Database Develop

New Rom: Tmobile UK: BA_TMUK_14200_112_11300

http://t-mobile.iris-global.com/files/BA_TMUK_14200_112_11300_Ship.exe
Seems to have appeared as the FINAL offical release from t-mobile for uk users.
I've not tried it yet but the number does seem to suggest it is a slightly lower version than the Dutch one
EDIT MDAIIIUser
Added to wiki

no surprises
build of 2003se identical to Dutch rom previously released:
version 4.21.1088 (build 15159.2.6.4)
Extended rom just hasth changed regional settings (english UK default)

Added to wiki

Still a lot of echo.
Can't pair my Motorola HS820, BA sees the HS820, but error on connecting.
Anyone a fix for the echo and for the BT problem?
Use 1.40 before, was less a problem compaired to 1.42
Please help.
Regards,
Max

Report Back - T-Mobile Rom.. One week or so on..
Hi All,
Wanted to feedback my impressions of the new 1.42 T-Mobile UK Spec Rom..
Well, it's been interesting.. I now have (or have had) most of the faults that everyone else is experiencing.. I never used to get them at all with the i-mate 1.40 Rom or the NL 1.42 T-Mobile Rom.. I have listed the bugs below..
1 - One Hard-reset when inserted into GPS Car holder
2 - Several occasions where I've "lost" the Storage Card (when serching for it on the device AND through Active Sync)
3 - Interesting situation where I've started TomTom5 and I've suddenly had to go through the set-up process again only to be told that there's no maps (Can only attribute this to an occasion where the Storage Card is not seen by the PPC - See above).. Solved by remove Programs, soft-reset then re-install off SD Card.. (quite annoying as I was lost at the time!)
4 - Occasional failure for BT Headset being recognised on an in-coming call (I use the Logi-Tech Pro).. Solved by Soft-reset..
5 - Sometimes, after soft-reset, get a low performance from the Device.. ie, after soft-reset and switching to phone where it takes a few seconds to "build" the phone screen..
Strange but as I mentioned above, I don't recall getting these bugs on the 1.42 NL Rom or the i-mate 1.40 Rom.. I might try a hard re-set on Monday then re-install my tomTom, etc to see if it carries on.. If it does, I MIGHT switch back to the either :shock:
That's it really.. I have had the early T-Mobile 1.06, the i-mate 1.40, T-Mobile NL 1.42 and T-Mobile GB 1.42 and finally the WM5 Roms and from what I've seen, I place them in this order of preference..
1 - i-Mate 1.40
2 - T-Mobile NL 1.42
3 - T-Mobile GB 1.42
4 - WM5
5 - T-Mobile GB 1.06

Hi,
Updated to the dutch ROM, is better then this UK ROM.
Version number is also newer.
Regards,
Max

dazed and confused
sorry if I'm being simple but ....
I though this was the last offical rom
http://www.iris-global.com/t_mobile_download/download_manager_mda_com.html
MA_TMUK_11300_128_11200_SHIP.exe
Rather than
http://t-mobile.iris-global.com/files/BA_TMUK_14200_112_11300_Ship.exe
How did you maanage to find the link?
What is the diference between the builds - How can I find a change log?
What is the BA / MA?
:?:

See here:
http://forum.xda-developers.com/viewtopic.php?t=31360

No difference in UK and NL Rom..?
[email protected] said:
Hi,
Updated to the dutch ROM, is better then this UK ROM.
Version number is also newer.
Regards,
Max
Click to expand...
Click to collapse
Hi Max,
The Rom is exactly the same and the only difference is the changes in the extROM that makes it either UK or NL Spec (ie, MMS settings, etc)
Hi Starfish - Perhaps you need to look at this for the answers to your other questions:
http://wiki.xda-developers.com/index.php?pagename=BlueAngel_For_Beginners
Oh, and BA is "Blue Angel" and MA is the "Magician" HTC Names for the devices..

