Hello,
I have this rom : RUU_Trinity_LVSW_WWE_1.25.0.8_GPS (AKU 3.5.2)
from http://forum.xda-developers.com/showthread.php?t=302198
I wanted to test the new WM6 roms, unfortunately, my trin doesn't update with any rom I tried (Orange, HTC, LVSW Wm6, Mun_Rus Wm6, ...)
It tells me : "ERROR 262 : UPDATE ERROR
... communication error during the process"
I'm stuck on LVSW Wm5 rom :'(
Not sure if Des SPPL is causing this problem... anyway, I tried to update it from Bootloader or synched, on XP and Vista, 5 differents roms... no luck.
I would really appreciate some help, thanks
can you list the steps of what happened, in order?
also, just to make sure i understand, have you already tried to manually enter the bootloader and THEN run the RUU? *edit* one last question, have you tried this.. after the error, leave your device connected and in bootloader, then restart the RUU.. can you give me your device details too?
Well, when I run the update with normal step (connect AS, then launch update...) when the update is ready to be started (progress bar appears), phone have to switch to bootloader, which it does. However, it seems that the RUU is waiting for that since it return me this error:
ERROR 246 : Device not responding
And I have to exit. I don't understand ?
Progress bar didn't even appear on the phone.
At this time boot loader shows
IPL-SSPL by Des
SPL-1.07.ds
So since I'm already in Bootloader mode, i try to launch RUU again. Here is the error I get when the progress bar appears on both phone and PC :
ERROR 262 : Update Error
And it offer me to recover the device, which I don't need as the current rom has been left untouched and is still functionning after the error.
Then I reset the device to enter bootloader this time:
IPL-0.50
SPL-1.06.0000
same error : ERROR 262 : Update Error
I'm kinda out of option, thanks a lot for your help !
well, it's been a pretty common thing for the RUU to give an error when the device goes in to bootloader (can't detect it for some reason). Most times, simply running the RUU again while the device is still in bootloader works fine.
Why don't you put hard-spl on just in case, manually enter bootloader (which will then be hard-spl) and run the RUU again. You shouldn't enter the bootloader manually unless you've loaded hard-spl or sspl on to your device. From what i understand you won't be successful from what you did after the hard reset. When your phone went in to bootloader the first time, it was with SSPL pushed to your device by the updater program to enable you to update safely. After resetting, you're back to your normal bootloader which won't help anything.
I know one time it did this to me, and wouldn't connect to my device. I started the RUU about 3 times in a row with my device on bootloader, and for some reason after the 3rd time it suddenly worked.. weird, i know.
anyway, hard-spl will make the whole process safer.. let me know if it connects or not, i'll see if i can help you troubleshoot
I wanted to install hard-spl, but it runs as a normal RUU and give me exactly the same errors as a normal run update (error stated above).
So I don't see how I could install it
Another thing weird, when I run a official HTC rom update, when the udpdate should start (device enter in boot loader, progress bar appear in bot PC an device), the Trin reset itself and boot as normal... of course the RUU gives an error due to this reboot ...
Same weird behavior with an official Orange rom...
Now I'll try with SSPL...
Oh and thanks a lot for your help
simply try to run twice ROMUpdateUtility.exe after error
Please read carefully what I have posted (and the steps I ran into)...
Already launched again RUU, it gives me an Update Error and the device is stuck on the screen that show the progress bar.
Need to soft reset... I can't launch again the RUU after that since the device is no longer recognised as connected on PC.
I confirm I can't manage to install the Hard SPL, even after laoding Des sspl from the device...
Defintly blocked
At last I have succeeded in upgrading the device. Seems like my bootloader was somehow corrupted or something... after doing another Hard Reset it have installed hard spl succesfully...
I had already done a hard reset before, so I don't understand what happened.
Nevermind, at last i can try wm6
thanks a lot for your help racerx_ anyway
hey no problem.. not sure that i actually helped haha.. but i'm glad you sorted it out. happy flashing!
