Problem with contacts and missing numbers - P3600 Software Upgrading

Hi all,
I got my spv m700 today. I have unlocked the sim and cid. I then flashed a new rom onto it. The only problem I have is my contacts, they are all on my sim. The thing is most of them have their numbers missing. Anyone got any ideas to help me.
Thanks in advance

Are you sure the numers are missing?
Look at each contact and see if the number is in a different field to the ones you are used to looking at / seeing.... if you see what I mean

Yes I know what you mean. I have opened the contacts and there is absolutely nothing there but their name. Out of 47 contacts I have all the names but only 3 with their numbers

eeeeerrkkk
have you checked your old phone to see whats in there? You might get lucky, but looks / sounds like you lost the lot

Related

Phone numbers displayed with a hyphen

I've for some time been using the WM6 ROM (AX3L_OS v2.0.8) with no problems but recently my PC threw a wobbler and killed Active scyn. I had to do a hard boot on my SPV M700 and reload all the programs etc. I have since the reboot noticed that all numbers that ring me that are not in the contacts list are seperated in the middle by a hyphen eg. 123-456 instead of 123456. Can anyone help? Has anyone seen this before? Have I done something wrong since the hard re-boot or have I perhaps forgatten to do something?
Thanks in advance
MIZZO1628 said:
I've for some time been using the WM6 ROM (AX3L_OS v2.0.8) with no problems but recently my PC threw a wobbler and killed Active scyn. I had to do a hard boot on my SPV M700 and reload all the programs etc. I have since the reboot noticed that all numbers that ring me that are not in the contacts list are seperated in the middle by a hyphen eg. 123-456 instead of 123456. Can anyone help? Has anyone seen this before? Have I done something wrong since the hard re-boot or have I perhaps forgatten to do something?
Thanks in advance
Click to expand...
Click to collapse
Change your Regional Setting to some other one, and it will change the phone number formatting also. For instance, English UK works for me, no hyphens in the number formatting.
Thanks but where do I find the region settings....in the Registry?
MIZZO1628 said:
Thanks but where do I find the region settings....in the Registry?
Click to expand...
Click to collapse
Start, Settings, System, Regional Settings

slide2unlock and Call Display

I'm using the latest version of Slide2Unlock found here:
http://forum.xda-developers.com/showthread.php?t=381588
Tried asking my question there, but no responses so far so I thought I'd ask in the Kaiser specific forum.
Everything seems to be working fine except when I get a call from someone in my contacts, it displays only the Number instead of their name. Anyone know how to fix this to get their name to be displayed instead?
Thanks.
I had that same problem before and it was because my contact list was from my SIM card and not the phone's memory. I had to move all my SIM contacts to the phone memory and it was fixed. Hope that fixes your problem..
i am quite sure if you open the slide to unlock settings there is an option for how you want the contact to be displayed.
zakiwashi said:
i am quite sure if you open the slide to unlock settings there is an option for how you want the contact to be displayed.
Click to expand...
Click to collapse
There is something to display how the number is displayed ie. (###) ###-#### or ###-###-###
I haven't come across anything that says whether or not to display the name of the contact. If you could point me in the right direction it would be greatly appreciated.
shl6737 said:
I had that same problem before and it was because my contact list was from my SIM card and not the phone's memory. I had to move all my SIM contacts to the phone memory and it was fixed. Hope that fixes your problem..
Click to expand...
Click to collapse
That could be the problem. All of my contacts are on my SIM card as I just got the phone about a week ago and haven't transferred them over yet. I'll see if that makes a difference. Thanks.
yeah, my contact names show up..... i am using S2U2 1.00 w/o any issues
adidas4275 said:
yeah, my contact names show up..... i am using S2U2 1.00 w/o any issues
Click to expand...
Click to collapse
Are your contacts from your SIM card or stored on your phone?
there is an option to 'enable caller id' this puts the contact picture on screen
Slide2Unlock which Ver????
I,m a noob and I read so much. But which version works 100% in a ATT Tilt with out a cooked ROM. I really like to know

Service Numbers appear in Contacts list

Hi, Sorry if ther eis already info on this, i have been searching but haven't found anything.
I jsut changed to the resently released HTC WM6.1 ROM on my Orange TyTN iI. everything is working great, but for some reason i get the orange servce numbers (answerphone, text center etc) appear in my contact list.
I've tried updating the SIM manager application but doesnt seem to have fixed the issue.
Thanks,
stupid question, but alot of factory ROM's add those numbers to your contacts, Have you deleted them from your contacts? Thats all you need to do.
Those numbers can't be deleted as the delete button is greyed out and they don't exist in the sim manager program, you can just hide them using the kaiser tweak tool
Thanks, i'll try that out.
I don't really think it's a stupid question though, as said above, the "delete" option is grayed out. As i said in my original post the nubers are the service numbers stored on the SIM. I don't really appreciate such unhelpful replies.
funny must be a SIM thing cause I can delete them whey they come up on certain ROM's into my phone contacts. I had them on my SIM at one time and they are deleted.
**HAHAHAHA, no sorry i meant me, my question, i thought i was readin it wrong. i see now how it can be misunderstood. my bad**
**Did you go into the Sim Manager, Menu, Tools, and go to Service Dialing Numbers... and try deleting from there?**
I did try using the SIM mangaer but it doesn't give te option to delete the service dialing numbers. It's quite strange, but have managed to hide them with the tweak tool.
yea as i said its probably built into the sim. I guess if they are going to start pulling that shiz then i will have to make sure to keep my sim card. if i can help it i never let them swap out my sim card. usually those little bastards will do it without saying anything anymore.

