Database Develop

Case for Unit without Keyboard

Anyone know of a case that doesn't hold the keyboard? And, hence no magnets? Just want to carry the main device by itself in the smallest possible volume.
Thanks,
Krip

i search for something similar (didn't wanna start a new thread).
i'm looking for a case that can hold the device itself and the keyboard in two different pockets within the same case (can be a totalyl closed case, where you have to pull out the athena like the universal pda case from pielframa, but with two pockets). plus it has to have a very solid belt clip and should be as small as possible.

Skins or case just for the screen
Well im looking for a Skin similar to whats available for Ipods and various other phones out there.
Just want it for the Screen and not the keyboard. So at least the screens protected whilst in my pocket.
Any help would be appreciated as this is the only niggle i have at the moment!
Cheers

Silicon Cases for Athena
tomchap said:
Well im looking for a Skin similar to whats available for Ipods and various other phones out there.
Just want it for the Screen and not the keyboard. So at least the screens protected whilst in my pocket.
Any help would be appreciated as this is the only niggle i have at the moment!
Cheers
Click to expand...
Click to collapse
If I understand you right tomchap, I'm looking for the same thing...a silicon skin for the main unit (preferably with a hard clear plastic cover for the screen). That would make the Athena slim enough to fit in most of my pockets and stop and serious scratches or damage to the device.
Have been looking too....something like this but in better quality in various colours.
http://img.alibaba.com/photo/11762671/Silicone_Skin_Case_For_Sidekick_3.jpg

Thats the one, Skins type case
Yep thats def what im looking for, like these
http://img.alibaba.com/photo/11609075/Gen_Skin_Case_For_Apple_Ipod_NANO.jpg
A clear see through plastic cover / skin would be ideal.
Ive looked everywhere, even the usually most reliable eBay and theres hardly anything available for the Ameo.
Loads of screen protectors but thats about it.
You would think someone out there would make one?

Rucksack case for Athena without keyboard
Am also looking for a case, but a reasonably weatherproof one that I can attach to my rucksack shoulder strap to hold the Athena when I am outdoors using it for digital mapping. I have the perfect one for my Hermes but am going to test the Athena to try the larger screen.

anilk said:
Anyone know of a case that doesn't hold the keyboard? And, hence no magnets? Just want to carry the main device by itself in the smallest possible volume.
Thanks,
Krip
Click to expand...
Click to collapse
Stumbled across this...
http://www.pielframa.net/prodi.asp?id=722
The DIMENSIONS (Height x Width x Thickness): 178x115x20 mm are right for Ameo that is 133.5x98x16 mm
Gboye

Kurvenal said:
Am also looking for a case, but a reasonably weatherproof one that I can attach to my rucksack shoulder strap to hold the Athena when I am outdoors using it for digital mapping. I have the perfect one for my Hermes but am going to test the Athena to try the larger screen.
Click to expand...
Click to collapse
U1000 size, 9.5 x 2.2 x 13.4 cm
D-Pods 50, size (Interior): 8.5 x 5.5 x 14 cm, stretch fabric, snug fit, hard to take out as the width is a bit tight (stretched), I like this coz the material (got protection), http://www.lowepro.com/Products/Camera_Pouches/designed_digital/D-Pods_50.aspx
SlipLock™ Pouch 20, size (Interior): 9 x 4.5 x 14 cm, this fit nicely, easy to take out, but less protection, http://www.lowepro.com/Products/Accessories/sliplock_cases/SlipLockTM_Pouch_20.aspx

johnnykok said:
U1000 size, 9.5 x 2.2 x 13.4 cm
D-Pods 50, size (Interior): 8.5 x 5.5 x 14 cm, stretch fabric, snug fit, hard to take out as the width is a bit tight (stretched), I like this coz the material (got protection), http://www.lowepro.com/Products/Camera_Pouches/designed_digital/D-Pods_50.aspx
SlipLock™ Pouch 20, size (Interior): 9 x 4.5 x 14 cm, this fit nicely, easy to take out, but less protection, http://www.lowepro.com/Products/Accessories/sliplock_cases/SlipLockTM_Pouch_20.aspx
Click to expand...
Click to collapse
Both excellent suggestions, thanks very much. I ended up with the Pouch 20 because I like the fit better and it is thinner, therefore easier to carry on my rucksack. Took it out for a test ride yesterday. Both case and Athena digital mapping worked great.

