will split or break.
I've been through two of those cases. The first one Otterbox customer service (very nice FWIW) sent me a new one under warranty. After the second one cracked I just didn't bother. Even cracked it protects the phone pretty well.
There just aren't that many cases for the HD2 since every other day HTC comes out with a new phone.
Nigeldg said:
Oh right, yeah they are but I personally don't find it much trouble. I think there may be one which is more like the otterbox one as well (by HTC) so try it, the leather gives a nice high quality feeling
Click to expand...
Click to collapse
Found the one I meant, it's here and it seems alright, although I've never used it before.
What about one of these?
http: // smart phone pedia. com/pdair-aluminum-metal-case-open-screen-design-1-2-3-4-5-6-7-8-9-10-11.html
You think they would be effective?
P.S. - I am a new user, so I can't post URL's, so remove spaces
moved
I prefer to take the phone out for use. I've had the HD2 since release and always go back to the original case as supplied with the HD2:
http://www.amazon.co.uk/GENUINE-HTC-CARRY-POUCH-T8585/dp/B002XSBLY6/ref=dp_cp_ob_ce_title_2
Haha yeah, see my problem is that I will take it out, but never put it back in...
Boxwave corsa moda case are next best to otterbox, i'm using one.for Tmous hd2 ,you can get it for $19 they have two type of case,book type & flip type,I'm using the flip type..hope it helps
I have a otterbox defender for tmo US HD2 in like-new condition I rarely use & would be open to selling or trading for the right offer. i didn't realize how rare these are now... I've checked ebay several times over the last couple months trying to see what they sell for, but i haven't seen a single one up there!
Id love to trade for a 64gb sandisk microsdxc if anyone would be willing... Id ofcourse put in something else or cash on top of the case to make it fair. any interest, pm me an offer.
Sent from my SAMSUNG-SGH-I717 using xda premium
THAAAAANX
I'm using Capdase Cap for Hd2. Google it. I recommend that one.
zarathustrax said:
I have a otterbox defender for tmo US HD2 in like-new condition I rarely use & would be open to selling or trading for the right offer. i didn't realize how rare these are now... I've checked ebay several times over the last couple months trying to see what they sell for, but i haven't seen a single one up there!
Id love to trade for a 64gb sandisk microsdxc if anyone would be willing... Id ofcourse put in something else or cash on top of the case to make it fair. any interest, pm me an offer.
Click to expand...
Click to collapse
I've come across them on ebay every once in awhile but your right, they can be very hard to find even on other websites as well. And then most of the times when you do find them its for the international model which i believe wont fit the US version. I've had some luck with other ebay countries that ship to the US but thats really hit and miss.
A new 64gb sandisk microsdxc will set you back around $95-$135 and a new otterbox would cost around $40-$50 and thats if you can even find it which would be difficult to say the less. I read some reviews of people who didn't like theirs but most seem quite happy with it. Considering that they are hard to find his offer isn't really to high priced especially considering he offered to add money towards the trade. About two months ago I seen a used one go for like $40 on ebay if i remember correctly but then again one sold for only $13 w/ free shipping a couple weeks ago. You can see that here. Worth way more then $13 though, who ever got a steal on that.
Considering our phone has Cornings Gorilla Glass I think there is really no need to go all out. Get a nice full body screen protector such as clear-coat found here and put it in a fairly nice...but not break your bank account nice case. Something around $10 should do. Clear-coat normally has sales/coupons going on so if you do go that route try to look one up. I've had mine in a cheap $5 case since i bought it just after they came out and have even dropped it a few times, luckily my phone still looks like its in mint condition.
Yeah, I didn't mean that I'd only trade it for a 64gb microSD... if anyone wants to make any offer, I'd consider it. I already have a Noreve leather case that I use for my HD2, and I've rarely used the otterbox case, so I figure there's no reason for me to hang on to it.
Sent from my SAMSUNG-SGH-I717 using xda premium
For me best case is no case, never found one I really liked & all made fone too big or loose quality feel & look ...
powerhd2 said:
I found this case, looks nice
http://dx-box.com/soft-jacket-2-xpose-silicone-case-screen-protector-for-htc-touch-hd-2-capdase.html
Another one
Click to expand...
Click to collapse
I have this one and its probably one of the nicer cases I've used.
35-60 bucks go to fortte.com they have good ones. And they customize it if u input directions. Like they'll add straps and stuff.
Sent from my NexusHD2 using xda app-developers app
In a nutshell I have this today:
It's my first day with my phone. I cannot use any case because in my country (Turkey) it's impossible to find any cases. I bought some but they will be delivered at least 1 month ago.
