Related
Edited 26 jan 2006
I've uploaded a second test version of HTC Wizard's rom port to ftp://[email protected]/Uploads/Blueangel/wm5_test/wizard2ba_v2a_test.rar
(this is a v2 rom with a fixed camera)
USE THIS ROM AT YOUR OWN RISK!!!
This version is a complete Wizard's ROM including:
1. Working MMS client
2. Midi/mp3 ringtone support
3. DirectX mobile/Direct3D mobile (xscale-optimized 3D driver)
4. Built-in cyberon voice-dial
5. Wizard's battery indicator, device lock on today
6. Some cosmetic changes
7. 32 Mb RAM disk
8. Bug fixes from the previous version (for example now you can add picture to contact).
There is no need to install any of the old CAB-files with fixes on this ROM. All needed fixes are included in "EXTROM" folder.
The "EXTROM" folder has changed from the previous ROM version. You need to do a hard reset before using this ROM!
Known problems:
1. Bluetooth disconnect bug is still there. I have an idea, but would check it later.
2. The device cannot be used as an IR/USB modem. This can be fixed, but I don't have enough time.
3. It seems that midlet manager is not working. Probably this is a bug in original wizard's ROM.
Installation instructions:
1. Modify the operator as needed and if needed:
xda3nbftool.exe nk.nbf nk.nba -x 0x20040521
...read wiki...
xda3nbftool.exe nk.nba nk.nbf -x 0x20040521
2. Create "EXTROM" foder on your storage card, copy there the contents of EXTROM
folder from this archive. The full name of this directory on your device should
be "\Storage Card\EXTROM".
2. Flush the ROM
3. Make the hard reset (press camera+record+reset buttons, select "format storage")
4. Boot. During the first boot the CAB-files from "EXTROM" folder would be
installed. They are unsigned, so you should press "yes" when asked, and
install them to the default folder. This process would be silent on newer
builds of this ROM.
Note for modifying the EXTROM folder:
All CAB-files should have read-only attribute set. Otherwise they would be deleted after installation. This would be fixed in the future releases. And
Config.txt is renamed to Cfg.txt.
CAB files:
Missing-Files.CAB - must be always installed. Wizard's ROM is larger than ours, so several files had to be removed and placed to this CAB.
Default_CAB-shortcut-CDL-08Sep05.CAB
Default_cdl_wwe_version.cab
Default_ie_view.sa.cab
Default_SmartDialing_enable_0915_signed.CAB - these 4 are from original Wizard's ROM.
Camera2K5.cab - camera app and drivers
Note regarding "RAM Disk32". I recommend to move temporary internet files and install unnecessary apps there. Its contents would survive soft reset, but would be cleaned if the battery is removed. The RAM Disk driver is taken from www.buzzdev.net
Okay, so I got the ROM even before you posted this topic (after an hour you've uploaded it...yes, i do check the WM5_test folder on a regular basis, hehe) First impressions is that this ROM is fast, really fast, even faster than the Hima2BA port... I can't really call WM5 "slow" anymore now, it works very well. Gonna test it a bit more later today. And THANK YOU, as usual
Just turned on cleartype and the fonts looks a bit...I don't know...weird. I'm not saying that it is worse than in the older ROMs, it just looks different somehow. Or it's just me. Edit: yes, they *do* look different. I'd say they are nicer though...
install Camera2k5_1 ,it is owrking for camera , this rom fast than others, Pocker msn can't login " sorry, We are unable to sign you in to this service because we could not detect a valid server certificate. this can occur if the date on your device is different from today date.please check the date on your device and change it if necessary.
also missing phone icon at person settingn't set ringtone
hi mwang,can you tell me where can download Camera2k5_1 ,thanks
Mamaich, what can i say, outstanding, as usual...Testing now
great man...
picture and video application isn't working though :?
working awesome, does anyone know how can i install BT Tray?
thanks mamaich
In Phone, Options doesn't work, smartdialing doesn't work...
2. "ok" hardware button is mapped to "record" and this cannot be changed. Would investigate this.
Click to expand...
Click to collapse
Strange. In my device it's mapped to the OK button as in 2003..
Bugs that I found:
1. MSN Messenger does not work
2. Phone Option does not work
3. Unable to assign picture from contacts
4. MP3 ringtone does not work
5. Voice Command BT Headset Dial (by renaming voicecmd.exe to sddialer.exe) does not work
MP3 ringtones work for me
Phone, Options isn't there. comfirm.
Hope to have a fix for that soon.
This ROM is a bit faster, but still no match for wm2003se speed..
Another problem is that I don't seem to be able to connect to the internet using AS, is it just me?
Guess it's back to 2003 for now..
d3vil said:
This ROM is a bit faster, but still no match for wm2003se speed..
Another problem is that I don't seem to be able to connect to the internet using AS, is it just me?
Guess it's back to 2003 for now..
Click to expand...
Click to collapse
I'm back to 2003SE too, currently doing restore. Guess have got to wait for some patches. I must say the speed of this is better then any other WM5 version.
wlinsong said:
hi mwang,can you tell me where can download Camera2k5_1 ,thanks
Click to expand...