All my SIM contacts were deleted :(

Hi,
First off, thank you for a really information rich and professional forum!
To my problem, I have the HTC Touch Diamond and I recently changed ROM to dutty's. By mistake I deleted all contacts in my phone book, unfortunately all my SIM contacts were deleted as well. I understand that it might be impossible to restore them since they were stored physically on a SIM card but I have seen some people in this forum manage to do things with this phone that I did'nt think were possible so I thought that I'll give you guys a try.
Is there a way to undo the deleting or am I screwed?
well though i can`t help you i`d like to give you an advice. didn`t you read in flashing manual BACKUP before flashing ? always backup backup backup unless you don`t store your contacts on Exchange server
Oh the problem did not occur after or during flashing, I just wanted you to know which ROM I am using. I could have done this with the stock ROM as well..
I just wanted to know if the diamond was that advanced that it stored all my deleted elements in the memory until I restart it.
Did your contacts really get deleted?
Dutty usually disables the display of SIM contacts (as do other cooks).
They might still be there, you just might not be seeing them.
^.^
check the sim manager
they maybe there...hiding!
i have flashed 100's rom and they have never touched the sim cards
Hehe as I said in my previous post it has nothing to do with the ROM-flashing. When I enter the SIM Manager it is empty and when I look at the properties of my SIM card it is totally empty, no entries, blank.. ****ed in other words
I dont count on solving this problem as the contacts are physically deleted but it would be really cool if the phone had it stored in the memory somewhere..
scanie said:
Hehe as I said in my previous post it has nothing to do with the ROM-flashing. When I enter the SIM Manager it is empty and when I look at the properties of my SIM card it is totally empty, no entries, blank.. ****ed in other words
I dont count on solving this problem as the contacts are physically deleted but it would be really cool if the phone had it stored in the memory somewhere..
Click to expand...
Click to collapse
it sounds like you may be buggerd m8
your old phone still don't have a contacts list i take it?
I dont understand what you mean with "old phone" but I take it as you wonder if I have my contacts on the phone I used before the Diamond. I still do have some contacts on that one but not all unfortunately. Well seems like the only thing I can do is adding the contacts manually when I receive calls from my friends :\
Thank you anyway for your time!

caller ID ??? wtf??

