Which rom is the best? - 8125, K-JAM, P4300, MDA Vario Software Upgrading

Ok guys - since my Molski.biz 2.26.10.2 rom has a few bugs (like the volume-control slider not working), I decided to reinstall a new rom. Ive seen already tons of threads including thousands of posts so it`s difficult to find out which rom is the best.
I heard of Faria released a cooked WM6-Rom but I m not sure if it`s working fine with the wizard and if there are still some bugs. In addition to that i don`t know if there are any incompatabilites with WM5 applications.
I`ve also seen a WM5 Rom tons auf WM5 Roms - but which one is working realy fine?
Oh forgot that: I`ve a G4 Device but it`s already CID unlocked.

What ever suites for YOU.
For me WM5 was a disaster, crashed every day. Now with WM6 X-plore 1, not a single crash during 4 months! Next thing I'm going to try is Titanium 2 I guess.

Well, I don`t want a Rom with tons of Tools, but it should have a nice look (like WM6),a good performance and most important not too much bugs .

Then I would try X-plore 2.0n or wait for Titanium release

Try T-Mobile USA 2.26 ROM(you can flash extROM blank if you don't like soft in extROM).It's WM5 ROM but so stable,fast.None WM6 ROM have no bug.

Saiyajin said:
Well, I don`t want a Rom with tons of Tools, but it should have a nice look (like WM6),a good performance and most important not too much bugs .
Click to expand...
Click to collapse
try the ingenetics rom, as ms built it with nothing added

I found the nk.nbf file in your RapidShare, and it says to insert it into any ROM to install the vanilla WM6. I have a CID Locked Wizard. Would it be possible to insert that file into Cingulars default ROM and flash it to my phone without CID unlocking, or would I brick my phone?

drumguy211 said:
I found the nk.nbf file in your RapidShare, and it says to insert it into any ROM to install the vanilla WM6. I have a CID Locked Wizard. Would it be possible to insert that file into Cingulars default ROM and flash it to my phone without CID unlocking, or would I brick my phone?
Click to expand...
Click to collapse
NO, and yes,
you can't do the former and you may end up doing the latter.
afaik the ruu is just a small prog to tell the phone to flash the nk file in the same folder that the ruu is in. if the nk file is wrong, it won't flash.
anyway, in the time it's taken for me to reply you've probably unlocked anyway?

Related

Whats the best ROM at the moment?

Ive got a MDA Vario on T-Mobile UK and last night updated the ROM to the KJAM WWE 216901 ROM...
got to say it runs really well on the device... but the question is... is this the most up to date and/or best rom for the device...
cheers! :wink:
rabmc said:
Ive got a MDA Vario on T-Mobile UK and last night updated the ROM to the KJAM WWE 216901 ROM...
got to say it runs really well on the device... but the question is... is this the most up to date and/or best rom for the device...
cheers! :wink:
Click to expand...
Click to collapse
i think so yes. i'm using it on a k-jam and is very happy with it, for mainly 3 reasons:
- All activesync problems vanished
- Battery life is noticeably longer
- It seems a lot faster
. It seems more stable (fewer soft resets and no hard resets since it came out)
oops thats 4
Where can i get the software to update the Rom to KJAM WWE
Ive got a MDA Vario on T-Mobile UK and how can i updated the ROM to the KJAM WWE 216901 ROM...
Where can i get the software ?
Thank you :?
Here is what I did today.....
You need to download lokiwiz and the ROM from these forums...... do a search and you will find the quick quickly.....
#unlock phone
with no SIM card in phone
copy EnableRapi.cab to phone
run EnableRapi.cab from phone
run lokiwiz.bat from PC
select option 'U' Unlock SIM
phone reboots
add SIM to backout bin file names on PC
run lokiwiz.bat from PC
select option 'C' unlock CID
phone reboots
add CID to backout bin file names on PC
#install new ROM
uncomress ROM file from zip
click ROM install file
follow instruction
takes 10 minutes
phone reboots
i think there is a simple way to do it ....
just download awizard from this site
enable rapi and cid and that;s all
start upgradte your rom
Re: i think there is a sipmle way to do it ....
pilpel said:
just download awizard from this site
enable rapi and cid and that;s all
start upgradte your rom
Click to expand...
Click to collapse
yup that's the process I used to change my Rom
Are you talking about this ExtROM found from xda ftp?
I couldnt find other ROMs with same version...
/Wizard/Extended_Roms/K-JAM_WWE_216901_2169101_020710_ship_ExtRom.zip / 4510 KB / 3.3.2006 / 3:16:00

A helping hand needed to upgrade my MDA Vario!