Kurvenal said:
Both excellent suggestions, thanks very much. I ended up with the Pouch 20 because I like the fit better and it is thinner, therefore easier to carry on my rucksack. Took it out for a test ride yesterday. Both case and Athena digital mapping worked great.
Click to expand...
Click to collapse
Can you post some pictures ?

case 20 link
If its the case I've got then the 'pouch 20' is an all in one case designed for digital cameras and similar size units. I bought mine online from jessops here in the United Kingdom.
If I am wrong and this is NOT the case 20 talked about then forgive & sorry.
jessops case 20 page can be found here
My pda is NOT a u1000 but similar. Just stumbled on this thread. This pouch 20 is smaller than u1000 so Ive just been told so sorry for the error.Must be a different one.

nicholasendean said:
If its the case I've got then the 'pouch 20' is an all in one case designed for digital cameras and similar size units. I bought mine online from jessops here in the United Kingdom.
If I am wrong and this is NOT the case 20 talked about then forgive & sorry.
jessops case 20 page can be found here
Click to expand...
Click to collapse
How did you managed to put the U1000 inside ?
U1000 size, 9.5 x 2.2 x 13.4 cm
Rezo 20 size, 7.5 x 3 x 10.5 cm
BTW, i saw something similar, but since it is 'zipper', it is quite hard to take out/in without scratching the unit.

Found -HERE - a silicone skin case for the HTC Athena (Dopod U1000, HTC X7500, etc) comming soon.....

XzaniX said:
Found -HERE - a silicone skin case for the HTC Athena (Dopod U1000, HTC X7500, etc) comming soon.....
Click to expand...
Click to collapse
Nice! Thanks for the post. I can't wait to see if it will be designed to allow you to continue to connect the keyboard to it. An option of sorts. The only negative I can think of is that it'll stick to your pocket when you try to put it in there and take it out. Same thing happens to my iAudio MP3 player with its silicone case. Maybe they'll have a belt clip for it!!!

Pouch Bag
Some of these look interesting
http://www.warehouseexpress.com/?/photo/Kata/kata_photo/cam_pouch.html

Anyone tried a Lowepro D-Res case for size?
If so, which one fits best?

nicholasendean said:
If its the case I've got then the 'pouch 20' is an all in one case designed for digital cameras and similar size units. I bought mine online from jessops here in the United Kingdom.
If I am wrong and this is NOT the case 20 talked about then forgive & sorry.
jessops case 20 page can be found here
My pda is NOT a u1000 but similar. Just stumbled on this thread. This pouch 20 is smaller than u1000 so Ive just been told so sorry for the error.Must be a different one.
Click to expand...
Click to collapse
Here is the one I meant, same as the one in the link above from Johnnykok:
http://www.jessops.com/Products/ProductDetail.aspx?SkuId=22844

I have now found the Lowepro MX 20 case to be the best solution for hooking to a rucksack while riding (see http://www.parkcameras.com/ProductD...roogle/productID/827/groupID/5/categoryID/20) and available in many shops on Tottenham Court Rd. I have added some waterproofing but not yet tested it in very wet weather since the weather has been pretty good these past weeks. I used the Pouch 20 in serious wet weather without waterproofing and found that it did not stay dry inside. I have decided that in very wet weather I will transfer the Athena to a small WXtex waterproof bag I found in an outdoor store.

