Hello everyone:
I have searched the thread but could not find the solution to my problem.
I installed Transcriber, but when I try to select it as an input method it does not select and continues to show me the virtual keyboard.
I uninstalled it and installed it again in my storage card and the problem still persists. I tried installing and uninstalling a few times, reseting after each and the problem does not seem to dissipate.
Any help or insight would be appreciated.
I am using Crossbow 1.5 and T-Mobile UK Radio Rom on a G3 Unlocked.
Hi, You may double check that transcriber is included in that rom. Transcriber was until recently often deleted in order to make room for other applications in custom roms. I know mfrazzz started using the compression and packing technology from my Rom-Packer kitchen recently and his newer roms may include it now. My rom does include transcriber.
Best wishes,
Related
After succesful upgrading to WM2005, I tried to install the 2 arabic files extracted from EXT ROM (which I think are responsible for Arabizing) "Default_AACERT_arabizer.CAB" and "Default_ACERT2_arabizer.CAB". After installation and softresetting, the device acts wierdly, and.... There is NO Possible Way to get it running again without getting into "Bootloader Mode". Did any one manage to do that? and I couldn't get into the xetended ROM of WM2005....did any one succeed?
you cannot use any existing localization packs on WM5
well it workedfor me on himalaya
http://forum.xda-developers.com/viewtopic.php?p=160111#160111
Dear friends,
I tried my self also...but all in vein....that was 1st reason to downgrade to Win2003 SE...
I wrote an email to imaginet one month ago, they replied " we are trying hard to upgrade and soon you will have an upgrade"...I don’t know what it means by soon...months or years???????????....since they never upgrade after 2003... :twisted: :evil:
i will attach 2 options for arabizing... people managed to get them working... i didnt know however (still new at these things) so if are able to enable any of them please tell me how
file 2 (updated arabizer ripped from jasjar) i even tried installing the first then updating with this...
i tried everything
i cant seem to get it to work, while others have and are not willing to show me the way
i cant upload it cause its too big even after partitioning
so i will try from a different place cause i cant use ftp here
mebonkers said:
file 2 (updated arabizer ripped from jasjar) i even tried installing the first then updating with this...
i tried everything
i cant seem to get it to work, while others have and are not willing to show me the way
i cant upload it cause its too big even after partitioning
so i will try from a different place cause i cant use ftp here
Click to expand...
Click to collapse
mebonkers
Check this link. There's a detailed explanation on how to do it. However, some claim that it didn't work for them. Good luck.
http://www.ce4arab.com/vb7/showthread.php?t=41334
did that
still nothing :?
mebonkers said:
did that
still nothing :?
Click to expand...
Click to collapse
Can you explain what is "nothing"? I did it my self last night and it worked. The only drawback is there is no Arabic keyboard. However, they clain that if install that dictionary..it works. I'll have to try it.
Arabizing is possible with wm5 and blue angel
I can arabize my xda iis with the following programs in wm5 (maimach patched rom) if you use the standard rom it locks the blue angel...you must extract this paste the nb file to ph20b if you have xda iis, if u have a siemens it is the other folder..reflash the rom:
imaginet Dictionary working
Imaginet reader working
Arabizer 1.3 working and stable
sidenote:
imaginet handwriting reader working well in 2003se. Works in 2005 however when the mobile goes into standby mode if unused say for 5 minutes pressing the power button will not open the blacklight, only a reset resolves this. In the end this is the only one i have not got working yet.
Finally, make backups every step of way with a program like sunnysoft 3.3 or above, unlike sprite this is compatable with wm5.
Dear friends, I am still trying to install properly arabizer on wm05.
I couldn’t install Arabic –English dictionary and prayer timings.