Sorry I did'nt read close enough Magican vs Blue angel

starfish_001 said:
Sorry I did'nt read close enough Magican vs Blue angel
Click to expand...
Click to collapse
That's ok.. We all have to start somewhere.. 8)
Now, I'm not too sure how far advanced you are in Upgrading, etc but before you do, please remember the following that I put on another post on here..
MrPhilly said:
General Tips to you (and others)..
If you do want to update or upgrade then make sure you read everything through first.. Make sure you're happy in doing it.. Perhaps use the search function to read through others comments.. I would also recommend reading others comments about trying to downgrade from WM5 to WM2003SE to see what others have encountered
You will not believe the amount of people who end up posting questions when they've not followed the instructions from Wiki that I've pasted for you here..
Finally, if you are stuck, use the search command and describe your problem in the Keywords section, select Blue Angel from the Category and read through the posts relating to it before posting questions..
Hope this helps..?
Cheers!
Click to expand...
Click to collapse

How can I upgrade to a stable rom
I have tried the TMobile NL and UK version both give the Country ID eror with the extra numbers 17-17-38-38-38
How can I safely upgrade to the 1.42 version (I have read the Getting Started With The Blue Angel) .
Is that the way to go?
"I get the password error on the xda3nbftool for the nbf segment"
I would like to get rid of all the phonesound failure and systemhangs with TomTom5.10
My Qtek9090
PH20B 0 B
WWE E
DANGA001
1.40.00 0 0
1.40.556
1.13.00 13.00

Upgraded to this from the last O2 update (my BA is an O2 Xda IIs), and while for the most part it works fine, now if the device turns the screen off for power-save while out and about, the GPRS connection drops. I know the hardware is capable of keeping the GPRS connection alive in such a situation because, well, it didn't drop it under the previous two O2 ROMs I ran.
Anyone else had this problem, or know a fix? Hopefully it's something simple that I've overlooked...
I'm getting better Bluetooth support with this (whether through actual improvements in the stack or through sheer dumb luck), so I'd prefer not to downgrade if I can avoid it.

Upgrade for NON OEM/Carrier Blue Angel
I have an unlocked OEM i-mate PDA2K. Because of this I am unable to install the T-Mobile upgrade to 1.42.
Is there a way to get around this?
I tried using the MaUpgradeUt_noID.exe, but I was unsuccessful.
Any ideas on how to upgrade a non-T-mobile branded blue angel?
Thanks

problems upgrading a non-t-mobile branded PD2K
BELOW IS THE SCREENSHOT OF THE ERROR

Did you make sure you had the MAUpdate file in the same directory as the actual upgrade had been uncompressed into? Since it's missing the RUU.DLL file that is part of that package.
Basically, get the files out of the real upgrade, then copy the MAUpdate into that directory, then run it instead.

I can not unzip or unpackaged the shipped OS
When I double click on the file, it runs the file, when you right-click and select extract, it gives you an error.
How do you unpackage the ship package?

Me, I used WinZip, I think it was.

Can not unrar or unzip setup files from exe package
the instructions states:
Unrar or unzip all files in exe or rar into a new folder. I get an error when I do that.
I also noticed that the instructions states:
First Method (Quick/Easy) (TYPE II), but there is another method Second Method (Slower/Harder) (TYPE I)
I am going to give that a try

O2 XDA IIs
Hi from Greece,
A friend bring me to Greece from Singapore one O2 XDA IIs but it has a old versions:
rom 1.31.00 wwe
rom date: 12/13/04
radio v:1.02.00
protocol version: 1337.32
ExtROM version: 1.31.920 wwe
sorry but I'm newbie here, can you tell me what (and where can i find) I must download in order to update to the latest versions.
I allready download the latest version from O2.UK for O2-XDA IIS but I do not want to lock my device to any network and that's the reason who asked you and I do not install this I allready download.
I allready see http://wiki.xda-developers.com/index.php?pagename=BA_Upgrades but I don t now what I must download.
thk u

Debranded MDA Compact II ROM, 'Qtek' Style

now obsolete
new aku2 here
http://forum.xda-developers.com/showthread.php?t=279908

so am i right in presuming that the gprs settings and phone settings are present in the rom? if not, how do we find them?
ALSO:
T-Mobile are releasing a rom update this month (ie this coming week!) so it might be worth looking at what they have done, not just for wifi fix but any other maintenence changes. Apparently they do alot of testing on their roms so there might be useful stuff there.

t-mobile gprs and wap settings are part of the extended rom. the 3 cabs files that begin CAB-Customization-...
i didnt include them as i'm on O2. This is more like a 'Qtek' version for the charmer, a universal version. doesnt include any operator specfic content.
looking forward to that update, hopefully its aku2, everyone else is releasing theres at the moment.

