Database Develop

i-mate KJAM stuck on bootloader

Hello everyone,
First - I'm really happy to have found this resource. I had no idea about all the cool things I could do to my phone. Thanks to everybody for all your hard work.
I spent a lot of time reading up with the goal of upgrading to a Windows Mobile 6 ROM. But now I need some help please, because I can't get my phone back!
I determined that my phone is a G4 (IPL/SPL of 2.16.0001). I attempted to load various WM6 Roms (TNT 4.0 Official and XDA Mobile 6), without success (error 300). Eventually, I succeeded in loading Wizard Love 2.26.10.2, and booted into Windows successfully. I then tried to load TNT 4.0 on. It got up to 100%, rebooted - and now I am stuck on the RGB / bootloader screen. Plugging in USB cable gives me the USB txt in the bottom left, but no response from the computer. The various RUU utilities I have tried to restore the phone back to Wizard Love or official iMate ROMs all fail - they can't seem to find the phone.
I would greatly appreciate any help. Thanks you in advance.
Regards,
Nick

Progress!
More research led me to find that WinXP should be able to install a new ROM without ActiveSync - in fact, you need to disable ActiveSync USB connections and end wscecomm.exe via task manager.
These steps allowed me to attempt flashing of a new ROM:
1. Uninstall device from device manager
2. Turn off device completely
3. Disable USB in ActiveSync
4. End process "wscecomm.exe" via Task Manager
5. Plug in phone, windows will detect and install as a Windows CE. This will make wscecomm.exe load again. End this before running the RUU tool
6. Run RUU. When detecting your phone, it will run wscecomm.exe. I kept ending it and crashing the RUU . RUU stops it itself.
7. Finally my phone was detected and I was able to proceed to flashing without an RUU error. Previously, i was getting error 260, 264, 300...
I was greedy and attempted to load XDA Mobile 6. It got to 99% and crashed. I will try and get back to Wizard Love.
If somebody could tell me what I am missing / doing wrong that would be great. To summarise:
- I have been able to install Wizard Love
- I have a G4 i-mate KJAM
- TNT 4.0 has reached 100%. On reboot, I only got boatloader.
- After many hours trying to fix, I finally was able to attempt to flash XDA 6 r2. It reached 99% before crashing
I will now try to put Wizard Love back on, but I really want to run WM 6.0 and am not very concerned about which flavour. Thanks for your help

No...You shouldn't use RUU for upgrading to WM6 because your G4 is not unlocked (You need to pay to unlock a G4, however it is not required if you don't use RUU).
Flash to Wizard Love, then get a copy of ShellTool and use it to flash the nk.nbf inside WM6 RUU.

no worries. I have the same phone and running XDA r2a, so it can be done!
Simply get hold of G4_step_by_step_install_wm6 I think theres a link to rapidshare on this forum, try search. (I will try get the link later on.) Follow the steps and it has shelltool which will extract th OS for and you can then install. Make sure you get the splash screens from XDA thread so you get the full package.
Good luck
G4_step_by_step_install: http://rapidshare.com/files/22275022/G4_step_by_step_install_wm6.rar.html
link: http://www.megaupload.com/?d=VRYOZ4GO
Read this: http://forum.xda-developers.com/showthread.php?t=293480
You need this: ftp://xda:[email protected]/Uploads/WIZARD/Unlocking/ShellTool_bugfixed.zip
G4_step_by_step_install_wm6 will give u step by step guide on what to do.

Thank you
Hey guys - thanks so much, I can't wait to get stuck into it.
You know I spent my whole weekend getting into this stuff and I'm sure I have only just scratched the surface!
I think it's fantastic that so many of you put so much work into this, and then also have time to guide people through the process.

Regarding the FTP links throughout these forums - They never seem to work for me. I get an error 550 - failed to change directory. These are links with usernameassword of xda:xda. The only link that worked had something different, along the lines of xdaupload:xda, can't remember for sure.
What am I doing wrong?