Click to collapse
over here http://forum.xda-developers.com/download.php?id=6645
I'll put together quickly a WiKi article with solution to the missing phone settings and such..stay tuned.
WiKi article with solutions and general info here (and also in my signature)
There are no notifications of current internet connection, i mean wifi bluetooth or gprs in the titlebar (like those in himalaya ported WM5)
There is still error when you press album icon in camera app, which can be fixed with installing album
The hardware button OK is mapped correctly , it works fine here
The record button is mapped as Voice Speed dial (the record app is there but doesnot work)
How can i get the tray icons of bluetooth and wifi ?
I like the new battery tray icon
Port to SX66
Great work Mamaich.
Installation was very smooth. The WIki solution to the missing phone icon was a big help. I prefer this version over the orginal WM5 or the himalaya version. I like the EXTROM installation. Not having a camera installed is a big help to SX66 owners, we don't have to deal with the sound issues. Finally got a midi ringtone to work with the wizard version, prior versions I had to convert the Midi to MP3. I have had it lock up on me a few times, but haven't figured out the cause yet.
Thanks again.
Hi all,
to those of you who need an Operator-independent (AKA 'Clean'), stable, fast and space-saver ROM, i'm glad to offer my fully customized AKU 2.3, WWE 2.26 ROM.
It comes pre-loaded with the latest Compact Framework 2.0 SP1, Macromedia Flash 7.0, Intent MIDlet Manager, xnView Pocket, Total Commander 2, performance tweaks, freeware utilities, a new improved pocket IE start page and lots of ringtones, themes and Camera templates!!!
The programs and files I listed are integrated in the ROM so they don't waste any bit of your precious storage space.
EDIT: due to the problems with RUU (Rom Upgrade Utility) that many users have reported, i've re-uploaded the rom with two different RUUs, one for G3 users and the other for G4.
DOWNLOAD LINKS
G4 OWNERS (RUU 2.5.2):
LINK: ftp://xda:[email protected]/Uploads/Wizard/Roms/RUU_RIsidoro_2.26.10.2_WWE+CF2SP1_G4.exe
G3 OWNERS (RUU 2.0.1): [NOTE: You MUST have both IPL and SPL version 2.xx]
LINK: ftp://xda:[email protected]/Uploads/Wizard/Roms/RUU_RIsidoro_2.26.10.2_WWE+CF2SP1_G3.exe
How to tell which model you have:
- soft reset the phone and look at the IPL and SPL version numbers
- if the numbers end with .0001 (e.g. 2.18.0001) you have a G4
- if you have not the tailing .0001 (e.g. 2.18) then you have G3
THE ROM IN DETAILS
ROM Version: 2.26.10.2 WWE
Radio Version: 02.25.11
AKU: 2.3
IPL & SPL: NOT INCLUDED (for G4 owners)
Software pre-installed (and integrated):
.NET Compact Framework 2.0 SP1 - required to run .NET 2 applications
Macromedia Flash 7.0 - IE plug-in to play Flash animations
Intent MIDLet Manager 10.1.7.551 (Session fix included) - to run java applications
xnView Pocket 1.35 - best free image viewer (with slideshow)
Total Commander 2.0 - best free file browser, FTP client and Registry editor
Magic Button 2.0 - great free task manager [*]
vxIPConfig 0.9.7 - IP details and renew
vxUtils 1.6.4 - Ping, Traceroute, Whois, Lookup, Wake On Lan and much more
NbtstatCE 0.05 - NetBios scanner and remote shares browser
OmapClock 0.2 - CPU overclocker [*]
SmartsKey 0.52 - the best utility ever made!!! [**]
PHM TrayLaunch - application launcher (from tray) [*]
Control Panel Applets:
New Menu for WM5 2.01 - application launcher (from menu) [*]
File Dialog Changer 1.65 - to open/save files from/to anywhere [*]
Soft Key Applet Ex - to edit the default soft keys [*]
Bells and Whistles:
New pocket IE start page - Google search field (web and images), Gmail, Skweezer and PocketPCFreewares
10 new Camera templates - to take funny photos
29 new ringtones - NokiaSick is the best IMHO
2 ETEN phone dialer skins - portrait blue and black with SmartDial support! [***]
The ExtROM in details:
Cert_Disable.cab - remove the security check when installing a program
CF2reg.CAB - registry entries for CF2 SP1
Disable_security.CAB - disable every phone security check
Enable_NTIZ_.cab - enable Timezone tab in Settings->Phone
MIDLet_manager.cab - registry entries for Intent MIDLet Manager
MP-Shorcut-MMS1-Voice-CV-TMUS-060404.CAB - shortcuts for Voice and PDF viewer, MMS account creation
MP_CVSDcpl_20060220.cab - voice applet in Control Panel
MP_SmartDialing_enable_0915_signed.CAB - Enables Smartdial
PP_ExtVersion.CAB - Sets extrom version number
regsvrce.exe - needed to register Macromedia Flash 7 DLL
VJBrisk.exe - needed to register Macromedia Flash 7 DLL (Thanks Vijay)