Might it have been the USB driver on the desktopside ?
Did you see XP recognize and install HTC USB device again, after device disconnecting from AS and going into bootloadermode for first time ?...
Just a thought...
Not sure what it is, but it's happening again, can't update anything as the bootloader seems somehow corrupted.
When i enter bootloader it briefly display the 3 color, then grey screen with "loading" and then the hard spl screen from Olimpo... the only problem I see is that it does no longer display TRIN100, but only little dots (like if it was corrupted)...
Very annoying situation, and I have already done some hard reset, but nothing
So more exactly, where I start DES SSPL or when I enter Olipro Hard SPL (that I installed before WM6), it shows the good infos like :
TRIN100
xxxx
TRIN100
SPL-
But after 1/4 of second, it start loading for a very short moment
and display again the RGB screen with the infos except the "TRIN100" parts are like this ':':':':':':
Anyone has seen this before ???
@cedrick: You have a SD card inserted on this device, right? if so, remove the SD card and try again.
If the SD card is not the problem, then you might have overwriten the memory region where the ModelID is stored. I can help you to recover it if that is the case.
pof said:
@cedrick: You have a SD card inserted on this device, right? if so, remove the SD card and try again.
If the SD card is not the problem, then you might have overwriten the memory region where the ModelID is stored. I can help you to recover it if that is the case.
Click to expand...
Click to collapse
...... well well, that was simple hahaha (and I feel stupid lol).
yes I had my SD inserted (and I remember only now that the last time it worked I had indeed removed the mini-SD).
So, thanks to you I have understood this issue at last !
Muchisimas gracias por tu gran ayuda pof
Now the question is, wtf do u have on this SD card? LOL
Errr that's a good question... maybe it is time to clean those 4go of things (which most of those come from the SD I had on my Prophet, in the top of that)
Anyway, it's a rare specimen indeed... want a copy to play with heh ?
Related
Hello,
I`m trying to get latest lvsw wm6 to the device.
I own the phone since today.
I made the following steps:
Execute ROMUpdateUltility (Hard-SPL)
->Next->Next->Update
From: Image Version 1.16.407.2
to: Image Version 1.20
->Next -> Next
On the phone:
Enterbotloader.exe
"blabla"
YES
On the computer:
ERROR[246]: Device not responding
On the phone:
IPL-SSPL by Des
SPL-1.07.ds
ok,
trying to run ROMUPdateUltility again...
next next next... he shows me the progress bar --> finished! YES!
Rebooting the phone --> same software version as before the update?
trying to update for 2 hours... just to use gps as advertised
please help, i tried the official Update from HTC -> successfull but effects! programs, contacts etc still there, same version number!
messiah said:
please help, i tried the official Update from HTC -> successfull but effects! programs, contacts etc still there, same version number!
Click to expand...
Click to collapse
I've the same problem [246] upgrading unofficial roms like
GSM_1.41.00.11
and
ROM_ING_WM6_2.27
The only upgrade I make successfully is original
htcp3600-RUU_Trinity_HTC_ITA_1-23-408-2_103_6275_1-38-00-11_108
what's wrong ?
P.S.
I test it using activeSync 4.2 & 4.5
Messiah..... Have you read the very first post in the LVSW ROM thread?
I am NOT having ago, just checking, seems you may have miss-understood.
Grab ALL 3 downloads listed there.
Apply first one, and yes there IS NO real visible change to the phone apart from it has been hard SPL'd
Now apply Second one, will go through the same process BUT the Radio ROM is changed and updated
Now Apply the Third and WM6 is installed
The failure you describe is the computer dropping Activ Sync and then "seeing" the phone in Bootloader mode, which is why it take 2 bites of the first cherry, after that all "should " be ok.