Hello guys!
I got my MDA Vario last week, and I am very much impressed with it!
I got the MDA Vario brand new without a contract and my intention is to use it with one of those O2 Genie PAYG SIM cards. So.... after much reading this excellent forum I figured out that I would need to unlock the SIMlock on the Vario. Got hold of the Lokiwiz utility, followed the advice on these forums, and tested it with the Orange SIM in my regular phone, and hey presto.... MY PY PHONE IS UNLOCKED!
Next step - to remove all T-Mobile customisations. Again, I had a simple bit of advice from one of you good folk - hard reset, then soft reset when the phone starts to install customisations and now all the pink girlie stuff has gone! Only reminant of T-Mobile left on the phone is the logo on the phone dial keypad.
My thoughts are now with upgrading the ROM. T-Mobile have been very slow with updating their ROM package -a new one is apparently due very soon. Now.... in preparation of installing a new ROM, Ive CID unlocked my phone. I would really like to know which ROM I should upgrade to - there are so many out there! As the phone has been CID & Sim Unlocked, does the phone remained unlocked irrespective of what ROM I install? Can I install a T-Mobile ROM after changing it to another?
As I intend to mostly use an O2 PAYG SIM in it, would it be better to use a new 02 update? If so, which one? Or do I go for another ROM? All very confusing! Finally, Ive heard that I cannot browse the net via GPRS on an 02 PAYG SIM. Is that true? Do I need to flash an ExtROM too?
I know Im asking a lot here and am being a bit of a pain in the backside, but I would really appreciate any and as much advice as possible as I realy dont want to end up with a dead phone! Many thanks in advance!
Hi, yes you could wait for the new rom and i am a believer in sticking with your manufacturer roms because many of the posts here seem to people experimenting with different roms and it all going wrong - lol.
But if you do upgrade proberly the commonest choice is the aku2 qtek rom that i use
download here ftp://xda:[email protected]/Wi...digy_2170702_21707102_20710_QTEK_WWE_Ship.exe
and the o2 aku2rom not a bad idea too, but without the o2 extras.
Yes you could then upgrade to the t-mobile rom then but often you need to unlock again with lockiwiz 0.3a.
PAYG o2 will browse internet but msn etc.. does not work.
btw yes you are a pain in the arse but then most people here are!! :lol:
Cheers Mark! Nice to have some basic advice - very reassuring for a thicko newbie like me!
Well... I couldnt wait for the new T-Mobile ROM and went ahead with the upgrade with the Qtek upgrade you suggested.
Was a little tricky at first because the upgrade wouldnt happen (port failing to open) but I had a few programs running in the background on my desktop PC and shut them all down so that I had a `Clean` PC. The upgrade process was then as smooth as a babys bottom.
MDA Vario is running really well - well worth the upgrade IMO. Everything seems quicker and generally better. Only problem I have is with wifi - it seems to take ages to make a connection with my PC (ad-hoc peer to peer) whereas on the original T-Mob ROM it was very quick. Any ideas here?
I read that you say I would need Lokiwiz 0.3a to install the AKU2 T-Mob ROM when it is eventually released. I was under the impression that once the PDA was unlocked (lokiwiz 0.2b) I wouldnt need to unlock it again. Is it different with the very latest T-Mob ROM? Can I not revert (downgrade) to the original T-Mob and then upgrade to the new T-Mob ROM? Ive not heard of lokiwiz 0.3a being out yet - would it be as simple as unlocking with lokiwiz 0.2b?
Finally, how on earth do I get the latest 02 ROM? I need to enter my 02 mobile number and IMEI to download it. Do I need lokiwiz 0.3a to install that or any other current ROM?
Cheers for your friendly advice.
Al.
Hi, no problem - glad to help.
Lokiwiz 0.3a is out see here http://forum.xda-developers.com/viewtopic.php?t=50768
For some reason when upgrading (in think it renews cid/spl) to aku2 rom seems to lock again - i had to unlock my qtek with above tool.
Yes you can go back to original rom - but if does not work use farias method of unlocking and downgrading rom (post is in this forum)
Most of the roms are in the wiki http://wiki.xda-developers.com/index.php?pagename=Wizard_Upgrades
including the o2 roms, but i would refrain from too much chopping and changing because you can destory the bootloader and then has to go back to the manufacturer.
Many reported problems with the wifi setting up - i would read some of the threads in the wizard forum if i was you. First thing to try is tweak wifi on device to wlan g and it may work better.
see registry tweaks here http://wiki.xda-developers.com/index.php?pagename=Wizard_Upgrades
btw good to hang out in the wizard forum too - you will learn alot of tips from there.
Want to also say thanks from another newebie with T-Mobile MDA. Have unlocked phone and CID and flashed with 2.17 QTEK ROM and all is good.
Thanks !!!
if you want th get rid of the tmobile crap on the face...use a 2p coin and move it downwards...not accross
it takes the tmobile paint etc off without any marks..
Jesus sbouri that logo was killing me, brilliant tip, nice one mate!!!
hi
i just got my mda vario and manage to unlocked the phone with lokiwiz03. i know my phone is now sim unlocked, but how do i check if it is cid unlock as well?
i am eager to flash the rom with the qtek version but i have no idea how to do it.