VJTarget.lnk - needed to register Macromedia Flash 7 DLL (Thanks Vijay)
SmartDial+EtenBlackPortretENG_0.1.cab - ETEN black skin with Smartdial [****]
SmartDial+EtenDBluePortretENG_0.1.cab - ETEN blue skin with Smartdial [***]
TMOUS_Camera_Profile_reg_0414_signed.CAB - photo camera settings
Risidoro_Tweaks.CAB - tweaks
Tweaks:
IE zoom set to Normal
HKCU,"Software\Microsoft\Internet Explorer\Main","ZoomSetting",0x00010001,2
Keyboard status (CAPS LOCK, Blue/Red key modifier)
HKCU,"ControlPanel\Keybd","EnableIndicator",0x00010001,1
SIM contacts are not listed in Contacts
HKCU,"ControlPanel\Phone","ShowSim",0x00010001,0
Cache, cookies and History relocated to SD card
HKCU,"Software\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders","Cache",0x00000000,"\Storage Card\Program Files\IEM\Cache"
HKCU,"Software\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders","Cookies",0x00000000,"\Storage Card\Program Files\IEM\Cookies"
HKCU,"Software\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders","History",0x00000000,"\Storage Card\Program Files\IEM\History"
Disconnect button in GPRS notifier
HKLM,"ControlPanel\Phone","Flags2",0x00010001,16
Wireless plugin in Today
HKLM,"Software\Microsoft\Today\Items\Wireless","DLL",0x00000000,"netui.dll"
HKLM,"Software\Microsoft\Today\Items\Wireless","Enabled",0x00010001,1
HKLM,"Software\Microsoft\Today\Items\Wireless","Flags",0x00010001,0
HKLM,"Software\Microsoft\Today\Items\Wireless","Options",0x00010001,0
HKLM,"Software\Microsoft\Today\Items\Wireless","Order",0x00010001,0
HKLM,"Software\Microsoft\Today\Items\Wireless","Type",0x00010001,4
Bluetooth transfers enabled
HKLM,"Software\Microsoft\Obex","IsEnabled",0x00010001,1
Timezone tab in Settings->Phone (duplicated)
HKLM,"Software\OEM\PhoneSetting","ShowTimeZonesPage",0x00010001,1
Menu animations disabled
HKLM,"System\GWE\Menu","AniType",0x00010001,0
Glyphcache - improves speed
HKLM,"System\GDI\GLYPHCACHE","limit",0x00010001,16384
Cleartype in landscape mode
HKLM,"System\GDI\ClearTypeSettings","OffOnRotation",0x00010001,0
Differ icons for GPRS and EDGE
HKLM,"Drivers\BuiltIn\RIL","EnableDifferGprsEdgeIcon",0x00010001,1
Workaround to avoid GPRS connections conflict with phone calls
HKLM,"Drivers\BuiltIn\RIL","GPRSStallWorkaround",0x00010001,0
Enable DTMF
HKLM,"Drivers\BuiltIn\RIL","EnableDTMFSupport",0x00010001,1
Enable WiFi 802.11g (54 Mbps)
HKLM,"Comm\TNETWLN1\Parms","dot11SupportedRateMask",0x00010001,1
HKLM,"Comm\TNETWLN1\Parms","dot11SupportedRateMaskG",0x00010001,8
NOTES:
[*]: the program is in ROM but you need to manually enable/start it if you want it.
[**]: SmartsKey is in \Program Files\SmartsKey+OmapClock you need to start it from here. Smartskey's INI files has been preconfigured to overclock the wizard to 228MHz. Create a new smartskey.ini if you want to make changes and overwrite the one in rom.
[***]: ETEN blue dialer skin is automatically installed during the extrom installation. It is NOT in rom so it wastes a bit of space in \windows but you can uninstall it if you don't like it.
[****]: ETEN black dialer skin is in \extended_rom. Use Total Commander to open the folder and doubleclick to install it.
Wow...2.26 roms are poping up everywhere! Now the time comes to choose one. As far as your goes does it come with the ability to remove the programs you listed? As well as the ringtones and themes? I hate having all of that stuff on my phone and not using it!
thankins said:
Wow...2.26 roms are poping up everywhere! Now the time comes to choose one. As far as your goes does it come with the ability to remove the programs you listed? As well as the ringtones and themes? I hate having all of that stuff on my phone and not using it!
Click to expand...
Click to collapse
You cannot remove them BUT they're in ROM so they don't waste any space on your main storage. Moreover, the slipstreamed CF2 SP1 and Flash7 let you save about 6.5Mb of storage (or 2.5Mb if you install CF2 in SD card).
Anyway, choose the rom that best suits you.
Bye bye
Thanks for the quick reply...have you noticed any bugs/problems with your ROM?
thankins said:
Thanks for the quick reply...have you noticed any bugs/problems with your ROM?
Click to expand...
Click to collapse
No (fingers crossed).
Basically, it is the T-mobile US 2.26 ROM so it behaves just like any other t-mobile 2.26 ROM. I only added some files (i didn't touch any of the original files).
Try it if you want but remember: if you have a G3 phone then you must have both IPL and SPL version 2.xx to install this rom.
Bye
Sounds righteous dude! I'm looking forward to seeing the performance.
Thanks!
Hi guys.
