8125 AD2P - 8125, K-JAM, P4300, MDA Vario Software Upgrading

I have read, and read but I can't seem to find a place where I can download a ROM (or any other way) to get AD2P on my 8125. Please someone tell me where. Thanks

anyone out there have an answer?
I just bought the HT820 and all i can do is get the audio to go to the bluetooth headset via mono, and it is very very low quality.

Download latest WM6 cooked roms as they are prepared for it (at least i can hear stereo on my Sony)

MrCLean AKU2.3 does
I know WM5 roms aren't meant to do bluetooth stereo, but mine does. Been working nicely for sometime connecting to my belkin tunestage...

update: now working great on moto h820 headset
landwomble said:
I know WM5 roms aren't meant to do bluetooth stereo, but mine does. Been working nicely for sometime connecting to my belkin tunestage...
Click to expand...
Click to collapse
...mr clean aku 2.3 wm5 rom on wizard, no tweaks and sounding great right out of the box, and in stereo.

Related

Blue Angel - A2DP Bluetooth

Hi all
I have got Blue Angel:
ROM: 1.42.00 WWE
Radio: 1.13.00
BT: 3900
Last week I upgraded to the T-Movbile 1.42 Rom. I then installed the A2DP profile patch and was amazed that my Omiz OMS600 headphones were actually working using the high quality audio profile, and they were working very well.
The other day I did a hard reset to sort out a few things and left it at that. Later on when I came to reinstall my A2DP it wasn't working, nor was using the headphones as just a normal headset. I tried all sorts, including downgrading my ROM because at that point I was wondering whether or not it was actually on a previous version that I had it working.
Anyway... eventually I decided it was the headphones that had an error so emailed Omiz who were very helpful and sent me the download for their firmware flashing utility. This upgraded the ROM of my headphones from 1.06 to 1.25. I can now pair my headphones as a headset but not as High Quality Audio. I can get it to add a High Quality Audio shortcut in BT manager but when it trys to connect it says: "connection failed". Before it was also saying "service unavailable on device" or somthing similar.
Any assistance would be good.
Thanks a lot.
s_t_harvey said:
I then installed the A2DP profile patch and was amazed
Click to expand...
Click to collapse
Can you, please, tell me where to find this patch?
Someone knows if it works for wm5??
Thanks!
A2DP & WM5
Hi there,
I got the patch from: ftp://xda:[email protected] Upgrades/BT profiles for build 3500/
But I'm not sure if it will work on WM5, I think I have read that it will not, this is my main reason for not moving to WM5 yet... although at the moment while i can't get A2DP working I am not much better off.
How are you finding WM5? Is it reliable enough to compete with WM2003 yet, or is there still a bit of work needed?
It doesn't work under WM5. WM5 has a Microsoft bluetooth stack, this patch does not apply.
WM5 on the BA is quite stable if you have the time to work with it. I am not going back. If somebody comes up with a BT fix for the stand-by problem that does not drain the battery, all of my issues will be fixed.
A2DP on WM5
Thanks for that... I might consider upgrading one evening when I have nothing better to do!
Do you rekon we'll ever see A2DP on the MS bluetooth stack?
Re: A2DP on WM5
s_t_harvey said:
Thanks for that... I might consider upgrading one evening when I have nothing better to do!
Do you rekon we'll ever see A2DP on the MS bluetooth stack?
Click to expand...
Click to collapse
Yeah I think so. Apparently it's not out in the wild yet, but w/ BT 1.2, a lot of people will be looking to do more with it.
shuffle said:
WM5 has a Microsoft bluetooth stack, this patch does not apply.
Click to expand...
Click to collapse
Did you mean: "the mamaich rom has microsoft bluetooth stack". I really hope we can get WM5 with the same stack I had on w2003. (Broadcom, I think). Maybe it is out there but I can't see it...
shuffle said:
WM5 on the BA is quite stable if you have the time to work with it. I am not going back.
Click to expand...
Click to collapse
I agree. By the moment, I'm very pleased with the performance of WM5 on my BA. It actually runs faster than w2003! And I'm beeing very objective, believe me!
I'm having a big annoyance with writting (sms, word, etc) as the spelling isn't allways what I wrote. On the SMS window, it seems the screen gets redrawn all the time and it loose some words...
The other big is not having A2DP. I think is very frustrating having such a nice machine without a good software that makes all its goodness work! :?
Some delayings on the screen repainting and (I'm using Pocket Informant) slow performance on the everyday tasks as opening the contacts list, or changing toanother program, for example...