So did anyone locate some sort of casing just for the device.Out of curiousity

Case For Just Your Unit
Although i am and have made a change for a new mobile(I still have 1 more X7501 that im keeping)I stumbled across this that i thought i would share with the community:
http://www.boxwave.com/products/dlcase/htc-x7500-designio-leather-case_2722.htm
Carry just your unit and not the keyboard whilst you are out doing business!
Hope this helps those whom are looking for a case to take with them when they are doing business.
Regards

Piel Frama case is available NOW!

http://www.pielframa.com/cases_t-mobile_ameo.htm
http://www.pielframa.net/promo_ameo.asp
Just got an e-mail from Ruben at Piel Frama with all the info on the case. It's available and ready for purchase on their site now.
EDIT: Just e-mailed him asking if there is a belt clip option with this case. Awaiting his response.

ltxda said:
Just got an e-mail from Ruben at Piel Frama with all the info on the case. It's available and ready for purchase on their site now.
EDIT: Just e-mailed him asking if there is a belt clip option with this case. Awaiting his response.
Click to expand...
Click to collapse
I need one with belt clip. Their site does not show the belt clip option I have the PDair one without clip at the moment.

victoradjei said:
I need one with belt clip. I have the PDair one without clip at the moment. Need feedback asap
Click to expand...
Click to collapse
Waiting on good ole Ruben to respond.

Good News !!!

75€!!!...bad news indeed!

A belt clip isn't going to be available for the case. i emailed them last Wednesday with the same question and got a reply Thursday, and they stated a belt clip wont be available because the unit is to heavy, and they dont want to risk damage to the unit.

I think £51 for a decent leather case is not bad considering they are hand made, looking forwards to mine arriving as the T-Mobile supplied case with my Ameo has done more damage than any abuse I could throw at the device, the plastic body has taken a hammering from the retaining lugs of the case - should look good in Green
As for a belt clip, it could prove embarassing - lets face it with the weight of the unit you could end up with trousers around the ankles in a very short time - Mike

I'm just going to put a chain around it and hang it on my neck. LOL, yea right.
How do you guys work around the plastic cover for the screen on the case? In my experience, when I purchased other cases with screen covers, the device wasn't very usable as I use the screen tap all the time. I had to cut the plastic out. I may have to do it with this one as well.

What plastic cover for the screen? I see no cover.
I see a small bit of plastic covering the LEDs, and there's a cutout or window for the status display. The screen area looks uncovered to me.
Mine may be here sooner than I thought, then! Red for me, as it'll look excellent in photographs.

RichardKAthena said:
What plastic cover for the screen? I see no cover.
I see a small bit of plastic covering the LEDs, and there's a cutout or window for the status display. The screen area looks uncovered to me.
Mine may be here sooner than I thought, then! Red for me, as it'll look excellent in photographs.
Click to expand...
Click to collapse
Yes on the screen. I hope they didn't put one on there. Just makes no sense to me to put a cover on a touch screen device.
When yours arrives, would you mind posting some info on the case? Your likes/dislikes? I'm going to order one but will wait till next week possibly.

Of course I will post info, but I was told 15 days, as with the original post. If I have it sooner, then expect pictures and a mini review, because that's what I do

RichardKAthena said:
Of course I will post info, but I was told 15 days, as with the original post. If I have it sooner, then expect pictures and a mini review, because that's what I do
Click to expand...
Click to collapse
Sweet and thanks.
I wondering if they took our suggestions and implemented them into the design or if they came up with the case all on their own. I e-mailed Ruben a while back giving him a link to a post we started with things we would like to see of a case for this great device. One being the status window for when the phone is closed, etc.
I can't wait to read your mini-review.

just ordered mine. I ll let you know my thoughts and post pics as soon as it arrives

i think the window in the case (which you can see the date and time), will not work , because the keyboard needs to be closed on the screen self, and now the case is between the keyboard and the screen
Maybe i could be wrong but a short test show me that this wil not work.
Please let me know if i'm wrong on this.
cheers

tvrman said:
i think the window in the case (which you can see the date and time), will not work , because the keyboard needs to be closed on the screen self, and now the case is between the keyboard and the screen
Maybe i could be wrong but a short test show me that this wil not work.
Please let me know if i'm wrong on this.
cheers
Click to expand...
Click to collapse
Just to clear up your confusion....
Turn your keyboard round so the CLEAR (Transparent, see-through, whatever you want to call it) plastic is over where the cut-out on the case would be. Et voila! You can now see the screen.

