Database Develop

Perfect PDA Phone:XDAIIi like w built in GPS receiver &

I know people with a pda with GPS receiver built in, like the Yakumo or the Mio168. It's great that you don't have to bother with charging a bluetooth adaptor or getting connection and it's more compact.
http://www.pdashop.nl/product/11712
At the back you have a small metal plate that you can turn up as the gps receiver.
It would be great, an XDAIIi like PDA Phone including an integrated gps receiver and wifi! The receiver is above at the back (where the lens of the xdaIIi is), i would gladly give up the camera with poor quality for this built in receiver. I just downloaded pugs camera rom update with better cam, but nothing compares a real cam with flash. So better off with a built in gps receiver I find.
I wonder if there are any PDA phones like the XDAIIi with wifi & gps receiver integrated yet? Maybe a new future Qtek? Would be great!
This would be the only pda phone wich I would give up my xdaIIi.
Anyone knows this dream pda-phone exists?

wait for the new mio ..i'm gonna buy 1 in the near future after it has been on the market for a while and all the bugs taken out...never get caught short again like with the xda2i ...if i can help it that is
link
http://www.spiritualgate.com/articles/articles/126/1/MIO-A701-Smart-Phone

You forgot integrated WIFI (not on MIO A0701)
Yeah, but it hasn't wifi integrated, still have to buy an external sdio wifi card. I'm comming from an XDAII to XDAII especially cause wifi was integrated, now gps is integrated but no wifi.
Still no all in one solution... And i think this will not be so flexible like xdaIIi with all the rom upgrades, tools and forum.

Re: Perfect PDA Phone:XDAIIi like w built in GPS receiver &a
Innovator said:
I know people with a pda with GPS receiver built in, like the Yakumo or the Mio168. It's great that you don't have to bother with charging a bluetooth adaptor or getting connection and it's more compact.
http://www.pdashop.nl/product/11712
At the back you have a small metal plate that you can turn up as the gps receiver.
It would be great, an XDAIIi like PDA Phone including an integrated gps receiver and wifi!
Click to expand...
Click to collapse
Ah, you want this ? : http://www.expansys.com/product.asp?code=129261
The i-mate PDA-N with built in GPS, Bluetooth and Wi-Fi, is the first Pocket Pc with built in GPS from i-Mate. Complemented by the 2.8-inch LCD capable of 240 x 320 pixels, the PDA-N offers exceptional GPS reception and spotless navigation to its users. Over all the PDA-N has high marks for looks with its large high-resolution screen and slim form factor. It is about the same size as the i-mate JAM.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Isn't it ugly
:lol:

Nice try, but this is no PDA Phone!
This is only a PDA with WIFI & GPS integrated but no GSM functionallity like the XDAIIi.
See it's hard to find, or still have to come out yet
Keep on searching

eish you are hard to please Innovator :wink: :wink: but that i-mate certainly looks good ,as i only want it for phone or navigating with wm2005 ,i wonder which is gonna be the better phone then

Sorry, guess i assumed it would be a Phone-PPC like all I-mates

USB to 3.5mm Audio Adapter - The good and bad

I bought one of those little adapters on ebay, such as the one you can see here: Link
Couple of things:
- Music - it now sounds brilliant through my personal headphones - the ones that come in the box with the diamond are indeed complete rubbish. But that was fairly obvious anyway. I'm impressed with the quality of the diamond now.
- Taking calls. Now we have a BIG PROBLEM. When a call comes through, the audio is routed through to my headphones as you would expect. But the problem is that the diamond must think there is a microphone attached as well, as noone can hear me speak until I pull the headphones out of the diamond and it's internal mic kicks in!! Then when the call is ended the music starts blasting out of the speaker of the diamond while I'm madly trying to plug the headphones back in, amidst getting all sorts of annoyed looks from people next to me on the tram that WERE sleeping until I woke them up..... Woops
Does anybody know a workaround for this? How can I make the diamond think there is NO microphone plugged in when I'm using the headphones?? Will I have to short some pins on the connector...? Anyone have the pin layout for the 11 pin HTC connector? Or is there an easier way.... Help from the experienced is appreciated. Cheers.