I managed to get mine on the first attempt so it is "Me Proof"[TM] and "Just Works" (c)..... however report back if this hasnt helped
yeah, the process you described tells me that you've loaded hard-spl on your phone.. that's all. No WM6 yet...
I have the same problem.
I have Hard-SPL'ed my Orange M700
Then reboot and reestablish Active Sync
Then I have updated the Radio Rom
Then reboot and reestablish Active Sync
and now it's 1.41.00.11 in settings/system/device information
but when i apply
20070527_Trinity_WM6_v2.0.1.1 it uploads then i power on my device and it's still WM5 ?
What am I doing wrong??
Any help appreciated.
This may be a stupid question but have you SuperCID your device before running the updates?
If you go:
Start -> Settings
System
Device Information
What does it say under Radio version? (Just checks the second step has been completed successfully).
Also when you enter the bootloader what does it say on the screen?
akirainblack said:
This may be a stupid question but have you SuperCID your device before running the updates?
If you go:
Start -> Settings
System
Device Information
What does it say under Radio version? (Just checks the second step has been completed successfully).
Also when you enter the bootloader what does it say on the screen?
Click to expand...
Click to collapse
I thought you didn't need to SuperCID the device (http://forum.xda-developers.com/showpost.php?p=1245390&postcount=70)
My radio Rom shows 1.41.00.11
TBH I don't know. But it can't hurt to try it, I SuperCID mine and it flashes perfectly each and every time.
I'm merely trying to make suggestions that may get a result.
Oh, you didn't tell me what the bootscreen said and what version of Activesync do you have on your PC?
While doing the SuperCID upgrade i was wondering: After flashing any of the ROMs do I reboot or power On manually or wait for the device to reboot itself as the message in the SupoerCID tool suggests:
If radio upgrade went fine, wait until your phone reboots and make sure
ActiveSync is enabled again (you should see green icon in system tray)
Click to expand...
Click to collapse
Stupid Q: How can i make the boot screen stay long enough so i can write it down?
My ActiveSync is 4.5 on WinXP
Rummage around in Start--> Setting --> device ID, and version and stuff...... they are there and you get the same info as on the boot screen... and it stay on longer ;-)
Sorry if a little vague but away from phone at the moment......... erkkkkkkkk
/me runs off to find it so this may get edited
akirainblack said:
TBH I don't know. But it can't hurt to try it, I SuperCID mine and it flashes perfectly each and every time.
I'm merely trying to make suggestions that may get a result.
Oh, you didn't tell me what the bootscreen said and what version of Activesync do you have on your PC?
Click to expand...
Click to collapse
I didnt Super CID just followed the instructions in LVSW 's first thread, applied each DL in order and "it just works" (c)
Thanks. That's where i got the infroramtion from b4. I just thought it might be different in the boot screen.
I now did the SuperCID unlocking and did the 3 upgrades again. after the 3rd upgrade i still have:
- WM5.1.342 Build 15096.3.0.0
- ROM 1.23.61.5
- Radio 1.41.00.11
Q again: Do I need to wait after the flashing or do i immidiately press power
(that's what i do when it says finish) or do i soft reset? Or what else?
Thanks for your help.
Hmmmmm just got me phone....... dont ask
Right CE OS 5.2.1413 build 17745.0.2.3
ROM 2.0.1.1
Radio 1.41.00.11
Sooooo.......
a) are you using LVSW (just to be sure)
b) have you grabbed the latest version posted on page 1 of the upgrading thread?
c) I let it restart it self after it finished flashing, it then reclibrates the screen etc etc
Also looks like you havent upgraded anything just yet ... follow the instructions to the letter and it "should" be fine
a) yes
b) yes
c) there might be the problem i waited 2 mins ans as it wasn't rebooting i just used the power button. How long should i wait aftr the WM6 install?
I soft reset mine directly after the screen goes black. So that should be fine.