i know i must have my phone cid unlock in order to install a different rom, so do i just download the latest qtek rom, connect my device to usb and activesync it, and then just run the RUU?
i am really noob here.
cheers.
Hi mate if i was you i would use MR CLEANS ROM i flashed with that and its excellent, tottaly clean with no tmobile crap and i didnt do anything with the cid so dont worry.
ftp://xda:[email protected]/Uploads/Wizard/ROMS/MrClean_RUU_WIZARD_224_AKU23_WWE.zip
Just download this and run follow instructions, real easy. Good luck mate.
thanks for the advice...i took a bold move and flash it with a qtek rom. works like a charm. before that i did cid unlock using lokiwiz02a, not lokiwiz03.
i will take a look at mr.clean rom at a later stage.
i notice that my imei number is different from the one in my box. does flashing the rom change it?
now my next task would be update to a better radio rom and check out the extension rom.
cheers.
SBouri said:
if you want th get rid of the tmobile crap on the face...use a 2p coin and move it downwards...not accross
it takes the tmobile paint etc off without any marks..
Click to expand...
Click to collapse
Great tip, worked like a charm and left no marks.
Thanks.
Hi there, I'm about to flash my UK MDA Vario too.
I'm not sure to use the Mr clean one or the Qtek 2.17 version.
Before I do anything, which is better of the two?
Also, what settings to I need backed up? I have my txt msg service numbers, as well as voicemail. And all of my MMS & GPRS settings.
Am I to assume that all I have to do is input the settings into the device once it's been flashed?
Thanks
Scottland said:
Hi there, I'm about to flash my UK MDA Vario too.
I'm not sure to use the Mr clean one or the Qtek 2.17 version.
Before I do anything, which is better of the two?
Also, what settings to I need backed up? I have my txt msg service numbers, as well as voicemail. And all of my MMS & GPRS settings.
Am I to assume that all I have to do is input the settings into the device once it's been flashed?
Thanks
Click to expand...
Click to collapse
The mr clean rom is a more advanced rom and has no extras. The qtek official rom is probably a safer install because its an official rom and many good reports of success and users pleased with the outcome.
Yes when you have flashed just input all those settings again.
Plus you can backup your voice tag database between hard resets by copying the file CommandModel1.bin found under the windows folder to your pc or to the memory card. After rom upgrade copy it back to your windows folder and all your voice tags are back!
Create backup of windows\start menu - most programs that are on the storage card dont need a reinstall.
Create copy of pim.vol in the root directory of the device - contains contact and appt information. After flash change the new pim.vol to pim.vo and copy and paste old pim.vol (use total commander or gsfinder file explorers for this) and soft reset and you will have info back.
Create backup of windows\favorites - for all your internet favorites.
That will make restore a bit quicker than otherwise.
Cheers for the info. I was actually thinking of trying the Mr. Clean one first, is there anything missing from this one, or is it just less stable?
Mr clean is just a clean rom without any of the manufacturers addons. It will probably run very well - its the flashing process with it that may not be as safe as an original rom and may possibly destroy your bootloader etc.. so you have a brick phone. I would always go for the safest option and would not suggest chopping and changing roms. Read the many users stories where everything goes wrong and the forum needs to help them out.
meschle said:
Mr clean is just a clean rom without any of the manufacturers addons. It will probably run very well - its the flashing process with it that may not be as safe as an original rom and may possibly destroy your bootloader etc.. so you have a brick phone. I would always go for the safest option and would not suggest chopping and changing roms. Read the many users stories where everything goes wrong and the forum needs to help them out.
Click to expand...
Click to collapse
True, I didn't think about that. Thanks again.
Ive been using Mr clean rom for 1 week now and its excellent from my experience. Its tottaly clean and runs so fast!
By clean i mean it has no customizations as you will find on official roms. It flashed just like any other rom too. Easy as pie. Just my info as people would like to know.
I've just upped to the QTEK ROM, and I've a couple of problems, nothing too serious though I don't think?
Firstly, when making my GRPS connection - I can't seem to find anywhere to input the WAP Proxy settings?
Edit, sorted this one now
Secondly, when settinp up my MMS - I can't select connect via Picture Message in the settings, it's not there?
I'm guessing this is some other connection I have to make up?
Any idea guys?
Scottland said:
I've just upped to the QTEK ROM, and I've a couple of problems, nothing too serious though I don't think?
Firstly, when making my GRPS connection - I can't seem to find anywhere to input the WAP Proxy settings?
Edit, sorted this one now
Secondly, when settinp up my MMS - I can't select connect via Picture Message in the settings, it's not there?
I'm guessing this is some other connection I have to make up?
Any idea guys?
Click to expand...
Click to collapse
I cant find what you say under settings - what does it do?
Never mind ignore me, that'll teach me not to read T-Mobile's site correctly

