I have on my trinity the white screen problem. it seems like your bootloader makessome bad bloks and this causes the white screen as on the tytn.
Can you do somethig to fix it?
Thanks
same problem here but i don't think it comes from olipro Hard SPL.
I've already send a pm to olipro and post a question on the hard spl topic, but no answers for the moment
Related
Hey Guys.....i was referred to this website by the HTC customer care......
I am in serious trouble.....
I bought this new tilt which had the At&t rom and worked really great.....Dont know what got into me.....I read a lot about custom roms and I installed Duttys official WM 6.1 after installing the Flash Hard SPL......It was perfect except the phone call function wasnt working any more.....I mean when I called my home number....i got the ring, but when the phone is picked up i couldnt hear anything nor did anybody on the other side.....I tried this many times on different numbers....
Realizing the mistake I downloaded the latest tilt rom from the HTC website and installed it......The phone restarted fine....screen alignment.....showed the today screen and then it goes through all the AT&T customization......The phone restarts after the customization.....shows the AT&T initial screen and then the 3G animation......after that it goes to a very dim dark blue blank screen.......the phone is on...the key lights turns on when clicked.....but the today screen doesnt boot up......This is were I am rite now.....stuck with this blank dark blue screen......The phone goes to standby more after about 1 min I guess.....and when the phone is waken up from the standby mode I see a screen with a mixed color screen.....I am not talking about the red blue green boot loader screen....this is colors all over the screen.....each pixel is different color.
I dont know what to do.....
Please if anyone can give me some advice and help me out......
Thank you so much in advance.....
did u hard reset after flashing?
blessanjoseph said:
Hey Guys.....i was referred to this website by the HTC customer care......
I am in serious trouble.....
I bought this new tilt which had the At&t rom and worked really great.....Dont know what got into me.....I read a lot about custom roms and I installed Duttys official WM 6.1 after installing the Flash Hard SPL......It was perfect except the phone call function wasnt working any more.....I mean when I called my home number....i got the ring, but when the phone is picked up i couldnt hear anything nor did anybody on the other side.....I tried this many times on different numbers....
Realizing the mistake I downloaded the latest tilt rom from the HTC website and installed it......The phone restarted fine....screen alignment.....showed the today screen and then it goes through all the AT&T customization......The phone restarts after the customization.....shows the AT&T initial screen and then the 3G animation......after that it goes to a very dim dark blue blank screen.......the phone is on...the key lights turns on when clicked.....but the today screen doesnt boot up......This is were I am rite now.....stuck with this blank dark blue screen......The phone goes to standby more after about 1 min I guess.....and when the phone is waken up from the standby mode I see a screen with a mixed color screen.....I am not talking about the red blue green boot loader screen....this is colors all over the screen.....each pixel is different color.
I dont know what to do.....
Please if anyone can give me some advice and help me out......
Thank you so much in advance.....
Click to expand...
Click to collapse
ummm what happens when you do a hard reset?
To perform a hard reset place two fingers, one of the left softkey and one on the right, and insert the stylus into the reset hole to the right of the usb port.
let the phone reboot and tell me what happens.
blessanjoseph said:
Hey Guys.....i was referred to this website by the HTC customer care......
Click to expand...
Click to collapse
HaHa thats too funny they referred you to xda maybe they can keep up with all the complaints because I cannot.
anyhow tell us what happens after hard reset
lol........i find that amusing too,
your issue sounds like a radio problem.......
when you boot up your device, tell us what number is next to the red R
XtreMe_G said:
lol........i find that amusing too,
your issue sounds like a radio problem.......
when you boot up your device, tell us what number is next to the red R
Click to expand...
Click to collapse
shouldn't be a radio issue if he downloaded the latest tilt rom from htc website because a radio is attached with that rom.
Sorry....forgot to mention that.....I did do hard reset by holding down the soft keys and by inserting the stylus......It goes through the entire cycle of reloading....today screen....customization and finally I end up with the blank screen I talked about before which comes right after the windows screen at the startup.....
blessanjoseph said:
Sorry....forgot to mention that.....I did do hard reset by holding down the soft keys and by inserting the stylus......It goes through the entire cycle of reloading....today screen....customization and finally I end up with the blank screen I talked about before which comes right after the windows screen at the startup.....
Click to expand...
Click to collapse
after you inserted the stylus while holding down the two softkeys "calender" "contacts", did the device inform you to hit the "send" key on two occasions?
yea, i noticed that......but what he described is what happens when you have an incompatible radio.....
the only thing i can think of is......the radio from hell.....