Great work with all the custom roms. I have a problem with these english roms that i hope you guys can help me fix. I posted this in its own thread but i dont know if you guys read that som hopefully you will give me a litle of your valued time and see if you can help me out
I have been messing around with differnt rom versions on my Danish qtek 9100. There has been no new updates out in Danish for a long time and the phone is quite buggy. Anyways, i have tried multiple roms and they all seem to work well but my problem is that i need my danish keyboard to funktion with Æ Ø Å which are one my phone keyboard.
when I install the cab Default_Prodigy_Nordic_keyboard_1102.sa
from
ftp://xda-developers.com/Wizard/Extended_Roms/ExtRom_1030712_121_10410_Qtek_NOR_Ship.rar
The Æ Ø Å buttons on the keyboard works but The 4 point navigation "joystick" with the button in the middle stops working.
What can i do?
Also, how do i go about getting a danish T9
Thanks
Jacob
I'm interested in this ROM however I need a refresher regarding loading extended roms such as (ftp://ftp.xda-developers.com/Wizard/Extended_Roms/cingular-ExtROM.zip) I've been spoiled with Roms that have always inculded the Cingular settings (thanks to Summiter).
Looks like this might be a better cingular setting file to run - http://forum.xda-developers.com/viewtopic.php?t=61619
Is it as easy as copying to the SD card and executing?
Wow, your ROM sounds great. I just flashed the Xelencin ROM, but I may redo it with yours. However, I have a question regarding the Radio version.
I just received a warrantee replacement phone from T-Mobile USA today. When I booted it up, it showed the following:
IPL 2.26
SPL 2.26
GSM 02.26.11
OS 2.26.10.2
I then flashed the Xelencin 2.26 ROM with this filename:
T-Mobile_RUU_Wizard_2261020_226_22511_ENG_US.exe
Upon rebooting, the following was shown:
IPL 2.26
SPL 2.26
GSM 02.25.11
OS 2.26.10.2
Your notes indicate that your ROM includes Radio version 2.25.11. Do you know what the difference is between 02.25.11 and 02.26.11?
I don't think I can get the 02.26.11 back now that I've flashed it. I didn't make a backup of the shipped ROM first.
I just flashed my phone from Cingular 2.26 Aku2.3 w/a2dp FULLY LOADED *BETA* to this one but i guess it did not work correctly. The phone works fine but there are no ekstra ringtone or program or anything like that. What could have happened?
Error 208
The rom looks very promessing, but something goes wrong... I receive an error 208. Anybody any idea what means?
Who can help the newby?
Thanks in advance!
I am very excited to try this, and read above about the Cingular extended rom as well, So i would install this and then run the Cingular Extended ROM to copy over some of the Cingular Settings that I may be missing?
Also what is diifference in this compared to the BETA 2.26 ROM that is out there!?
yowzator said:
Wow, your ROM sounds great. I just flashed the Xelencin ROM, but I may redo it with yours. However, I have a question regarding the Radio version.
I just received a warrantee replacement phone from T-Mobile USA today. When I booted it up, it showed the following:
IPL 2.26
SPL 2.26
GSM 02.26.11
OS 2.26.10.2
I then flashed the Xelencin 2.26 ROM with this filename:
T-Mobile_RUU_Wizard_2261020_226_22511_ENG_US.exe
Upon rebooting, the following was shown:
IPL 2.26
SPL 2.26
GSM 02.25.11
OS 2.26.10.2
Your notes indicate that your ROM includes Radio version 2.25.11. Do you know what the difference is between 02.25.11 and 02.26.11?
I don't think I can get the 02.26.11 back now that I've flashed it. I didn't make a backup of the shipped ROM first.
Click to expand...
Click to collapse
I've never heard of a 2.26.11 radio stack. Maybe it was taken from some t-mobile beta rom.
However we'll never know how it performed since you overwrote it
Bye
gomylle said:
I just flashed my phone from Cingular 2.26 Aku2.3 w/a2dp FULLY LOADED *BETA* to this one but i guess it did not work correctly. The phone works fine but there are no ekstra ringtone or program or anything like that. What could have happened?
Click to expand...
Click to collapse
The rom upgrade process didn't work. The rom was not installed. Try flashing the rom again.
To avoid problems you can try to extract the content of the rom executable in a folder (use winrar: right click on the exe and choose 'extract here') and run newromupdateutility_wizard_noid.exe from there
Re: Error 208
ghostb said:
The rom looks very promessing, but something goes wrong... I receive an error 208. Anybody any idea what means?
Who can help the newby?
Thanks in advance!
Click to expand...
Click to collapse
Sometimes the self-extracting archive doesn't work well. The problem is NOT related to the rom; it's just the self-extracting exe archive.
To avoid the problem you must extract the content of the rom exe in a folder (use winrar: right click on the exe and choose 'extract here') and run newromupdateutility_wizard_noid.exe from there.
Bye,
let me know how it goes...
gomylle said:
I just flashed my phone from Cingular 2.26 Aku2.3 w/a2dp FULLY LOADED *BETA* to this one but i guess it did not work correctly. The phone works fine but there are no ekstra ringtone or program or anything like that. What could have happened?
Click to expand...
