Database Develop

Hey guys...1.5 ROM?

Sorry for asking but ive checked the search and i cant seem to find it. Im looking for the original ROM 1.5 i think it was for the wizard...my phone wont do anything but go to the bootloader screen even after ive flashed it to 2.6 so im thinking i need to do the original ROM...anyways does anyone know where i can find it and download it? thanks for any help guys

oh i flashed it to what i think was 2.0...still the same bootloader problem but now it says IPL 1.01 and SPL 1.01...but still stuck at the bootlader screen...

Flash button rom:
http://forum.xda-developers.com/showthread.php?t=298613

i did that and now its still stuck at the bootloader screen with IPL 2.26 and SPL 2.26...somethings not right about my cell phone or something...any other ideas anybody?

XxShibbyxX said:
i did that and now its still stuck at the bootloader screen with IPL 2.26 and SPL 2.26...somethings not right about my cell phone or something...any other ideas anybody?
Click to expand...
Click to collapse
Have you read and followed this and the steps it points you to?
http://forum.xda-developers.com/showthread.php?t=298613
I assume you have a G3 since you are flashing these other roms, and based on the IPL/SPL numbers you are giving. You need to give us specifics of what you have done, what happened at each step and where you are at now. Details are a good thing, as its hard to diagnose with just bits of the information. At one point you say 2.6 (no idea what that is) then you say you are stuck at 1.01, and now you say 2.26. So please tell us (in gory detail!) what all you have done...
If you follow all the steps in the thread above you will get CID Unlocked, but at the point where you are now, you need to flash YOUR PROVIDER's original rom to get back to a known state. Then try doing the CID Unlock.

alright i was using molskis 3.0 and for some reason sometimes my phone would not dial or connect so i restart it once every few days...well i did a simple restart and when my phone turned back on it was on the bootloader screen with IPL and SPL of 2.26...i figured i would have to flash the rom again or go to an earlier one...so i get home and try to flash molskis 3.0 again...right after it finishes and restarts itself it comes up with the bootloader screen again...now at this point im thinking i might have to do an earlier one like the original t-mobile rom and so i tried that...same problem stuck at the bootloader screen but with IPL and SPL of 1.01...so i post and then vippie tells me to download the button rom...i try that and no luck still the same problem and i followed those steps exactly and no luck...so now my phones just sitting on my nightstand charging with a bootloader screen and nothing else and the IPL and SPL says 2.26...could it be internal damage or what? i like my phone and dont wanna have to spend the money on a new one but at this point im thinking i might have to...thanks mfrazzz for offering your help...i know i seem like a noob and i really suck at punctuation but im not stupid so anything you guys tell me to do in detail i will be able to try

I don't follow you anymore.... you got IPL/SPL 1.01 and tried to flash button rom, after this your IPL/SPL is 2.26? Impossible....
Sometimes it won't go past bootloader no matter what you do... do this to revive:
http://forum.xda-developers.com/showthread.php?t=276963

CID Unlock not working

Hi All,
I have not been able to unlock my Cingular 8125... to upgrade the thing to WM6.
Yip ran the lockwiz a few times... it did give me some write error though.
...
CopyFileToTFFS(unlocked.bin:0, 0, 00010000)
ERROR: ITWriteDisk - An internal error occurred.
result=80072746
Your phone is now unlocked...
My phone is a G3. I can use different sims. But I cannot CID unlock? I have used lokiwiz and awizard... what else can I do to CID unlock?
I am currently downloading your rom.I have not tried any roms as I am quite new to this. I have flashed my 8125 to - IPL1.01 SPL 3.08 gsm 01.12.10 os1.5.4.2.
I have also tried several time to downgrade to button... no joy, the spl wont go. I have upgraded to both ipl/spl3.08 and still cannot upgrade the rom.
Thanks,
SanMan