apphoen said:
Just to clear up your confusion....
Turn your keyboard round so the CLEAR (Transparent, see-through, whatever you want to call it) plastic is over where the cut-out on the case would be. Et voila! You can now see the screen.
Click to expand...
Click to collapse
Yes but i mean, the funtion of this wil only work when the keyboard is flat tot the screen (then the screen wil turn over to the date and time function).
try it yourself without the case , and try to remove the keyboard slowely
then the screen turn out of the date and time mode.
sorry for my english i'm from the dutch.
i'll hope you see the point now, the case self suites oke with the window on it
.

tvrman said:
Yes but i mean, the funtion of this wil only work when the keyboard is flat tot the screen (then the screen wil turn over to the date and time function).
try it yourself without the case , and try to remove the keyboard slowely
then the screen turn out of the date and time mode.
sorry for my english i'm from the dutch.
i'll hope you see the point now, the case self suites oke with the window on it
.
Click to expand...
Click to collapse
Aha, I see what you mean. Yes, the cutout on this case is only useful for people like me who use the keyboard and carry it around with them.

mikealder said:
As for a belt clip, it could prove embarassing - lets face it with the weight of the unit you could end up with trousers around the ankles in a very short time - Mike
Click to expand...
Click to collapse
How would having the unit on your belt instead of in your pocket change the fact that your pants don't fit and will end up around your ankles. The same amount of weight will be pulling your pants down either way. I sometimes carry much more weight on my belt than the x7500 and my pants don't fall down you just need to wear a belt.

Sniper2075 said:
How would having the unit on your belt instead of in your pocket change the fact that your pants don't fit and will end up around your ankles. The same amount of weight will be pulling your pants down either way. I sometimes carry much more weight on my belt than the x7500 and my pants don't fall down you just need to wear a belt.
Click to expand...
Click to collapse
Either option is a non-starter for 'average' sized blokes. There's no way I could get the Athena in any of my trouser pockets.... and it would just look bloody silly attached to my belt.

apphoen said:
Aha, I see what you mean. Yes, the cutout on this case is only useful for people like me who use the keyboard and carry it around with them.
Click to expand...
Click to collapse
Um, that's not what he means at all.
What he's saying is that the Athena needs to "detect" the keyboard is flat across the screen, rather than not properly aligned or not quite attached - so the leather panel on the case will mean the keyboard is likely to not be detected and therefore, the software will not change over to display the status bar.
It depends on the thickness of the leather, but a quick test with my PDair case certainly shows this to be true. Despite the keyboard "snapping" into place across the screen magentically, the Ameo doesn't sense that it is properly closed, and therefore doesn't switch the display over to the status bar.

New Horizontal Leather Case for the HTC Advantage X7510, X7501, & X7500 by NUTSHELL

New Horizontal Leather Case for the HTC Advantage X7510, X7501, & X7500 by NUTSHELL
New Horizontal Leather Case for the HTC Advantage X7510, X7501, & X7500 by NUTSHELL
Nutshell: http://tuff-as-nuts.com/index.asp?PageAction=COMPANY
I had contacted Nutshell regarding a customized Horizontal Case (black) that will fully enclosed the HTC Advantage X7510 with the leather pouch included about 2 months ago. I was able to get intouch with Ian Miller and was basically received with open arms. I was asked to submit my design and the dimensions.
The dimensions are: 5.8 inches (lenght) x 4.4 inches (height) x 1.30 inches (depth).
It is closed by a velcro flap that fully covers the top of the case preventing any accidental exposure to the elements.
The back of the case has the D ring and metal belt clip lined with leather. But in all honesty, I think it would have looked better if the metal clip was left without the leather strip cover. It would looked nicer if the silver finish of the metal clip was shown rather than hidden.
But all in all, the case is very well made. The stitches and cuttings were done right and very clean. The case will protect the X7510 and it's leather pouch while having the ability to clip it to your belt or trousers on the go.
I paid $95.00 for the case, but it may become cheaper if it will be popular.
I have attached pictures for you guys and gals to check. I believe NUTSHELL will mass produce them if the demand is high enough.
THANK YOU NUTSHELL (Ian) for a case well done.
Feel free to ask questions...