Maybe it has to do with my boot loader:
When i go to bootloader i see:
IPL-0.50
SPL-1.07.0000
then it starts fading quickly. is this normal? I have the same fading effect when i install ste 2 the radio ROM. but i still have the new radio rom on as it displays as 1.41.00.11
I again tried to use the 2.0.1.1 it uploads very quickly (maybe 2min) and then it's still the "orange" screen and WM5 on reboot and i still have all my data.
What a I doing wrong?
No. Mine stays there right up until the upload to the phone starts.
Then I get a grey background with a blue progress bar.
What happens if you run Enterbootloader on the phone. Then connect it to the PC.
Then run the install program on the PC.
The first process didn't work.
You should have:
TRIN100
IPL-SSPL by Des
TRIN100
SPL-1.07.ds
Hmmmmm if all else fails try a hard reset on your phone and see what versions of what you have after that.
Did you use ANY form of unlocking prior to using LVSW rom?
/me suspects this might be casuing issues
The radio rom zoooooomed up to my phone and likewise the WM6
I cannt remember reseting the phone after flashing.... IIRC it just worked as in it finished then re-started and way hey off it went.
Also FWIW I just used the DL's in the thread without bothering with anyother boot loaders etc... ie extract flies in first DL into 1 folders, run them, ditto DL's 2 and 3.
i need some serious help im desperate at this stage.
ive basically got a htc tytn ii on uk orange
i update the rom to htc standard one which sim locked it
i followed the instruction on how to get it like i got it from orange
which i believe was sucessful. but because it was still sim locked i
thought the hardspl was relocked so i ran that again which failed and ended up on the tri colour screen after which i tought it may still be hardspl locked
so i tried to flash it with the rom again it got to 17% then crashed
now my phone will only boot to the tricolour screen it wont load activesync and if i try a flash it with anyrom it either stays at 0% gets stuck or gets to 1% then the phone restarts.
ive buggered the phone up proper i need some help if there is any for this mess
when i try a rom upload it says error [294]: invalid vender id
this update utility cannot be used for your pda phoe please check your update utility
Did you install Hard SPL?
http://forum.xda-developers.com/showthread.php?t=334679
See if you can install that and then try to reinstall your rom.
this required activesync to be green mine will respond to usb but not activesynce so i cant go any further with the hardspl unlock im stuck on the tricolour screen. and flashing will only go to 1% then restart and the message come up again.
same problem
i have the same problem and i can only get to 1% . i have tried to flash it with several roms using diferent utilities and none seem to work i used hard spl the first time when it failed. HELP PLEASE !!!!!!!
found solution
got mine working here is what i did
run mtty select usb after disabling it in activesync
press enter and you should see cmd>
type boot and when your device restarts it should start in your old rom
run hardspl again
then you need to reinstall your rom
although a word of warning my phone became sim locked after this
worked a treat many thanks it is sim locked just have to wait for the sim unlock for it now
willbyrne said:
got mine working here is what i did
run mtty select usb after disabling it in activesync
press enter and you should see cmd>
type boot and when your device restarts it should start in your old rom
run hardspl again
then you need to reinstall your rom
although a word of warning my phone became sim locked after this
Click to expand...
Click to collapse
no worries
yeah no worries, i was affraid when i locked mine i might have to return it and get anothe orange version but i used some company online and got my code in about 3 days.
oh yeah you will probably need to enter the code in twice, mine said simlocked and then network locked but it was the same code
hello guys, as i have posted in other threads but no one gave me any soultion to my problem so im starting this thread.
ok i have xperia purchased from UK.
im trying hard to use jack's rom 1.07.
i have done hard spl..i started X1_HardSPL, some message showed on xperia i click yes, it restarted my device. and X1_HardSPL gave me error that it cant connect to my phone...i put my device in bootloader mode and it was showing this on colour screen:
KOVS110
SPL-0.72.0000
MicroP1-787
MicroP2-787
then i used the sd card way..i put the jack's rom file in the card after formatting it with fat32 format..i put the device in bootloader and after the colour screen it shows LOADING and i waited for an hour but nothing happen..
