While updating my (o2 mini s-K-jam-9100) with Aku rom, my ppc's battery get out of charge and updating interrupted.
I tried to power on the device but no answer. I put it to charge and connect to my computer , charging led doesn't light also I could not get into bootloader mode
Try charge it for a few hours with your original wall charger, or look for another (fully charged) battery from someone.
Then try to get it in bootloader mode, if that doesnt work I think you have a really big problem pal.
But another question, when running the RUU upgrade, they warn you that your battery must be at least 50%, didnt you notice that?
upgrade rom MrClean_RUU_WIZARD_2240001a_AKU23_WWE battery %25 bootloader mode impossible
I have a problem with wizard too. While loading rom error appeared and phone became dead (4 steps error message). I can't enter into bootloader mode. Phone takes ~0.11A and blinks while taking off battery. Battery changing and charging didn't help. Resets, manual bootloader mode, waiting for phone to boot... nothing. Totally no reaction. Any suggestion what's going on?
cold-reset to end main battery i wonder?
HELP! ya yardım ya hiçmi anlayan bilen yok yaa?
molski said:
But another question, when running the RUU upgrade, they warn you that your battery must be at least 50%, didnt you notice that?
Click to expand...
Click to collapse
LOL no kidding...the app should really make you check a box or something acknowledging that your battery is fully charged before you can continue. And while they're at it, put a latch on the USB port that won't let the cable go until the update is done. If I ever run into one of those people that yank the cord in the middle of an update and then whine about it, I'll kick his ass. I wonder if they set their clock's alarm, then yank the plug out of the wall and complain the next morning when they're late for work? :lol:
ne diyorlar biri türkçe açıkmala yapsın
Okay heres what happened. Last night whilst flashing my xda IIi to the 1.162 with O2 stripped out and camera fix rom, the winbloze bsod came up when it was part way through the CE part of the flash(the third part). The phone said it was complete but woudlnt boot up so I rebooted the pc and went through the whole flashing process again, which worked ok. I restored my backup and all was working well. This morning on the way to work I was using it with the wireless connection in operation and all was well. I switched it off and put it in the inside pocket of my jacket, to get off the bus to go to work and when I got into work I went to put it in the cradle and realised that it was very warm. Further more it would not switch when the power button was pressed. I took the battery out and tried my fully charged spare battery and whilst the boot up screen did come on quite clear initially, then it faded to blank white and now the screen is black and there is no response.
I tried a hard reset but still no response and the charging light does not come on when I put it in the cradle. If I take the battery out and put it in the cradle I get a flashing red light where the charging light is but otherwise, no other response. Is it dead? Is there nothing else that I can do? Please help someone as I am very attached to that device.
TIA
BTW the flashing red light when there is no battery in..... it flashes in a certain sequence of flashes. Does anyone know if these are error codes, pretty much like a pc will give a certain amount of beeps if there is a boot up error? amd does anyone know how to interpret them.
Once again, thanks in advance for your help.
are you try another bettery I think your bettery die
I have two original batteries, both do not work .
are you try to go to bootloader and flash it again I think 1.11.171 is the best rom
Update!!! Its life Jim but not as we know it!
Okay after leaving it on the cradle without a battery in for about an hour and a hard reset, it booted up to the windows mobile screen. After setting up the screen and such I was able to access the pda and restore a backup however
there is still a problem. It phased out a few times(screen faded to grey/white) and after setting up again it remained on but upon checking the power status I found that although the main battery was charging well the backup battery is on Zero and not charging. It has been so now for the last
3 1/2 hours sooooo that means that if the main battery loses power then I lose everything, also the bootloader has gone missing
I have this problem too with 2 of my xda II's its definatley not the battery as the battery works fine in my spare that i dare not update any fix for this yet?
helping you
hi im noel
can i know if any one help or did solve your problem in your xda 2i? i can help you just pm me...
Hi all...
First of all... i've searched in the forum but couldn't find the answer.
I have a G3 CID unlocked phone; and flashed many custom roms all with success...
This morning i saw the new TNT 4.0 and off course i wanted to try this one.
Flash went well through 100%; and at the end i saw a block from mcafee service center that there was a blocked item; and if i wanted it to be stay blocked or remove block. (i don't know what the blocked item was unfortunatelly)
The update was cancelled and the device stays in bootloader mode (so that's good i guessed.)
When i try to reflash (have tried TNT4.0 reflash, tried buttom rom flas, tried stock rom flash) the progress bar appears.