Added Pictures...
Added pictures...

nice find as i just bought myself another case but this one i like a lot better although the case i bought was only $49

Thanks Christian. Glad to help.
As this was a prototype, we have not yet given it a part number...but we shall and then post it to our catalog.
With your blessing I"ll use some of the images you have posted here.
Obviously we shall try to price it right, but as the first few will, like this one, be hand cut, pricing will have to stay the same in the short term.
However, if there is an interest (and it has to be considerable to make it worthwhile, we'll likely look at getting the assets that will enable us to run off some volume).
That said, it really is over to the community to determine if this product gets wings...or....?
A suggestion: Maybe someone could open a book to register interest (bulk purchases work best and enable us to finetune our pricing). As I am not a regular on this forum, maybe that someone could run point for me on this.
So it really is over to you guys.
We'll do what we can.
All the best.

nutshell said:
With your blessing I"ll use some of the images you have posted here.
Click to expand...
Click to collapse
Yes of course. Feel free to use it.

cktlcmd said:
Yes of course. Feel free to use it.
Click to expand...
Click to collapse
Nutshell,
Very well taken pictures indeed. Looks like real good quality pouch. Is it made to custom sizes? I normally carry my device without the keyboard, so it is quite a bit thinner and smaller. What would be the total cost shipped to Australia?
Also, a question for cktlcmd. Currently, I have a soft pouch, and taking it out is easy, as I can squeeze the soft pouch to push out the device. With a hard leather one, I imagine it is not easy to squeeze the bottom to force the device upward, so one would have to lift it up. Would that be easy? Or would the device be too slippery for that, even that I carry it naked?

eaglesteve said:
Also, a question for cktlcmd. Currently, I have a soft pouch, and taking it out is easy, as I can squeeze the soft pouch to push out the device. With a hard leather one, I imagine it is not easy to squeeze the bottom to force the device upward, so one would have to lift it up. Would that be easy? Or would the device be too slippery for that, even that I carry it naked?
Click to expand...
Click to collapse
In my case, since it also houses the X7510 with keyboard and the leather case, it is not slippery at all. It is easy to grab it on top and just pull it out. The case itself is not made of really hard leather plus it is lined inside with felt like skin to protect the device from being scratched by the case itself. The technique I use to get it out fast is to pull on top and press each sides of the case because that is where I notice the greatest hold on the device occurs.
In your case, since you will probably want Nutshell to adjust the measurements to accommodate just the device, it won't even be a problem because of the soft felt lining, it will just slid easily in and out.
It trully is a nice case. I wish they had designed it like this from the start.

nutshell said:
Thanks Christian. Glad to help.
As this was a prototype, we have not yet given it a part number...but we shall and then post it to our catalog.
With your blessing I"ll use some of the images you have posted here.
Obviously we shall try to price it right, but as the first few will, like this one, be hand cut, pricing will have to stay the same in the short term.
However, if there is an interest (and it has to be considerable to make it worthwhile, we'll likely look at getting the assets that will enable us to run off some volume).
That said, it really is over to the community to determine if this product gets wings...or....?
A suggestion: Maybe someone could open a book to register interest (bulk purchases work best and enable us to finetune our pricing). As I am not a regular on this forum, maybe that someone could run point for me on this.
So it really is over to you guys.
We'll do what we can.
All the best.
Click to expand...
Click to collapse
I am very interested!

Another case?
eaglesteve said:
Very well taken pictures indeed. Looks like real good quality pouch. Is it made to custom sizes? I normally carry my device without the keyboard, so it is quite a bit thinner and smaller. What would be the total cost shipped to Australia?
Click to expand...
Click to collapse
I have listed the product for the x7510 in our catalog:
Horizontal belt case for HTC x7510
Sure, we can make you a slimmer horizontal case.
Costs would be the same.
We would need the dimensions without the keyboard.
Shipping to Oz from NZ depends on how quickly you would want one.
Contact me through the website.
tuff-as-nuts.com

Will the 7510 case also fit the 7500/7501? My understanding is that they are the same dimensions... Anyone know offhand?