SDIO
What about SDIO drivers in this debranded OS?

so if i back up my current rom cabs and then install this, if it all goes pearshaped, i can relaod the origional and not end up with an expensive paperweight?
i wanna do the deed, but am scared as hell with it being my first PPC and only a few weeks old at that.
but anything to speed it up, its like im running windows or something.......
oh!
:wink:

only way you could mess up is if you pull the plug or have a power cut! while uploading the new os. remember to backup all your contacts and stuff as you'll need to hard reset.
you can start all over again if it doesnt boot or something by using the install package on the t-mobile site
http://t-mobile.iris-global.com/download_manager_mda_com2.html
just go into the phones bootloader, with the phone off, hold down camera and plug in the sync cable until the 3 color boot screen comes up and run the install package to go back to factory.

It worked!!
Dear dave106 and all;
i tried your fantastic upgrade yesterday. This was my experience:
1- I works like charm!
2- you might find it easier to use Total commander to uncheck 'system' and 'read-only' in the properties of the windows folder on your charmer, before Unlocking CID (to avoid any error).
3- alternatively you might use Lockiwiz 2b from this forum to unlock and unlock CID first.
4- the ROM upgrade went fine, showed some error messages on the charmer screen (nothing to worry about) but did not indicate an end. I unplugged it after 20 minutes. It rebooted on itself et voila, it was up and running.
5- Changing the boot scrren went very smoothly.
6- I noted that the T-mobile customization (after the new config.txt) did not install at all. I had to manually install the CAB listed in the config.txt file to reload the MMS and GPRS settings.
But now my charmer has no T-mobile crap on it...
However, i did not notice any dramatic change in speed....

Ill check your unbraded rom for wifi sdio capabilities over the next few days (on a 'just in case' basis). I'm just recovering from a totally borked pagefile on my main pc so ive been too busy to try as of yet.

is this howto working on that device ?
http://www.vodafoneshop.de/shop/det...schaeftskunde&I_ID=4000&Artikel_Daten_ID=3208
or can i damage something with your howto over there ?

supreme2k said:
is this howto working on that device ?
http://www.vodafoneshop.de/shop/det...schaeftskunde&I_ID=4000&Artikel_Daten_ID=3208
or can i damage something with your howto over there ?
Click to expand...
Click to collapse
thats a wizard, so you can just cid unlock it and install the imate or qtek wizard roms. the mda compact 2 is unique to t-mobile no other operator has it.

aeh....your sentence sounds strange to me, is it possible for my device or not ?

supreme2k said:
aeh....your sentence sounds strange to me, is it possible for my device or not ?
Click to expand...
Click to collapse
lol, in a word, no.

i am from czech and i dont understand all of this.
This is OK? or only any idea..
is really decustomization my mda compact II? I have tmobile
(i dont can it)

i flashing new rom....
after 10minutes say my mdac "aplication repllog.exe dont start"
...update is OK, and i have second problem
when customization is start it said " \Extended_ROM\CAB-Customization-Connection-TMUK-Charmer-Nov15.sa.CAB"
DOESNT IT, I DONT HAVE THIS FILES IN EXTENDED ROM ++
and third problem, my storage card doesnt work ( i have2gb pretec...
only after the update

dead link
Can someone please post a working to the debranded rom? The current link does not work :-(
Thanks,
Dzim

funkus said:
Ill check your unbraded rom for wifi sdio capabilities over the next few days (on a 'just in case' basis). I'm just recovering from a totally borked pagefile on my main pc so ive been too busy to try as of yet.
Click to expand...
Click to collapse
Funkus,
did you try wifi sdio with this debranded rom?
tnx

Re: dead link
Dzim said:
Can someone please post a working to the debranded rom? The current link does not work :-(
Thanks,
Dzim
Click to expand...
Click to collapse
try it now, some tit nuked the uploads again

Got the Rom Working, the difference is quite noticable. Re wrote the extended ROM to auto customise just enough to get the MMS and GPRS to work correctly. Did any one work out if a WiFi card SD card will now work?
Would like to know before i buy one!