Just get the G4_step_by_step, forget everything else. Its on rapidshare. It has even a WM6 Rom in it so you can even that on your Wizard. But you can install XDA R2a also by following the step by step guide and knowing what to replace. Have you downloaded it? Its about 75MB but well worth every bit of it! You wont need anything else after that.
We learn from each other! Thats why we help others so they help us too

cochumbo said:
Regarding the FTP links throughout these forums - They never seem to work for me. I get an error 550 - failed to change directory. These are links with usernameassword of xda:xda. The only link that worked had something different, along the lines of xdaupload:xda, can't remember for sure.
What am I doing wrong?
Click to expand...
Click to collapse
The forum carried many ROMs before. Micro$oft had some opinion on this and hence the ROMs were all removed. Most of the 550 errors would be due to this.
kernelguy

Some help please

I've been reading and trying this for days with no luck. I've fully unlocked my wizard and I'm now trying to flash to the 318 rom. But I have no clue how to do it. Could someone walk me through ho to do it? Most of the flashing done thus far has been an EXE file or through DOS. I must be missing something simple.
please help

follow this thread, enjoy
http://forum.xda-developers.com/showthread.php?t=298613

mikaarce said:
follow this thread, enjoy
http://forum.xda-developers.com/showthread.php?t=298613
Click to expand...
Click to collapse
I followed that one already. That's how I unlocked it. But all step 3.8 says is "your ready to flash...". Right now I don't understand exactly how to flash and I'd prefer not to "trial and error" it.
However, this morning I did open up the Hypercore kitchen and I think I'm on the right track. I'm at work so I can't try anything but I've printed up everything in that thread including all it's links and I'm going to give it a go once I get home. I'll report back once that's done.

Alright, after some more research and reading in the hypercore kitchen thread and all it's links, I think I may have it figured out.
I download and extract the files for the ROM I want, in this case 318 8.1 from theloon.
I then follow the instructions linked int he hypercore thread with dumping, and the pkgtool, buildos, etc.. If followed correctly, my wizard should be flashed with the new rom correct?
A confirmation would be nice. Any other comments you have are a bonus.
Another question though; what's the difference between the programs contained in the SYS and OEM folders compared to the ones in the build OS that i have the select? Aren't the ones in the folders already included in the ROM?
Your help would be greatly appreciated. I don't get confused too easily so as you can imagine i'm quite frustrated. I used to flash new versions and programs to my Razr but it was nothing like this.

dont get me wrong are you trying to cook your own rom, because hypercore is a kitchen, i suggest you download one of the roms that are made by reputable cooks, like the NBD series, TNT series, paradox, xmr, faria's, ingenetics, octavio's they differ in the apps and costumization included in the os and the builds, so just select download and flash
there's an executable file inside the roms once you unzip it and be careful if your using xp or vista

The only things I've been working with up until this point is BuildOS and nb2nbf. I haven't fully grasped the definition of "cooking" yet; whether it means altering files for my self or if the BuildOS selection list is considered cooking.
I think i was trying to do too much and using a file different from the one being referenced in the tutorial was a bit confusing. So to start, I decided to use Faria's Crossbow and the tutorial that came with it. It was very easy and I was able to flash my Wizard to that ROM without a problem. But the one i really want is Theloon's 318.
So, based off of what I learned last night I figured I just needed to replace the OEM, ROM, and SYS folders that came up when I unzipped Faria's crossbow with the ones from 318. Is this correct? Because I just tried that this morning and I get all the way to the CMD prompt right before it opens nb2nbf and it gives me an error (see attacment). If there's one thing I've learned from all these bricked devices floating around, it's to NEVER proceed when an error occurs.
What does this error mean? How can I fix it? Is my moving of the folders wrong? What am i missing?

just messin around trying to see what tools work, i got another error.