Did you read the sticky with the guide to an easy and safe unlocking by Dr. Puttingham? If you did then you should have read with more attention.
You've messed up your phone's bootloader. It's not supposed to have such different values. If you didn't unlock it before moving to SPL 3.08 you won't be doing it now as it must be 1.xx for lokiwiz and other tools to work.
Go READ threads of others in same situation as you and be sure to have a FULL battery before starting the flashing process.

great thanks for that... so since my spl and ipl are not the same I need to try to downgrade my spl to the same version of button?
Bud I have read and read and read... and now I have only posted. I see that people in my predicament look for a rom called 1.18 from cingular and apparantly that fixes the problem so I can downgrade and re-run my cid unlock. I will read through all of Dr Putting threads where I have also posted to try to resolve this. Thanks for you constructive assistance.
Kind regards,
SanMan
We were all at this point in our lives sometime.

Need rom for downgrade
hi SandfordE,
Could you please send me the link or the file that downgrade the rom to 1.xx. i have tried to looking for so much time but sill can't not. all link is dead.
please, thank you for your help

the blind leading the blind.
well the only one I have been able to get is this one, from Dr putting
http://rapidshare.com/files/18212239/CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe.html
I cannot find the 1.xx cingular rom which apparantly you need if you dont follow dr p, goodies properly.
Apparantly if you goto http://www.htcwizardweb.net/node/161 and register there is a pathetically slow download link for 1.8x... which should be able to change the ipl and spl to the same thing.
hope this helps you. Please dont run or upgrade anything on ure phone till both the ipl and spl are 1.x that where I made my mistake.
Being a techie I guess thats our problem always wanting to upgrade with out rtfm.
hth
San

Thank SanFordE
Downloading, then downgrade to ipl/spl 1.xx, then cidunlock then uprade to ipl/spl 2.xx then update to wm6.
Am i correct??
thanks again for your help

hi magic
yip thats exactly what I am doing, hopefully it will work, please could you post ure results. Pity bandwidth here in South Africa is so terrible else i would be able to download at home.
Thanks man,
Sanford

hi SanfordE,
why my ipl is 1.xx but the spl still 2.xx after flash sucessfully??
Thanks

Hi,
This worked for me, now i just need to flash the ipl/spl 2.xx then ready for wm6
Thanks

Maybe try to flash with button from dr p sticky... but remember before you can do anything else the like run lokiwiz, the ipl and spl need to be 1.xx
hope this helps.
s

SanfordE said:
Maybe try to flash with button from dr p sticky... but remember before you can do anything else the like run lokiwiz, the ipl and spl need to be 1.xx
hope this helps.
s
Click to expand...
Click to collapse
wow, i'm impressed . You passed from asking for tutoring to giving good tips in no time. well done m8 . All you need now is to manage the successful downgrade.
Are you sure your phone is still locked? Check CID status with mtty.

Thanks for that tip
Got already will try this procedure again tonight... hopefully it works.

hi SanFordE,
now i'm on wm6. thank a lot for your support

Hi MagicEr,
How many times did you have to flash with 1.8.11
I have tried twice already and my spl is still 3.08...
Maybe downgrade to Wizard_Love 2.26? The rey the other way?
Any input is kewl...
no worries S

WM6 is lovely...
All fixed on WM6
Note to all good people, once you have flashed with 1.8.11 <-- this is only on a cingular 8125, even though the spl is 3.08, you can run your lokiwiz to CID unlock and then flash.
Many thanks to all the developers and contributors to this forum.
Sanford

SanfordE said:
All fixed on WM6
Note to all good people, once you have flashed with 1.8.11 <-- this is only on a cingular 8125, even though the spl is 3.08, you can run your lokiwiz to CID unlock and then flash.
Many thanks to all the developers and contributors to this forum.
Sanford
Click to expand...
Click to collapse
hmm not sure if the SPL is really 3.08 although it shows that.
The CID block protection is applied by SPL so if lokiwiz worked it means that the SPL did downgrade
Glad you fixed it though.
cheers

Wizard_love

Can someone point me to an English version of this? The only one I can find linked on this site is http://rs25.rapidshare.com/files/17792050/Wizard_Love_2.26.10.2_WWE_Novii_CF2.rar. This is in another language (Italian maybe) and I keep getting a "300" error. Thanks.

sdl said:
Can someone point me to an English version of this? The only one I can find linked on this site is http://rs25.rapidshare.com/files/17792050/Wizard_Love_2.26.10.2_WWE_Novii_CF2.rar. This is in another language (Italian maybe) and I keep getting a "300" error. Thanks.
Click to expand...
Click to collapse
Are you sure you have a G4 ?

