Does anyone have the Piel Frama iMagnum case ?
If so, how does it grip the HD2 and stop it falling out ?
I guess the lower sides are rigid and since the HD2 has sloping sides it grips that way, but I'm curious to know how tight it is ... Is it so tight you feel you are scratching the HD2 sides when you push it in ?
Is it slack enough to make you feel that if you held the case up side down the device could fall out ?
Cheers
Paul.
Hi, I have had the case a few weeks now. Its very good. Nice snug fit. Doesn't scratch phone and clasps the phone so that it wont fall out. Phone can be removed easily from case but still snug enough that you can have case open and face down and the phone wont fall out.
Lift up flap does not fold right back over on itself though it may with time. Mine did not come with money holder or card holder as indicated in description at the time. Still I am very happy with the case.
Cool
That's promising.
The other question that someone bought up is that all but the tan iMagnum has a description suggesting a magnetic closure. The tan (probably a mistake) is a snap closure.
If they do only come with magnetic closure can you see what effect this has on the digital compass. If it affects it, which I would have though it would, this would be a bit of a major design flaw.
Cheers
Paul.
Need to know that as well..
Yes the magnetic enclosure does indeed affect the compass. Not something I personally use much at the minute but it could have implications for applications that you may use now or in the future.
a little off topic, just wana ask, how long did it take for you to get your imagnum from order to getting the real thing? did they send any confirmation of shipping to you prior to getting it delivered? and how's the leather quality? im currently waiting for mine, and im at day 7 now.. it does say however it takes up to 10days to deliver, but i hope i wont have to wait that long
ohya, some pics would be nice too. thanks
Even the Piel Frama guys are reading the forum
They've updated the description to the following
- Magnet closure system. (The magnets on the case may interfere in the compass function)
So is this leather case recommended? I am really hesitating before throwing my 80 euros on that.
For the german users of this forum : http://www.sanbo.de/pda-zubehoer/htc/touch-hd2/
cyclingfan74 said:
For the german users of this forum : http://www.sanbo.de/pda-zubehoer/htc/touch-hd2/
Click to expand...
Click to collapse
Why would someone buy a leather case that is not properly designed? It has a major flaw.
Xeon said:
Why would someone buy a leather case that is not properly designed? It has a major flaw.
Click to expand...
Click to collapse
In what way do you believe that Xeon.
Regarding delivery time I found Piel Frama to accurate in their delivery estimate. I was just disappointed I was unable to discard my wallet as the money pocket and card holder to get rid of some of the bulk in my pocket were not incoporated as specified. The case is light though and slim. Despite weight of phone dont notice it in my pocket but maybe thats because I used to have the case for the Tytn II.
mackers04 said:
Regarding delivery time I found Piel Frama to accurate in their delivery estimate. I was just disappointed I was unable to discard my wallet as the money pocket and card holder to get rid of some of the bulk in my pocket were not incoporated as specified. The case is light though and slim. Despite weight of phone dont notice it in my pocket but maybe thats because I used to have the case for the Tytn II.
Click to expand...
Click to collapse
Have you contacted them mackers04 to ascertain why they did not include the accessory.
We need to understand if this was a 'one-off' error by PF and if they intent to put right any shipment errors.
mackers04 said:
Regarding delivery time I found Piel Frama to accurate in their delivery estimate. I was just disappointed I was unable to discard my wallet as the money pocket and card holder to get rid of some of the bulk in my pocket were not incoporated as specified. The case is light though and slim. Despite weight of phone dont notice it in my pocket but maybe thats because I used to have the case for the Tytn II.
Click to expand...
Click to collapse
how accurate? it's been 11 days now since i placed my order and i have yet to receive my imagnum from pf.
I bought their classic snap enclosure rather than the magnum.
A great case, no magnet so no compass issue, all buttons easy to access.
Great quality and the lid does "flop" over after a short while so no problem for leaving it open. I use mine with a Krusell windscreen mount as the button on the back of the case is almost identical to the Krusell mount.
The case has 2 card slots for credit cards/money.
Very happy with it, and communication about delivery was excellent.
ag_woodward said:
I bought their classic snap enclosure rather than the magnum.
A great case, no magnet so no compass issue, all buttons easy to access.
Great quality and the lid does "flop" over after a short while so no problem for leaving it open. I use mine with a Krusell windscreen mount as the button on the back of the case is almost identical to the Krusell mount.
The case has 2 card slots for credit cards/money.
Very happy with it, and communication about delivery was excellent.
Click to expand...
Click to collapse
I saw the pics of the case. I noticed that it covers the proximity sensor ? Please tell me it's not true.
Beards said:
In what way do you believe that Xeon.