Ok, now I've got a bigger problem. I finally figured out what I was doing wrong. It's actually a lot simpler than I thought. i was just making it more complicated. Ok, I tarted the flash and at about 47%, it gave me a memory reference error. Now my Wizard won't go past the three-color screen and all it shows is my IPL/SPL 3.08. ActiveSync won't detect it, tried hard resetting, turning on while holding camera button, etc. What do i do now?

Now you start thinking... "Maybe I should have read the stickies on the Upgrading forums... bummer..."
The 3 color screen is called the BootLoader. As long you get that screen, your phone can be recovered. How to recover it?
- Use a Windows XP PC.
- Download Wizard_Love Rom (its somewhere, use google or search the forum, but then again, you wouldn't be having this problems IF you knew how to use the search button!)
- Press and hold CAMERA button and hit the reset, keeping the camera button pressed.
- Connect the Wizard to your pc using the USB cable.
- Start the Wizard_Love RUU utility that comes with it.
- Just press next until it starts flashing the ROM to it.
- Pray for it to finish without touching anything until the RUU says CONGRATULATIONS.
There... your phone is working again.
READ THE STICKIES BEFORE DOING ANYTHING AND USE THE SEARCH!
THIS QUESTION HAS BEEN ANSWERED FOR TOO MANY TIMES ALREADY!!!
PS: Maybe we should create a thread for helping the guys that don't follow stickies or care about the ALREADY info we have here... something like:
- 3 color screen: do this
- different IPL/SPL G3 on a G4 device: you are screwed.

I definately read the stickies over and over again. I've got a stack of printouts sitting in front of me that I've been reading for the past week.
I understand your frustration about questions like this but that's no reason to be rude. I used to be a moderator on pbnation.com so I know exactly how you feel. But the fact of the matter is that I'm not as familiar with these things as you are. I fixed the bootloader issue before I even read your response. i found the answer by re-reading one of my printouts that said the re-flash with official rom. So i did that and it worked. I knew I'd get flamed for posting but since I had already had a thread created, I figured it wouldn't hurt to post updates on my status.
I know how to flash roms now. It's actually quite easy. However, I ran into some issues that I'd like to explain in hopes that you realize I'm not taking advantage of you or not utilizing the tools and stickies.
i was having problems yesterday because of my work computer (I think). When extracting the files from Hypercore, they were not placed where they should have been and the tools wouldn't work properly. An example would be when opening buildOS it would give me the yes or no prompts. An IT friend allowed me to use his non-work laptop to do the exact same thing and I was able to use it without a hitch. The simple tmobile official rom update wouldn't even work on my work computer. So it's not just me.
I knew there was a reason that i couldn't follow it.
Regardless of your approach, I still thank you for your help.

I didn't mean to be rude... sorry about that. Its just that from your post count I thought your were like a newcomer like those that come here all the time, asking the same questions over and over again. Netherless, sorry for "helping" you the way I did.
I will have some tea now to relax care to join?

Did I just brick my Boss' 750? Help needed

So, in an earlier post I had asked about downgrading to WM5 from AT&T WM6because my bossman lost all his beloved Windows Live capabilities.
I grabbed a Congular WM5 ROM, from a link here, did the image load from SD.
It said to me Update Complete, Update Successful, but would not boot to the OS. It would simply hang at the PALM splash screen with the grey indicator bar running 99% of the way at the bottom, then hanging.
This did not please me.
So I then started messing around with the available WM6 ROMs, like the AT&T SD install, and the ROW updater renamed from CHEEIMG_FW to just CHEEIMG to load from SD, all to no avail. Again it is just hanging at the PALM splash screen with the OS load bar hanging at about 99% completion.
I let it sit for about an hour, and it just hangs...
I am guessing it is not bricked, due to the fact that I can still get to the bootloader screen and load an image successfully... however it goes no further than that.
Any help would be GREATLY appreciated. And I would be willing to name my first born after the person who can tell me how to resolve this.

look for a new job...