XtreMe_G said:
yea, i noticed that......but what he described is what happens when you have an incompatible radio.....
the only thing i can think of is......the radio from hell.....
Click to expand...
Click to collapse
good call but did dutty ever put it with one of his roms? He wouldn't be that mean
maybe he can tell us what it says when it boots up...the R G D numbers..since he probably cant go to start and device info for us
R 1.65.17.10
G 25.83.40.02H
D 1.62.00.00
This is what I see at the startup....at the bottom of the screen with a At&t background.....
lol...... good call mate.
blessanjoseph said:
R 1.65.17.10
G 25.83.40.02H
D 1.62.00.00
This is what I see at the startup....at the bottom of the screen with a At&t background.....
Click to expand...
Click to collapse
Here read this thread. Hopefully you can figure it out. Like XtreMe_G stated you got the radio from hell. You must of installed it before dutty's rom.
http://forum.xda-developers.com/showthread.php?t=393337
woot!!! i pwns
XtreMe_G said:
woot!!! i pwns
Click to expand...
Click to collapse
hell ya you do. I should go rick roll myself now.
Yes I did press the send key twice....Once to confirm the reset and second one to restart the device.....I just now did it once again to be sure and still in the same page.
Ends up with a blank screen....goes to stand by....when waken up gives me a mixed color screen.....looks like somebody used different color spray paint on my lcd screen....
blessanjoseph said:
Yes I did press the send key twice....Once to confirm the reset and second one to restart the device.....I just now did it once again to be sure and still in the same page.
Ends up with a blank screen....goes to stand by....when waken up gives me a mixed color screen.....looks like somebody used different color spray paint on my lcd screen....
Click to expand...
Click to collapse
well you installed the radio from hell before you installed dutty's rom thats why you couldn't hear anything.
Now you need to remove it or find a compatible rom.
So read this thread
http://forum.xda-developers.com/showthread.php?t=393337
good luck.
THanku.....THanku.....THanku.....THanku.....
Ohhhh.....thank you all.....for your time effort and all the advice and information.....
The last thing the HTC customer care representative told me was that ill have to send in the device to fix it up.....
I followed exactly like it said in the link and Hurray.......my phone is alive......
Thanku all once again.....
The best forum ever....
Guys did i have that phone call problem because of the hard SPL or Duttys Official WM6.1. If it was because i installed the hardspl first, can I go back to Duttys Official WM6.1 without any future problems by just flashing the ROM with duttys WM straight skipping the hardspl step..
I really liked that version....but wud like to make phone calls obviously....I know the mistake is from my part....screwed up somewere....cause I see so many ppl using custom roms without any problems...
Please tell me what could be the best solution....
Thanks a lot...
Hi All,
Sorry to ask for help like this, as I had tried reading through, but I really got more and more confused.
I got only next 2 days to give my diamond a last try.
Till now I still can't truely understand what is Hard SPL, I tot all Diamond should have.
If I wanted to try the following combination (like what Bro Radeon has), how to do it in the right sequence and step by step, I tried and stopped at 0% and error 262,
SPL - OliNex 1.40 Developer Edition
ROM - SwiftBL WWE Diamond ROM v4.0 (1.93.405.1)
Radio - 1.00.25.05
After flashing, if things goes through, how I revert back to original factory default, so that warranty and resale is not a problem.
Infor about my device is as follows,
Red Screen:
DIAM100 64M
SPL-1.35.0000
MicroP-Diam (LED) v11
Green Screen:
PSOC-Diam STAGE_PVT v0.x30
Blue Screen:
White Screen:
Serial
Device Information
ROM version: 1.35.871.5 WWE
ROM date: 06/06/08
Radio Version: 0.93.25.NS26
Protocol version: 52.26.25.09W
Desperately looking for help, sorry for being so novice about flashing, kindly of phobia, perhaps is generation gap I supposed.
Ke Pin.
SMS turns blank
Hi All,
I had to do a Hard Reset after my sms hanged up on me.
The screen turns blank whenever I need to compose new msg or reply.
When it is in blank screen, when I click on Menu, it says, can't encrypt or something.
Has anyone encouter such a problem.
Diamond has many nice things like, the best screen which I have seen so far and the best design, but battery and the hang ups are just too inhibiting to enjoy this unit.
I reluctantly contacted ppl who wish to trade their Omnia with my diamond, really can't bear to part ... Help help
check this modmydiamond.com. It has some guides as what to do and how to do it. It also links you back to the correct threads in this site.
Goodluck
its modmydiamond.info ....
kepin said:
Hi All,
I had to do a Hard Reset after my sms hanged up on me.
The screen turns blank whenever I need to compose new msg or reply.