Click to expand...
Click to collapse
Actually I read the case description a week ago and suddenly after raising the issue here, they added on their website that the magnet may interfere with the compass. I bet they were not aware of that.
Xeon said:
I saw the pics of the case. I noticed that it covers the proximity sensor ? Please tell me it's not true.
Click to expand...
Click to collapse
your right - it did, i made a small hole to correct it. a minor mod but you could say an oversight on their part
ag_woodward said:
your right - it did, i made a small hole to correct it. a minor mod but you could say an oversight on their part
Click to expand...
Click to collapse
I think I read in a post that they acknowledged this oversight and they would send a new revised one to those who already bought it.
Geez.. I bet they didn't read the device specs before designing the case. Pretty stupid I find.
Related
http://www.pielframa.com/cases_t-mobile_ameo.htm
http://www.pielframa.net/promo_ameo.asp
Just got an e-mail from Ruben at Piel Frama with all the info on the case. It's available and ready for purchase on their site now.
EDIT: Just e-mailed him asking if there is a belt clip option with this case. Awaiting his response.
ltxda said:
Just got an e-mail from Ruben at Piel Frama with all the info on the case. It's available and ready for purchase on their site now.
EDIT: Just e-mailed him asking if there is a belt clip option with this case. Awaiting his response.
Click to expand...
Click to collapse
I need one with belt clip. Their site does not show the belt clip option I have the PDair one without clip at the moment.
victoradjei said:
I need one with belt clip. I have the PDair one without clip at the moment. Need feedback asap
Click to expand...
Click to collapse
Waiting on good ole Ruben to respond.
Good News !!!
75€!!!...bad news indeed!
A belt clip isn't going to be available for the case. i emailed them last Wednesday with the same question and got a reply Thursday, and they stated a belt clip wont be available because the unit is to heavy, and they dont want to risk damage to the unit.
I think £51 for a decent leather case is not bad considering they are hand made, looking forwards to mine arriving as the T-Mobile supplied case with my Ameo has done more damage than any abuse I could throw at the device, the plastic body has taken a hammering from the retaining lugs of the case - should look good in Green
As for a belt clip, it could prove embarassing - lets face it with the weight of the unit you could end up with trousers around the ankles in a very short time - Mike
I'm just going to put a chain around it and hang it on my neck. LOL, yea right.
How do you guys work around the plastic cover for the screen on the case? In my experience, when I purchased other cases with screen covers, the device wasn't very usable as I use the screen tap all the time. I had to cut the plastic out. I may have to do it with this one as well.
What plastic cover for the screen? I see no cover.
I see a small bit of plastic covering the LEDs, and there's a cutout or window for the status display. The screen area looks uncovered to me.
Mine may be here sooner than I thought, then! Red for me, as it'll look excellent in photographs.
RichardKAthena said:
What plastic cover for the screen? I see no cover.
I see a small bit of plastic covering the LEDs, and there's a cutout or window for the status display. The screen area looks uncovered to me.
Mine may be here sooner than I thought, then! Red for me, as it'll look excellent in photographs.
Click to expand...
Click to collapse
Yes on the screen. I hope they didn't put one on there. Just makes no sense to me to put a cover on a touch screen device.
When yours arrives, would you mind posting some info on the case? Your likes/dislikes? I'm going to order one but will wait till next week possibly.
Of course I will post info, but I was told 15 days, as with the original post. If I have it sooner, then expect pictures and a mini review, because that's what I do
RichardKAthena said:
Of course I will post info, but I was told 15 days, as with the original post. If I have it sooner, then expect pictures and a mini review, because that's what I do
Click to expand...
Click to collapse
Sweet and thanks.
I wondering if they took our suggestions and implemented them into the design or if they came up with the case all on their own. I e-mailed Ruben a while back giving him a link to a post we started with things we would like to see of a case for this great device. One being the status window for when the phone is closed, etc.
I can't wait to read your mini-review.
just ordered mine. I ll let you know my thoughts and post pics as soon as it arrives
i think the window in the case (which you can see the date and time), will not work , because the keyboard needs to be closed on the screen self, and now the case is between the keyboard and the screen
Maybe i could be wrong but a short test show me that this wil not work.
Please let me know if i'm wrong on this.
cheers
tvrman said:
i think the window in the case (which you can see the date and time), will not work , because the keyboard needs to be closed on the screen self, and now the case is between the keyboard and the screen
Maybe i could be wrong but a short test show me that this wil not work.
Please let me know if i'm wrong on this.
cheers
Click to expand...
Click to collapse
Just to clear up your confusion....