On Palm's support page they have a recovery tool - see http://www.palm.com/au/support/treo750/downloads/wm6update.html .
Maybe this will help you keep your job!
I upgraded using the Telstra version and had no issues except for not being able to run iGO My Way 2006.
Cheers

renamed from CHEEIMG_FW to just CHEEIMG to load from SD
Just to verify, You should rename to "CHEEIMG.nbh" then load........

unkabuzz said:
renamed from CHEEIMG_FW to just CHEEIMG to load from SD
Just to verify, You should rename to "CHEEIMG.nbh" then load........
Click to expand...
Click to collapse
Make sure your file explorer shows file extensions to do so...

Also, there is an install for Live on WM6 available for download. I had posted the file in another thread - you can find it by searching. Also, if you search the entire site, there is at least one lengthy thread devoted to the various releases of Windows Live for Mobile. This should have been the last reason for your boss to want to downgrade to the earlier WM5 version.

Best way to change splash image?

hey, I have searched and searched, and tried various methods of changing the image before the IPL and SPL are shown, and also the image whilst the IPL and SPL are shown, however nothing has been successful. I want to change them because I have flashed a new ROM onto my Wizard but the old images remain.
Which is the most efficient and easy way to do this?
Thanks

Surely somebody must know how to do this. I have tried about 4 ways now, and nothing damn works!!!!
Please, somebody must have changed the splash/boot screen with Wm6.1

Maybe....
Maybe you dont get the exactly size of the pictures please visit my sky drive and download the files zip that said 3 splash screens read carefully the instruction on .txt i already change my 3 splash screens but when I exceed the size the screen doesnt change... There i have too the original splash screens and some from my creation....
http://cid-f13430056005795d.skydrive.live.com/browse.aspx/HTC

3 Splash screens bricked wizard
Hi
I downloaded your 3 splashscreens zip file and use the tools carefully step by step to create the nk.nbf file to flash to my wizard. When I run the RUU all seemed fine, up until 66% at which point the process freezes on the device, after a while the pc screen moves to 83% then reports a communication error and starts taking me through a "Recovery" process (taking battery out etc.) when that's done, all I get is the bootloader and have to re-flash my rom to get the phone working again.
Any ideas why this may be? I'm using XP to do it, have tried a replacement new usb cable, but that made no difference.
Edit: I tried again with your images and it worked! Now have HTC default splash at startup but grey-black fade is very banded and looks dreadful. Will have to try a different ones.

Tut
Here's a little tutorial and the zip provided by + Que PPC...
http://forum.xda-developers.com/showthread.php?t=284006&highlight=bootscreen
Hope it helps!

[Q] Problems after a dodgy install.

DaveShaw Edit:
Split the thread from the NBH Extract thread.
Hi there!
First off all thanks for the great help and all the hard work you all doing!
Keep on going!
I have problem extracting my "RUU_signed.nbh" file using the the "NBHextract" tool. The "nbh" file I need is from the:
"RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship" Rom.
I'm trying to extract with the CMD, or trying to drag & drop the "RUU_signed.nbh" onto the "NBHextract", its says in the CMD: extracting. Bat in fact, noting happens! There only the same 2 file in the folder and nothing else.
Can any one help?
Maybe some of you can tray to extract the file and upload the result to www.rapidshare.com or somewhere else?
I'm using desktop with XP PRO English.
Please! I'm going crazy!

