Related
Can someone please help me, I am going to upgrade my O2 XDA 11s from ROM 1.31 to 1.40 imate Rom with extended ROM.
Do I need to backup a special way so I dont lose any files when I restore my backup after upgrading to 1.40.
Please go to wiki, the for beginners section, you will find a answer there.
I just upgraded my 02 XDA 2s with the iMate 1.40 ROM, and it works like a dream! Thanks!
care to share exactly how it worked like a dream?
in what ways better than your old rom?
farbird said:
care to share exactly how it worked like a dream?
in what ways better than your old rom?
Click to expand...
Click to collapse
i just upgraded my iis with the imate rom as well. personally, skype works a lot, and i mean A LOT better than it used to. i think it is mostly attributed to the upgrade of the radio.
Update successful
hi,
i just updated today my XDA IIs ...
1) my splash screen changed to imate... will try to change it to a bettter looking one soon.
2) GPRS connection problems solved
3) no degradation in performance atleast!
4) bluetooth upgraded to 3900
5) radio upgraded to 1.12
NOTE: Ma_updateNo ID.exe ..... gives error on 1st run but works fine when run again! thanks for informing me about this dilipc![/quote]
farbird said:
care to share exactly how it worked like a dream?
in what ways better than your old rom?
Click to expand...
Click to collapse
I trust the above comments answer your question!
if i do the same and upgrade to the imate 1.40 rom, how do i get the o2 active stuff on and the connection settings???
i like them and like to keep them!!! 8)
Well im getting my 8125 in a few days and i want to figure this out before i get it. Ive been reading the topics on this board and have found that there are a couple different roms available to update to. The ones i have seen are the 2.25 and the aku 2.3. Also i have seen a link to HTC's site that has an update available which i think is the 2.25 one through cingular. And finally i have seen the direct push update from cingular, is this the same as 2.25 or is a seperate thing that also needs to be downloaded? from what ive read on the forum it seems as if the aku 2.3 is the better one to go to so if i installed that would i also need to install the direct push update from cingular? Thanks for the help, just a little confused about it.
Re: New to the 8125, confused on which version to upgrade to
tcd2004 said:
Well im getting my 8125 in a few days and i want to figure this out before i get it. Ive been reading the topics on this board and have found that there are a couple different roms available to update to. The ones i have seen are the 2.25 and the aku 2.3. Also i have seen a link to HTC's site that has an update available which i think is the 2.25 one through cingular. And finally i have seen the direct push update from cingular, is this the same as 2.25 or is a seperate thing that also needs to be downloaded? from what ive read on the forum it seems as if the aku 2.3 is the better one to go to so if i installed that would i also need to install the direct push update from cingular? Thanks for the help, just a little confused about it.
Click to expand...
Click to collapse
The AKU 2.3 ROM, as well as the 2.25 version from Cingular both have Direct Push. Anything that is AKU 2.0 and above has DP.
excuse my noobishness, but what is Direct Push?
If you're new to the Wizard and trying to pick a ROM to try, I'd suggest one of the following based on your carrier:
T-Mobile US - Download one of Xelencin's ROMs
Cingular - You want one of Summiter's creations
If you are overseas and use a different carrier, or just want a barebones ROM to customize the way you see fit, grab Mr. Clean.
Since you say you've got an 8125, I'm guessing that you're on Cingular in the US. In that case, stick with Summiter's latest as it will be a plug-and-play solution for you.
would i still need to download the direct push from microsoft if i downloaded summiters or is it built in?
Re: New to the 8125, confused on which version to upgrade to
summiter said:
Anything that is AKU 2.0 and above has DP.
Click to expand...
Click to collapse
Summiter's lastest is 2.3 so no further downloads needed for DP.
New question since it looks like summiter just released an updated 2.3. Do i need the update that has the bootloader or the one with no bootloader? Thanks again
tcd2004 said:
New question since it looks like summiter just released an updated 2.3. Do i need the update that has the bootloader or the one with no bootloader? Thanks again
Click to expand...
Click to collapse
If you already have AKU 2.3 then you do not need to update the BL, read his post, read it again, he says it in there! =) <-- all smiles man
this is probably a dumb question but what does AKU stand for? Its a brand new phone so i doubt it has aku 2.3 on there so im assuming i need to install the one with the bootloader. Thanks
Ty
I'm dying waiting If any one got some news. please share
ValkyrieLenneth said:
I'm dying waiting If any one got some news. please share
Click to expand...