If you install above mentioned files without AR-Eng dictionary, Arabic key board will not install, but if you get file from following link, named “United Arabic Cab.rar, its worked fine for me and I was able to get Arabic key board without installing ar-eng dictionary. hoping it will be helpfull for you.
http://forum.xda-developers.com/viewtopic.php?t=29156&postdays=0&postorder=asc&start=25
Reading the WIKI, I learned that this problem has already happened before with other HTC phones and RUU - Cooking tools
The basic problem could be related to the "language" setting in Windows Control Panel's "Regional Settings". This has happened with other Kitchens before
I suggest new users to try on any english PC or temporarily change Windows' "regional settings" to UK or USA
Hope this helps to aleviate this forum's recent FAQ load
.
i think it can also be because windows does not instal qualcomm cdma driver in this case reinstalling activesync can solve the problem
im running a norwegian os, and have never encountered this, but I dont say its not a cause to some ppl's issues .
But hopefully someone experiencing this can test this for us.
My solution
I had also a lot of problems with HARD-SPL. My simple solution: remove your SD Card during the process. After finishing Hard-SPL put the Card back and flash your ROM. I think the easiest way to flash is the SD Card methode.
I have tried many methods posted on this website, i am currently using a romeos rom 6.1 1.971.....it is getting very frustrating now, all i am trying to use this program for is Gremote......any suggestions would be greatly appreciated and i tried to install Microsoft NET CF 3.5 on touch pro it tells me i need more storage space and a support number 3....ANYONE PLEASE HELP MEE
I have renamed mscoree.dll to various things including mscoree.backup.dll and mscoree.dll.txt same issues, still cannot install this program, is there way around it so i can still install and work the gremote?
I've had this problem with romeos also and i searched through whole xda and i found this:
1. You should shut down manila.
2. Then soft reset.
3. Uninstall your old net. 3.5 if possible (program/remove under system settings)
4. Start a regeditor and delete in the registry this map: HKLM/Software/microsoft/.NETCompactFramework
5. Soft reset again and try installing net 3.5 again.
If it doesn't work repeat al this again and sometimes you have to try installing it twice times, and soft reset some more again and then remove again the registry stuff. and try install it again and again. It worked with me.
Hope it helps
sorry im a newbei i dont know how to shut down manila, how would i be able to do that, and where can i find a regeditor...thanks alot
Hey i got it!!!!!!!!!!!! THANKS A BUNCH
well i got it to install that was about it i couldnt really function it or where to fin dit on my touch pro, i then installed g remote that wouldnt work ...oh well i give up spent way too much time on this peice of s*&*^
I installed the .net on my touch pro and the only way you can tell if it is installed is if you go to start-settings-system-remove programs. There is a list of everything you have installed. From there you should be able to run programs that need the compact framework in order to work.
I've just noticed a very strange thing...I've flashed an original T-mobile rom on my MDA Vario III, and after installing it, I've just tried to run q3ce and it can run, without installing any d3d driver.Slow and unstable. I thought, that maybe its a kind of ghost-effect, so I reflashed the original shipped rom, and did the hole procedure with hard resetting few times, and after that reinstalled the last romeos 6.1 rom, and the ghost effect is still there. The problem is, that I cant intsall any d3d driver...ok, I can, but with no effect, I cant run the test programs given with the HTC-CA drivers. Could someone help me how to fix this??
Thanks
Hi, if anyone could please help me i would be gratefull, i recently purchased a D2 but its already preloaded with WM6.5 rom version 2.53.405.5 (76952)WWE, But i really wanted WM6.1 as, among other things, i wanted to use the handwriting rec.
does anyone know what stock rom to reload? and where i can get it? sorry to ask such a basic question.
thanks in advance,
http://www.htc.com/europe/SupportDownload.aspx?p_id=249&cat=2&dl_id=613
thanks for that, however it seems to have just bricked the phone
thanks for that, however it seems to have just bricked the phone
it seemed to work, all the correct messages displayed
but......
now all that happens is it turns on, shows the touch diamond2 screen, then resets
it has the following text in red in the lower left hand corner
r 3 . 43. 25 .19
g 61. 20t. 25. 10U
d 1. 39. 47382
does any one have any ideas?
Try to hard reset.
tried that before i posted
and a soft reset, and another hard reset to be sure,
i searched the forum but couldn't find any reference to that type of error either.
any ideas on how to retrieve it from paperweight mode?