Turn your keyboard round so the CLEAR (Transparent, see-through, whatever you want to call it) plastic is over where the cut-out on the case would be. Et voila! You can now see the screen.
apphoen said:
Just to clear up your confusion....
Turn your keyboard round so the CLEAR (Transparent, see-through, whatever you want to call it) plastic is over where the cut-out on the case would be. Et voila! You can now see the screen.
Click to expand...
Click to collapse
Yes but i mean, the funtion of this wil only work when the keyboard is flat tot the screen (then the screen wil turn over to the date and time function).
try it yourself without the case , and try to remove the keyboard slowely
then the screen turn out of the date and time mode.
sorry for my english i'm from the dutch.
i'll hope you see the point now, the case self suites oke with the window on it
.
tvrman said:
Yes but i mean, the funtion of this wil only work when the keyboard is flat tot the screen (then the screen wil turn over to the date and time function).
try it yourself without the case , and try to remove the keyboard slowely
then the screen turn out of the date and time mode.
sorry for my english i'm from the dutch.
i'll hope you see the point now, the case self suites oke with the window on it
.
Click to expand...
Click to collapse
Aha, I see what you mean. Yes, the cutout on this case is only useful for people like me who use the keyboard and carry it around with them.
mikealder said:
As for a belt clip, it could prove embarassing - lets face it with the weight of the unit you could end up with trousers around the ankles in a very short time - Mike
Click to expand...
Click to collapse
How would having the unit on your belt instead of in your pocket change the fact that your pants don't fit and will end up around your ankles. The same amount of weight will be pulling your pants down either way. I sometimes carry much more weight on my belt than the x7500 and my pants don't fall down you just need to wear a belt.
Sniper2075 said:
How would having the unit on your belt instead of in your pocket change the fact that your pants don't fit and will end up around your ankles. The same amount of weight will be pulling your pants down either way. I sometimes carry much more weight on my belt than the x7500 and my pants don't fall down you just need to wear a belt.
Click to expand...
Click to collapse
Either option is a non-starter for 'average' sized blokes. There's no way I could get the Athena in any of my trouser pockets.... and it would just look bloody silly attached to my belt.
apphoen said:
Aha, I see what you mean. Yes, the cutout on this case is only useful for people like me who use the keyboard and carry it around with them.
Click to expand...
Click to collapse
Um, that's not what he means at all.
What he's saying is that the Athena needs to "detect" the keyboard is flat across the screen, rather than not properly aligned or not quite attached - so the leather panel on the case will mean the keyboard is likely to not be detected and therefore, the software will not change over to display the status bar.
It depends on the thickness of the leather, but a quick test with my PDair case certainly shows this to be true. Despite the keyboard "snapping" into place across the screen magentically, the Ameo doesn't sense that it is properly closed, and therefore doesn't switch the display over to the status bar.
chekc this
http://www.bluetrade.eu/index.php?page=product&id=8720
i order it yerterday
i'll make some report as soon as possible
i order this one too (just to try to use x7500 without case)
http://www.caselogic.com/koskin_pda_slip_case/product_detail/index.cfm?modelid=57047
it seems to fit, i will see and i will report
regards
axle7517 said:
chekc this
http://www.bluetrade.eu/index.php?page=product&id=8720
i order it yerterday
i'll make some report as soon as possible
i order this one too (just to try to use x7500 without case)
http://www.caselogic.com/koskin_pda_slip_case/product_detail/index.cfm?modelid=57047
it seems to fit, i will see and i will report
regards
Click to expand...
Click to collapse
Thanks for letting us all know.
My only concerns are that the http://www.bluetrade.eu/index.php?page=product&id=8720 case found here will do exactly as the free case does, scratch the inside of the screen, and also ensure that all the letters wear off as there is no protection from the keyboard.
the great diffence is that
you can see the external screen when closed
and !!!
there is a belt clip !!!
The one from Case Logic seems promising but I don't think it will fit:
X7500 dimensions (mm): 133,5 x 98 x 16 (or x 20 with keyboard on)
Case interior dimensions: 138,2 x 82,6 x 25,4
Please report when you receive it and post pictures if you can.
Regards,
S.
axle7517 said:
the great diffence is that
you can see the external screen when closed
and !!!
there is a belt clip !!!
Click to expand...
Click to collapse
Let us know once you get the case with the belt clip. I want one like that.
This one will work, and has a velcro belt loop:
http://cgi.ebay.com/OEM-HP-IPAQ-H63...ryZ15034QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
I like the looks of the bluetrade.eu one. Cant wait for a mini review. How exactly will the x7500 fit on the belt for daily use.... Will it make you limp?