OK so here are the pinouts:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So it would seem that 'disabling' pins 7 and 12 on the adapter might do the trick.... Or maybe they already are disabled on some of the adapters out there..
It's going to be hard to do on such a small thing... Does anyone know a way to trick the OS or disable it in the registry somehow??

check this out
I got one of these http://www.amazon.com/Synch-Charge-...r_1_2?ie=UTF8&s=apparel&qid=1215060921&sr=8-2 from Amazon and it works like a charm. You might want to try this.

jforme said:
I got one of these http://www.amazon.com/Synch-Charge-...r_1_2?ie=UTF8&s=apparel&qid=1215060921&sr=8-2 from Amazon and it works like a charm. You might want to try this.
Click to expand...
Click to collapse
Have you try this adpater to listen to radio without the headphone. By plugging in this and set the radio to speaker phone.

what about that ??
you can plug any 3.5 headphones you want, it works for the fm radio, and you have a mic so you can talk when receiving a call without having to do the unplug replug acrobatic move you used to ....

salada2k said:
I bought one of those little adapters on ebay, such as the one you can see here: Link
Couple of things:
- Music - it now sounds brilliant through my personal headphones - the ones that come in the box with the diamond are indeed complete rubbish. But that was fairly obvious anyway. I'm impressed with the quality of the diamond now.
Click to expand...
Click to collapse
Hm... I plugged in mine (I use the RC e100), and somehow all other headphones (also high quality one) I have are all worse then the one within the box =( very annoying, as the the htc headphones are far to big and ugly =(
Also the whole audio stuff is poor on the diamond - I read s.th. of an audio booster bug, but no way to cure it =(
What have you done to have such a good qualtity?

Thanks for all of your replies.
I ended up going with the RC E100 as you suggested and some other people here seem to think they work well. Well, they definitely do!
I've plugged my Sony's into them and they sound awesome. Really impressed with the audio quality now. Just have to figure out where to hide all the cable!! 2 metres + hiding inside my jacket! Might have to get the scissors and soldering iron out and re-work it...
The only problem is that the supplied driver with the RCE100 does not install on the diamond, or maybe its a problem that I'm using Vista with Windows Mobile Device Centre instead of Windows XP with Activesync. I will try and install the CAB file manually.
The Play/FF/RW on the headset only controls the built-in audio player in TouchFLO 3D, need to figure out how to make it work with Core Player.... And to answer you question Basthet, it sounds much better with Core Player, no audio booster bug, it has built in pre-amp and also equalizer and you can make your music sound very very nice with it. Highly recommended. It does not cure the little skip you hear in audio tracks; it is now clear this is an Operating System/Hardware issue.

I know that acrobatic move that you speak of, and it made me laugh to see that I'm not the only one running into that problem. Happened to me while official exams were being held in the classroom nearby, nearly got me expelled.

IGO8 recognized TMC hardware on my diamond. Anyone else?

After upgrading my radio firmware and having the latest IGO8 installed, I tried having it auto configure TMC. After awhile, it said 'TMC Hardware found' and moved to a 'TMC Station Settings' screen. Since TMC is not used in Canada (?) I cannot test anything.
Can anyone else who has a similar setup and lives somewhere that TMC is used, try having IG08 Auto-Configure the TMC hardware, and report back with their results?
Radio firmware = 1.00.25.08
IGO8 v 8.0.0.49545
Daren

Wow that sounds quite interessenting.
Unfortunatly I have uninstalled iGO 8 on my device and kept on working with TT7. So I am not able to test it at the moment.
I might try it with TT7 today.
Greetings...

Protocol?
What protocol did iGO find?
Can you scan radio channels?
I have the same iGO version with .05 radio and it didn't find TMC for me.

My Igo8 found TMC too, but no Channel scan. I use the 1.03.25.18 Radio, but I think it finds the FM Radio, even with headset put in no TMC Signal.
Ghostrider

Here also TMC is detected now!
Tried automatic channel-scan with headset plugged in, but no signal was found... :/
I also cannot chose FM-Frequencies manually:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Protocol: Siliconlab
Port: COM3
Same problem, "No TMC Signal"

You have to plug in the headphones because the lead is the antenna.

i have the same problem like capsman and fhsieh.
it does not work also with headset

same, "no signal"
(headset plugged in)
it doesn't start to search, or do anything, so I think it won't work in this way.

Here the same on a Touch Pro. Same protocol and port number, but no signal and no tuning possible Maybe we need som xda-developer to hack the Radio module in our phones..

I've got a touch pro (fuze) and it doesn't find any tmc hardware. anyone have any suggestions on this?

S20 FE Snapdragon Low Volume

Hello there. I have been using the device for about 2 weeks and the device is very nice. However, the headphone volume is low, the speech volume is also low. How can I solve this problem? Thanks.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

share the device model number and software version please.
So the volume issue doesn't go away even if you disconnect/forget and reconnect?
Have you tried to cache clear or network reset the device?
If the above doesn't work, then try booting in Safe Mode to see if it still happens.
Lastly, submit error report to Samsung Members app or Wearable app for professional support.