Help Help! :(

How do you "Relocate the Temporary Internet Files, History, and Cookies locations to the Storage Card to save precious main storage memory"?
MsHap said:
How do you "Relocate the Temporary Internet Files, History, and Cookies locations to the Storage Card to save precious main storage memory"?
Click to expand...
Click to collapse
Care to tell us what device you have, what your OS is, what ROM you are running, etc? Things work differently on different roms, etc...
T-Mobile MDA (USA)
MODEL No: WIZA200
windows mobile version 5 OS 5.1.70 (build 14410.1.1.3)
ROM version 1.8.10.2 WWE
Easiest thing for you is to go get a copy of Registry Wizard (search around here for the link. Sorry, I don't have a link handy) and install that. It gives you an easy way to change these values (as I recall).
Thank You
Hey, I did that hack to show the extended_rom2 thing.
First, can I save the cookies and stuff there?
Second, I am having the camera issue like everyone else.
Do you think it is due to the fact that the camera sees extended_rom2 as a storage card and can only use one so since E comes before S it picks extended_rom2?
Then if that is true, what do I do?
MsHap said:
Hey, I did that hack to show the extended_rom2 thing.
First, can I save the cookies and stuff there?
Second, I am having the camera issue like everyone else.
Do you think it is due to the fact that the camera sees extended_rom2 as a storage card and can only use one so since E comes before S it picks extended_rom2?
Then if that is true, what do I do?
Click to expand...
Click to collapse
Be very careful with the extended rom hack (making it visible). Don't put (or change) anything in there unless you know what you are doing (or you may not be able to do a hard reset, or things won't work after a hard reset). Its a cool thing, but you can mess up stuff if you aren't careful with that. That area was hidden for a reason
If you have space issues, I would suggest you look at CID Unlocking your phone and then upgrading to a stable rom like Faria's AKU 3.3 or one of Molski's. You'll find you have a LOT of extra space available to you after doing that. Those roms (for the most part) work very well and are very stable (unlike the WM6 ones currently, although the mUn and Faria ones of those are MUCH better).
Well it is a T-Mobile and I use Cingular and O2, so I am not sure I really use any of the files in that section?
Maybe I will rehide it.
OK Mine is unlocked. I never even had it on the T-Mobile network
OK so it is a G3 and the IPL/SPL 1.08
What update is good for it? (Also, what is an ipl spl?)
Like this one?
http://forum.xda-developers.com/showthread.php?t=286987&highlight=Molski.Biz
Will the update rehide the extended_rom2?
I cannot active sync. Can I install off my SD?
MsHap said:
OK so it is a G3 and the IPL/SPL 1.08
What update is good for it? (Also, what is an ipl spl?)
Click to expand...
Click to collapse
Ok, first things first... You will need to do the CID unlock procedure. Since you are 1.08 on IPL and SPL, when you upgrade it will become CID Locked if you don't do this. So first thing, read this:
http://forum.xda-developers.com/showthread.php?t=285435
You can start at step 4 since you are already on a 1.x ROM.
Do all of the steps (including flashing the TMobile 2.26 ROM on your device). Once you complete that you will have an IPL/SPL of 2.26 and your device will be ready to install new ROMs.
Personally, I'd recommend the Faria AKU 3.3 rom:
http://forum.xda-developers.com/showthread.php?t=291806
or the Molski 2.26 Final:
http://forum.xda-developers.com/showthread.php?t=286987
I haven't used the Molski one, but a lot of people live on it and rave about it. I have used teh Faria one and its very nice and stable and comes with a lot of stuff built into it.
Understand that with all this flashing, you will have to reinstall your apps and will have to resync to get your contacts and stuff back. So take some backups before you start so you can get stuff back (or move stuff you want out to your SD card).
MsHap said:
Will the update rehide the extended_rom2?
Click to expand...
Click to collapse
Yes the upgrade to 2.26 will rehide this (I think).
I cannot active sync. Can I install off my SD?
Click to expand...
Click to collapse
Why can you not active sync? If you can't do that then you may be better off not doing any of this. There are steps of doing SD installs, but I've never done it. Read the Wiki as there is a link to a post about doing this.

