Hi all,
i have the Kaiser for a week, and was thinking the batterry autonomy isn't especially amazing..
Then doing some research, i've found out that that despite the backlight setting set to be turned off after 30 sec, it was NOT turned off.
Switching setting to 1 min doesn't help either.
Setting it to 10 sec DOES work, the backlight turns off after 10 secs, BUT turns back ON after various seconds (sometimes +/- 11 secs, sometimes after 21 seconds...), then 10 secs later again off, etc etc... (cycle forever).
I did removed from the today screen both SPB Mobile shell and HTC Home (today screen = blank). But the problem is still there...
so the questions :
1) Does anybody experience that (it took me a full week of use to note this... can you try it on your Kaiser ?)
2) Any idea/solution to fix this ?
Best Regards,
Mike.
Just letting you know, that mine works as it should.
I dont have that bug .... but another bug:
After soft-reset, the battery backlight will be set to 10 seconds.
No clue yet why that happen.
When having issues like that try a hard reset and do not use a back up just set everything back up by hand. I found that most apps still are not ready for WM6 just yet since it really is a new OS even though we have had it for what seems like a very long time now.
Hi
Then doing some research, i've found out that that despite the backlight setting set to be turned off after 30 sec, it was NOT turned off.
Switching setting to 1 min doesn't help either.
Click to expand...
Click to collapse
When you set the back light to turn off, it doesn't actually turn off, instead it drops to minimum brightness. If you are in darkish room and so have the backlight set to minimum anyway, it looks like it isn't going off.
This is by design for Windows Mobile 6 devices, the Toshiba G900 was exactly the same. I can only guess it is because the screens are not trans-reflective, so they dim to the lowest level so you can still make out what is on the display and can tell it is still on, rather than in standby. This makes the behaviour seem similar to those moving from trans-reflective displays as while the backlight could go out completely, you could still make out what was on the display.
Regards
Phil
Hi,
it's hard to believe no one asked this before but I could not found anything about this..
My Diamond (as probably every wm phone) wakes up at midnight.. but because I'm loading the battery over night it does not switch off the display completely but stays dimmed until i switch it off manally.. because it lays right next to my bed I really hate it doing that.
So is there a possibility to switch the display completly off during loading? I have the windows configuration the way that it should switch off the display after 1min in ac-mode.
Thanks in advance,
Michael
"My Diamond (as probably every wm phone) wakes up at midnight.. but because I'm loading the battery over night it does not switch off the display completely but stays dimmed until i switch it off manally.. because it lays right next to my bed I really hate it doing that.
So is there a possibility to switch the display completly off during loading? I have the windows configuration the way that it should switch off the display after 1min in ac-mode."
I'm having the exact same issue with my HTC FUZE.Wakes up, then stays in a dimmed mode until I put it back to sleep. Anyone have any ideas?
Thanks
TJ
jus go to settings/power and change the setting of the backlight to turn backlight off after 5min on external power!!!
azharsunny said:
jus go to settings/power and change the setting of the backlight to turn backlight off after 5min on external power!!!
Click to expand...
Click to collapse
The phone settings are set for backlight off after 1 minute (on external power). Once the phone wakes up, it stays on (in a dim mode) until I physically press the power button to put it back in the standby mode.
Why does it wake up at midnight?
Is it because you have installed a program that restarts it automatically?
i've noticed my diamond wakes up at midnight, feels like it doesn't go off, but does after a few minutes, all the buttons light up as well as if i a txt is about to come on, but the screen come on, i've only noticed it as i've been up late recently and i have the diamond on front of me on hy desk, my old orbit phone (which i keep meaning to sell) doesn't do it, so i can't see it being a wm bug
Weird.. My Diamond doesnt wake up at midnight
stead said:
i've noticed my diamond wakes up at midnight, feels like it doesn't go off, but does after a few minutes, all the buttons light up as well as if i a txt is about to come on, but the screen come on, i've only noticed it as i've been up late recently and i have the diamond on front of me on hy desk, my old orbit phone (which i keep meaning to sell) doesn't do it, so i can't see it being a wm bug
Click to expand...
Click to collapse
Do you (or in the past) have G-Alarm installed. This fixes a windows alarm clock bug. It switches on at midnight to do some sort of maintenance. I have found my phone no longer stays on as you describe, but I always run the latest version of g-alarm
BTW - get your orbit on ebay. I did a buy it now auction and got £150 for my Orbit a few months ago
No More Issues
I have since flashed my ROM to the NATF 4.5 and I have no more issues with the phone coming on at midnight.
Mine used to do that too, the screen would come on and the clock also switches back to the big clock which I hate. After installing galarm it went away but the clock still switches to the big clock and I have to switch it back every morning.
My Topaz also wakes up at midnight and it feels like it won´t shut off! How long should this session last to reorganize all the things? G-Alarm is installed and since then I had this issue.
I could deactivate the midnight wakeup, but I don´t think this is recommend!? Is it?
Strange problem that might be a common issue. I have just gone through the process of installing Android on my TyTN II and the android system itself is working fine. Although for some reason, when the screen goes off (after screen timeout) when I push the power button to wake up (and then unlock) the device the screen just comes on as a big white screen (no image, almost as if im using the screen as a flashlight or something).
I have tried 2 different android ROMs now and it happens with both of them. Anyone got any ideas?
Zeb
This has now been fixed by changing the panel type of the display from Auto to "1" in the kernel and re-flashing.
Hi!
I've trying to figure out why apps like Active Notifications and Floating Touched doesn't work the way it should.
I'm running stock and I'm rooted.
Floating Tougher has an option to lock screen when button is pressed on screen. However when this button is pressed the screen goes dark and flickers and then turns on again. At first I thought there was a problem with the app do I didn't think much about it.
NotifyX and Active Notifications etc. doesn't work either. When I lock my screen there's a brief moment, 6-7 seconds, under this moment the screen stays lock but then turns on to show the notification screen by the app.
I've uninstalled most of my downloaded apps but the problem still persists. I've checked wakelocks but couldn't find anything worth checking out.
Anybody else with the same problem or maybe even a solution?
Thanks!
Sent from my GT-I9305N!
i bought a htc m7 few days back . i did not not use it on kitkat i just updated it to lollipop then i started to notice as soon as i hit power button it would not unlock immediately only the back and home button would lit on and it takes a while to display to light on, sometime it just would not lit.and when someone called me there was nothing on the screen.. i became frustrated i searched but found nothing.. only few threads on xda.. but atlast i found the solution
Solution : Just put a colorful bright wallpaper in your lockscreen and homescreen avoid black wallpaper (optional : crank up your brightness or disable auto brightness) this simple solution put an end to my frustration.. press thanks if i helped