No, I have a G3. But according to "How to flash a new ROM to your Wizard... a little tutorial!" http://forum.xda-developers.com/showthread.php?t=298613, if I have an IPL/SPL of 2.xx, I need the wizard_love rom. Read last sentence of G.2.
I used the button ROM. It brought my IPL down to 1.01, but my SPL is still 2.25. Is that OK to proceed?

Keep reflashing the button ROM until both your IPL and SPL are 1.xx. It may take a few times. I think I've read where it's taken some people as many as 7 or 8 times to get them both down. Be patient and make sure your battery is good and charged and when you get them both down, then run lokiwiz to unlock your phone.

xeno1 said:
Keep reflashing the button ROM until both your IPL and SPL are 1.xx. It may take a few times. I think I've read where it's taken some people as many as 7 or 8 times to get them both down. Be patient and make sure your battery is good and charged and when you get them both down, then run lokiwiz to unlock your phone.
Click to expand...
Click to collapse
After at least 15 flashes with button, still no luck. I started with Cingular 2.25.
The button I am using is CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe.
My IPL is down to 1.01, but my SPL is still 2.25. How in the world do I get passed this?
It really sucks when you can't get past the first step .
P.S. Should the SIM be in the unit during the flash? I've tried it both ways.

Not sure if it matters if the sim in is in it or not, but make sure your SD card is out because that causes problems a lot of times. Here, download and try this, it is an IPL/SPL updater only. It has version 1.05 of both which might be able to bring your SPL down so you can unlock your phone.

xeno1 said:
Not sure if it matters if the sim in is in it or not, but make sure your SD card is out because that causes problems a lot of times. Here, download and try this, it is an IPL/SPL updater only. It has version 1.05 of both which might be able to bring your SPL down so you can unlock your phone.
Click to expand...
Click to collapse
Tried it several times. No luck, SPL still stuck at 2.25, but thanks for the help. Anyone else out there with this problem?

That's weird, usually it happens the other way around and people get their IPL stuck at 1.xx when they try to upgrade back to a 2.xx but the SPL upgrades without a problem. Since you already have the button ROM on there, go ahead and try and see if it will CID unlock for you. Run lokiwiz and see if it gives you any errors and if not, download and install Wizard Service Tools on to your computer and then run it and click the CID actions button to see if it tells you that your CID is unlocked. If it does then your safe to start upgrading. For some reason I have a feeling it might just work for you.

same here, got the cingular 8125 and flashed the rom. I can not get the spl down. I have 2.25 as well. ahhh what other rom should be good for a cid unlock

also i am on activesync as "guest" dont know if this matters

ctheodores said:
also i am on activesync as "guest" dont know if this matters
Click to expand...
Click to collapse
That doesn't matter.
Try flashing Tmobile 2.26 then again the 1.05 Button ROM
From what i know the Wizard Love is only for G4 Users. G3 users should flash Tmobile stoc 2.26

not all g3 are the same!!
i have experienced the same with my g3 (IPL/SPL 2.18) when i tryed to downgrade the spl... ipl 1.05 and spl 2.18 still remain... just try to unlock spl with lokiwiz02b and relax... i tried to install tnt 5.0 23 times before i unlocked the spl... just read and apply this : http://forum.xda-developers.com/showthread.php?t=285435
i downgraded and reupgraded my spl locked g3 (qtek 9100) in 45 minutes at the state of art...
-----------------------------------------------
tnx to all people that try and try and try and teach us with his experience...