Click to collapse
yeah im running it. you use the wizard base rom and replace wavedev.dll and battdrvr.dll with ones from the prophet rom to get the sound and battery working. install arcsoft to restore mms. no camera support though. looking into it.
one of the big errors though is that coming out of sleep soft resets it, so doesnt make it very practical!!
edit: apparently the battery needs to get used to wm6 and the soft reseting stops after a few days, mine now has
WM6 for Charmer
Could you send me a PM with a short instroduction for installing the wm6?
mfg
softonic123
i can crossbow on charmer too
Can anyone please email it to me @ [email protected] ? thank you
and me
could u allso send it me please with the roms aswell [email protected]
well, i'm seriously interested also - i would be glad if anybody may send me WM6 ROM image through any of common sharing services
And why didn't we take the os from prophet?? With its batarry and wave dll
i have it!
i have the rom ! ya just got to patch it to run on charmer ! woop! will let u guys know how to fix it!
samwood said:
i have the rom ! ya just got to patch it to run on charmer ! woop! will let u guys know how to fix it!
Click to expand...
Click to collapse
Hi, Samvood
Could You give us some info about the ROM please? Which ROM is that one based on?
Regards
Radek
its the wizard rom
ive got the nk.nbf file
@Samwood:
Have you flashed your device with that nk.nbf file? does it work?!
share!
Is this modified ROM uploaded somewhere?I would like to toast and testi it
Any suggestion to madkoe[AT]gmail.com thanks
trying
still trying to flash device with this rom,i need some help with flashing it plz
WARNING!
still trying having trouble
and what about tricolor mode on your brick? it is possible?
still working
im still working on it, yeah i got it into the bootloader, and reflashed it, im just trying to see what went wrong, could anyone else help who have sucscessfully done it on there charmer?
Are these versions of WM6 final or just beta builds?
I'm looking forward to flash my Charmer (MDAcII) to WM6, but I won't try to mess up my phone with some beta rom.
BTW: Any ideas if WLAN will work under WM6? According to 'some' posts here in the forum, WM5 + WLAN on Charmer = Not working properly. :-/
Bye, Youser
youser said:
Are these versions of WM6 final or just beta builds?
I'm looking forward to flash my Charmer (MDAcII) to WM6, but I won't try to mess up my phone with some beta rom.
BTW: Any ideas if WLAN will work under WM6? According to 'some' posts here in the forum, WM5 + WLAN on Charmer = Not working properly. :-/
Bye, Youser
Click to expand...
Click to collapse
everythings beta, there will never be a official wm6 final as htc will only develop wm6 for new models. as for the wlan stuff, wm5 wasnt the problem it was the drivers written for it by the wifi card maker.
imo wm6 isnt worth it, its not finished, big problem with standby, the camera doesnt work, mms isnt included as standard. it just looks pretty, and that can be done on a wm5 device anyway.
ok, thx for the feedback ;-)
Dr. Martin Gonzo has made a Windows Mobile 6.1 ROM for the Vox. Can somebody try to port this to Wings?
Thanks and best regards,
SimonKnight6600
SimonKnight6600 said:
Dr. Martin Gonzo has made a Windows Mobile 6.1 ROM for the Vox. Can somebody try to port this to Wings?
Thanks and best regards,
SimonKnight6600
Click to expand...
Click to collapse
Must be alot missing from that ROM.. only 41,5 MB
it would be really nice if smone like gonzo will take care of wings software like hes doing on vox..
Okey. I flashed this OS to my wings.. cant realy see any difference?
Windows Mobile 6 Standard
CE OS 5.2.16.22 build: 18128.0.4.4
Does not look like 6.1 to me? strange..
Gonzo released several updates, for example here: http://forum.xda-developers.com/showpost.php?p=1997049&postcount=142. I would be nice if you could try to flash this one.
//edit: This post is more recent: http://forum.xda-developers.com/showpost.php?p=1997049&postcount=142
The Rom is missing "Xip.bin" so it is not extracted propertly...
SimonKnight6600 said:
Gonzo released several updates, for example here: http://forum.xda-developers.com/showpost.php?p=1997049&postcount=142. I would be nice if you could try to flash this one.