Click to collapse
thats the rom i posted, i didnt include any extra ringers or theme's yet, risidoro's rom is different
shogunmark said:
gomylle said:
I just flashed my phone from Cingular 2.26 Aku2.3 w/a2dp FULLY LOADED *BETA* to this one but i guess it did not work correctly. The phone works fine but there are no ekstra ringtone or program or anything like that. What could have happened?
Click to expand...
Click to collapse
thats the rom i posted, i didnt include any extra ringers or theme's yet, risidoro's rom is different
Click to expand...
Click to collapse
Should you be at work...and if you are there shouldn't you be working
thankins said:
shogunmark said:
gomylle said:
I just flashed my phone from Cingular 2.26 Aku2.3 w/a2dp FULLY LOADED *BETA* to this one but i guess it did not work correctly. The phone works fine but there are no ekstra ringtone or program or anything like that. What could have happened?
Click to expand...
Click to collapse
thats the rom i posted, i didnt include any extra ringers or theme's yet, risidoro's rom is different
Click to expand...
Click to collapse
Should you be at work...and if you are there shouldn't you be working
Click to expand...
Click to collapse
i am at work shhhhh......
Finally a ROM with all bells and whistles. I'll try out soon and looking forward for an AKU3.2 version whenever it will be stable and working
risidoro said:
I've never heard of a 2.26.11 radio stack. Maybe it was taken from some t-mobile beta rom.
However we'll never know how it performed since you overwrote it
Bye
Click to expand...
Click to collapse
Dangit. I was afraid of that. I didn't even think to backup my ROMs first since when it first booted, I just looked at the number briefly and thought to myself, "Oh, it already has the latest TMobile ROMs". But I did take a moment to jot down the numbers anyway. Then, a while later, after loading the Xelencin ROM, I noticed the numbers were different.
I wonder if the Tmobile download site has an updated download, of if this version only comes with warrantee replacements...
If anyone else gets a warrantee replacement phone, perhaps we can get the new 2.26.11 radio stack. I had my MDA replaced because the stylus wouldn't stay in and kept getting lost. Anyone else with that problem could get TMoUSA to replace theirs too.
FutureShock's WM6.1 & extra Stuff -131DPI V1.61.0004.0 & 96DPI V2.61.0004.0 @24.04.08
Hi,
first of all thanks jerpelea to bring WM6.1 to MTeor...
heres my Version of WM6.1!
With lots of usefull Apps included!
please Note: V2.xx.xxxx.x is 96DPI and V1.xx.xxxx.x is 131DPI (Normal) Version
for HSDPA you need Radio ver. above 1.38...
96DPI:
current Ver.: 2.61.0004.0
Featurelist:
96 DPI Version of WM6.1 (260x320 Resolution)
extended Chome Plugin (CPhotoDialer, CMyApp, Settings - Battery, Hue, WM5torage (USB), WelcomeCenter)
slim CHOME
HTC3DMenu
Cyberon Voice Commander
RSS InfoFeed
T9 as in 131DPI + Czech
WM6.1 WWE - HSDPA enabled
Office 6
Windows Live
ConnTweak
TCPMP
AutoKeyLock
WM5torage
PHM Reg Edit
ClockOnTop
Esmertec Java Midlet Manager
OperaMini 4.1
changelog:
V2.61.0004.0:
- finally fixed 96DPI Threaded SMS bug (no Icons displayed in threaded SMS)
- fixed ActiveSync manuel settings set problem
- added HTC 3DMenu, Cyberon Voice Commander and RSS InfoFeed Tool
V2.61.0003.1:
- fixed 96DPI Threaded SMS bug (no Icons displayed in threaded SMS)
- fixed some Chome glitches (rearranged the icons and texts)
- removed useless Welcome Plugin from Home
- back on "old" 131DPI Commanager, Buttons didnt look good but all is working only optical glitches!!
- edited the MyApp Launcher Plugin
V2.61.0003.0:
- extended Chome Plugin (CPhotoDialer, CMyApp, Settings - Battery, Hue, WM5torage (USB))
- slimed down CHOME
- fixed T9 Icon
- added ClearStorage in Accessories
V2.61.0002.0:
- first public release of 96DPI Version
131DPI:
[SIZE=+2]current Ver.: 1.61.0004.0[/SIZE]
Featurelist:
WM6.1 WWE - HSDPA enabled
HTC3DMenu
Cyberon Voice Commander
RSS InfoFeed
GoogleMaps
Office 6
Windows Live
ConnTweak
TCPMP
AutoKeyLock
WM5torage
PHM Reg Edit
ClockOnTop
Esmertec Java Midlet Manager
OperaMini 4.1
T9(Danish, Dutch, Finnish,French, German, Greek,Italian,Norwegian,Portuguese, Spanish,Swedish,Czech ... more on request)
extended Chome Plugin (CPhotoDialer, CMyApp, Settings - Battery, Hue, WM5torage (USB), Welcome Center)
slim CHOME
changelog:
V1.61.0004.0:
- added HTC 3DMenu, Cyberon Voice Commander and RSS InfoFeed Tool and GoogleMaps
V1.61.0003.1:
- fixed some Chome glitches (rearranged the icons and texts)
- removed useless Welcome Plugin from Home
- edited the MyApp Launcher Plugin
V1.61.0003.0:
- extended Chome Plugin (CPhotoDialer, CMyApp, Settings - Battery, Hue, WM5torage (USB))
- slimed down CHOME
- added ClearStorage in Accessories
V1.61.0002.1:
- added T9 Czech fixed Spanish!