Then thew bootloader suddenly ""reboots" and the flash terminates.
I think i tried everything now... anyone a suggestion what to do?
IPL/SPL 3.08 and radio 2.0.19 dutch ship
thanxx
ow yeah... i've also tried another computer with no mcafee security center on it...
hmmm I think I found the answer....
Rebooting is caused bij an low battery.... battery had been charged whole night on USB... so he said it was fully charged...
I've put the phone on the wallcharger; and the bootloader appears... the led doesn't show it is charging (i can imagine that this is controlled by the OS) but when i charge the battery for 3 minutes the flash goes up to 100% and then reboots again... so I think it has something to do with the charging. I will charge the battery for a little longer and try the flash again.
SOLVED
Ok and that was the answer... charged for about 15 minutes with the wall charger and it flashed.
maybe if someone else has the same issue he/she can take its advantage
thanxx anyways
mouragio said:
Ok and that was the answer... charged for about 15 minutes with the wall charger and it flashed.
maybe if someone else has the same issue he/she can take its advantage
thanxx anyways
Click to expand...
Click to collapse
I have a similar problem, I'll try this in an hour or so, wizard is n the wallcharger right now.
Thanks for the advice...
I am in believe that my battery has to be replaced... when the phone is 100% full; it drops to 50/60 within the hour; and then suddenly he can/will be completely discharged....
At this moment i am in search for a new battery in the netherlands (for an reasonable price....
uh...Hello, title says it all. I just picked up an 8125 and liked wm5 but really wanted wm6. So, I did my research found the files and guides I needed and started to do my updating. Now the problem is when I did the RUU (Vista version) everything was going well. I got to around 90ish percent (it picked up speed towards the end) and then she crashed and went back to the boot loader screen. So I tried the recovery mode, only to find my phone keeps flashing on and off back light comes on screen goes to the 3 colored bars and then the light goes off and a few bars of the screen slowly fade out only to come back to life again. Now the odd thing is, I had 100% battery when I started (plugged in for 6 hours previously) and I hadn't had the phone go dead on me before. It's been a few minutes now and the blips keep speeding up (I suppose the battery is giving it's last few gasps). Do you guys have any ideas as to why this would happen (I didn't notice any short battery life issues previously)? Perhaps I should order a new battery and reattempt the flash? I apologize in advance if this has been answered previously or posted in the wrong section (I did do a forum search previous to posting). I would very much like to recover my latest investment. Oh yes, plugging it into my usb/power adapter will cause the blips to pick up pace a bit, though the screen has been silent for the last minute or two (while plugged in). Thanks in advance for any replies.
If you can enter the RUU then everything is ok(the 4 color screen which has "RUU" at the top right corner). I think your battery is dead, what you should do is order another battery or turn your phone off and plug the usb cable in (it should charge). After you got your power issue solved, flash the base rom (t mobile 2.26) then flash the rom that you wanted(remember your device must be SIM/CID unlocked)
Can't get it to charge which sucks. I just bought a battery and am just waiting to get it. I was in the middle of doing the IPL downgrade so I could do the CID unlock when it died. Well, I hope I can get past this.
Charge the battery with Wall charger or with some friends pda,get into bootloaders (multicolor screen) and flash the official rom to recover back.
Just flash the base rom as zabardast_1 said then use Wizard Service Tool to sim/cid unlock then do what you wanted
Just got my battery, luckily it came with a good charge and it finished the flash I'll see if I can hit the CID unlock with the button rom in WST if not I'll try zabardast_1's one.
Wel i just finished up with a successful flash to the tmobile 2.26 with xda mobile 6, runs great
Hello good people,
I've been searching the forums but i don't seem to be able to find a solution for my dead kaiser.
I'll explain the problem:
When i push the power button on my Kaiser, it start's booting the first part, displaying the "smart mobility" slogan by HTC, after a few seconds, some data appears in red, in the right lower corner of the screen, this is what is says:
R 1.27.12.11
G 22.45.88.07H
D 1.56.00.00
After displaying this for a while (about 1 min.) it goes to the Windows Mobile Splash Screen.
After displaying this for a few seconds (5 to 10 secs) it makes the "empty battery" sound and shuts down.
Can someone help me ?
*** And NO, the battery is NOT empty ... i've charged it over night, and the power light was green. ***
I've tried booting with and without SIM and MicroSD cards ... makes no difference.
ttenhag said:
..snip*** And NO, the battery is NOT empty ... i've charged it over night, and the power light was green. ***
I've tried booting with and without SIM and MicroSD cards ... makes no difference.