2nd way i used was i ran hardspl file again in a folder, it created some temporary files, i renamed the jack's rom to RUU_Signed.nbh and overwrite the file in hardspl folder.....it again restarted my device to bootloader and after coloured screen it showed LOADING and thats it..nothing else..and hardspl file running on pc gave me 260 or 262 error i cant remember..
so anyone kindly tell me what im doing wrong?and how to fix this
thanx
najaf363 said:
hello guys, as i have posted in other threads but no one gave me any soultion to my problem so im starting this thread.
ok i have xperia purchased from UK.
im trying hard to use jack's rom 1.07.
i have done hard spl..i started X1_HardSPL, some message showed on xperia i click yes, it restarted my device. and X1_HardSPL gave me error that it cant connect to my phone...i put my device in bootloader mode and it was showing this on colour screen:
KOVS110
SPL-0.72.0000
MicroP1-787
MicroP2-787
then i used the sd card way..i put the jack's rom file in the card after formatting it with fat32 format..i put the device in bootloader and after the colour screen it shows LOADING and i waited for an hour but nothing happen..
2nd way i used was i ran hardspl file again in a folder, it created some temporary files, i renamed the jack's rom to RUU_Signed.nbh and overwrite the file in hardspl folder.....it again restarted my device to bootloader and after coloured screen it showed LOADING and thats it..nothing else..and hardspl file running on pc gave me 260 or 262 error i cant remember..
so anyone kindly tell me what im doing wrong?and how to fix this
thanx
Click to expand...
Click to collapse
did you do this (prefereble on an XP machine)
Phone Synced with PC
run X1_HardSPL.exe
follow on screen instruction, including after getting the drivers installed on you xp or vista machine installed, so the hardSPL will make the phone in bootloader and make sure it says 100% done on you xperia. and XP VISTA
then put inte bootloader holding down volyme button and power until tricolor screen is shown, and make sure that the imgage.nbh file is named correctly.
'
then it should work.
the most common failure is that the hardspl isnt installed correctly.
najaf363 said:
hello guys, as i have posted in other threads but no one gave me any soultion to my problem so im starting this thread.
ok i have xperia purchased from UK.
im trying hard to use jack's rom 1.07.
i have done hard spl..i started X1_HardSPL, some message showed on xperia i click yes, it restarted my device. and X1_HardSPL gave me error that it cant connect to my phone...i put my device in bootloader mode and it was showing this on colour screen:
KOVS110
SPL-0.72.0000
MicroP1-787
MicroP2-787
then i used the sd card way..i put the jack's rom file in the card after formatting it with fat32 format..i put the device in bootloader and after the colour screen it shows LOADING and i waited for an hour but nothing happen..
2nd way i used was i ran hardspl file again in a folder, it created some temporary files, i renamed the jack's rom to RUU_Signed.nbh and overwrite the file in hardspl folder.....it again restarted my device to bootloader and after coloured screen it showed LOADING and thats it..nothing else..and hardspl file running on pc gave me 260 or 262 error i cant remember..
so anyone kindly tell me what im doing wrong?and how to fix this
thanx
Click to expand...
Click to collapse
DO NOT I REPEAT
DO NOT
use the hardspl custom RUU for flashing roms.
this is from the 1st post of the HARDSPL thread.
http://forum.xda-developers.com/showthread.php?t=431218
NOTE 4: do not use this RUU to flash anything else! this is only intended for flashing the Hard-SPL. use Xperia CustomRUU to flash other ROM images. for example this version: http://rapidshare.com/files/164933503/X1_CustomRUU.zip
Click to expand...