Re: dead link
dave106 said:
try it now, some tit nuked the uploads again
Click to expand...
Click to collapse
Thanks a lot, I have spent few hours searching the Web for this file, but couldn't find it. Thumb up!!
Dzim

aWizard not reconizing os.nba
Hi,
have followed instructions as above but when I go to write new rom it can't find os.nba.
Anyone have any ideas on what i'm doing wrong or what to do next?
I'm a noob, obviously :roll:

dopod 595 - imate spjas - htc mteor - rom files

gd day to all friends
lets everyone mention here whcih rom files we have already so if some one is looking for any of them he knows its out there !
till now i have managed to find
dopod 595 chinese
dopod 595 english wwe
looking for the tohers id any one has them please advise here !
thanks

rom of i-mate is out on the ftp.....
gd day to all
today i-mate as uploaded to their ft the shipping rom for the i-mate spjas
i am taking it now and tonight will try to load on to my dopod 595
here is the link ..
gd luck
ftp://ftp.clubimate.com/

imate spjas rom is out !!!!
just uploaded the rom for you all to download and use if you wish i have upgraded to it now and i can tell its runing fast rom .
for now this is it .
ftp://xda:[email protected]/Uploads/Htc Mteor - Dopod 595 - Imate Sp Jas/i-mate spjas/rom

htc mteor rom coming your way in 1 hour to the ftp here
htc mteor rom coming your way in 1 hour to the ftp here
will post a link !

htc mteor rom
ftp://ftp.xda-developers.com/Uploads/Htc Mteor - Dopod 595 - Imate Sp Jas/htc mteor/

Motin, can you tell us what the ROM is you've just posted? Is it the HTC shipping Rom, and if so,where did you find it (I can find no updates on the HTC site)??? It looks like a Qtek ROM, but there is no Qtek branded Mteor as far as I know.
Please help so we all know what this Rom is!

htc mteor rom
my dear friend this is the shipping rom for the htc mteor and please dont ask where did i get it from cuase i cant say .
thanks

Motin, brilliant, many thanks. It's great to have this as those of us with Mteors now know we can revert if the other ROMs do not pan out. A great find, whereever you got it

@motin: Can you provide ROM version numbers (found in Settings->About)? I think - according to my invoice - that my new MTeoR (got it on 10th of September) has already this ROM. I just want to make sure that it's a newer one, before committing to a download (our aDSL infrastructure sucks big time for two weeks now) that will take forever.
Many thanks in advance.

Frontier, the ROM Motin posted is the current HTC Mteor shipping ROM. I have the same one on my 2mo old Mteor. HTC are saying they will release a neew ROM in the next couple of weeks.

need some voice files from dopod 595 rom
gd day all can any one post or email me ziped file with the 1 voice file saying you have new sms from the dopod 595 i think the lady voice is saying you have new message
my email is [email protected]
if you can thanks

bugger....part 1
Hey,
I have a Dopod 595. I like, love it, its great. In my efforts to improve it, I tried to update it to the imate ROM, because my one still has Chinese in the voice activation section (that dedicated button next to the camera one).
I plugged in the USB, have the latest Activesync, on WinXP Pro with the latest patchs etc. Then using the imate ROM avalable on the FTP here, I started teh update procedure. it detected the phone etc etc, the phone went to a white screen. Then before it started uploading the new ROM, an error comes up about how this phone isn't an imate one, & it exits, leaving my phone at this white screen. I panic (in hindsight, not my finest hour).
I didn't want to reboot the phone because I didnt know if the updater had already deleted the OS, which would be very bad. I re-ran the imate updater, same error, same place. So i run the Dopod updater, in the hopes that it will put a fresh ROM on there & all will be good.
The Dopod one works (horay!), the phone goes into the 3 color screen (which i now know is good) and it take about 20 min to load the ROM. Then the updater says its done, closes...