Shaico said:
Hi there!
First off all thanks for the great help and all the hard work you all doing!
Keep on going!
I have problem extracting my "RUU_signed.nbh" file using the the "NBHextract" tool. The "nbh" file I need is from the:
"RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship" Rom.
I'm trying to extract with the CMD, or trying to drag & drop the "RUU_signed.nbh" onto the "NBHextract", its says in the CMD: extracting. Bat in fact, noting happens! There only the same 2 file in the folder and nothing else.
Can any one help?
Maybe some of you can tray to extract the file and upload the result to www.rapidshare.com or somewhere else?
I'm using desktop with XP PRO English.
Please! I'm going crazy!
Click to expand...
Click to collapse
I'm lost sorry
Have you downloaded the exe and need the NBH File? If so Install WinRAR, right click the exe and click Extract...
If you have the NBH file, then I suggest you re-try the steps you quoted again. Let me know if there are any errors on any steps.
Ta
Dave

DaveShaw said:
I'm lost sorry
Have you downloaded the exe and need the NBH File? If so Install WinRAR, right click the exe and click Extract...
If you have the NBH file, then I suggest you re-try the steps you quoted again. Let me know if there are any errors on any steps.
Ta
Dave
Click to expand...
Click to collapse
Well, I did those steps before, bat have no result. Don't see any error at the CMD. only show me the extract progress and at the end (after 2 min), there are no result! Only the same 2 file I started the progress. (RUU_signed.nbh + NBHextract tool)
I have the NBH and need to extract it... So I can continue to step 6 at these guide: Reverting back to the AT&T or HTC ROM and SPL for Warranty or return http://forum.xda-developers.com/showthread.php?t=335568
Can any one trey to extract the RUU_signed.nbh from
RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88 .07_1.27.12.11_Ship" Rom for me and upload the result?
Thanks in advanced!
Ok, update! I try to extract this in vista by drag & drop, and it worked!!! Bizarre...; and I got 5 file from the extract. The CMD still didn't work in the vista though...
Bat now i'm confused, because I read on other thread that I need to do Hard SPL first so I don't brick my TyTn 2 device... and in the guide:
(http://forum.xda-developers.com/showthread.php?t=335568),
its says I don't need to do Hard SPL. So what should I do?
let me tell you the reason I want to flash the SPL: I install Hebrew support pack that I download from the net and it work ok till I start to notice a rapidly massage of low memory (I didn't install nothing else!), bat the most reason fact that I want to flesh the SPL is because in addition of that message, the cracked Hebrew pack, showing me the logo of the company that made the pack; every time I restart the device, just before the HTC welcome logo and its showing for at lest 30 sec!!! Every soft reset!! So I try to uninstal that pack and its still showing every restart! Even, try to up grade to WM6.1, and still its there!!!! So I start to read some thread and think I need that spl flash so I can get rid of that "sticky" logo that slow my device and steal my memory!!
Can any one now something like that issue, and what shold I do in order to uninstall that long logo?

Shaico said:
Well, I did those steps before, bat have no result. Don't see any error at the CMD. only show me the extract progress and at the end (after 2 min), there are no result! Only the same 2 file I started the progress. (RUU_signed.nbh + NBHextract tool)
I have the NBH and need to extract it... So I can continue to step 6 at these guide: Reverting back to the AT&T or HTC ROM and SPL for Warranty or return http://forum.xda-developers.com/showthread.php?t=335568
Can any one trey to extract the RUU_signed.nbh from
RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88 .07_1.27.12.11_Ship" Rom for me and upload the result?
Thanks in advanced!
Click to expand...
Click to collapse
Ok, update! I try to extract this in vista by drag & drop, and it worked!!! Bizarre...; and I got 5 file from the extract. The CMD still didn't work in the vista though...
Bat now i'm confused, because I read on other thread that I need to do Hard SPL first so I don't brick my TyTn 2 device... and in the guide:
(http://forum.xda-developers.com/showthread.php?t=335568),
its says I don't need to do Hard SPL. So what should I do?
let me tell you the reason I want to flash the SPL: I install Hebrew support pack that I download from the net and it work ok till I start to notice a rapidly massage of low memory (I didn't install nothing else!), bat the most reason fact that I want to flesh the SPL is because in addition of that message, the cracked Hebrew pack, showing me the logo of the company that made the pack; every time I restart the device, just before the HTC welcome logo and its showing for at lest 30 sec!!! Every soft reset!! So I try to uninstal that pack and its still showing every restart! Even, try to up grade to WM6.1, and still its there!!!! So I start to read some thread and think I need that spl flash so I can get rid of that "sticky" logo that slow my device and steal my memory!!
Can any one now something like that issue, and what shold I do in order to uninstall that long logo?