Thanks for the topic
Have anyone ever seen a vertical case for X7500 for the use without the external keyboard?

This is a bit off-topic, but personally I find the HW keyboard to be the ultimate screen-protector and would not dream of leaving home without it (even though I use my Advantage in portrait-mode 95% of the time).
On-topic again I would guess that one could use any case made for the 7510 WITH keyboard as this unit is just a bit thinner than the original 7500/7501.

trondkk said:
This is a bit off-topic, but personally I find the HW keyboard to be the ultimate screen-protector and would not dream of leaving home without it (even though I use my Advantage in portrait-mode 95% of the time).
On-topic again I would guess that one could use any case made for the 7510 WITH keyboard as this unit is just a bit thinner than the original 7500/7501.
Click to expand...
Click to collapse
No. The keyboard is the most effective way to ruin your device with scratches. Take it away if you want your unit to look new all the time. If you really must have the keybaord, put a piece of cloth between the unit and the keyboard to prevent them from rubbing against each other.

We have different experiences then eaglesteve. I have used my HTC X7500 for well more than a year with the original book cover (with the 3 clips) and have only miniscule scratches on the keyboard itself, not on the main unit.
I now also have the Piel Frama Case (since a month ago) and with this case it would be even more difficult to scratch the unit with the keyboard.
And even if this was NOT the case I would much rather have endured a scratch or two than having my screen broken due to a fall or pointed item pressing against it (even in the pouch). The solid steel of the keyboard over the screen gives me an ease of mind I will not trade for the sake of a marginally smaller "package" to carry around.
And now, with the vertical Nutshell-Pouch I hope to enjoy my Advantage X7500 for a long time since no better device (for my needs) seems forthcoming from HTC or any other manufacturer.

I agree with eaglesteve - I've had more scratches/rub-marks from the keyboard than from anything else. Keeping the keyboard as a screen protector is a non-issue, just make sure the screen faces towards your body when its in a pouch, or in a pocket. On the weekends I leave my Nutshell and the keyboard at home, and just face the screen towards my leg in my pocket.

techntrek said:
I agree with eaglesteve - I've had more scratches/rub-marks from the keyboard than from anything else. Keeping the keyboard as a screen protector is a non-issue, just make sure the screen faces towards your body when its in a pouch, or in a pocket. On the weekends I leave my Nutshell and the keyboard at home, and just face the screen towards my leg in my pocket.
Click to expand...
Click to collapse
Here you can find a scratch proof leather case. Also cheap and black (more elegant) colour.
http://cgi.ebay.co.uk/ws/eBayISAPI....m=370063633176&ssPageName=STRK:MEWN:IT&ih=024

finally after many, many tries, a case that really works. well made. beautiful. sturdy. i got the mag lock. very nice, highly recommended.

Well... I just order mine from Spain... 10/14 days to wait... will see. I'm risk 99.95 USD on it.
I just receive the confirmation email... good signal, my VISA still works.

Received last week.
Well finished... and the quality is according the price.
The X7500 fits perfectly even with it's case. Since I'm not placing the X7500 in the case with the original one there is place for my backup battery.
Great job Nutshell

This case is nice! But I always wanted a case that would allow me to hold my X7500 without the keyboard,so it would look like a slim and supersized-screen IPOD! That I can put into my pocket easily..like an IPOD.
So, I have a question for Nutshell: can you build us one? But I can someone here volunteer to provide some dimentions for an X7500 or X7501, coz I really sucked at the whole designing and measurement thing, afraid I would screw up the whole thing.

Piel Frama iMagnum - how well does it hold HD2 ?

Does anyone have the Piel Frama iMagnum case ?
If so, how does it grip the HD2 and stop it falling out ?
I guess the lower sides are rigid and since the HD2 has sloping sides it grips that way, but I'm curious to know how tight it is ... Is it so tight you feel you are scratching the HD2 sides when you push it in ?
Is it slack enough to make you feel that if you held the case up side down the device could fall out ?
Cheers
Paul.