//edit: This post is more recent: http://forum.xda-developers.com/showpost.php?p=1997049&postcount=142
Click to expand...
Click to collapse
Okey, downloading.. Will check it out
My mistake here, I flashed an old rom..
Now tried flashing this 6.1 rom, and it just goes to 82% and stops..
I cant figure out why.. I extracted the .nbh file, recompiled it to wing220.
But still, no go... strange...
Alcaline said:
My mistake here, I flashed an old rom..
Now tried flashing this 6.1 rom, and it just goes to 82% and stops..
I cant figure out why.. I extracted the .nbh file, recompiled it to wing220.
But still, no go... strange...
Click to expand...
Click to collapse
There is an information that without any changes it is not possible to load it into Wings. Do you know which changes are neccessary?
phailo said:
There is an information that without any changes it is not possible to load it into Wings. Do you know which changes are neccessary?
Click to expand...
Click to collapse
Trying to figure it out here Trying to find a WM 6.1 kitchen.. I tried the Kaiser 6.1 kitchen but it does not run well here.. I need to extract all files properly.
guys, just wanted to say you should rather start from the source instead of starting from my rom which is still buggy and already a bit customised for the Vox.
You can download the original moto q update from my server here : http://ostiedbrosse.free.fr/Xda-Dev...GSZDRWNAPCNCMNSL003_secure_2803416007_1FF.rar
I found it on a chinese site.
BTW if you know of any other wm 6.1 standard version PM me.
Good luck on porting it to the Wings. It's not particularly difficultbut sometimes things don't work and you just can't locate the problem. + it takes a looot of time
Hi Dr. Martin Gonzo!
Thank you . Can you give us a short description which steps we have to do in order to port it?
Thanks,
SimonKnight6600
Finaly getting somewere here now.. But a big puzzle sorting out all the files..
Made some attemptes flashing the 6.1 version over. But the unit does not boot like it should..
Anyway, moving in the right direction at least
you have to at least replace coredll.dll in the xip and you can get rid of hd.dll, osaxst0.dll and initflashfiles.dat
Also don't forget to replace \.VM in \SYS with .VM from an original s730 rom.
If you have questions PM me, give a quick smmary of all you have done me and I'll try to help you.
Dr. Martin Gonzo said:
you have to at least replace coredll.dll in the xip and you can get rid of hd.dll, osaxst0.dll and initflashfiles.dat
Also don't forget to replace \.VM in \SYS with .VM from an original s730 rom.
If you have questions PM me, give a quick smmary of all you have done me and I'll try to help you.
Click to expand...
Click to collapse
Aha, great tips! I will try this later today. Thanks
Is there anyone who has the original HTC S730 ROM so you can always restore your phone?
I can imagine that you flash your phone with a cooked ROM and you don't like it that you want to go back to the original HTC rom, but I can't find it.
shiped rom
I think this is the original rom
http://forum.xda-developers.com/showthread.php?t=364783
any progress yet?
Surfboomerang said:
any progress yet?
Click to expand...
Click to collapse
No, sorry. Just havent had the time..
Flash Hard SPL before you try to flash any new OS to your device..
Hard SPL, USPL, SSPL, SPL.....
As far as I know I have to run a file on my phone to unlock the phone so I can install cooked Roms. The phone is then unlocked until you do a hard reset.
Please correct me if I'm wrong.
Any one can help me..
My I-Mate don't have radio soo i can't use for phone..(NO GSM) after upgrade to WM6.
How to get my radio againt to my I-Mate ?
Thanks.
novian said:
Any one can help me..
My I-Mate don't have radio soo i can't use for phone..(NO GSM) after upgrade to WM6.
How to get my radio againt to my I-Mate ?
Thanks.
Click to expand...
Click to collapse
If you upgrade normally and make hard reset as mention in readme file, then you shouldn't loose the radio. Basically no links.
However in C_shekar Roms posts always radio, try to install it!!
thanks...but i don't know how to install it can you instruct me to install in.
where i can found C_shekar roms ?
The_hesham said:
If you upgrade normally and make hard reset as mention in readme file, then you shouldn't loose the radio. Basically no links.
However in C_shekar Roms posts always radio, try to install it!!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=387451