TheNewGuy92 said:
share the device model number and software version please.
So the volume issue doesn't go away even if you disconnect/forget and reconnect?
Have you tried to cache clear or network reset the device?
If the above doesn't work, then try booting in Safe Mode to see if it still happens.
Lastly, submit error report to Samsung Members app or Wearable app for professional support.
Click to expand...
Click to collapse
Device Model : SM-G780G/DS
Software Version : Android 11 (One UI 3.1) September Update
I am using wired headphones.
I tried in Safe Mode, the result is still the same unfortunately.

Look at advanced sound settings, play with those. Also check through Developer options with headset plugged in.
Try clearing the system cache and a hard reboot.
Play with sound settings volume control, cycle from minimum to max a few times.
Make sure volume limiting isn't active.
Load Galaxy Sound Assistant, at the least it will give you more volume level steps.
Consider a pair of Buds+ as they work very well especially for calls. I don't like a phone glued to my face...

BrkAkn07 said:
Device Model : SM-G780G/DS
Software Version : Android 11 (One UI 3.1) September Update
I am using wired headphones.
I tried in Safe Mode, the result is still the same unfortunately.
Click to expand...
Click to collapse
wired USB c headphones or wired 3.5mm into an adaptor ?
either way you may have a compatibility issue, that's what I'd look at first. there is a setting about USB pass-through audio routing in developer options, check that if they're USB c headphones. if you've got an adaptor it'll need to have DAC built-in to work right.

as noted above by others, the connector part or the wire segment may be defective, test the headphone on other devices if possible. If the headphone works okay on other phones then it is possible the phone's port is bad. You can have it checked at authorized service center which ever is near you.
If nothing is seen to be damaged or defective then submit error report to Samsung Members after reproducing the issue, it may be a software issue.

Hi to everybody, I have more or less the same problem, or rather in headphones the volume is fine, but it is low both in capsule and speakerphone (much compared to my old LG V30 that still use as a second phone).
Unfortunately I rooted it without even thinking about making a call first, I didn't expect to have this problem so I can't contact support.
With other phones, years ago, I used to edit the mixer_paths.xml file and managed to raise the volume even a lot, is it no longer possible to do this?

Question Can't pair Bluetooth with car

Hi,
When I updated my pixel 7 in January 5 "Security update" it never a pair Bluetooth with car .
The notice appeared "Bluetooth connection failed. Verify the passcode and your phone settings." , but I'm sure about passcode was correct.
I tried every step following:
-Forget and reconnect
- Rest Bluetooth
-Developer options then change AVRCP Version from 1.5 to 1.3,1.4....etc
-Last Factory rest
I used another phone to connect it connect without any problems, but the pixel 7
passing code Not accept my car.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Scropion_7 said:
Hi,
When I updated my pixel 7 in January 5 "Security update" it never a pair Bluetooth with car .
The notice appeared "Bluetooth connection failed. Verify the passcode and your phone settings." , but I'm sure about passcode was correct.
I tried every step following:
-Forget and reconnect
- Rest Bluetooth
-Developer options then change AVRCP Version from 1.5 to 1.3,1.4....etc
-Last Factory rest
I used another phone to connect it connect without any problems, but the pixel 7
passing code Not accept my car.
View attachment 5816257
Click to expand...
Click to collapse
Known issue.

There is workaround, You need to start any call then connect to the bluetooth of the car after you hangout it should stay connected to the bluetooth of the car.

Delete the phone from your car's system and start the entire process over.

MarioHWahba said:
There is workaround, You need to start any call then connect to the bluetooth of the car after you hangout it should stay connected to the bluetooth of the car.
Click to expand...
Click to collapse
This works but doesn't reconnect after the car has been off. Has anyone got it to stay permanently? Ta

technotika said:
This works but doesn't reconnect after the car has been off. Has anyone got it to stay permanently? Ta
Click to expand...
Click to collapse
Unfortunately you need to do it everytime
Hopefully google solve this bug with the next update

MarioHWahba said:
Unfortunately you need to do it everytime
Hopefully google solve this bug with the next update
Click to expand...
Click to collapse
Or you could plug it into the car via USB instead of fighting with the Bluetooth. I know that defeats the purpose of a fix for Bluetooth, but it's an easy work-around in the meantime.

About to test this ...

Fixed!

Hello, Can someone confirms the february update BT fix ?
I dont want to update and downgrade one more Time

Maybe you can't see my posts, tested and problem gone (for me anyway)

technotika said:
Maybe you can't see my posts, tested and problem gone (for me anyway)
Click to expand...
Click to collapse
Yes i have seen, but between 'official' announces and reality...
Thanks for your test and confirmation

Obviously was device based as I NEVER EVER had any bluetooth connection issues.
And I´m using BT a lot!
But feels good anyway they fixed a problem others had...may have eventually affected me some time.