dopod 595 rom install
gd mrng sir this is very solotion
just run any of the rom files and when you get the 3 color screen on the device wait for the erro on the pc that will tel you it cant be install then dont do nothing just close the window on the pc and re run the install software this time it will let you install any rom .
rgds

bugger....part 2
My phone is now on a pure white screen with the HTC logo in the middle. it sits there forever. I wait for about 1hr, thinking maybe its doing something, then I try to turn it off, but i can't, so i pull the battery out. When I put it back in I gat a black screen with the Dopod logo for 1 sec, then back to the HTC screen (with full backlight on constantly). I plugged in power and left it overnight, but nothing is changing....none of the buttons do anything either.
Any suggestions would be realllyyyy nice about now. I think i might have turned my phone into a night light (due to the unrelenting backlight).

motin, I never get into a 3 color screen again though, is there a way to force it? The pc doesn't seen to detect the phone when i plug in USB.
Thanks for the quick feedback

dopod 595 rom install
1. take the battery out
2. press both camera and power botton at same time
3. wait for the 4 color screen to appeer
4. connect the usb cable and then u see the serial word change to usb
then run the install again and update here
if you want we can chat on msn just email me

OMG, thank you!! I thought i was a gonner for a bit there.
I am about to flash it now, I will update when i know how it goes.
ThankyouThankyouThankyou

zaph42 said:
OMG, thank you!! I thought i was a gonner for a bit there.
I am about to flash it now, I will update when i know how it goes.
ThankyouThankyouThankyou
Click to expand...
Click to collapse
ok i am waiting your good news please post them online !!!

Everything is working now. I have the imate ROM install & working. many thanks for your assistence

HTC MTeoR: latest available ROM
Hi all,
I am looking for the latest available ROM for HTC MTeoR. FTP access mentionned in previous posts is not valid anymore.
Any suggestions?
Thx.

Charmer crashed with the new Aku 3.3!

Hello!
I tried to flash my Charmer with the new german Aku 3.3. At first everything seems to be ok, but at 95% it stops and i got the Message: update error- there is an comunication problem! So what can i do? I tried to flash the old rom back but there comes also at 95% a message: invalid command - nfb file cannot be used for your pda!
Please help me !
Greetings Musna!
Ps: can somebody upload a sd image for the mda compact II !

Go to bootloader mode, then try to flash RUU rom (1.x). You can find it on Charmer wiki.

It doesn`t work too, it always stops at 95% has anyone another idea?

did you try hard reset?

Yes i tried hard reset, but it is always in bootloader!

I have also the same problem. Tried to upgrade to version 3.3. Everytime it stops at 80%. I don't know why?! I can repair it with the software and re-run it. But it has the same effect.
Now i will try to downgrade to 2.6 again. I really don't understand what causes the problem. I hope i will get this thing running again....
EDIT: I reflashed the device with the older 2.6 ROM and it is working right now. However I didn't really get why it gets stuck at 80% with 3.3 ?!?!

nitrane said:
I have also the same problem. Tried to upgrade to version 3.3. Everytime it stops at 80%. I don't know why?! I can repair it with the software and re-run it. But it has the same effect.
Now i will try to downgrade to 2.6 again. I really don't understand what causes the problem. I hope i will get this thing running again....
EDIT: I reflashed the device with the older 2.6 ROM and it is working right now. However I didn't really get why it gets stuck at 80% with 3.3 ?!?!
Click to expand...
Click to collapse
The aku3.3 is up to date the bootloader version!!!
IPL and ISP version now is 3.00.
http://www.windowsceportal.hu/forum/viewtopic.php?t=1079

Sorry but i do not speak hungarian. What do you want to tell me ?