shuffle said:
If somebody comes up with a BT fix for the stand-by problem that does not drain the battery, all of my issues will be fixed.
Click to expand...
Click to collapse
What do you mean? To have the BT on a low-power mode more or less?
cheers...
looking 4 answers: ad2p & bluetooth & wm5
somebody with an answer to this theme?
WAS: ad2p & bluetooth & wm5
It is somehow possible?
Anybody there? :roll:
Answer is no, not possible yet.
And to the poster above - yes, just need the bluetooth connect issue solved where it drops connection when it goes into stand-by mode. The fix that drains the battery by keeping the unit out of standby mode really isn't a fix for me.
Not that I am complaining - I'm happy to be an early adopter along for the ride..
shuffle said:
Answer is no, not possible yet.
And to the poster above - yes, just need the bluetooth connect issue solved where it drops connection when it goes into stand-by mode. The fix that drains the battery by keeping the unit out of standby mode really isn't a fix for me.
Not that I am complaining - I'm happy to be an early adopter along for the ride..
Click to expand...
Click to collapse
some URLs????
Thanks!
How do I enable A2DP on my BA??
Hello!!
I have searched the forum many many times and visited wiki, but I could only find 2 threads which is close to what I need to know. This is 1 of them.
I have got Blue Angel:
ROM: 1.40.00 WWE
Radio: 1.12.00
BT: 3900
This configuration came from the recently rom upgrade from o2.
It seems to me that it's possible to enable A2DP on a BA running on WM2003 SE, which allows me to stream music to a bt headphones??
However I just could not find a thread which has an instruction on how to do it. Not even on wiki. After reading some threads, I came to my own conclusion that I need to upgrade me BT to build 3900 and install a patch??
So this was what I did,
Since my BT is already 3900 "offical" version, thus I didn't do anything to it.
I d/l this file BA_OEM_AudioGW (1.33g.00).CAB (83KB) and ran it on my PPC. I then got the audiogw.dll in my windows folder.
That was all I did. It didn't work of course. I have another file, BroadcomCorp_BT1.0.0.3900.cab but didn't use it as I'm already on 3900??
So I was just hoping that someone who has done it and was successful, could point me in the right direction!!! Thanks a lot!!!
anyone tried running both cab loacted at
ftp://ftp.xda-developers.com/BlueAn...age BT 1.0.0.3900 and audiogw.dll - 1.33g.00/
if it works, do let me know. I currently do not have a bluetooth headphones to test with.
I have Omiz headset (with MP3 and radio FM) and due to work with my Magician I had to manually change some registry entries. Point was that my PDA was not correctly identified as a A2DP device (only HF). I paired my PDA with normal BT dongle with A2DP profile, found registry entries with dongle mac adress and copied manually keys coressponding with a2dp service to folder with my headphones profiles. After all that it was possible to chose headphopnes in BT menager as stereo audio receiver.
Maybe its similar and u should look in registry...
jarekt, can you post those registryvalues please?!
Can't get streaming audio to BT headphones
I still have had no luck with the BA_OEM_AudioGW (1.33g 00) Cab or any registry settings under WM5.
BT a2dp WM5
have you tried the file (.cab) i uploaded in BlueAngel under uploads, it let me pair BT Stereo under wm5. Nevermind I looked someone deleted it dont know why. PM me and i can send if you want, I tried to reupload but Uploads appears broken.
I am on thesame situation of errorist.
My machine is on Broadcom 3900, and I want to make A2DP work.
If anyone can shed a light on how to make it work, I'd be very very grateful.
BTW, I have a Motorola HT820.
UPDATE:
I have installed the 3900 stack + audiogw dll even though I had a factory-installed 3900 stack, and I managed to connect in handsfree mode.
I still have not found out how to connect in A2DP mode though...
Any help is appreciated.
Hi All
I dont know how useful this is going to be, but i spent ages doing research to get my ht820 and my 02 xda 2s working properly, and when i did, i wrote a semi bad guide here
http://www.corecodec.com/index.php?option=com_smf&Itemid=29&expv=0&topic=2840.0
if its any use i'd be tempted to maybe write it up proper and put in in the wiki, either way, try some of the steps or files ive listed (most of them are from here)
but it gets it working with TCPMP aswell, which is a lot better than WM10 anyhow
good luck
BTW: ivans rom uses the broadcom stack, so the patch may work, however i dont have the headphones to test it with
i've onstalled this two cabs too, but new profile didn't appeared. Bay Be some registry values didn't appied? who did this patch?