I have found that the SPL doesn't matter. Go ahead and run lokiwiz and you will be ok.

yeah i got throught just run lokiwiz02b cid unlock and then update to tmo rom

IPL and SPL that don't match

I started a new thread so that people wouldn't have to read through my trials but long story short I have a G3 wizard and I'm trying to flash it. Followed all of the steps in the guide by vippie. I used the button rom to start with but mine was one of the many that stopped at 98% and gave me error 302 so I ended up using the XDA mini rom as the alternative that was suggested.
Now I've flashed my phone three times with the same rom to try and get the IPL and SPL the same but to no avail. The IPL and SPL are 1.05 and 2.25 respectively. Any help would be greatly appreciated.

hey i flashed my tmobile mda to a chinese rom too and then it changed spl to a diff version than the ipl and then i tried to flashed it with love rom and still it doesnt change the ipl and spl to the same version that i had before, then i removed the battery then my phone does not charge or turn on anymore, i have a g4 by the way, i m not sure if i bricked it or not

joco2560 said:
hey i flashed my tmobile mda to a chinese rom too and then it changed spl to a diff version than the ipl and then i tried to flashed it with love rom and still it doesnt change the ipl and spl to the same version that i had before, then i removed the battery then my phone does not charge or turn on anymore, i have a g4 by the way, i m not sure if i bricked it or not
Click to expand...
Click to collapse
I think you may have been trying to offer your empathy for my particular situation but that's what we in the business call thread jacking. Start your own thread please. Thanks for the comments though.
I was thinking today I may give flashing the button rom another try. Any suggestions people?
And a bump for some professional help and good luck as well.

SharpieMarker said:
I think you may have been trying to offer your empathy for my particular situation but that's what we in the business call thread jacking. Start your own thread please. Thanks for the comments though.
I was thinking today I may give flashing the button rom another try. Any suggestions people?
And a bump for some professional help and good luck as well.
Click to expand...
Click to collapse
wow, basically the same problem just trying to let u no that other ppl r having the same problem and i thought my problem would've helped in some ways...thx for trying to be nice at the end but ur not. sry i forgot to metion that:" hey, SharpieMarker im having the same problem that ur having..."in my previous post

joco2560 said:
wow, basically the same problem just trying to let u no that other ppl r having the same problem and i thought my problem would've helped in some ways...thx for trying to be nice at the end but ur not. sry i forgot to metion that:" hey, SharpieMarker im having the same problem that ur having..."in my previous post
Click to expand...
Click to collapse
Well I apologize if I came of as a douche, I guess I didn't understand what you were saying exactly. I appreciate any support I can get with the issues I'm having so its good to know I'm not the only one. Thanks joco.

SharpieMarker said:
Now I've flashed my phone three times with the same rom to try and get the IPL and SPL the same but to no avail. The IPL and SPL are 1.05 and 2.25 respectively. Any help would be greatly appreciated.
Click to expand...
Click to collapse
Surely you're not serious? oh Jesus, you are.
OK... SPL is separate from IPL, not only is it impossible to get them to be "the same version" it would also achieve nothing to actually do so either... so please, the procedure is very simple, you flash a patched SPL, you flash your crap on. Job Done... I thought there was already a patched SPL for G3... do I need to make one of those as well?!?

Olipro said:
Surely you're not serious? oh Jesus, you are.
OK... SPL is separate from IPL, not only is it impossible to get them to be "the same version" it would also achieve nothing to actually do so either... so please, the procedure is very simple, you flash a patched SPL, you flash your crap on. Job Done... I thought there was already a patched SPL for G3... do I need to make one of those as well?!?
Click to expand...
Click to collapse
Well that seems logical however I was misinformed. SO I've flashed this Xda_mini rom, then what is the cause of the issues I was having getting a connection error when trying to CID unlock? Wizards have to be CID unlocked before flashing 2.X roms right?