Hi, I have had the case a few weeks now. Its very good. Nice snug fit. Doesn't scratch phone and clasps the phone so that it wont fall out. Phone can be removed easily from case but still snug enough that you can have case open and face down and the phone wont fall out.
Lift up flap does not fold right back over on itself though it may with time. Mine did not come with money holder or card holder as indicated in description at the time. Still I am very happy with the case.

Cool
That's promising.
The other question that someone bought up is that all but the tan iMagnum has a description suggesting a magnetic closure. The tan (probably a mistake) is a snap closure.
If they do only come with magnetic closure can you see what effect this has on the digital compass. If it affects it, which I would have though it would, this would be a bit of a major design flaw.
Cheers
Paul.

Need to know that as well..

Yes the magnetic enclosure does indeed affect the compass. Not something I personally use much at the minute but it could have implications for applications that you may use now or in the future.

a little off topic, just wana ask, how long did it take for you to get your imagnum from order to getting the real thing? did they send any confirmation of shipping to you prior to getting it delivered? and how's the leather quality? im currently waiting for mine, and im at day 7 now.. it does say however it takes up to 10days to deliver, but i hope i wont have to wait that long
ohya, some pics would be nice too. thanks

Even the Piel Frama guys are reading the forum
They've updated the description to the following
- Magnet closure system. (The magnets on the case may interfere in the compass function)

So is this leather case recommended? I am really hesitating before throwing my 80 euros on that.

For the german users of this forum : http://www.sanbo.de/pda-zubehoer/htc/touch-hd2/

cyclingfan74 said:
For the german users of this forum : http://www.sanbo.de/pda-zubehoer/htc/touch-hd2/
Click to expand...
Click to collapse
Why would someone buy a leather case that is not properly designed? It has a major flaw.

Xeon said:
Why would someone buy a leather case that is not properly designed? It has a major flaw.
Click to expand...
Click to collapse
In what way do you believe that Xeon.

Regarding delivery time I found Piel Frama to accurate in their delivery estimate. I was just disappointed I was unable to discard my wallet as the money pocket and card holder to get rid of some of the bulk in my pocket were not incoporated as specified. The case is light though and slim. Despite weight of phone dont notice it in my pocket but maybe thats because I used to have the case for the Tytn II.

mackers04 said:
Regarding delivery time I found Piel Frama to accurate in their delivery estimate. I was just disappointed I was unable to discard my wallet as the money pocket and card holder to get rid of some of the bulk in my pocket were not incoporated as specified. The case is light though and slim. Despite weight of phone dont notice it in my pocket but maybe thats because I used to have the case for the Tytn II.
Click to expand...
Click to collapse
Have you contacted them mackers04 to ascertain why they did not include the accessory.
We need to understand if this was a 'one-off' error by PF and if they intent to put right any shipment errors.

mackers04 said:
Regarding delivery time I found Piel Frama to accurate in their delivery estimate. I was just disappointed I was unable to discard my wallet as the money pocket and card holder to get rid of some of the bulk in my pocket were not incoporated as specified. The case is light though and slim. Despite weight of phone dont notice it in my pocket but maybe thats because I used to have the case for the Tytn II.
Click to expand...
Click to collapse
how accurate? it's been 11 days now since i placed my order and i have yet to receive my imagnum from pf.

I bought their classic snap enclosure rather than the magnum.
A great case, no magnet so no compass issue, all buttons easy to access.
Great quality and the lid does "flop" over after a short while so no problem for leaving it open. I use mine with a Krusell windscreen mount as the button on the back of the case is almost identical to the Krusell mount.
The case has 2 card slots for credit cards/money.
Very happy with it, and communication about delivery was excellent.

ag_woodward said:
I bought their classic snap enclosure rather than the magnum.
A great case, no magnet so no compass issue, all buttons easy to access.
Great quality and the lid does "flop" over after a short while so no problem for leaving it open. I use mine with a Krusell windscreen mount as the button on the back of the case is almost identical to the Krusell mount.
The case has 2 card slots for credit cards/money.
Very happy with it, and communication about delivery was excellent.
Click to expand...
Click to collapse
I saw the pics of the case. I noticed that it covers the proximity sensor ? Please tell me it's not true.