Looks to be about $49 USD for it after all shipping and paypal tax. The shipping to the US is more than the case costs
Looks to be about the same design as the Piel Frama and about half the price for people in the US. We will see what the quality is when someone gets one.
axle7517 said:
chekc this
http://www.bluetrade.eu/index.php?page=product&id=8720
i order it yerterday
Click to expand...
Click to collapse
Thanks looks good indeed.. I did order one asw ell yesterday evening, let's see, they states it will take at least 10 days to deliver...
Hi,
I like the bluetrade one BUT ... I don't think the display will work proparly because the keyboard will a little bit separated from the Athena so the magnet will not recognized the keyboard is there (as it happens with the case it comes with the Athena). This is due to the smalls grips to hold the Athena.
4 weeks ago, I found this camera bag that fits to my Athena.
The brand name is TUCANO (www.tucano.it).
When I'm wearing a suit I use to carry the Athena in my jacket pocket without any kind of case.
But the rest of the time I use to carry a small backpack. For that reason, I was looking for a case which it could be complitely closed.
As I said, the one I'm using is from Tucano and is a camerga bad. There are several sizes. My one is 'Medium'.
I hope this would help anyone.
I will add some pictures so I'm sure you will have a better idea.
Best regards,
Alberto
axle7517 said:
chekc this
http://www.bluetrade.eu/index.php?page=product&id=8720
i order it yerterday
i'll make some report as soon as possible
i order this one too (just to try to use x7500 without case)
http://www.caselogic.com/koskin_pda_slip_case/product_detail/index.cfm?modelid=57047
it seems to fit, i will see and i will report
regards
Click to expand...
Click to collapse
http://www.caselogic.com/koskin_pda_...?modelid=57047
i received it yesterday
... don't fit or nearly
X7500 gets in with dificulty but it gets
X7500 dimensions (mm): 133,5 x 98 x 16 (or x 20 with keyboard on)
Case interior dimensions: 138,2 x 82,6 x 25,4
there 's 1,5 cm left
so it's get in but it is too stretch and it is hard to get in and get then out
I'm trying to stretch it with something biger but after 24 hours still the same
it depends on the using of each one but for me for a constant use every day it s not usefull at hall
but if the "forced" stretch work i will tell you
for the bluetrade case still not received
i found this one too
http://www.hama.fr/portal/articleId*58649/action*2563#4
but no information about the interior size
if some one find tell us
regard
i found this one
http://www.krusell.se/productUni.php?productID=2527&category=50&x=10&y=12
i don't know if it good
i try to order
axle7517 said:
i found this one
http://www.krusell.se/productUni.php?productID=2527&category=50&x=10&y=12
i don't know if it good
i try to order
Click to expand...
Click to collapse
I also saw this one today.
http://www.proporta.com/F02/PPF02P05.php?t_id=759&t_mode=des
It's under the HTC X7500 category on their website so I'm hoping it fits. Aesthetically, it does not really tick any of my boxes but I've actually ordered one to try out until I get the case I really like.
can I suggest you dont carry your credit card in there as in the photo.
the magnets will do magical and mystical things.
CPA said:
can I suggest you dont carry your credit card in there as in the photo.
the magnets will do magical and mystical things.
Click to expand...
Click to collapse
Thanks for the reminder, LOL!
No cards in there at all. Just the Ameo.
case
Ii think this is even better as it protects the screen edges from the keyboard!
http://www.pdair.com/catalog/product_info.php?cPath=10900000_11000093_11000094&products_id=5551
adamelphick said:
Ii think this is even better as it protects the screen edges from the keyboard!
http://www.pdair.com/catalog/product_info.php?cPath=10900000_11000093_11000094&products_id=5551
Click to expand...
Click to collapse
It does look better but personally, I do need a belt-clip/attachment option for carrying it about.
belt clip
I says it comes with one!
you can also use the aircompact casing for a nintendo DS. it fits perfectly with side pockets and extra flap in the middle to protect your lcd and the keyboard from rubbing against each other
adamelphick said:
Ii think this is even better as it protects the screen edges from the keyboard!
http://www.pdair.com/catalog/product_info.php?cPath=10900000_11000093_11000094&products_id=5551
Click to expand...
Click to collapse
And protects the keyboard from any attempt to type on it.
It's not a BAD case; some aspects are well thought out, but it has NO belt clip option, and the keyboard is covered with a plastic sheet that warps and isn't quite flexible enough - even when new, before it had warped so much the ZXC row of keys was utterly unusable, pressing E or R would often send a half-finished reply to an SMS as it activated the soft key as well.
After a month of ownership the plastic was so bad, I traced the edges of the keyboard and cut a section out, leaving only the top row of keys covered and an edge around to hold the keyboard down.