When it is in blank screen, when I click on Menu, it says, can't encrypt or something.
Has anyone encouter such a problem.
Diamond has many nice things like, the best screen which I have seen so far and the best design, but battery and the hang ups are just too inhibiting to enjoy this unit.
I reluctantly contacted ppl who wish to trade their Omnia with my diamond, really can't bear to part ... Help help
Click to expand...
Click to collapse
those are pretty serious issues.. your diamond shouldn't be going blank.. have you tried returning it for a new set? and yeah, you should be able to follow the guides on my site if you want instructions.
Anyone able to assist.
After my compact froze I did a soft reset only to see it hang on the T-Mobile splash screen (white background, pink dots). The ROM details do not even appear in the bottom right hand corner.
I have upgraded my ROM with Hard-SPL, a Radio ROM and Dutty's 1.8 ROM but that was weeks ago.
Any assistance?
AS an update, not even a Hard-Reset sorts it out.
Cannot see how the new ROM would be causing the problem as it has worked for a few weeks.
Luckily followed all the instructions and have 1.40 Olinex Hard-SPL on the phone. Just need to wait for home so I can plug it into my laptop. What I do from that point on will be the subject of a further search of this board later.
I have HyperDragon III ROM (the 1st rom I installed after buying MDA Vario III), radio 1.71.09.01. Sometimes touch screen works perfectly, no matter if I use stylus or finger. However, sometimes it reacts too slow (2-10 seconds delay) and needs harder pressure.
Above is valid for keyboard, sometimes it reacts light fast, but sometimes I had to keep button pushed for 1-2 seconds to make letter appear on screen.
I had this problem with default T-mobile ROM with 1.65.24.36 radio, also with HyperDragonIII with 1.65.24.36 radio.
I know how to change ROM and Radio. However, I never played with SPL. I think guy who sold me the phone changed HardSPL (obviously, since I can change ROMs).
Can wrong HardSPL make described problems? Is there a combination that will make Kaiser extra stable?
It's frustrating when I need 5 minutes to write a SMS, while guy next to me finish it in 10 seconds with his Nokia N70 (4X cheaper).
I found out this regarding SPL version:
Kais130 MFG
SPL-1.0.Olipof
CPLD-8
To simplify my question: Will change of the SPL solve my problem. If it's not related to my problem, I would rather not touch it.
Thanks all
Probably.
HD III is a WM6.1 ROM. For the best results with the 6.1 ROM's you should be using the 3.* versions of Hard SPL.
Follow the instrucitons in Post #2 of the thread and away you go: http://forum.xda-developers.com/showthread.php?t=396922
Ta
Dave
Check the fifth sticky in the kaiser rom development for changing your spl, I'd be willing to bet thats your problem. Also check the rom thread to see which spl the author recommends using for his/her respective rom.
Welcome to xda, in the future please try to search/browse (this is a problem that has been discussed many times before) and #2 post questions in an existing thread (in your case the hyperdragon thread)
Works significantly better with 3.29. Sorry for my dumb post, I am reading this forum for months (although it's my first post). SPL themes sounds too complicated to me so I didn't want to touch (until I am 100% sure that would help).
Specs
Rom Version
HD_IV_IOLITEWWE
ROM date
09-30-08
Radio
1.65.24.36
Service provider
Tmobile usa
Issues:
Camera is blurry and slow,
the touch screen often locks up for a few seconds which is a hssle trying to touch in a number,
during phone calls the other person other line hears my voice go real low, I just push a button so black light goes back on on the phone and they can hear me again.
No sure what to do
Thanks
First of all, you should post in the appropriate thread. i.e. the same thread where you downloaded the rom at and secondly, did you try and do a hard reset?
I used 2 different roms and issue got a bit better with lag on the dragon rom but still not fixed, wasn't sure if it was the rom to begin with. Yes I just did a hard reset and still issues
change your SPL...
i would guess that you did not completely read the kaiser wiki (first link in my signature) or the noob ROM flashing guide (created by mskip) or the HyperDragon FAQs (created and maintained by mskip)...
seeing as how you've mentioned all the details about your phone EXCEPT the SPL version, i imagine you don't know the importance of matching your SPL version with your ROM
strange radio behavior, laggy camera, and screen unresponsiveness are ALL CLASSIC signs of a mismatched SPL (you are experiencing all three)
see my signature for the link to cmonex HardSPL 3.29 (recommended by SJ, the creator of the HyperDragon ROMs) and read the instructions thoroughly. also, i would suggest reading the topics mentioned in the first sentence of this post in exactly that order to fill in the rest of the gaps and most other possible issues you might encounter
good luck!