Xda IIs ROM updating disconnected - MDA III, XDA III, PDA2k, 9090 Software Upgrading

Hello everybody,
I have a xda iis. So, I tried to update the ROM. When the process is started, I disconnect the usb connection (this is an accident ). And when I reconnect my PDA, and I run the update application, i have a problem :"connection error". In the pda screen, it give me : " USB v2.07"
Plz, somebody can help me to resolve this problem !!

..
I experienced this same problem so many times... that's why, I always keep a backup of my rom in a storage card. just repeat the process and try again.. you'll be safe when your device can still be turned in bootloader mode.

thanks for your answer.
I run the process one more time after many restart my pda. And it works !
thank you borjok536, you're the best

Related

SD-Card Rom for Charmer

Hi guys,
I have a big problem with my charmer.
At the begining I tried to work with my charmer and it was OK, but after a short time it resets from alone. It was the same situation everytime, when the charmer was starting and I did the calibration of the touch screen it was reseting always as soon as I pressed the cross on the right bottom.
Next step was to flash the ROM - it was sucessful, but the same situation
-> Reseting at the calibration.
I did once again a flash but it resetet during flashing and now I have the situation, that I can enter boot loader but as soon as I connect it resets.
Battery I checked -> It is OK.
So does anybody have a Rom on SD card ? -> I have no other joice, this is my last chance to get it running again.
Thanks for your help in advance
Best regards
Helldriver
Hi
1. Kill (task manager) wescomm.exe (this is related with activesync installed on your PC).
2. Get your phone in bootloader mode. Like this : Phone powered off, press Camera button + Power On, will enter in bootloader mode (RGB screen).
3. Now connect your USB cable to your phone
4. Download T-Mobile compactii_aku2.0_05-2006 rom and Flash it works for me
jerry
Not working with USB
Thanks for your comment, but it is not working, due to the fact that the MDA tripps as soon as I connect the USB cable (even if I kill the wecomm.exe).
Therefore my only chace is the SD-card
So if anybody has a ROM on SD card, please help me getting my Charmer running again.
Regards
Helldriver
Hi Gents
is there somebody who can help me ?
I really need a SD-card rom
Thanks
Helldriver
Sorry ,but I am noob. How can i flash it??? And how can i kill wescomm.exe???
Rom backup
Hi all,
Still searching for the SD ROm image... Can someone upload?
Please...

[Q] Brickt my phone NO 3-Btn restore

I installed a new rom, and after that my phone does not work .. the start as usual, but never to unlock screen. If you start Samsung Kies you see after a long time that the phone is connected. but you can't do anything else.
if you start odin3 v1.3 we see that there is something, it stands in ID: COM (0: [COM5]) but when you try to do something, nothing happens or it says that it does not work ..
I installed 2.2 in Kies it did do so that I can not use 3-BTN trick.
Is there anyone who solved this? some tricks PLEASE HELP ME!
why did you flash without 3btn working? do you have a bootloop just again and again the samsung logo?
have u tried every 3btn trick (battery out press btns battery in hold btns) if nothing of that is working a jig cable will help i think
Sent from my GT-I9000 using XDA App

[Q] Problem with USB connection

I bought my Galaxy S i9000 , three days ago, and I have problem with USB connection, when i plug in My phone, choose connection pop's out, i press KIES, and phone is connected, for about 3 seconds, and choose connection pop's out again, and it goes over and over. When i turn on USB debuging, then i can connect phone normally . What seems to be a problem ?
ROM on phone is (stock) -> 2.2.1 , I9000XXJPY , FROYO.BOJS5
It is T-mobile (Croatia) phone, and nothing has been changed. On my PC i have Win 7 64 bit. Please help me.
Thank you in advance
Reinstall USB drivers..
Sent from my GT-I9000 using XDA Premium App
I tried, and it is the same i Tried with reinstalling KIES, formating SD cards on phone, even with returning phone to the Factory settings, and it just won9t
I tried, and it is the same i Tried with reinstalling KIES, formating SD cards on phone, even with returning phone to the Factory settings, and it just won9t
It is the problem, like in THIS thread, i just found it, but all solutions from this thread, just won't help

[Q] Panic stricken

Hi Peeps,
I an absolute panic here only had my samsung galaxy s 19000 4 weeks and tried to root it using odin,, well odin
started
then when it got to setup connection it just sat there , so I did something I think was stupid , unplugged the cable
I rebooted the phone to a screen that had a pic of the phone and a pc imnage , so I restrted the phone in download mode, re-started odin and tried to re-install the original firmware but it stops at setup conection again ,,
help is much appreciated here as I am now at the stage of having a breakdown and very scared ,, please answer in very simple explanitary terms as I am nooooob
just used a different usb port and things have gone a bit thurther so I will wait and see the result
sorted this out now ,,
Good Work
use EZodin 2 flash bak to stock Froyo, saved me loads of bricks, remember to hit the thanks button if it helped

[Q] Odin stuck at Setup Connection Phone not working

Hi there I recently just got my self a i9000 and it had gingerbread v2.3.5 and I wanted to flash XXJW4 on it simply as it was the latest update so I downloaded odin v 3.0.7 and I had put my phone in to download mode and put the firmware file in the PDA section .The weird thing was that Odin didn't recognise the phone after plugging and unplugging the cable to the phone for a few times until it recognised it.Finally it recognised it and then I proceded to flash with auto reboot and f reset time only checked.Then it looked like everything was alright until it reached to Setup connection and after about 5 seconds it didn't do anything. I stupidly then took out the cable from the phone and I then rebooted the phone and I now get phone triangle then laptop. If I left the phone at setup connection would it have done the flash successfully? the good news is that I can get into download mode so all is not lost.Could some one please guide me out of this mess?
Thanks
mizzeeboy said:
. If I left the phone at setup connection would it have done the flash successfully? the good news is that I can get into download mode so all is not lost.Could some one please guide me out of this mess?
Thanks
Click to expand...
Click to collapse
Look in My Android Solutions for setup connection problems and here for flashing guide
Check this out! You , YES! you are an " Android ". Not your phone but U.​

Categories

Resources