Oh, didnt realise it had a crappy plastic cover over the keyboard! I assumed it had a magnet on the back like the original case... damn.
Im looking at either getting the nice leather case, the official HTC one "Diamond Pouch PO S390" (seen in this thread here... http://forum.xda-developers.com/showthread.php?t=403691) or this http://cgi.ebay.co.uk/HTC-Touch-Dia...photoQQcmdZViewItemQQ_trksidZp1713.m153.l1262
Anyone got a crystal case for their Touch Diamond? If so whats it like?
Im looking to protect my Diamond as I know how easy to scratch and mark they are (its doing ok at the moment but id like to keep it protected and looking like new)
Thanks, any feedback would be appreciated
I got one yesterday ( for $15 CDN ==" since i didn't want to wait for shipping)
from what i've seen so far
Seems like a great case, it is a tight fit for the diamond, so there are some worries with regards to upgrading the battery in the future....
But aside from that, it does its job of protecting my diamond and the change in dimensiosn is barely noticeable to me.
Moderators Could you move this to Diamond Accessories please, sorry, thought I had posted it in there, but hadnt.
Thanks for the feedback, sounds positive, I want to get a leather case, but at the same time its nice if i can just use it rather than get it out of the leather case to use it.
Mmm, food for thought!
yse mods please move the thread ^^"
i was contemplating the leather case as well before...
the benefit to the hard case is that its as it doesn't make it more difficult to access the phone and you dont need to take it out of the case to do anything
the only pet peeve i have with my case is that the power button on the top left is now a bit harder to press due to the case
just my 2 cents
Most of the crystal cases i have come across are dust magnets...so that puts me off them. Ive ordered the pouch today from Expansys...the official one although i have to wait 3 days before they come into stock..
Had one of these plastic cases on a samsung phone - the case cracked after a few days Lets hope these are different
One reason why im staying off silicon/crystal cases is so that I could enjoy the flushed screen.
Strange.. U guys don't seem to find it a luxury to have a flushed screen. I love it as I don't need to finger-wrestle in order to tap the 'X' button...
MasK, thats a very good point! I know what you mean there, very frustrating.
Mmm, think im just gonna opt for the Leather Case. Think I would just get frustrated with the Crystal Case.
Thanks for your feedback and comments guys.
Slightly off topic...
But do you think somebody (HTC or after-market company) will produce a soft touch / matt finish rear cover for the Diamond? I mean, its an easily replaceable, small piece of plastic and would protect (or hide) fingerprints and make it less scratchy if its soft?
Just a though... if any external companies looking it at, I'll pay £2.99 for a rip off soft touch back cover on eBay from Hong Kong
DG
New Horizontal Leather Case for the HTC Advantage X7510, X7501, & X7500 by NUTSHELL
New Horizontal Leather Case for the HTC Advantage X7510, X7501, & X7500 by NUTSHELL
Nutshell: http://tuff-as-nuts.com/index.asp?PageAction=COMPANY
I had contacted Nutshell regarding a customized Horizontal Case (black) that will fully enclosed the HTC Advantage X7510 with the leather pouch included about 2 months ago. I was able to get intouch with Ian Miller and was basically received with open arms. I was asked to submit my design and the dimensions.
The dimensions are: 5.8 inches (lenght) x 4.4 inches (height) x 1.30 inches (depth).
It is closed by a velcro flap that fully covers the top of the case preventing any accidental exposure to the elements.
The back of the case has the D ring and metal belt clip lined with leather. But in all honesty, I think it would have looked better if the metal clip was left without the leather strip cover. It would looked nicer if the silver finish of the metal clip was shown rather than hidden.
But all in all, the case is very well made. The stitches and cuttings were done right and very clean. The case will protect the X7510 and it's leather pouch while having the ability to clip it to your belt or trousers on the go.
I paid $95.00 for the case, but it may become cheaper if it will be popular.
I have attached pictures for you guys and gals to check. I believe NUTSHELL will mass produce them if the demand is high enough.
THANK YOU NUTSHELL (Ian) for a case well done.
Feel free to ask questions...
Added Pictures...
Added pictures...
nice find as i just bought myself another case but this one i like a lot better although the case i bought was only $49
Thanks Christian. Glad to help.
As this was a prototype, we have not yet given it a part number...but we shall and then post it to our catalog.
With your blessing I"ll use some of the images you have posted here.
Obviously we shall try to price it right, but as the first few will, like this one, be hand cut, pricing will have to stay the same in the short term.
However, if there is an interest (and it has to be considerable to make it worthwhile, we'll likely look at getting the assets that will enable us to run off some volume).