Download stock ROM for your region
Unpack it with WinRar or TotalCMD
Rename RUU_signed.nbh to topaimg.nbh
Copy topaimg.nbh on your SD card
Enter bootloader (hold volume down and turn on phone) and follow instructions
edit:I guess for wm 6.1 you need lower version of SSPL
thanks dude, i used the bootloader to reinstall the latest rom from HTC.
Topaz_S2_HTC_WWE_2.53.405.5_Radio_Signed_Topaz_61.44etc.25.35_4.49.25.91_Ship
my phone is no longer a brick however i am back to square 1 in that i still have wm6.5, and i want 6.1
ive tried to reflash with the older rom fighter7139 suggested
RUU_Topaz_HTC_WWE_1.39.405.3_Radio_Signed_Topaz_61.20t.25.10_3.43.25.19_Ship
but it gives me the same rebooting error.
any ideas why wont the older rom work on my phone? or if theres an alternative to that rom ?
thanks
I've loaded hardspl 1.83 and extracted the file RUU_signed.nbh and renamed it to topaimg.nbhand,
i moved it to the SD card, reflashed the phone with the 6.1 rom,
but i get the same error.
any idea on what rom i should use to update from?
or what stock spl i'd need to run this rom's version of 6.1 ?
a thought
maybe i don't even need 6.1, all i want to do is to fix two things -
1) make the sms messaging work like on the old htc devices ie diamond or tytn ie not use htc messaging
2) add handwriting recognition
- would also be nice to have the taskmanger icon, the battery icon and the original windows start menu back too, but im not dependent on them....
so i guess any rom would do that allows these functions, any help or info on this would be much appriciated
terminalkhaos said:
1) make the sms messaging work like on the old htc devices ie diamond or tytn ie not use htc messaging
Click to expand...
Click to collapse
Try http://forum.xda-developers.com/showpost.php?p=3771519&postcount=2991
2) add handwriting recognition
Click to expand...
Click to collapse
http://www.htc.com/www/SupportDownload.aspx?p_id=249&cat=0&dl_id=824
thanks for that, however that was the first thing i tried, i saw the download for the handwriting ap just after i got the phone, not knowing it didnt have it when i swapped from my diamond,
the thing is the update only works on certian AP version control builds -
the message on the site is -
Note: AP version control -> The criterion will pass if the Touch Input for Pocket is equal to Version 2.1 (Build1919.1320), or lower.
mines a higer version, which i assumed originally had to do with it being wm6.5 not 6.1,
- i have tried downloading and installing anyway but it wont load.
does anyone know how to get this update to load, or how to change the AP version control back to a lower version ?????
any help would be much appriciated.
if it matters,
i'm running Duttys HG, and ive flashed to hardspl,
i don't mind flashing back to whatever, i just really need the handwriting app
The handwriting SIP is likey hidden.
There is a reg edit to unhide, just search SIP Reg Edit and you should find it.
If I recall it was under the WM general tweaks.
thanks for that, i got the letter and block rec working, but still not the transcriber the reg key shows it should be showing, but i think the actual file may not be there,
fixed after changing the reg, and downloading the update, you then need this transcriber cab
http://forum.xda-developers.com/showpost.php?p=3661845&postcount=47732
result
Any luck finding a way to get 6.1 working on this phone? I just bought the Pure from AT&T as a replacement for my LG Incite that had 6.1 on it. So far I can't stand 6.5 at all. My main beef is with IE, I really like the one on my Incite vs. this one. And my other problem is with the start menu, I also prefer the drop-down style in 6.1.
Thanks for any replies or help.
TheNorthSideWhiteGuy said:
Any luck finding a way to get 6.1 working on this phone? I just bought the Pure from AT&T as a replacement for my LG Incite that had 6.1 on it. So far I can't stand 6.5 at all. My main beef is with IE, I really like the one on my Incite vs. this one. And my other problem is with the start menu, I also prefer the drop-down style in 6.1.
Thanks for any replies or help.
Click to expand...
Click to collapse
Start here.
Once you unlock your phone, you can flash to anything you want.
6.5 is hands down better than 6.1, there are 6.5.219xx builds that have the drop down start menu.
Thanks Bruce!
For some reason I couldn't find a good Pure forum, so that link helps a lot.