Click to collapse
IF you have finished hard-spl properly it should say 0.72.Olinex, I'd suggest doing hardspl all over again
thanx bro for replying...during hard spl process it never asked for any drivers, i will try this on xo machine and see what happens,
and i dont understand about customs roms, jack's rom is a custom rom right? so which hard spl file do i need ?
najaf363 said:
thanx bro for replying...during hard spl process it never asked for any drivers, i will try this on xo machine and see what happens,
and i dont understand about customs roms, jack's rom is a custom rom right? so which hard spl file do i need ?
Click to expand...
Click to collapse
do the SD WAY, but remember to rename xxxxx.nbh to kovskimg....nbh otherwise it wont load it, se sticky post here in ropm section.
the driver issue is for XP AND VISTA when still in tricolor screen thn vista will install driver needed for hardspl to work (to recognise the device), as i stated the most common is that the hardspl isnt correctly installed.
hope you got it bro..
It sounds like you're getting confused between RUU and NBH
Ruu is the process for upgrading your phone with a new rom.
RUU stands for
Rom
Upgrade
Utility
nbh is the actual rom
there's only one Hard SPL available in the hardspl thread.
Run that again and let it complete, it should work from booloader mode on your phone.
when that is finished and your device in bootloader says 0.72.olipro then you can flash a rom.
If you use the SD Card method the whatever ROM file you choose must be called KOVSimg.nbh and be in the main section (root) of the SD card.
If you want to flash from desktop take the SD card out first.
Download the RUU I linked to in my last post. Extract that and make sure the nbh rom is called RUU_signed.nbh put it inthe ruu folder then start the RUU process.
smaberg said:
do the SD WAY, but remember to rename xxxxx.nbh to kovskimg....nbh otherwise it wont load it, se sticky post here in ropm section.
the driver issue is for XP AND VISTA when still in tricolor screen thn vista will install driver needed for hardspl to work (to recognise the device), as i stated the most common is that the hardspl isnt correctly installed.
hope you got it bro..
Click to expand...
Click to collapse
one too many ks in kovsimg there mate.
thanx guys for replies. i have managed to install the drivers and then i run the hardspl and now its showing :
KOVS110
SPL-0.72.0LINEX
MICROP1-787
MICROP2-707
now i hope it should upgrade it.before doing somthing i want to know after upgrading to jack's rom, the XPERIA logo that comes when starting the device will keep on showing right? the new rom will not remove it?
thanx
najaf363 said:
thanx guys for replies. i have managed to install the drivers and then i run the hardspl and now its showing :
KOVS110
SPL-0.72.0LINEX
MICROP1-787
MICROP2-707
now i hope it should upgrade it.before doing somthing i want to know after upgrading to jack's rom, the XPERIA logo that comes when starting the device will keep on showing right? the new rom will not remove it?
thanx
Click to expand...
Click to collapse
you have windows vista or xp ???
i cant solve this problem with xp
malik bro i have vista, what i did is i connected my device to pc, and without running the hardspl i restarted in bootloader mode (while connected) it automatically installed the drivers when it was in bootloader mode...
after that i restarted my device then i did the hardspl
and now i finished upgrading to jack's rom..job done.!!
now i have 2 problems.
first the panel is gone...how to install it?
2nd the xperia logo what comes in start is also gone...how to install it bcz i need it very much.
thanx
najaf363 said:
now i have 2 problems.
first the panel is gone...how to install it?
2nd the xperia logo what comes in start is also gone...how to install it bcz i need it very much.
thanx
Click to expand...
Click to collapse
read #2 post @ jack's ROM thread
Some cabs and extra files you may need.
1. X1 Panel package to add panel back (divided into sub cabs)
extract the .rar file then it'll show you the panels cab
install Jack Sony X1 Panel Main.cab first then u can install other panels
sorry cant help you with the xperia logo
ok i want to get back to my stock rom..is there anyway to do that?
how to remove this rom so i can install the orignal rom, by connecting with SE software update utility?
this rom is fast stable but its not only me how use this device.so others dont like the way programs and startmenu are showing.