So I loaded a new rom (energyrom3.0) running WM 6.5.
and when i did my restore for all my contacts etc using pimbackup, i see my contacts list just fine. but when someone calls, i just see their number no name or anything!!
i restored again and still no caller id....
I did a search and im not finding any info on this.
can someone tell me what Im doing wrong??
(htc fuze running energy rom 3.0)
it sucks not knowing whos calling or texting me, now I have gotten into the habit of not answering my phone because of this issue...
I cant memorize all my contacts !
Thanks for any help
anyone seen this?
its probably some setting that I have not seen...
yep - im getting the same problem and raised a
separate thread - lots of views but no replies
i think its a wm6.5 issue.
im on energy rom - which is superb so far - but the callerid and sms id is causing me problems so i may have to revert to an older rom
I can't say that I've experienced this. (Running RRE's rom though) Have you tried install slide to unlock just for the full screen caller id that it has? (you can disable the actual locking part if you dont want it). Also, what dialer are you using?
I used active sync and outlook for my syncing and backing up my contacts and it all worked fine with nrg 3.0.
yea i have a buddy that uses outlook sync to restore.
how do i use that?
im using the stock dialer.
try s2u2 you say?
i ahve had it in the past, i will install that and see how it works. just so many dam options when setting it up. can be a bit time consuming...
thanks for the replies peeps
where are your contact pictures located? In the past, if you stored them on the Storage Card, then it could also cause a delay/issue. Just a thought for something to try.
yep - i also used pimbackup - and energy 3.0 - and im having the same problem.
wonder if its to do with the backup/restore rather than syncing
element2zz said:
I cant memorize all my contacts !
Thanks for any help
Click to expand...
Click to collapse
I think you should just memorize all of your names and numbers. Think how much more that would impress your friends than a fancy phone...
Try ActiveSync on the PC. If you are on Vista, you will need Windows Mobile Device Center, which unbeleivably does not auto-install with a new OS image. You can find it on Microsoft website for free, the same for ActiveSync if you are on XP. However, to use Activesync, you really need Outlook to get much value out of it. The huge upside is that if you use Outlook and ActiveSync, you will have a copy of all your contacts in 2 different physical locations.
Doug M.
if you hit the pwr button quick 2x on incoming call, it will show...
noellenchris said:
if you hit the pwr button quick 2x on incoming call, it will show...
Click to expand...
Click to collapse
lol really?
Sounds like an issue with energyrom. I am running Da_G's clean fuze 2 WM6.5 and i did a pim backup and restore and it works fine for me.
sevenalive said:
Sounds like an issue with energyrom. I am running Da_G's clean fuze 2 WM6.5 and i did a pim backup and restore and it works fine for me.
Click to expand...
Click to collapse
it could very well be...
is this happening to anyone else??
i have fixed this - somehow ?!
removed icontact - and deleted the icontact 'contacts file'
did a new PIM backup - hard reset
when i looked at the texts they still had numbers not names, however i spotted that i had over 500 texts !!! cleared the lot of them out and everything working fine. callerID and text recognition perfect ....
Whether it was PIM backup, icontact or sheer volume of texts i dont know but what I can say is that its NOT the ROM.
im a happy bunny now
I am having the same problem, curently running At0mAng V5.1 WWE with WM 6.1. I did use PIM backup to restore, but to try to fix this problem I erased all of my contacts and restored them with Activesync. No luck, I suppose I should try a hard reset.
element2zz said:
lol really?
Click to expand...
Click to collapse
Yes really,.... If you hit the pwr button to off then back on, the callerID will be displayed. It's like a refresh of the lock screen. As for Energy Rom, I've been using Da_G's kitchen to cook since 21169 till 21222 and CallerID hasn't worked on the lock screen unless I do the pwr button trick.
I however have been using Exchange 2007 to sync my contacts in all versions though. Maybe it's something with that? I don't know...hopefully it will get resolved though.
Same prob here, I can tell u how to fix it..
Ive had the exact same problem with my stock Fuze. I checked HTC and even called them. Tried for nearly 3 hours on ATT talking with tech support. Yet these ppl only know whats written in their books. We, the ones that actually tweak and figure out the "bugs" in certain systems r the ones that know the answers. Thats why I love this site! .... sorry, got carried away. ... OK, ur most likely using the Advanced Config 3.3, if so, thats where the problem lies. If u go down to the "Phone" tweak inside of Advanced Config and set the "purge SIM contact when no SIM" Set this to YES. Now it DOES NOT delete the contacts as it says it should when u remove the SIM card and reboot. Instead it cuts off the NAME of ur caller ID yet still shows the number. Ive done about 12 master resets tryin to find the exact reason I kept losin my Caller ID name. This IS why. Though I have a different ROM, this just may be a bug that affects the entire system of any fone. Now my Caller ID works fine. When I install Advanced Config 3.3 and tweak it, the only things I change under the "Phone" catagory are Clean Period, cuz I like having all my calls in the dialer, and number of ID matches. Also when u install HD Tweak or Diamond Tweak do not set the ring to "Instant Ring". This will also cut the name of the Caller off. Yet u can change the "Ring Delay" to WITHOUT DELAY. This will solve the delay problem as well as the Caller ID disappearing act. I actually found that under another thread here. Both tweaks r set and my Caller ID has yet to cut off again. I may be wrong, yet it never hurts to try right? Good luck, hope this helps!
hi there,
also in advanced config is an option to use x digits as id.
i had the issue of it not recognnising contacts between 0 numbers and +44 numbers.
so i set this valuie to 10 digits then it doesnt matter about the zero or +44.
worth a shot.
panthersdzynes said:
Ive had the exact same problem with my stock Fuze. I checked HTC and even called them. Tried for nearly 3 hours on ATT talking with tech support. Yet these ppl only know whats written in their books. We, the ones that actually tweak and figure out the "bugs" in certain systems r the ones that know the answers. Thats why I love this site! .... sorry, got carried away. ... OK, ur most likely using the Advanced Config 3.3, if so, thats where the problem lies. If u go down to the "Phone" tweak inside of Advanced Config and set the "purge SIM contact when no SIM" Set this to YES. Now it DOES NOT delete the contacts as it says it should when u remove the SIM card and reboot. Instead it cuts off the NAME of ur caller ID yet still shows the number. Ive done about 12 master resets tryin to find the exact reason I kept losin my Caller ID name. This IS why. Though I have a different ROM, this just may be a bug that affects the entire system of any fone. Now my Caller ID works fine. When I install Advanced Config 3.3 and tweak it, the only things I change under the "Phone" catagory are Clean Period, cuz I like having all my calls in the dialer, and number of ID matches. Also when u install HD Tweak or Diamond Tweak do not set the ring to "Instant Ring". This will also cut the name of the Caller off. Yet u can change the "Ring Delay" to WITHOUT DELAY. This will solve the delay problem as well as the Caller ID disappearing act. I actually found that under another thread here. Both tweaks r set and my Caller ID has yet to cut off again. I may be wrong, yet it never hurts to try right? Good luck, hope this helps!
Click to expand...
Click to collapse
Mine was set to Yes by default, should I set it to no? How about show Sim contacts in contacts? Very interesting though...
The only thing I save with PIM backup are my phone calls and messages. Therefore, I rely on Outlook to sync the remaining data such as contacts and appointments and I never have issues with any rom from any device using this method.

Categories

Resources