V1.61.0002.0:
- T9 tested, finally all should work!- did some change in ComManager to show whats possible!! (but i have problems to change the background of Commanger, but you have 12 Buttons now, but not all working yet...)- added a special HomeScreen "FutureShock", just test (its with ColorIconBar, i'm also working on Shadow HomeScreen but there are problems...)- Windows Live fully working, without to have install a CAB anymore!- deleted OfficeMobile duplicate links- added BubbleBreaker & Solitaire and made Links in StartMenu/Games-delete "Lock" Entry from "QuickList" so that it fits on one page! -> you can lock the device on long press on hang-off too!-i have enabled the STK-Service on startup again, because the Phone boots up faster when this is enabled... don't know why!!
V1.61.0001.5:
- T9 should be fixed, please test and report, i can't flash and test it!
V1.61.0001.0:
- first release...
explaination of Versionsteps: For small fixes i will raise the last digit, for biger fixes the 2nd from behind (like from nonMMS (V1.61.0000.x) > MMS (V1.61.0001.x)
[SIZE=+1]Installation Instructions:[/SIZE]
unrar all, and just connect MTEOR to your PC, make sure activesync is startet and connected/synced! Then start runme.bat and follow the screen!
For AppUnlocking there are several methods... in Wiki in regtweaks there is a description to unlock, and also to run unsigned apps... also i have attached a "SDA App Unlock Tool" in zip is also a "CheckLock.exe" that has to be run on Phone and show if it is applocked!
darkDirk said:
I am new and trying to upgrade it myself, but at first I didn't have any luck.
Now I have it working, so I made a simple newby step-by-step manual:
- Download and extract a MTeoR-FutureShock-WM61-xxxx.x.rar
- Check your Mteor battery in more then 50 % full
- connect the Mteor to the computer via usb and check if activesync works
- go with DOS (cmd line) to the directory and start runme.bat
- On the Mteor press camera and powerbutton at the same time.
- then immediately press any key on the computer to continue the batch script.
- now you should see the 3-color bootscreen
- press any key to start the rom-update program and follow
its directions. When the update is finished (in less then 5 minutes), then wait untill the first boot is complete.
If you don't get the 3-color bootscreen or you the update on the Mteor stays on 0 % and the rom-updater displays an error, try testing this:
On the Mteor start the explorer and in the root directory (press UP once) find SSPL.EXE en start it.
If the Mteor won't start the program and there is an error like "insufficient trustlevel".
You need to remove the application lock on your Mteor.
Run SDA_ApplicationUnlock.exe and install SP_AllowCertificateInstall.cab.
You will find it in ".\opt Software\Unlock Tools"
Then redo from the start.
I hope this helps.
P.S. I had a BREE100 with IPL-0.90 and SPL-2.05.
Click to expand...
Click to collapse
For a working CPhoneDialer you have to extract the CPhoneDialer.rar into your phone (Storage Card\Program Files\...) there are .lnk files... inside of them there are the phone numbers saved that you call!!
How to set up VOIP:
external link
Optional to Install:
CAB's in Archive:
Smarttoolkit
SM Neo Full Screen Theme + Iphone Theme (i think thats only working with Shadow NEO Plugin)
i have attached (on bottom of Thread) 3 very usefull apps (maybe i will insert it in rom in future)
- CallFirewall: Veryusefull app, you can manage Blacklists of Numbers that are automatically recjected!!
- Photocontacts: You can download that app directly from M$ too, this is a nice small PhotoContact management tooll.. just give it a try...
- FlashVideoBundle: used to watch eg. YouTube Videos with TCPMP Player! genius!!!
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Downloads:
SP3DEVS 7.77 SSPL
Radio Update: Radio Only 1.38 Radio Only 1.54.30.10 (some Users reported Problems with 1.54er Radio...)
131 DPI Version: 1.61.0004.0 Rapidshare D/L!
96 DPI Version: 2.61.000.4.0 Rapidshare D/L!
MMS is included? .. or is there some usable app?
Benefits of 96DPI Version:
To see the differences between 136 and 96DPI:
mms is working sofar as i can see... but i have problem in configuration window... i will check a solution for that, and then will release a rom where mms is in!
Whenever there is an incoming call, i cannot see the caller ID or the caller name (the caller exists in my address book), anyone face this problem with this version?
ivanlee said:
Whenever there is an incoming call, i cannot see the caller ID or the caller name (the caller exists in my address book), anyone face this problem with this version?
Click to expand...
Click to collapse
+1 from me. Outgoing calls correctly shows name, picture etc. from contacts but incoming calls do not show.
this release is based on an alpha A2 rom
BUGS
no incoming call caller id
control pannel
bluetooth not working
power not working
beam entry dubled
commanager bluetooth not working
messed XIP registry
sorry this was an test build
control panel is working on me...
also i found the fix for power management...
i'm fighting with mms... but no luck yet...
almost everithing is fixed
version A3 launched
Howto upgrade to wm6.1 for beginners
First of all:
It's fantastic what you are doing with wm6.1 and the Breeze, Futureshock !