problem upgrading to WM6

does anyone know why my imate kjame would give an error or Windows/autoconfig.exe doesnt exist.
i have tried a number or roms but the phone failed to upgrade to wm6. it then reverts back to the wm5 after encounting this error.
i have tried the CID unlock but there is no hope
can anyone please assist me urgently.
ghumanfly said:
does anyone know why my imate kjame would give an error or Windows/autoconfig.exe doesnt exist.
i have tried a number or roms but the phone failed to upgrade to wm6. it then reverts back to the wm5 after encounting this error.
i have tried the CID unlock but there is no hope
can anyone please assist me urgently.
Click to expand...
Click to collapse
We need more information than this if you want help...
1. Wireless Carrier?
2. IPL/SPL?
3. Roms tried?
4. How have you been trying to flash roms? What method of flashing?
5. What is your PC's operating system(your computer, not PPC)
EDIT>> Answer these questions for me and I will try my best to help you tomorrow some time. I live in Cental US so I might not get your messages until later tomorrow your time but I will respond in the morning tomorrow.
info
forgive me if there is anything that i dont get correct....
1. Wireless Carrier?
i am assuming that this is the service provider and that is vodacome for me. it is a not the same as vodafone however they have a JV running
2. IPL/SPL?
IPL - 2.16.0001
SPL - 2.16.0001
rom version - 2.16.9.1
radio - 02.07.10
extROM - 2.16.9.101
OS - WM5
3. Roms tried?
i tried one of the ROMs that my IT team provided to me. i have attached the rom.
i also tried Octvio's rom (ROM_Wizard_OCTAIVOI_OS_1908_v4[1].8_PP6MB)
i also tried CB-AIRAF
4. How have you been trying to flash roms? What method of flashing?
here i loaded the EnableRapi cab file and ran it on my wizard. then i ran the lokiwiz.bat file on my machine. i didnt see any error there so i take it that it ran fine.
5. What is your PC's operating system(your computer, not PPC)
i am running XP SP2 on my notebook.
couldnt attach any of the files... not sure what was causing the problem
ghumanfly said:
forgive me if there is anything that i dont get correct....
1. Wireless Carrier?
i am assuming that this is the service provider and that is vodacome for me. it is a not the same as vodafone however they have a JV running
2. IPL/SPL?
IPL - 2.16.0001
SPL - 2.16.0001
rom version - 2.16.9.1
radio - 02.07.10
extROM - 2.16.9.101
OS - WM5
3. Roms tried?
i tried one of the ROMs that my IT team provided to me. i have attached the rom.
i also tried Octvio's rom (ROM_Wizard_OCTAIVOI_OS_1908_v4[1].8_PP6MB)
i also tried CB-AIRAF
4. How have you been trying to flash roms? What method of flashing?
here i loaded the EnableRapi cab file and ran it on my wizard. then i ran the lokiwiz.bat file on my machine. i didnt see any error there so i take it that it ran fine.
5. What is your PC's operating system(your computer, not PPC)
i am running XP SP2 on my notebook.
Click to expand...
Click to collapse
Ok I see that you have a G4. Lokiwiz is a waste of your time since you have a G4.
Here is what you need to do:
Because you have a G4, you can't just flash a rom because of the DOC chip.
There are 3 ways I know of to flash a G4.
1. Download shelltools - install enablerapi.cab and cert_spcs.cab and reboot your device. connect with activesync and place the nk.nbf file of the rom of your choice in the shelltools directory and run shelltools and follow the directions in the readme. If you do it correctly, you will end up successfully flashing your device.
Link: http://forum.xda-developers.com/showthread.php?t=293480
2. Download SoftSPL and place the nk.nbf file of your choice in the RUU folder included and run SoftSPL and it is fully automated. It will call the RUU and your device will be flashed in about 7 minutes.
Link: http://forum.xda-developers.com/showthread.php?t=329147
3. Use the HardSPL(CID UNLOCK) and unlock your device prior to flashing. This will allow you to just flash roms at your leisure with no problems whatsoever from now on BUT it is still in developement so use at your own risk.
LINKS: http://forum.xda-developers.com/showthread.php?t=332330
http://forum.xda-developers.com/showthread.php?t=332320
I hope this helps you. I personally have a G3 so this is not my area of expertise...
wm6
thanks alot me. it upgraded properly
i am trying get all add ons.
ghumanfly said:
thanks alot me. it upgraded properly
i am trying get all add ons.
Click to expand...
Click to collapse
No problem... Now you're at the fun part. Add ons!!
add ons
when it comes to add ons,I was reading on the Rom Kitchen thread and and I couldn't see much more that could be added to the rom that Faris V5's nbf file.it seems to be one of thee most comprehensive files that I have come across. the only issue is that it runs a bit slow but it cool.I might just need to do some memory management.
other than that I would recommend the file.
do you have any other recommendations?
have u seen the article that microsoft wants xda dev... to remove all of its roms from the website?
ghumanfly said:
when it comes to add ons,I was reading on the Rom Kitchen thread and and I couldn't see much more that could be added to the rom that Faris V5's nbf file.it seems to be one of thee most comprehensive files that I have come across. the only issue is that it runs a bit slow but it cool.I might just need to do some memory management.
other than that I would recommend the file.
do you have any other recommendations?
have u seen the article that microsoft wants xda dev... to remove all of its roms from the website?
Click to expand...
Click to collapse
I personally use the TNT.1437 TouchFlo and TNT.1437 Professional+HTC Home roms personally modified to have a 10MB page pool. They are quite fast and are almost 100% stable with only minor bugs that are barely noticible...
Here is a link to the 10MB Version of TNT.1437 Touchflo
http://www.megaupload.com/?d=TM2N1W2R
Here is a link to the 10MB Version of TNT.1437 Prof+HTC Home
http://www.megaupload.com/?d=RZFKY868
If you would like, I can speed up the performance of faria's rom also and then upload the new nk.nbf file for you to try. Just let me know.
speed
Yes, please.... speed it up for me. if there are any other applications (add ons) that you feel should be added to the nbf file then please add them.
i have already shared the nbf file with many guys at work. we would be grateful if you can assist.
one last thing, i noticed that there is a 3G icon under the comms manager. one of the guys said that we should not have any issues accessing 3G even if the phone didnt come with it. is it possible to use 3G on these phones?
cmd> prompt when i use mtty
--------------------------------------------------------------------------------
hi,
i;ve managed 2 screw up my wizard
everything was going well
i flased sucessfully 2 three different roms..
then i flased the tnt latest beta rom
i worked fine
i reflased the same rom by mistake as i wanted 2 flash a diferent rom
this is when the problem sarted..
the upgrade got stuck at 66%
i waited for 15 minutes..
then i disconnected the usb from the phone & since then the phones stuck in the bootloader..
i've used mty
this is where i'm in unknown teritory..
it gives me cmd> prompt
no USB prompt..
any sugestions??