So is there any-where to find a replacement part for my back cover? I asked it to Oneplus itself but they told me that they don't sell spare parts. I looked into ebay but there's not any of it.
I know it's not a big thing but I have a big OCD problem. And it looks like a disaster to me.
ANy help will be appreciated.
I've seen many parts on eBay for OnePlus 3 but no replacement back cover yet. They have everything else though like front glass, vibration motor, battery, antenna, speaker, camera cable.
kamajikaciya said:
In a nutshell I have this today:
It's my first day with my phone. I cannot use any case because in my country (Turkey) it's impossible to find any cases. I bought some but they will be delivered at least 1 month ago.
So is there any-where to find a replacement part for my back cover? I asked it to Oneplus itself but they told me that they don't sell spare parts. I looked into ebay but there's not any of it.
I know it's not a big thing but I have a big OCD problem. And it looks like a disaster to me.
ANy help will be appreciated.
Click to expand...
Click to collapse
Ouch, I feel your pain dude.. I would suggest maybe covering it up with a skin for the time being and when they do start making replacement backings eventually, get one then..
two months ago, seen at Aliexpress, price was around 70$, but now item is not available. Just contact with CS and ask how much they will charge for back housing replacement at RMA.
https://dbrand.com/shop/oneplus-3-skins
Try one of these in the meanwhile. I'm sure you'll find a combination that suits your style!
kamajikaciya said:
In a nutshell I have this today:
It's my first day with my phone. I cannot use any case because in my country (Turkey) it's impossible to find any cases. I bought some but they will be delivered at least 1 month ago.
So is there any-where to find a replacement part for my back cover? I asked it to Oneplus itself but they told me that they don't sell spare parts. I looked into ebay but there's not any of it.
I know it's not a big thing but I have a big OCD problem. And it looks like a disaster to me.
ANy help will be appreciated.
Click to expand...
Click to collapse
Im sure trying to replace it on your own will cause more damage to the device because you can mess up adhesives, screen, other internals & etc
And when they say they dont sell parts it means you will endup with a cheaper manufactured backcover that is not even original. Just keep the device as it is those two dots shouldnt bother you
I'll bough 2 original cases. I think it will be ok when I get them.
By the way on the teardown videos of OnePLus 3 it looks pretty easy to remove the back cover. No adhesive or something. Just removing the bottom screws will do the job.
Man, i had the absolute same problem. When i unpacked my OP3, the charger fell out of the xox and hit the phone on the absolute same place on the bezel
I sold mine on ebay the other day and ordered a new one.
it's really simple to disassemble op3. two screws, and back cover is removed. no glue, ect.
http://www.ebay.it/itm/252638839784?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1558.l2649
kenzolo said:
http://www.ebay.it/itm/252638839784?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1558.l2649
Click to expand...
Click to collapse
Thank you but it's not original. It's just a chinese copy.
kamajikaciya said:
Thank you but it's not original. It's just a chinese copy.
Click to expand...
Click to collapse
That's kind of a funny comment as the OEM is a lower cost Chinese company.
nine5raptor said:
That's kind of a funny comment as the OEM is a lower cost Chinese company.
Click to expand...
Click to collapse
I know but it's not original.
On the other hand chinese market produce fake/copy parts for their own companies too.
kamajikaciya said:
I know but it's not original.
On the other hand chinese market produce fake/copy parts for their own companies too.
Click to expand...
Click to collapse
I know I'm late here but how do you guys suggest it would be possible to produce fake back housings at the price they are charging for them? I mean how many people would realistically buy parts exclusively made for one device, and an oneplus 3 at that? A few thousand people at most? If this is the case I don't think it would be financially viable to make any sort of production line for these parts. Aside from stealing original ones from the factory, or mabye defective ones I don't see how they would produce such a limited quantity for so cheap unless they are originals? Any insight?
There are many options for the back cover. The back on my Oneplus 3 was damaged but not as bad as yours. I was planning to replace my back but all i had was a tiny scratch so it wasn't worth it. I will change it when my back is really messed up. When you search for the cover on ebay just search for battery cover You can tell most fakes as they don't have the oneplus logo and for a different colour, try to get one with the sim card tray. Try to get a cover near Hong Kong, Shenzhen and Guangdong that's where the Oneplus headquaters is. There's also a midnight black cover as well!
Original: http://www.ebay.co.uk/itm/Battery-H...305502?hash=item3ae2de09de:g:E9UAAOSww9xZAyjH
Midnight black: http://www.ebay.co.uk/itm/Originl-M...hash=item4664c8bbfe:m:mpSJfaO-1rrmkP-ULb3a6Tg