I am new and trying to upgrade it myself, but at first I didn't have any luck.
Here is a simple newby step-by-step manual:
- Download and extract a MTeoR-FutureShock-WM61-xxxx.x.rar
- Check your Mteor battery in more then 50 % full
- connect the Mteor to the computer via usb and check if Activesync works
- go with DOS (cmd line) to the directory and start runme.bat
- On the Mteor press camera and powerbutton at the same time.
- then immediately press any key on the computer to continue the batch script.
- now you should see the 3-color bootscreen
- press any key to start the rom-update program and follow its directions.
When the update is finished (in less then 5 minutes), then wait untill the first boot is complete.
If you don't get the 3-color bootscreen or you the update on the Mteor stays on 0 % and the rom-updater displays an error, try testing this:
On the Mteor start the explorer and in the root directory (press UP once) find SSPL.EXE en start it.
If the Mteor won't start the program and there is an error like "insufficient trustlevel".
You need to remove the application lock on your Mteor.
Run SDA_ApplicationUnlock.exe on your PC with Activesync working and then install SP_AllowCertificateInstall.cab on the Mteor.
You will find those two in the .rar in ".\opt Software\Unlock Tools"
Then redo from the start.
Then, Have fun !! (Futureshock & DarkDirk)
P.S. works on a BREE100 with IPL-0.90 and SPL-2.05.
T9 isn't working correctly ...
hopefully i fixed that in 1.61.0001.5 !!
Please test for me because i don't won't to reflash my mteor because i have fully configured my device now... and i will not do that again...
so please report...
First I would like to thank you for bringing 6.1 to Breeze.
I have upgraded my breeze but it get's stuck on the bootloader screen. Any ideas?
Gorr75 said:
First I would like to thank you for bringing 6.1 to Breeze.
I have upgraded my breeze but it get's stuck on the bootloader screen. Any ideas?
Click to expand...
Click to collapse
On wich Screen did you mean exactly ?! 3 Color ?! or the BootupScreens (Mteor/futureshock) ???
just try reflashing the original rom for your device... (with correct CID)
then redo all steps, appunlock and start runme.bat ...
i released a new Version, some bugfixes in it! Also Live is working now without any Cab to install!!
darkDirk said:
First of all:
It's fantastic what you are doing with wm6.1 and the Breeze, Futureshock !
I am new and trying to upgrade it myself, but at first I didn't have any luck.
Now I have it working, so I made a simple newby step-by-step manual:
- Download and extract a MTeoR-FutureShock-WM61-xxxx.x.rar
- Check your Mteor battery in more then 50 % full
- connect the Mteor to the computer via usb and check if activesync works
- go with DOS (cmd line) to the directory and start runme.bat
- On the Mteor press camera and powerbutton at the same time.
- then immediately press any key on the computer to continue the batch script.
- now you should see the 3-color bootscreen
- press any key to start the rom-update program and follow
its directions. When the update is finished (in less then 5 minutes), then wait untill the first boot is complete.
If you don't get the 3-color bootscreen or you the update on the Mteor stays on 0 % and the rom-updater displays an error, try testing this:
On the Mteor start the explorer and in the root directory (press UP once) find SSPL.EXE en start it.
If the Mteor won't start the program and there is an error like "insufficient trustlevel".
You need to remove the application lock on your Mteor.
Run SDA_ApplicationUnlock.exe and install SP_AllowCertificateInstall.cab.
You will find it in ".\opt Software\Unlock Tools"
Then redo from the start.
I hope this helps.
P.S. I had a BREE100 with IPL-0.90 and SPL-2.05.
Click to expand...
Click to collapse
Wow! Thanx to you to!!
This is exactly what a n00b like me needs
Just a quick question that I have forgot all the time.. Does AS work in any release of WIM6/WIM6.1?
MobileSixx said:
Just a quick question that I have forgot all the time.. Does AS work in any release of WIM6/WIM6.1?
Click to expand...
Click to collapse
as is what??
futureshock said:
as is what??
Click to expand...
Click to collapse
Sorry, ActiveSync was what I meant.
MobileSixx said:
Sorry, ActiveSync was what I meant.
Click to expand...
Click to collapse
you need active sync 4.5
google for it
jerpelea said:
you need active sync 4.5
google for it
Click to expand...
Click to collapse
Once again I need to correct myself =)
ActiveSync IN the MteOR = Push mail....
MobileSixx said:
Once again I need to correct myself =)
ActiveSync IN the MteOR = Push mail....
Click to expand...