SIM Unlock help...

Hi all,
I had an O2 XDA Stellar which I believe is the HTC TYTN II. However, this phone was stolen a couple of weeks back. I purchased a second hand one today which is sim locked to the orange network. I managed to break the lock by following the instructions on this link http://forum.xda-developers.com/showthread.php?t=433835. I followed the instructions word for word till step 5.
The problem is now though it accepts the SIM and I can dial out, I don't have any audio on the calls So I can call and my phone also rings when I receive a call but I can't hear the caller nor can I be heard at the other end
Also, I hate the orange rom (and I used to complain about the O2 rom) and I wish to use the default HTC WM 6.1 professional upgrade the problem again is that it asks for a serial number and my serial number starts with DCOxxxxxxxxxxx and it says that this is not a valid serial number
What do I do now? Has my phone become a brick Please do help I can't bear the thought of having one stolen and the other toasted by me
All help will be greatly appreciated
fmervin said:
Hi all,
I had an O2 XDA Stellar which I believe is the HTC TYTN II. However, this phone was stolen a couple of weeks back. I purchased a second hand one today which is sim locked to the orange network. I managed to break the lock by following the instructions on this link http://forum.xda-developers.com/showthread.php?t=433835. I followed the instructions word for word till step 5.
The problem is now though it accepts the SIM and I can dial out, I don't have any audio on the calls So I can call and my phone also rings when I receive a call but I can't hear the caller nor can I be heard at the other end
Also, I hate the orange rom (and I used to complain about the O2 rom) and I wish to use the default HTC WM 6.1 professional upgrade the problem again is that it asks for a serial number and my serial number starts with DCOxxxxxxxxxxx and it says that this is not a valid serial number
What do I do now? Has my phone become a brick Please do help I can't bear the thought of having one stolen and the other toasted by me
All help will be greatly appreciated
Click to expand...
Click to collapse
Did you actually read anything or did you just start hacking away ? I will cut and paste a few items out of that thread, so that you don't have to actually read it .
PLEASE READ THE *FAQ* BEFORE FLASHING OR ASKING QUESTIONS!!!
* IF YOU DONT NEED TO FLASH A NEW ROM THEN PROCEED TO STEP 6 TO PUT YOUR DESIRED RADIO BACK*
7. After I flash a Rom I dont have any sound in calls and the camera is black
The Radio has to match the version of Rom you flash i.e. WM6.1, an incorrect Radio will give sound and camera problems. Read The Ultimate Radio Thread to find a Radio that matches the Rom there are lots to try on there if one doesnt work then try another.
3. What are the different types of Unlock?[/B] (answer by DaveShaw)
The three stages of unlock are:
SIM: Allows you to use SIM's from another carrier. Can be done using codes or unlocker programs on xda-devs.
Security: Allows you to flash radios from another device - It does other stuff, but this is all the casual user will use it for
CID: CID unlocking is an old concept, nowadays you flash HardSPL instead. This lets you flash any ROM, Splash or Radio (depending on sec unlock) to your device. N.B. the CID is the carrier ID (e.g. HTC__001). The stock SPL's only let you flash ROM's that match the CID in the ROM image with the CID on your device.
Obviously you did not unlock your phone if a serial number is needed to flash a new rom. I would re read everything and do it again
Thanks for the reply
denco7 said:
Did you actually read anything or did you just start hacking away ?
Click to expand...
Click to collapse
As a matter of fact I did read that more than once.
denco7 said:
* IF YOU DONT NEED TO FLASH A NEW ROM THEN PROCEED TO STEP 6 TO PUT YOUR DESIRED RADIO BACK*
Click to expand...
Click to collapse
As you can see I'm a bit of a newbie here, so wasn't too sure if I did need to flash to a new rom. But I did anyway. And the call problems still remain
denco7 said:
7. After I flash a Rom I dont have any sound in calls and the camera is black
The Radio has to match the version of Rom you flash i.e. WM6.1, an incorrect Radio will give sound and camera problems. Read The Ultimate Radio Thread to find a Radio that matches the Rom there are lots to try on there if one doesnt work then try another.
Click to expand...
Click to collapse
I've been through this link as well and I was contemplating installing the latest version of the HTC WM6.1 ROMS (version 3.34.721.2, radio version 1.70.19.09) available at http://wiki.xda-developers.com/index.php?pagename=Kaiser_ROMs However I was not sure if this would be ok and (at the risk of sounding extremely dumb) I was not sure what WWE stood for
denco7 said:
3. What are the different types of Unlock?[/B] (answer by DaveShaw)
The three stages of unlock are:
SIM: Allows you to use SIM's from another carrier. Can be done using codes or unlocker programs on xda-devs.
Security: Allows you to flash radios from another device - It does other stuff, but this is all the casual user will use it for
CID: CID unlocking is an old concept, nowadays you flash HardSPL instead. This lets you flash any ROM, Splash or Radio (depending on sec unlock) to your device. N.B. the CID is the carrier ID (e.g. HTC__001). The stock SPL's only let you flash ROM's that match the CID in the ROM image with the CID on your device.
Obviously you did not unlock your phone if a serial number is needed to flash a new rom. I would re read everything and do it again
Click to expand...
Click to collapse