What started as a simple, objective thread, has become quite confusing in a matter of a few posts.
joco2560 said:
wow, basically the same problem just trying to let u no that other ppl r having the same problem and i thought my problem would've helped in some ways...thx for trying to be nice at the end but ur not. sry i forgot to metion that:" hey, SharpieMarker im having the same problem that ur having..."in my previous post
Click to expand...
Click to collapse
Well, in fact your problem ISN'T the same as SharpieMarker's because his phone is still alive...
I believe you tried to downgrade a G4 to 1.xx bootloader which only exist for G3. Once the battery came out your phone could never boot again. Say bye bye to it...
SharpieMarker said:
Well that seems logical however I was misinformed. SO I've flashed this Xda_mini rom, then what is the cause of the issues I was having getting a connection error when trying to CID unlock? Wizards have to be CID unlocked before flashing 2.X roms right?
Click to expand...
Click to collapse
A LOT of people are reporting failed downgrades which 'block' the SPL at 2.xx. Once there even after 30 flashes the SPL never lowers to 1.xx to allow CID unlocking.
No solution is known until now...
Olipro said:
Surely you're not serious? oh Jesus, you are.
OK... SPL is separate from IPL, not only is it impossible to get them to be "the same version" it would also achieve nothing to actually do so either... so please, the procedure is very simple, you flash a patched SPL, you flash your crap on. Job Done... I thought there was already a patched SPL for G3... do I need to make one of those as well?!?
Click to expand...
Click to collapse
There isn't and i believe you should patch one...
cheers

mestrini said:
A LOT of people are reporting failed downgrades which 'block' the SPL at 2.xx. Once there even after 30 flashes the SPL never lowers to 1.xx to allow CID unlocking.
No solution is known until now...
Click to expand...
Click to collapse
So what is the solution or is it the patched SPL that Olipro is referring to?

The HardSPL (Olipro) is ONLY for use with G4. The flash program should keep you from flashing it to a G3 Wizard because their SPL code are not compatible.
SoftSPL also doesn't work for G3 wizard.
joco2560 should be produced a brick because as I know, no unofficial Chinese ROMs are equipped with G4 IPL and SPL.

Man if only these guys would have read the WIKI... There is a link in my signature to an outstanding tutorial for newbies. Just read it and you will feel enlightened. Everything will seem so simple and life's purpose will become evident... Just Kidding but seriously guys... Read the damn WIKI... I'm tired of reading about bricks.
NOTE:: THIS ENTIRE POST IS ONE GIANT LINK TO THE WIKI I'M TALKING ABOUT!!!
READ IT!!!

starkwong said:
The HardSPL (Olipro) is ONLY for use with G4. The flash program should keep you from flashing it to a G3 Wizard because their SPL code are not compatible.
SoftSPL also doesn't work for G3 wizard.
joco2560 should be produced a brick because as I know, no unofficial Chinese ROMs are equipped with G4 IPL and SPL.
Click to expand...
Click to collapse
Alright, this is helpful and I was hoping there might be a few suggestions as to what to do at this point. Thanks guys for the comments.

dharvey4651 said:
Man if only these guys would have read the WIKI... There is a link in my signature to an outstanding tutorial for newbies. Just read it and you will feel enlightened. Everything will seem so simple and life's purpose will become evident... Just Kidding but seriously guys... Read the damn WIKI... I'm tired of reading about bricks.
NOTE:: THIS ENTIRE POST IS ONE GIANT LINK TO THE WIKI I'M TALKING ABOUT!!!
READ IT!!!
Click to expand...
Click to collapse
Okay, firstly I have not bricked my device. I have read all of the guides and walkthroughs before attempting anything on my wizard. Unfortunately your guide that you have written, just like the other ones, has not answered my question or told me what I should do (unless I have missed it somewhere which is possible).

Okay, after some finagling with the lokiwiz application I managed to unlock and then cid unlock my phone however the IPL is still 1.05 and the SPL is 2.25. Is that accurate or should the SPL be lower now? Do I need to reflash?
Alright, after re-re-re-re-re-reading the instructions I think I understand the bit about IPL and SPL. I think. Feel free to clarify though.