Click to expand...
Click to collapse
Will it boot with the phone plugged in to power?
Bill
Yeah, try booting with the charger on. Chances are that your battery' life is out..
Reagdrs,
Carty..
I have had the same thing and wondered if it was the battery... except that sometimes it will stay on for about 2 minutes, sometimes half an hour... but most of the time as soon as it goes to the Today screen, I get the battery dead sound and then it turns off. I am going to try to use another battery to see if that makes a difference.
it's not the battery
I've tried with the power cord on the phone, it does 2 things:
1. The same thing as i said before
2. Doesn't boot at all, it halts on the screen where the red data shows up and stays there until you take the power cord off and the battery out.
It does one of these things, randomly.
I've also tried with another battery from my friends kaiser which works perfectly.
So i guess it's not the battery, anyone another idea what it could be?
Might be something wrong with the firmware or anything? problem is, i can't flash it if it doesn't boot can i ??
any ideas ?
Today i managed to get my hands on a brand new kaiser battery, my uncle has a brand new kaiser and i borrowed his battery.
His battery was full, i put it in my kaiser and tried booting, same problem as above.
I've tried with the power cord plugged into the phone, the charging led went on, and i tried booting, same as above.
Later i've tried with the USB cable connected to the phone and the computer, still the same.
I've also tried soft&hard resetting with the new battery, no succes.
So therefore, i believe it's not a battery or a power problem, it must be firmware corrupted or something of the hardware broke ?
Does anyone has any idea how i can try to re-flash this thing ? to find out if that might be the problem ?
It's not the battery. Could be a bad flash or something. Try to reflash it. Yes, it will reflash even though it won't "boot" as you say. Try to reflash and then report back. Remove the memory card for now.
Also, what Rom and SPL are you using?
Ur going to have to force it into the bootloader to flash it, no biggie. Just hold down the power and camera buttons, and hold the soft reset button with the stylus, untill you get the tri color boot screen. Then flash away! I would flash a stock rom until u can tell weather your problem is hardware related or not. If hardware related keep the stock rom and spl, and try to warrenty return it.
O.k., this just happened to my Brand New kaiser last night too, WTF! Was running fine when the low battery icon came up with half battery life n shut down, now it wont start up at home screen for more than 3 secs before it shuts down and says the battery is dead even while its plugged in! There's no way to reflash or hard reset since it doesn't stay on long enough to do so. Just ordered my replacement, but reading different forums, it seems many people have experienced this with Kaiser and most around the same time, again, WTF!!!
kaalgoosy said:
O.k., this just happened to my Brand New kaiser last night too, WTF! Was running fine when the low battery icon came up with half battery life n shut down, now it wont start up at home screen for more than 3 secs before it shuts down and says the battery is dead even while its plugged in! There's no way to reflash or hard reset since it doesn't stay on long enough to do so. Just ordered my replacement, but reading different forums, it seems many people have experienced this with Kaiser and most around the same time, again, WTF!!!
Click to expand...
Click to collapse
Does it power off while beeing in bootloader? You doesnt have to start the device up to get into bootloader you know. Try checking if it shuts down while beeing in bootloader, if its not just reflash. Another thing, what spl and rom are you guys having this problem using?
It's alive!!!
Finally got it to bootloader mode before it dies and reflashed and it seems to be running just fine now. Using spl ver.1 with schaps 4.30 wm 6 (although users running the stock rom had the same experience). Got the "smart chip not provisioned mm 2" message most likely from at&t killing my sim card from a reorder as they did when I Returned the Iphone which is a rediculous policy(policing); having to constantly contact at&t to update to a new sim. Still, it makes me wonder what caused this defunct in the first place, and if it'll happen again tomorrow or the next day. Reflashing and reinstalling cabs is a Real *****, especially for a pda where people use their device for business and gather a collection of missed calls and lost connections when the Os decides to randomly crash. As much as I dig htc's devices, it's kinda strange how HTC, with such a huge marketshare with pda's, is so quiet about updates or firmware fixes. Anyways, long live the only source for htc fixes, XDA!!
Mine is still completely in the state in which i got it.
Just the stock HTC Firmware, rom's and loaders
Okay, a little update.
How the hell can i flash this thing if it keeps on bugging me with the "Wrong vender ID" message when i try to flash it ?
I know, install HardSPL ... but how can i ? without a possibility to connect ActiveSync?, you'll have to start the device for that and run activesync, but i can't because it won't even boot.