I maintained the default that was given by the unlocker for the CID (I think all zeros). Do I have to change this as per the ROM image? I don't mind re-doing this again it's a relief that my device isn't busted
No your phone isn't busted. Go into bootloader and check what it says next to spl, if you followed Mark's steps, it should say 3.29 Hard. If that is what it says ,then you can flash any Kaiser rom you want. If it doesn't then start over again.
WWE stands for World Wide English and those roms are all in English. That rom you picked will be fine, if you do not wish to explore the fine world of custom roms ? Maybe later.
You only have to CID unlock once by following the steps, not at every rom flash.
No sound means wrong radio, 6.0 roms need 6.0 radios and 6.1 roms need 6.1 radios. If the rom has a radio in it already then flash away.
Thanks Denco Flashed the ones I mentioned and it works perfect. Can't believe I actually have a working device Thanks for all your help, really great.
Now to sync my data to my new (second hand) htc and I'm good to go
Another question, the device works fine, however since it is a HK rom, it seems to have localised to HK. I've changed this as much as possible to UK. However, I'm wondering if this will affect anything else? For example the gps? Is there any quicker way to configure this globally so all settings use UK instead of HK?
Why didn't you flash the latest UK ROM.
Use this code: HT750GB02264 to download from HTC's site.
fmervin said:
Another question, the device works fine, however since it is a HK rom, it seems to have localised to HK. I've changed this as much as possible to UK. However, I'm wondering if this will affect anything else? For example the gps? Is there any quicker way to configure this globally so all settings use UK instead of HK?
Click to expand...
Click to collapse
Once you are unlocked and HardSpl'd you can flash any rom you want. Pick a UK one another WWE rom or a custom rom. Test a bunch until you have one you like. Your only restriction is it has to be a Kaiser rom. And with all the Kaiser roms available, it is not a restriction at all.
Mister B said:
Why didn't you flash the latest UK ROM.
Use this code: HT750GB02264 to download from HTC's site.
Click to expand...
Click to collapse
Wow, thanks for that, I was looking for a valid serial through which I can download from the htc uk site One question I had is do I install the radio which I download from htc? Or do I keep the one I have already flashed? The one I have flashed yesterday seems to be a later version than what I've downloaded from htc
denco7 said:
Once you are unlocked and HardSpl'd you can flash any rom you want. Pick a UK one another WWE rom or a custom rom. Test a bunch until you have one you like. Your only restriction is it has to be a Kaiser rom. And with all the Kaiser roms available, it is not a restriction at all.
Click to expand...
Click to collapse
1. I keep hearing on this forum about Hard SPL, I'm not sure what this is used for or why it is required but I followed the instructions and it seems I had installed JumpSPL1.56-KAIS.exe. Now, since then I had flashed the rom, so do I need to reinstall this again? Is there some other one I should be using? I come across different versions on some threads. Also, how can I check the version of HardSPL I have?
2. When I view the memory (under settings) it shows me Storage and Program. However, I can't seem to see any storage area in file explorer. I know in my old xda 2i, there used to be a separate storage area. The reason is because some of the apps I install are quite bulky for example lexisgoo english dictionary (the dictionary files themselves are about 18mb) and this fills up the main memory. How can I install this in the storage memory? (not storage card since I sometimes swap storage cards)
Sorry lot of questions I know, but I'm a newbie and all help will be greatly appreciated
The UK downloaded ROM will install the radio too.
I would do a bit of testing with your current set-up, then flash the UK ROM.
Test the new UK ROM & radio & then reflash the radio only if you want (do some searching on Radio versions)
Newer versions are not always best, chasing the latest builds normally bites you in the ass at the end of the day.
Check HardSPL by going into bootloader:
* Using a stylus, press and hold the soft reset button at the bottom of the phone along with the camera button
* Release both buttons once the bootloader screen appears
* Exit bootloader by pressing soft reset button
Once you have installed HardSPL thats it, job done (you installed it during unlocking)
What you see in file explorer regarding storage is correct: 128MB RAM for running software ect & 256MB ROM for storing your programs ect (WM2003SE was different)
ROM can be increased by using one of the cooked lite ROMs if storage space is a concern.
Mister B said:
The UK downloaded ROM will install the radio too.
I would do a bit of testing with your current set-up, then flash the UK ROM.
Test the new UK ROM & radio & then reflash the radio only if you want (do some searching on Radio versions)
Newer versions are not always best, chasing the latest builds normally bites you in the ass at the end of the day.
Click to expand...
Click to collapse
Will do, the HK version seems very stable, the only thing that bothers me is the region settings. Anyway, I think I'll give the UK Rom a go and if that works well I'll stick with it
Mister B said:
Check HardSPL by going into bootloader:
* Using a stylus, press and hold the soft reset button at the bottom of the phone along with the camera button
* Release both buttons once the bootloader screen appears
* Exit bootloader by pressing soft reset button
Once you have installed HardSPL thats it, job done (you installed it during unlocking)
Click to expand...