If lokiwiz does not show any errors during unlocking (NOTE That lokiwiz always shows successful regardless it is actually unlocked or not, so the error message is the most important), then either try to flash Button's ROM again and you will get 1.05 IPL and SPL (That's my way), and others suggests to upgrade IPL and SPL directly to 3.08.

starkwong said:
If lokiwiz does not show any errors during unlocking (NOTE That lokiwiz always shows successful regardless it is actually unlocked or not, so the error message is the most important), then either try to flash Button's ROM again and you will get 1.05 IPL and SPL (That's my way), and others suggests to upgrade IPL and SPL directly to 3.08.
Click to expand...
Click to collapse
There was no error message when I CID unlocked. It successfully unlocked both times (the first using the U command and after a restart using the C command). My phone restarted twice during the unlocking so I think it went just fine. So should I proceed with the flashing of the tmobile rom? After the unlocking I have an IPL of 1.05 and an SPL of 2.25.

You can always go back to Button's ROM, so it's OK to flash T-Mobile ROM.
However I still recommend to flash Button's ROM once more first.

starkwong said:
You can always go back to Button's ROM, so it's OK to flash T-Mobile ROM.
However I still recommend to flash Button's ROM once more first.
Click to expand...
Click to collapse
Well I decided to flash the t-mobile rom and it went smooth. Everything works fine. So now I have an IPL and SPL of 2.26 so I can flash some of the more interesting roms right? Thanks for all the help and advice guys. Much appreciated.

SharpieMarker said:
Well I decided to flash the t-mobile rom and it went smooth. Everything works fine. So now I have an IPL and SPL of 2.26 so I can flash some of the more interesting roms right? Thanks for all the help and advice guys. Much appreciated.
Click to expand...
Click to collapse
Yes you should now be CID unlocked and can flash any Rom you want as long as it does not contain an IPL/SPL.
And by the way, It does tell you in that WIKI exactly what you need to do to CID unlock your device. (The SPL will not downgrade to 1.05 unless you flash the button Rom again AFTER completing The Unlocking Process through lokiwiz. I wouldn't even reccomend flashing the button Rom again. It's pointless because Flashing the T-Mobile Rom is going to upgrade you IPL/SPL to a higher, matching pair and is going to give you a very strong, stable base rom to flash to a custom Rom From.

SharpieMarker said:
Well I decided to flash the t-mobile rom and it went smooth. Everything works fine. So now I have an IPL and SPL of 2.26 so I can flash some of the more interesting roms right? Thanks for all the help and advice guys. Much appreciated.
Click to expand...
Click to collapse
I think you should check your CID status with WST before trying to flash a custom ROM. Lokiwiz doesn't check for errors and proceeds as if everything went ok even if it didn't.
For all we know your phone might be originally from T-Mobile and even CID locked would always accept an official ROM.

nothing is going my way.....

i hv found an imate kjam with ipl 1.01 n spl 1.06 os 1.1.9.3 plzzzzzzzzzzzzzz help me i have tried many roms but upgradation doesnt even starts i have unlocked cid but now plzzzz tell me how to upgrade my windows 5?

Is any one here?

mughees said:
Is any one here?
Click to expand...
Click to collapse
Not much. Most of the experts left the Wizard long ago. All you have left are some of us who remember what the experts posted years ago. One of those excellent threads is the [READ FIRST] sticky thread at the top of this forum.
I think that the first step is to get the SPL and IPL to the same version. Since you seem to have a G3 model, maybe you can burn the Button ROM and get them to the same version. Then, you can upgrade to a newer IPL and SPL, install a later radio, and try some of the ROMs. But I don't think you'll be able to burn a ROM until you get SPL and IPL to the same version. Give Button ROM a try if you can find it. If you cannot find it, ask for it - surely someone has it.
Edit: the [READ FIRST] thread has a working link to the Button ROM.