Beards said:
In what way do you believe that Xeon.
Click to expand...
Click to collapse
Actually I read the case description a week ago and suddenly after raising the issue here, they added on their website that the magnet may interfere with the compass. I bet they were not aware of that.

Xeon said:
I saw the pics of the case. I noticed that it covers the proximity sensor ? Please tell me it's not true.
Click to expand...
Click to collapse
your right - it did, i made a small hole to correct it. a minor mod but you could say an oversight on their part

ag_woodward said:
your right - it did, i made a small hole to correct it. a minor mod but you could say an oversight on their part
Click to expand...
Click to collapse
I think I read in a post that they acknowledged this oversight and they would send a new revised one to those who already bought it.

Geez.. I bet they didn't read the device specs before designing the case. Pretty stupid I find.

Best case for (roughly) £15 on expansys?

www.expansys.com
I have 2 free £15 vouchers, which would be the best option?
Thanks

Don't know what cases you are on about but the advice I would give you this:
If you intend to use the phone in the case all the time then the design that you should go for is one that leaves the whole face of the HD2 open to you otherwise you will have problems operating the phone.
Alternatively go for a case where you can take the phone out to use; however make sure the case completely holds the phone in securely when its in there.
SuperEtrader were selling a belt pouch where you could not even close the flap when the phone was in it. They claimed it was HD2 compatible.
Finally, having bought 5 cases now, you get what you pay for......
WB

I've got
http://www.expansys.com/d.aspx?i=190797
PDair Horizontal Pouch case...
Works pretty well.. magnetic clasp... with belt clip... good quality...

nutmegy said:
I've got
http://www.expansys.com/d.aspx?i=190797
PDair Horizontal Pouch case...
Works pretty well.. magnetic clasp... with belt clip... good quality...
Click to expand...
Click to collapse
i have just bought one of these for work. very good quality for the money. my only complaint is that the hard-buttons can sometimes get pressed and cause the fone to wake, depending on where you have it on you and what you are doing.
all-in-all, a good pouch.
drkmtr

Thanks
It would be nice if I could see a video of http://www.expansys.com/d.aspx?i=190797

http://www.youtube.com/watch?v=k5R_qBOEzCI

Wevenhuis said:
http://www.youtube.com/watch?v=k5R_qBOEzCI
Click to expand...
Click to collapse
Thanks, now I dont think Ill get it, I was hoping for something that the leo permanently stayed in and was accesible from

I was going toi to tell what I had ordered from Expansys and awaiting delivery for but I've just checked and the Mizu Shell - http://www.expansys.com/d.aspx?i=192254 is now discontinued and the and a Silicon Case for HTC HD2 http://www.expansys.fr/p.aspx?i=192270 is no loonger mentioned on the UK site (so I provided the link to the french.
So Im afraid that I can't help you.

cMMY69 said:
I was going toi to tell what I had ordered from Expansys and awaiting delivery for but I've just checked and the Mizu Shell - http://www.expansys.com/d.aspx?i=192254 is now discontinued and the and a Silicon Case for HTC HD2 http://www.expansys.fr/p.aspx?i=192270 is no loonger mentioned on the UK site (so I provided the link to the french.
So Im afraid that I can't help you.
Click to expand...
Click to collapse
Well that sucks....
Tell me how it is anyway will ya?

http://www.proporta.com/F02/PPF02P05.php?t_id=4862&t_mode=des
try this for a Pouch instead of a case? thinking of getting it. with the hd2 having similar dimensions to the iphone try some of the cases for that as their is millions of them
HD2 = 121 x 67 x 11 mm
Iphone 3G = 115.5 x 62.1 x 12.3 mm

Im looking for something which the phone constantly stays in, which can be opened via a flap like thing, which isnt bulky.
thanks though

[★] said:
Im looking for something which the phone constantly stays in, which can be opened via a flap like thing, which isnt bulky.
thanks though
Click to expand...
Click to collapse
do you mean like this see pics

gordofski said:
do you mean like this see pics
Click to expand...
Click to collapse
yeah thats pretty cool dont like the colour or material though, nice style though

case
http://www.cases.com/pf456.htm
The best