Click to collapse
I checked the version and this is what it showed:
KAIS130
SPL-3.2.9.Hard
CPLD-8
Click to expand...
Click to collapse
TBH, I don't know what any of that means But do you think the version I have is ok, or do I need to upgrade this to some other version?
Mister B said:
What you see in file explorer regarding storage is correct: 128MB RAM for running software ect & 256MB ROM for storing your programs ect (WM2003SE was different)
ROM can be increased by using one of the cooked lite ROMs if storage space is a concern.
Click to expand...
Click to collapse
I've attached a screenshot of my memory screen. The bit that puzzles me is that the storage area apparently has a lot more storage but I do not have an option to install all my applications on that area or atleast the bulky ones. I don't think I need a lite one since I do have 112MB free in the storage area which is more than sufficient for all the apps I usually install. Can you advise how I can install apps to the storage area as well?
Lastly, I was wondering if it is possible for me install my apps on the rom and then kind of take an image of my setup and flash the rom with this setup. That way when I do a hard reset, all my apps are installed again. Which will save me the trouble I know sprite backup does something like this but I'd prefer if it was in the rom
Thanks for all your help, it has given me a lot of confidence in these matters. Something I probably wouldn't have attempted
Mister B said:
Test the new UK ROM & radio & then reflash the radio only if you want (do some searching on Radio versions)
Newer versions are not always best, chasing the latest builds normally bites you in the ass at the end of the day.
Click to expand...
Click to collapse
I agree 101% and it appears fewer resources are put into ironing out bugs in the WM 6.1 ROMs than the WM 6.0 ones. I replied to fmervin's post in the ROM forums along these lines.
If all is running OK I would stick with your current HardSPL.
When installing your applications choose the option of installing to "Device"
You could install all your apps into a ROM, this would be cooking a ROM & is a complex process.
I would suggest a backup via Sprite or SPB. I use SPB v2.0 build3065 & it works well for me, preference of backup software is a bit of a Marmite scenario, you either love it or hate it.
Lastly, I was wondering if it is possible for me install my apps on the rom and then kind of take an image of my setup and flash the rom with this setup. That way when I do a hard reset, all my apps are installed again. Which will save me the trouble I know sprite backup does something like this but I'd prefer if it was in the rom
Click to expand...
Click to collapse
You can't do that, it is flash memory. It's not like you can partition the hard drive.
But this is the easiest way to get your Apps and settings back after a flash.
Try this Sashimi Auto installer by a former XDA member. It is a nice little program that installs all your apps after a flash
http://www.winmo-experts.com/viewtopic.php?f=7&t=4
Help Please
Hey Denco..Than'x for considering my thread & giving out suggestion towards the link to check the info. But i m really nt that techy afterall so i can burn a ROM on my Tytn II. Even though i tried to burn a RUU rom that supports TyTN II ..Its just gets disconnected from USB mode..So i was looking forward to start it initially with some comparatively easier to install .cab files..Can't these RUU files be transformed into .cab files or maybe some other version of Manila 3D cab file that is completely fixed...I seriously have done a lot of research upon this but nothing looks like working. So please if you have some links to .cab files that can give a better & different look to my Kaiser running Windows 6.1...It'l be a great help !!
Than'x & regards in advance
vicky_crispy said:
Hey Denco..Than'x for considering my thread & giving out suggestion towards the link to check the info. But i m really nt that techy afterall so i can burn a ROM on my Tytn II. Even though i tried to burn a RUU rom that supports TyTN II ..Its just gets disconnected from USB mode..So i was looking forward to start it initially with some comparatively easier to install .cab files..Can't these RUU files be transformed into .cab files or maybe some other version of Manila 3D cab file that is completely fixed...I seriously have done a lot of research upon this but nothing looks like working. So please if you have some links to .cab files that can give a better & different look to my Kaiser running Windows 6.1...It'l be a great help !!
Than'x & regards in advance
Click to expand...
Click to collapse
I think you need to decide what it is that you want to accomplish. Unless you cook your own rom, there is no way to add apps to the rom ( so that they will remain after a hard reset) Your rom is wyour phone's base operating system, it contains your OS (WM 6.1 ) and can only be replaced after completely erasing and replacing all files from the previous rom.
If it is a new rom you want, pick a rom that interests you and follow these instructions verbatim .
http://forum.xda-developers.com/showthread.php?t=433835
Your phone will go to the bootloader screen ( three color) and it will disconnect from usb during the process, but be patient until the end. When it says it takes ten minutes, it takes ten minutes. Leave the room if you have to , to keep from getting impatient.
If you just want to keep your OEM WM 6.1 and keep it simple, but change the look of your phone try this,
http://www.htcwiki.com/page/Manila+2D+and+M2D+Themes
This will change the look and feel of your phone with uninstallable .cab files and will not affect the rom or brick your phone by accident.

Categories

Resources