I´ve got the same: My charmer is in Bootloader IPL 2.06.0001 SPL 3.08.0001
I can´t downgrade to AKU 2: Please order a newer Version.
Every try to upgrade to AKU 3.3 failed at 95% with Error 326.
Is there any help for my charmer???

oh.**** !!!! I got the same problem with them and my first pda uk rom already empty screen and then i try with my scrond pda German rom it the same problem and now just only show in bootloader screen.Have i ask someone who knowage about this he told me that if SLP in you PDA have chang it be hard to repair.So,I think I lose 2 PDA did I try to flash in T-Mobile Official Rom de that i hope to develop it but i hve to kill 2 Charmer.Who take responsibilities,T-Mobile right ???

Ok no problem you can repair it! At first you have to brand your device with the rom you want to! After 95% the Problem will come again! When it stops you have to go with a reset to bootloader again.When your device is in bootloader you have to install the Radio Rom from this thread:
http://forum.xda-developers.com/showthread.php?t=302768
After that your device will be able to boot again and it should work!- But the Problem during the installation will stay,so you have always to use this way to flash your Mda compact II!
In the new rom there must be a problem with the radio rom and this causes the broken device.
I`m sorry for my bad english but i`m not used to talk very much! So i hope you understand what i mean!
Greetings from Austria Musna!

that link is broken

Then try this one:
ftp://xda:[email protected]/Prophet/Radio_Roms/Prophet_G4_RadioRom_v2.47.11.exe
You can find the radio rom also on the ftp server. Prophet> Radio Roms>Prophet_G4_RadioRom_v2.47.11.exe
You can try different Radio Rom versions, i have flashed the v.247.11 and it worked.
Normaly it should work!

Thank u so much !!! My Charmer secrond PDA come back have life again and it can working.So,my Charmer first PDA UK rom still empty screen and notthing working when i press any button.Who can slove this problem !!

Musna do you have any massage such as msn

Which WM6 has phone support ?

Hi,
I have the SPV M1000 (Himalaya), and phone used to work, then died. Texting worked, but phone didn't. So i used the Orange supported software, but it downgraded it to Win Mobile 2003. Although the phone did work, i prefer WM6 for the rotate screen feature etc.
Anyway, i downloaded a few WM6 roms, but of the 3 i tried, none of them allowed me to use the phone bit of the M1000.
Which WM6 rom should i download to get the phone working okay with my Himalaya ?
I tried C_ShekharAKU7.0c.R40.P24_public, also himalaya_6_1_0_0 file, but i cannot get the phone to work.
Regards,
Andy

I would suggest that either something is wrong with the phone section, or someone has made a mistake when upgrading the radio section of the phone.
The radio upgrade is a seperate upgrade to the ROM. All Windows Mobile roms should have phone support automatically, it is just a matter of getting the right radio working for you.
I am at work and as such I can not provide you any more detail, needlesss to say, use the search function in the top right hand corner of this website, and search in the Himalaya section for radio upgrade.
Cheers

Cheers Jadel, will give that a go now !
Best Regards,
Andy

Hello,
I'm now getting a strange error ! - i downloaded "C_ShekharWM6.1.1cR16.P32_public", but when i try to install i get a "country code" error ! - "ERROR 120: COUNTRY ID ERROR N-4-1-N-N".
What does this mean ?
Regards,
Andy

Use HimalayaUpgrade_NoID instead...........!

If you go to the Himalaya Upgrading section, you would have noticed this is the third link from the top "Fix and prevent ROM Upgrading/Downgrading Country ID Errors"
Here is the link, read it all and don't skip ahead, Rom upgrades can brick a device if not done properly.
http://forum.xda-developers.com/showthread.php?t=228852

Many thanks, i'll try that !
Regards,
Andy

Just tried the "himalaya 6_1_0_0" upgrade. Installed okay. But when on main desktop screen i'm getting errors, couldn't open these files : "Screenrotate.exe", "btdwake.exe" and "Phoneservice.exe".
Other than that it works !
Help please.
Regards,
Andrew