Usb-driver
I have the same problem when trying to flash with XP. I have tried two different computers but have the same problem. It seems that there is some usb-drivers missing. One time i got an error in XP when rebooting the X1 that the usb-device not working correct.
Can not flash by computer
Can not flash using card
The problem occurs when trying to install ROM
Result: When running RUU. Reboot= OK, Tricolour =OK, Process freeze after "loading" apperas (when *.nbh is supposed to start loading.) SPL never finish.
Anoyone knows which driver i need?
don't forget to disable any firewalls and possibly antivirus... This was the problem for me when using Hardspl and Zonealarm suite... So switched off Zonealarm and Hardspl just worked.... [oh and any windows firewalls]
Will try again tonight without FW and antivirus...
However... i have successfully upgraded ROM using SE Update software earlier... The USB worked fine at that time.
najaf363 said:
ok i want to get back to my stock rom..is there anyway to do that?
Click to expand...
Click to collapse
Yes. Just download the generic ROM from the ROM thread and follow the exact same steps as for a custom ROM. Also, look for answers yourself before asking questions that have answers stickied
Spiff76, SE update uses a different way to access your phone. hardSPL can be considered a "hack", which is why antivirus etc. might detect it.
Hmmm... turned of FW and antivirus but same result. RUU freezes after reboot and tricolour. When phone is supposed to start loading new ROM it just freezes and i get a connection-error message.
I believe it has to do with the usb-connection but i can not figure out how to solve it. Have also tried ti install via card without any luck. Same problem remain... i can not get the SPL to finish.
Have any one experienced similar problem and how was it solved. It can not be a biggie but it is really ***.
As said, running this on XP. USB works fine with active sync and in usb to PC-mode.
Spiff76 said:
Hmmm... turned of FW and antivirus but same result. RUU freezes after reboot and tricolour. When phone is supposed to start loading new ROM it just freezes and i get a connection-error message.
I believe it has to do with the usb-connection but i can not figure out how to solve it. Have also tried ti install via card without any luck. Same problem remain... i can not get the SPL to finish.
Have any one experienced similar problem and how was it solved. It can not be a biggie but it is really ***.
As said, running this on XP. USB works fine with active sync and in usb to PC-mode.
Click to expand...
Click to collapse
Most probably YOU HAVE NOT DONE THE HARD-SPL FLASH FIRST
Please CHECK your tricolour screen: the world "olinex" must be there, which means you correctly flahsed the "olinex HARD-SPL" to your device
READ again. It's all written there (sticky posts)
First of all why should i ASK if there WAS AN ANSWER TO BE READ???
I have:
1. Tried to flash using exact intructions in:
http://forum.xda-developers.com/showthread.php?t=431218
Yes, the STICKY POST!
2. I have tried to flash from card whit hard_SPL:
http://forum.xda-developers.com/showthread.php?t=445662
Yes, again the STICKY POST!
And of course:
http://forum.xda-developers.com/showthread.php?t=446070
I have changed cables, ports. The flash seems OK, it says "olinex" in boot-loader but it has never finished.
Have searched the forum for other similar problems and found this thread.
I do not feel the need of repeating myself. Was hoping for some help and answers...
Hi.
today i bricked my kaiser when i tried to install a dutty's rom
been trying to get this fixxed for over 5 hours. nothing worked out.
used kaisdiag.nbh from h ttp://forum.xda-developers.com/showthread.php?t=420683
in both suggested solutions my kaiser wont go further then the Loading page. ( waited atleast 10 mins twice without any success)
used some other RUU installs while in the tricolour screen:
ahmedfikry wm6.5 23549 Tilt UC light rom
KAISER_WM65_OS23547_PP12MB_Sonblack05
RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship
RUU_Kaiser_HTC_WWE_3.02.405.0_radio_sign_25.70.30.05_1.58.26.20
Ruu_Signed_Duttys_WM6.1_5.2.19700_Hybrid_V2_1_64.08.21_CubeV2_ <== the one wich bricked my phone
Ruu_Signed_Duttys_WM6.1_5.2.19700_Hybrid_V2_1_65.14.06_No_CubeV2_
RUU_Kaiser_TMO_UK_3.31.110.3_radio_sign_25.83.40.02_1.70.18.02_Ship
some other topic sugested to use MTTY.