Is there any other way of getting this device to allow me to flash without needing to boot it up fully.
I have no problems getting in to the Tri-Color bootloader, but no further.
When updating it gets to 1%, then my PC gives the message: "Wrong vender ID, please use your own device's update utility" and the phone stays at 1% till i rip out the battery.
ok guys I have the same problem with two of my kaiser's
I can power them up but in aproximately 1 minut goes off, no matter if the charger is plugged or not, it doesn't make a difference
I can put the phone in tri-color screen and stays there with no problem
and I can flash them with no problem because they are olipro already
but after flash them with anything still the same problem ???
so if anybody has a clue or maybe a rom to fix this would be great
thanks
best regards
linterna
One more thing. I have the same problem but mine when starts flashes Blue LED when was good hasn't. I Started few times and it works for 2-3 weeks and again. Best to do is to not use camera. Every time it happends i ise my camera and battery was middle-low. I think its some problem with camera. Many times it don't want to start up or saids that there is no memory for saving photo. Maybe i should flash rom from wersion without cameras.
im having the same problem, has anyone solved this?
Yeah solve . HTC as a kids toy .
Buy Nokia! Or SonyEricsson.
I won't buy smartphone ever again.
Does not boot to the OS
I have the similar problem...... My kaiser is dead not even booting with battery only (not plugged to the PC or external charger).
However when I plugged it to the power source it boots up and continue to the OS and boom (shuts off) in split of second.
I tried different flash and it propelry boots and got windows up and running when plugged to the PC with the old ATT test ROM which I got from the xda threads.
But with the latest roms it wont boot to the windows , it dies before that.
Anyone having idea what could resolve this.
any update on this? i am having the same problem. i tried a hard reset already with no success it goes to the splash screen and says "the device is clearing the storage. please wait" then pings and turns off
r 1.65.21.18
g 25.88.40.05h
d 3.57.00.00
my phone is completely stock and has never been unlocked or messed with. found an updated at&t rom, i ran it and none of the numbers change in the bootup, then goes to the splash screen and says again "the device is clearinng the storage. please wait" and then pings and turns off.
also i have been searching for the oilpro or jockeyw hard spl files on google and on here but have found nothing, the search function doesnt seem to be able to find much.
any help would be appreciative, thanks in advance
Don't mean to hijack but didn't want to make my own thread when this one was here. I'm not having exactly the same problem as everyone else but I am having a battery issue. It works fine and says it's charging when plugged in but when I unplug it the battery goes down fast (like 1-4 % a minute) and when it hits around 70%, it shuts off. Then whenever I turn it on, it immediately shuts down before the Today screen fully shows (like others are mentioning here). I have to plug it back into the charger to get it to turn on again.
Could this be a bad flash too..? I know I did one of the latest HardSPLs and tonight I just now updated to the latest stock AT&T ROM. But it can't be a flash because the night I got it (bought it used on eBay), I was playing with it not plugged in using Skype and it shut off on me. I didn't think much of it and had always had it plugged in since then.
I'm assuming I simply need a new battery.. I've emailed the original owner and she says she never had any problems with it like this.
Zerxer said:
Don't mean to hijack but didn't want to make my own thread when this one was here. I'm not having exactly the same problem as everyone else but I am having a battery issue. It works fine and says it's charging when plugged in but when I unplug it the battery goes down fast (like 1-4 % a minute) and when it hits around 70%, it shuts off. Then whenever I turn it on, it immediately shuts down before the Today screen fully shows (like others are mentioning here). I have to plug it back into the charger to get it to turn on again.
Could this be a bad flash too..? I know I did one of the latest HardSPLs and tonight I just now updated to the latest stock AT&T ROM. But it can't be a flash because the night I got it (bought it used on eBay), I was playing with it not plugged in using Skype and it shut off on me. I didn't think much of it and had always had it plugged in since then.
I'm assuming I simply need a new battery.. I've emailed the original owner and she says she never had any problems with it like this.
Click to expand...
Click to collapse
I've just started having the same problem as you. Very annoying. Mine phone is a year and a half old now, so i'm assuming the battery is coming to an end.
Charge battery, will last a while, but goes down to around 80-70% and then it says plug power in blah blah blah and dies. Then when you charge it, it stays on one or 2 bars for a bit and then jumps to 100% fully charged.
Saw a procedure to "reset" the battery. Supposedly have to take the battery out for a bit then plug in and charge fully over night with the phone OFF. None of this seemed to work for me... I'm due for an upgrade in January, so is it really worth paying for a new battery... hmmm