That said, it really is over to the community to determine if this product gets wings...or....?
A suggestion: Maybe someone could open a book to register interest (bulk purchases work best and enable us to finetune our pricing). As I am not a regular on this forum, maybe that someone could run point for me on this.
So it really is over to you guys.
We'll do what we can.
All the best.
nutshell said:
With your blessing I"ll use some of the images you have posted here.
Click to expand...
Click to collapse
Yes of course. Feel free to use it.
cktlcmd said:
Yes of course. Feel free to use it.
Click to expand...
Click to collapse
Nutshell,
Very well taken pictures indeed. Looks like real good quality pouch. Is it made to custom sizes? I normally carry my device without the keyboard, so it is quite a bit thinner and smaller. What would be the total cost shipped to Australia?
Also, a question for cktlcmd. Currently, I have a soft pouch, and taking it out is easy, as I can squeeze the soft pouch to push out the device. With a hard leather one, I imagine it is not easy to squeeze the bottom to force the device upward, so one would have to lift it up. Would that be easy? Or would the device be too slippery for that, even that I carry it naked?
eaglesteve said:
Also, a question for cktlcmd. Currently, I have a soft pouch, and taking it out is easy, as I can squeeze the soft pouch to push out the device. With a hard leather one, I imagine it is not easy to squeeze the bottom to force the device upward, so one would have to lift it up. Would that be easy? Or would the device be too slippery for that, even that I carry it naked?
Click to expand...
Click to collapse
In my case, since it also houses the X7510 with keyboard and the leather case, it is not slippery at all. It is easy to grab it on top and just pull it out. The case itself is not made of really hard leather plus it is lined inside with felt like skin to protect the device from being scratched by the case itself. The technique I use to get it out fast is to pull on top and press each sides of the case because that is where I notice the greatest hold on the device occurs.
In your case, since you will probably want Nutshell to adjust the measurements to accommodate just the device, it won't even be a problem because of the soft felt lining, it will just slid easily in and out.
It trully is a nice case. I wish they had designed it like this from the start.
nutshell said:
Thanks Christian. Glad to help.
As this was a prototype, we have not yet given it a part number...but we shall and then post it to our catalog.
With your blessing I"ll use some of the images you have posted here.
Obviously we shall try to price it right, but as the first few will, like this one, be hand cut, pricing will have to stay the same in the short term.
However, if there is an interest (and it has to be considerable to make it worthwhile, we'll likely look at getting the assets that will enable us to run off some volume).
That said, it really is over to the community to determine if this product gets wings...or....?
A suggestion: Maybe someone could open a book to register interest (bulk purchases work best and enable us to finetune our pricing). As I am not a regular on this forum, maybe that someone could run point for me on this.
So it really is over to you guys.
We'll do what we can.
All the best.
Click to expand...
Click to collapse
I am very interested!
Another case?
eaglesteve said:
Very well taken pictures indeed. Looks like real good quality pouch. Is it made to custom sizes? I normally carry my device without the keyboard, so it is quite a bit thinner and smaller. What would be the total cost shipped to Australia?
Click to expand...
Click to collapse
I have listed the product for the x7510 in our catalog:
Horizontal belt case for HTC x7510
Sure, we can make you a slimmer horizontal case.
Costs would be the same.
We would need the dimensions without the keyboard.
Shipping to Oz from NZ depends on how quickly you would want one.
Contact me through the website.
tuff-as-nuts.com
Will the 7510 case also fit the 7500/7501? My understanding is that they are the same dimensions... Anyone know offhand?
Thanks for the topic
Have anyone ever seen a vertical case for X7500 for the use without the external keyboard?
This is a bit off-topic, but personally I find the HW keyboard to be the ultimate screen-protector and would not dream of leaving home without it (even though I use my Advantage in portrait-mode 95% of the time).
On-topic again I would guess that one could use any case made for the 7510 WITH keyboard as this unit is just a bit thinner than the original 7500/7501.
trondkk said:
This is a bit off-topic, but personally I find the HW keyboard to be the ultimate screen-protector and would not dream of leaving home without it (even though I use my Advantage in portrait-mode 95% of the time).
On-topic again I would guess that one could use any case made for the 7510 WITH keyboard as this unit is just a bit thinner than the original 7500/7501.
Click to expand...
Click to collapse
No. The keyboard is the most effective way to ruin your device with scratches. Take it away if you want your unit to look new all the time. If you really must have the keybaord, put a piece of cloth between the unit and the keyboard to prevent them from rubbing against each other.
We have different experiences then eaglesteve. I have used my HTC X7500 for well more than a year with the original book cover (with the 3 clips) and have only miniscule scratches on the keyboard itself, not on the main unit.