but that probram says: usb port cannot open.
long story short: im desperate.
can any of u please help me fix my phone ?
its an MDA vario II. model Kais130 P/N 99hcy063-00
thanks in advance.
i'm no expert at recovering bricked phones...
but what i understand is that IF you have a hard SPL (which hard SPL do you have?), then you should be able to recover your device from nearly any situation.
try this...if RUU is not working well, try to flash using the SD card method.
also, try to flash a stock ROM (using RUU as well as using the SD card method). let us know what happens.
Try putting your phone into bootloader, ( press and hold power and camera buttons while doing a soft reset ) once it is in the " tri-color " screen, let us know what it says on the screen.
thanks for your time and the fast response, to both of you.
@#1
i used Pofs hard spl.
and as mentioned above i tried both the RUU way and with my micro SD card.
the SD way only shows me the 'Loading' screen. over and over.
and with the RUU i get several errors. connection errors at 0% and connection errors some later.
some roms just say they wont work on my phone.
and others just reboot my phone.
@#2
i think my phone gets to the bootloader all the time. cause i c no difference when resetting with camera and power button on.
its the tri color screen with the folowing information that shows up:
RUUNBH
Kais130
SPL-1.56.0000
CPLD-8
serial/USB
______________________
the serial shows up when the phone is not connected.. and the USB shows up when its attached to my pc with usb.
Any other suggestions ?
Thanks in advance .
You don't have hard-spl you still have a stock, flash the stock ROM of your carrier from bootloader.
Then follow the noobs guide to flashing.
Thx guys my phone is working like it used to be.
downoaded the original rom from t-mobile again. and again.
now got one wich is working.
thanks for your help.
i was about to throw the brick trough the window.
Hi everyone,
i've got a problem... i have tried to flash hardspl (bootloader) on my x1 but it doesnt work.
i have tried it like i read in the forum in different threads but i cant enter bootloader and when i start hardspl on my pc and take step by step as the program says... after the progression bar came - my phone display goes black and the front panel starts to shine and after a time i get a connection error on the hardspl program...
can anybody pls help me????
did you take out your micro sd card out of your phone?
That was my problem...........
I too have the same problem. I follow the instructions and HardSPL checks my x1. Then when I hit update (the rom). It gives me either error 202 or 246. Not sure why. Anyone?
EDIT: Problem persists with or without sdcard
hard spl
hi
i had some problems !
here is the best info
try every thing and search and read what i understud was that some phones have different ways to get in to the right hardspl mode i all most gave up and then it workt
DONT GIVE UP I WAS ON IT FOR 2 WEEKS
THE WORST THING IS I DONT REMEMBER WHAT I DID SORRY !
HASSE
tilsid said:
I too have the same problem. I follow the instructions and HardSPL checks my x1. Then when I hit update (the rom). It gives me either error 202 or 246. Not sure why. Anyone?
EDIT: Problem persists with or without sdcard
Click to expand...
Click to collapse
Several time ago i got that error too, but i never give up. Try another hardspl for xperia, when u click it, it will auto generate to extract some file, just click romupdate utility and follow the same procedure.
If still got some error, try install it from a fresh computer with usb 2.0 installe and active synch.
You just got that error becouse there is some miss connection with another usb device.
UPDATE: it worked
So I did a hard reset on the phone (settings-> clear storage) and then tried again. Worked like a charm. Installing ROM right now!
Thanks everyone!
Moved to X1 Q&A as not Rom Dev
it still not work...
i have tried all you write me...
no it says first "no file found" and trys to update over usb and than it says again connection error...
what shall i do?