Shaico said:
Ok, update! I try to extract this in vista by drag & drop, and it worked!!! Bizarre...; and I got 5 file from the extract. The CMD still didn't work in the vista though...
Bat now i'm confused, because I read on other thread that I need to do Hard SPL first so I don't brick my TyTn 2 device... and in the guide:
(http://forum.xda-developers.com/showthread.php?t=335568),
its says I don't need to do Hard SPL. So what should I do?
let me tell you the reason I want to flash the SPL: I install Hebrew support pack that I download from the net and it work ok till I start to notice a rapidly massage of low memory (I didn't install nothing else!), bat the most reason fact that I want to flesh the SPL is because in addition of that message, the cracked Hebrew pack, showing me the logo of the company that made the pack; every time I restart the device, just before the HTC welcome logo and its showing for at lest 30 sec!!! Every soft reset!! So I try to uninstal that pack and its still showing every restart! Even, try to up grade to WM6.1, and still its there!!!! So I start to read some thread and think I need that spl flash so I can get rid of that "sticky" logo that slow my device and steal my memory!!
Can any one now something like that issue, and what shold I do in order to uninstall that long logo?
Click to expand...
Click to collapse
OK I see what your getting at... Some facts first...
1. The guide you posted a Link to advises how to restore the Stock SPL and ROM if you have Hard SPL and a custom ROM. It does not mention Hard SPL for the simple fact that it is a guide on how to remove it (assumes you have it otherwise you wouldn't be reading the guide).
2. The SPL is the bootloader similar (in ways) to your PC's BIOS. I am pretty certain it has not been comprimised.
Firstly we need to know which splash was changed. There are 3 possible splashes that could have been changed. Have a look at this guide by -888- on upgrading you splash.
It is most likley to be one (or both) of the last two. Changing the first one requires Hard SPL and Flashing.
Rather than fixing the splash screens, I'd do a Hard Reset that will remove everything that was not part of your original OS ROM image.
If it is still there after that, I'd flash HardSPL and then flash a new Splash screen.
And, finally , this forum does not support cracked software, I will help you remove it however, if you promise to pay for it in the future
Ta
Dave

DaveShaw said:
OK I see what your getting at... Some facts first...
1. The guide you posted a Link to advises how to restore the Stock SPL and ROM if you have Hard SPL and a custom ROM. It does not mention Hard SPL for the simple fact that it is a guide on how to remove it (assumes you have it otherwise you wouldn't be reading the guide).
2. The SPL is the bootloader similar (in ways) to your PC's BIOS. I am pretty certain it has not been comprimised.
Firstly we need to know which splash was changed. There are 3 possible splashes that could have been changed. Have a look at this guide by -888- on upgrading you splash.
It is most likley to be one (or both) of the last two. Changing the first one requires Hard SPL and Flashing.
Rather than fixing the splash screens, I'd do a Hard Reset that will remove everything that was not part of your original OS ROM image.
If it is still there after that, I'd flash HardSPL and then flash a new Splash screen.
And, finally , this forum does not support cracked software, I will help you remove it however, if you promise to pay for it in the future
Ta
Dave
Click to expand...
Click to collapse
First off all, thanks for the help. I appreciate it!
I must mention that I buy the original version in advanced. I just was curious to check the net version and it turns out that it's not so good... to such an extent that I ruin me Kaiser...
now let me be more specific with me problem because i m not sure I explain the problem clearly and I don't want to start a progress that I don't know how to do....
So, like I say, after I finish the install of the language pack, I had to clear storage in order to crack the license. But since that, every restart, appear the logo of the software company for 30 sec!!! Every restart!!!! Its make me crazy!!!! (The logo appear just before the HTC logo load. (It's appear with the rom and the radio version = R.G.D). But this is not the main problem!! The most important problem is that since the install, its keep say me that I'm run out of memory, and I m even didn't install nothing!!! This is bad!
So off Corse I'm try to do hard reset and even try to upgrade to WM6.1, but the cursed logo is still there!!!!
Now, after I try to explain the problem, I want to know if the solution you recommended may solve the logo problem and more important the memory "leak"....
What I basically want is to bring me Kaiser to its original status like from "out of the box"... because it's only 2 week old!!!!!
I'm hope you understand me problem.
Thanks you in advanced!