I now also have the Piel Frama Case (since a month ago) and with this case it would be even more difficult to scratch the unit with the keyboard.
And even if this was NOT the case I would much rather have endured a scratch or two than having my screen broken due to a fall or pointed item pressing against it (even in the pouch). The solid steel of the keyboard over the screen gives me an ease of mind I will not trade for the sake of a marginally smaller "package" to carry around.
And now, with the vertical Nutshell-Pouch I hope to enjoy my Advantage X7500 for a long time since no better device (for my needs) seems forthcoming from HTC or any other manufacturer.
I agree with eaglesteve - I've had more scratches/rub-marks from the keyboard than from anything else. Keeping the keyboard as a screen protector is a non-issue, just make sure the screen faces towards your body when its in a pouch, or in a pocket. On the weekends I leave my Nutshell and the keyboard at home, and just face the screen towards my leg in my pocket.
techntrek said:
I agree with eaglesteve - I've had more scratches/rub-marks from the keyboard than from anything else. Keeping the keyboard as a screen protector is a non-issue, just make sure the screen faces towards your body when its in a pouch, or in a pocket. On the weekends I leave my Nutshell and the keyboard at home, and just face the screen towards my leg in my pocket.
Click to expand...
Click to collapse
Here you can find a scratch proof leather case. Also cheap and black (more elegant) colour.
http://cgi.ebay.co.uk/ws/eBayISAPI....m=370063633176&ssPageName=STRK:MEWN:IT&ih=024
finally after many, many tries, a case that really works. well made. beautiful. sturdy. i got the mag lock. very nice, highly recommended.
Well... I just order mine from Spain... 10/14 days to wait... will see. I'm risk 99.95 USD on it.
I just receive the confirmation email... good signal, my VISA still works.
Received last week.
Well finished... and the quality is according the price.
The X7500 fits perfectly even with it's case. Since I'm not placing the X7500 in the case with the original one there is place for my backup battery.
Great job Nutshell
This case is nice! But I always wanted a case that would allow me to hold my X7500 without the keyboard,so it would look like a slim and supersized-screen IPOD! That I can put into my pocket easily..like an IPOD.
So, I have a question for Nutshell: can you build us one? But I can someone here volunteer to provide some dimentions for an X7500 or X7501, coz I really sucked at the whole designing and measurement thing, afraid I would screw up the whole thing.
Hey guys, I was just about to purchase this case but then started wondering if it would adversely affect my signal strength so I thought I would jump on here and see if any of you have used an aluminum case and what the results were...
Thanks for any info, you guys rock!
It has a very good possibility of affecting the signal since the antenna will have a clunk of metal around it. But I dont have any first hand knowledge. Why not just get a plastic case. They effect it less.
I really want a case that has a door with a window on it..do you know of any plastic one?
Anyone else have any experience with aluminum cases?
Perhaps I am a pioneer in the area of aluminum cases and the HTC Mogul...or perhaps no one is paying attention to this thread because it's posted in the wrong area. I don't suppose an admin could move this over to the accessories sub forum could they.
Aside from this, where is the antenna located in the mogul? I'm thinking that if I do end up with signal issues I will cut slits the length of the antenna in the case.
Any info on this would be greatly appreciated!
conradcliff said:
Perhaps I am a pioneer in the area of aluminum cases and the HTC Mogul...or perhaps no one is paying attention to this thread because it's posted in the wrong area. I don't suppose an admin could move this over to the accessories sub forum could they.
Aside from this, where is the antenna located in the mogul? I'm thinking that if I do end up with signal issues I will cut slits the length of the antenna in the case.
Any info on this would be greatly appreciated!
Click to expand...
Click to collapse
Sounds pretty cool, can you link us to the particular case mentioned? Other than that I have no experience with metal (aluminum is considered a metal for the banterers) cases either. Personally I would stick to plastic, but sounds neat.
There's a link to it in the first post, but here it is again.
I've been walking around with an ipaq 2215 for the last 5 years with an aluminum case and that thing has saved my life on many occasions.
The plastic would be ok too I think, but only if I could find one that had a door that closed over the screen..
Who do you think I should talk to to get this moved over into accessories? I didn't even realize there was an accessories category when I posted this..
conradcliff said:
There's a link to it in the first post, but here it is again.
I've been walking around with an ipaq 2215 for the last 5 years with an aluminum case and that thing has saved my life on many occasions.
The plastic would be ok too I think, but only if I could find one that had a door that closed over the screen..
Who do you think I should talk to to get this moved over into accessories? I didn't even realize there was an accessories category when I posted this..
Click to expand...