Click to collapse
syncing with exchange works...
the rights to test push mail i hopefully get in a few minutes in my company
Hey all..these are the files i extracted from Artemis WM 6.1 Rom ( Black and Blue by Tom )
1. Device Lock 1.0.0.1
2. HTC Album 1.0.1030.720
3. HTC Menu Settings
4. HTC Message 1.5.0.0
5. KeyLock 1.01
6. MicrophoneAGC 0.91
7. HTC Mouse Mode 1.12.0.0
8. New Mail Account 1.10.0.0
9. Power Property 1.15.0.0
10. ROM Settings
11. STK Tray
12. Storage Low
13. pShut XP ( with a veryyy cool Theme )
Attached Below are all the files in EXE format..which means that they Directly run without installing (for now only because i dont have WM 6 nor WM 6.1 so i cant test them )
Do let me Know which works and which doesent
bookmarked and will add tonigh after i hardreset my pda ather hahaha thx for the great stuffs
i will try tonight... thank ather
ather i have test it using my sd card but none of them working only some of them...
help out thx
ather i have test it using my sd card but none of them working only some of them...
help out thx
Please List the ones that dont work..
2. HTC Album 1.0.1030.720
3. HTC Menu Settings
4. HTC Message 1.5.0.0
6. MicrophoneAGC 0.91
7. HTC Mouse Mode 1.12.0.0
8. New Mail Account 1.10.0.0
9. Power Property 1.15.0.0
10. ROM Settings
11. STK Tray
12. Storage Low
13. pShut XP ( with a veryyy cool Theme )
here is the list, i test it ather thx
2. HTC Album 1.0.1030.720
3. HTC Menu Settings
4. HTC Message 1.5.0.0
6. MicrophoneAGC 0.91
7. HTC Mouse Mode 1.12.0.0
8. New Mail Account 1.10.0.0
9. Power Property 1.15.0.0
10. ROM Settings
11. STK Tray
12. Storage Low
13. pShut XP ( with a veryyy cool Theme )
here is the list, i test it ather thx
Click to expand...
Click to collapse
are they working or not working bobby.
dude leave your feedback correctly, now I am thinking are the ones in the list working or not working.
oh soo confuse!!
please let us know if the above list working.
many thanks
regards
Jay
Exactly..thats what im wondering also
boby1911 said:
2. HTC Album 1.0.1030.720
3. HTC Menu Settings
4. HTC Message 1.5.0.0
6. MicrophoneAGC 0.91
7. HTC Mouse Mode 1.12.0.0
8. New Mail Account 1.10.0.0
9. Power Property 1.15.0.0
10. ROM Settings
11. STK Tray
12. Storage Low
13. pShut XP ( with a veryyy cool Theme )
here is the list, i test it ather thx
Click to expand...
Click to collapse
all of them not working i tried one by one friends
gee dont get confused
pshut xp work
rom setting work
device lock work
keylock work
I decided to write this post, for help some one start to use HTC HD Mini (Photon), I have been used four HTC brands, I love these toy.
Sorry for my English, I live in Brazil, and Portuguese is my native language.
1) ROM – Customization to Portuguese:
- I bought my Photon in Brazil, but it was produced in Asia, and my official support is there, I download the last official ROM from HTC site (RUU_Photon_hTC_Asia_WWE _ .... .exe), and installed it.
- I recommend to make a hard reset.
- With the phone turned off, press and hold the VOLUME UP and VOLUME DOWN buttons, then press the POWER button shortly and release it.
- Press the VOLUME UP button to perform the hard reset.
- I download the last Portuguese ROM from the site http://forum.xda-developers.com/showthread.php?t=660897, thanks conflipper, I put it in a empty folder.
- I use the WinZip program in the file “RUU_Photon …exe”, function “Extract to here”, for extract the files, I copy the file "RUU_signed.nbh" in an empty folder.
- I download the “SSPL”, from the site http://forum.xda-developers.com/showthread.php?t=694409, thanks Cotulla, I put it in the same folder of the RUU_signed.nbh file, I extracted it with WinZip.
- I connected my Photon to USB computer port, I’m using Windows XP, SP3, and Microsoft ActiveSync (V. 4.5.0).
- I run the program DFT_SSPL_MINI.exe, the first time you run it, the Photon will ask you, if you want to install the program, click “yes”, at that point the program DFT_SSPL_MINI.exe “failed” in my computer, don’t worry, live the Photon in the three colors screen, running the Cotulla SSPL; run again the DFT_SSPL_MINI.exe, follow the program commands, wait until the program finish with success.
- I disconnected the USB cable, removed the Photon battery , and did a hard reset.
Remember this SSPL, only flash Splashes and OS images, the original Radio is not changed.
2) Programs I’m using:
- Internet browser: Opera 5.1, under JBlend, for quickly navigation.
- Internet browser: uZard WebP Ver. 2.0 (QVGA), for watch video.
- Skype for wm.
- CommonTime mNotes, for sync with LotusNotes.
- PHM RegEdit, registry editor.
3) Tip Enable cleartype:
- Run the PHM RegEdit program, and change the registry.
- HKLM\ControlPanel\Pen" then change the "Hide" key content from 1 to 0
- Screen control panel is available under "Sense Settings tab > Menu > More > System".
Enjoy,
malima17 said:
3) Tip Enable cleartype:
- Run the PHM RegEdit program, and change the registry.
- HKLM\ControlPanel\Pen" then change the "Hide" key content from 1 to 0
- Screen control panel is available under "Sense Settings tab > Menu > More > System".
Click to expand...
Click to collapse
Thats to enable the Screen control panel.