Shaico said:
First off all, thanks for the help. I appreciate it!
I must mention that I buy the original version in advanced. I just was curious to check the net version and it turns out that it's not so good... to such an extent that I ruin me Kaiser...
now let me be more specific with me problem because i m not sure I explain the problem clearly and I don't want to start a progress that I don't know how to do....
So, like I say, after I finish the install of the language pack, I had to clear storage in order to crack the license. But since that, every restart, appear the logo of the software company for 30 sec!!! Every restart!!!! Its make me crazy!!!! (The logo appear just before the HTC logo load. (It's appear with the rom and the radio version = R.G.D). But this is not the main problem!! The most important problem is that since the install, its keep say me that I'm run out of memory, and I m even didn't install nothing!!! This is bad!
So off Corse I'm try to do hard reset and even try to upgrade to WM6.1, but the cursed logo is still there!!!!
Now, after I try to explain the problem, I want to know if the solution you recommended may solve the logo problem and more important the memory "leak"....
What I basically want is to bring me Kaiser to its original status like from "out of the box"... because it's only 2 week old!!!!!
I'm hope you understand me problem.
Thanks you in advanced!
Click to expand...
Click to collapse
Do you have a storage card? I wonder if it flashed off the storage card? Anyhow, let's get busy...
Firstly remove anything you want to keep off the card and then format it.
Then flash the Hard SPL using the instructions here: http://forum.xda-developers.com/showthread.php?t=396922 (Second set of instructions in post #2).
Once, you have completed the flash, enter the bootloader before Windows Mobile loads.
Then, when you are in the bootloader flash a New ROM and Radio.
Hopefully that will remove everything that shouldn't be there.
Also, moving out of pof's thread. To a new one
Ta
Dave

DaveShaw said:
Do you have a storage card? I wonder if it flashed off the storage card? Anyhow, let's get busy...
Firstly remove anything you want to keep off the card and then format it.
Then flash the Hard SPL using the instructions here: http://forum.xda-developers.com/showthread.php?t=396922 (Second set of instructions in post #2).
Once, you have completed the flash, enter the bootloader before Windows Mobile loads.
Then, when you are in the bootloader flash a New ROM and Radio.
Hopefully that will remove everything that shouldn't be there.
Also, moving out of pof's thread. To a new one
Ta
Dave
Click to expand...
Click to collapse
I'm sorry, it didn't help! Or I didn't understand the mining of the post! so I follow the instructions and then what? Nothing change! It's all the same! I can't see any different! What else can I do? How can I erase all the data include all!! Data!! And start again and make it brand new again? Im just want this logo to go away!! How do I make my Kaiser new again with no foreign files that no came with me device from the factory! I want to Cray!! I can't help it any more! Please help.
Can you please help me live? Can we kindly chat in the messenger? I'm lost of me mind with all this posts and cant mange this alone!
Thank you in advanced!

Anyone can please help?

Hi, sorry for the delay.
The instructions in my last post should get you back up and running. You'll have have to read up on the wiki and the ROM Development stickies for more help.
I am at work now, and am pressed for time at the moment, have a look on #xda-devs chanel on FreeNode after 8-9PM (GMT) for me. I'll be able to chat then. (I am also on MSN, but I don't use it at home that often. I'll try and make an effort over the next few days.)
Ta
Dave