Click to collapse
That case is awesome. I really like it. Interested to see if it ruins the signal quality, or possibly enhance it lol I dont know.. It looks properly designed, I am sure the manufacturer took the antenna location into consideration. I would go for it. Let me know how it works out, hopefully by then one is still available. I can grab one myself.
I will have this moved for you.
Thanks for getting this moved for me Ryan..yeah, I think I'm going to purchase the case within the next few days unless someone pipes in with a negative review.
In the meantime, does anyone know where the antenna is located in the 6800?
Thanks for any help!
So, I came in here to bump the thread up one more time before I bought the case, but it was still at the top...doesn't seem like people are too concerned about Titan accessories any longer
I guess 150 views is enough though, I think I'm just going to bite the bullet and buy.
Will update once I've tested in the low signal areas that I frequent.
I had the exact same case for my xv6700 and never had any signal issues. The case worked well and kept my 6700 looking brand new!
I really liked the lexan screen cover.
I tried the seidio rubberized case for my titan. it worked awesome for about 10 months until the little tiny tabs that held it on broke off. Only a 90 day warrenty so SOL. Now I use a cudora pouch.
So let me know how the aircraft aluminum one fits!!
That's great to hear! I'm going to order it tonight and maybe upload some pics when I get it..
hi conradcliff
dont forget test review the case (how about the look, size etc) and upload the pict, i want to buy also, but it seems need 2 week to deliver it to my country
Oh I most certainly will..I'll also post the coupon code they gave me for 10% off, hopefully it will work for anyone.
Initial Review: Monaco Aluminum Case for Mogul/6800
Short answer: A well designed, sturdy case well worth the ~ $20 price. I'll add some photos soon. Sorry if I stepped on anyone's toes who intended to write one of these up, but hey, two opinions are better than one!
I've had three of these cases for three separate Sprint 6800's. Two black, one silver. For those familiar with Monaco Aluminum Cases (they made/make these for other phones, such as the 6700), this embodiment is just as good.
Pros:
Very solid design - this case can easily outlast the life of your phone. Aside from slight exterior discoloration, dings, and scratches, this case should easily withstand all normal, day-to-day use.
Inner liner - this case includes an inner liner made of neoprene that protects the phone from minor scratch/abrasion marks; that provides a very snug fit for the phone; and provides *minimal* fall protection. Two-story drops and projectile usage by angry girlfriends are not protected.
Access - the case provides access to all buttons, dials, interfaces (except for touch screen & slide-out KB). Luckily, almost all functionality of this phone can be effectuated without the touch screen (not the TP, grrrr), so you will not have to open the case too often, which is very nice. When you do open the case, the keyboard slides over the open top of the case nicely.
Vents (Air/Signal) - there are vents on the top, back, and right side of the case for air and/or signal paths. I've experienced no signal difference, or even heat difference, with this case. I'm sure it does insulate the phone to some degree, but it's minimal.
Belt Clip - the case comes with a belt clip and swivel that are relatively secure and convenient. I've had one belt clip split (the plunger portion), but it is still very usable. You don't have to use them, but I do. The round swivel that screws into the back of the case provides a nicer grip of the phone, IMHO. If you don't like either, you don't have to use them.
Cons:
Weight - it does add weight to your phone. It's not extreme, but holding the phone for extended periods of time may prove annoying by some with this extra weight. I don't mind it at all, and I have a headset and use speakerphone anyhow.
User Adjustment Required - Out of the box, this case is NOT ready to use! You absolutely must gauge how well the metal clip engages the main body of the case. Every case I've received required me to slightly bend the clip inwards to provide a stronger hold. If the hold is too weak, brushing against the side of the case (by your arm when walking with the case attached to your waist side, or by anything you may brush against) can result in your phone falling out to the ground. So, adjust the clip right away, and ALWAYS, periodically check it, as repeated opening may loosen the hold over time. Also, when wearing this case attached to the side of your hip, attach it to your left side so the metal clip and catch of the case are facing behind you. This way, brushing against something while you're walking will not accidentally open your case allowing your phone to drop out.
Plastic Cover - this cover can scratch. I tried placing a screen protectors over it, but they would never stay. The oil from your face/hands/etc, along with the lack of a frame protecting the edges of a protector from friction are mostly to blame. However I've learned that with a little care, the plastic screen can survive everyday use quite nicely.
So, I highly recommend this case!!
10% off coupon code -> EIWQC1257830
"Simply insert the coupon code during our checkout process and instantly save 10% off the merchandise.
You can use the coupon up to 5 times. This code will expire after 60 days [from 10/7/09]."
There's more to know though so don't buy until you get my review..hopefully tomorrow.