PROBLEMS CONNECTING HT820 WITH A2DP - NEWEST 2.08 ROM INSTAL

Ok, I am trying to connect the ht820 stereo headset with my wizard but it will not play sound through the headset. I have the Cingular 2.08 Rom Loaded under bluetooth devices when I "refresh" it shows Headset and Handsfree. I have tried selecting both, and even a combination with no luck. The voice dial/phone functions of the headset work but not when I play music. I know the headset works because it plays music on my bluetooth laptop. Am I doing something wrong? Please help!
press the right ear button, and it will sync the phone to the headset, and start playing the music through the headset.
right button doesnt do anything when I press it. When I press left button it goes to voice speed dial.
Checked Bluetooth settings - Both Headset and Hands Free are Checked.
Any ideas?
wireless stereo needs to be enabled. does your ROM verson say 2.8.7.11? if not, you don't have A2DP.
hmm thats weird, during loadup OS reports 2.17 but i installed the 2.08 rom.??
Thanks for pointing that out to me though, I assumed since I installed the 2.08 rom it was running 2.08 wit a2dp.
i have 2.08 and the motoroma ht820 does work....somehow. I mean that i get evrw 20-50 secs interruptions for a fraction of a sec....the same to you? i tried various things (including Hard resets) but no success...
on 2.08, indeed, the bluetooth allows to have stereo headset, and the right earpad button does the rest.
Music through Bt ear bud
ok, i upgraded to new rom 2.17, this rom is excellent, battery life was beyond terrible before, now it is nothing short of OUTSTANDING... :lol:
Question, does this version support music through Bt earbud? I'd really like to have that feature... :roll:
Question, does this version support music through Bt earbud?
Click to expand...
Click to collapse
Some clever people have worked out how to extract the files for a2dp and install them into wizards, prophets etc.
See the thread in the main Wizard forum here: http://forum.xda-developers.com/viewtopic.php?t=48535 which direct to another post to download the files.
I have this working on my k-jam using wwe 1.16 rom and its great.
Cheers

8125-will changing ROMs let you use different headsets

I have the cingular 8125, and the jabra c220s doesnt work in stereo and the answer button doesnt work, this might be a dumb question for people who know alot about ROMs (i have the stock ROM right now), will upgrading the ROM make the headset work fully?
If the upgrade includes the Tornado A2DP patch it will. Note that the Tornado A2DP patch can be installed independently of a ROM update.
so you can apply that to the 2.17 ROM that summitter made?
As I understand it the ROM in this thread already has the Tornado A2DP applied.
ok cool, but it is a wired headset, and i think a2dp is for wireless, right?
OK -- I thought the Jabra was BT. If it's a wired headset, it's probably just a matter of using the proper adapter; the Wizard uses a 4-conductor 2.5mm jack. PocketPCTechs, Boxwave, and others sell adapters that might do the trick.
it is a 2.5 plug natively, maybe its a particularly defective one, ill try returnin it

BT headset unusable

Hello
A while a go, I upgraded successfully to wm2005. Since then, my ba works like a charm. Memory, BT, wifi,... all is going swell! The only aggravating point is I no longer can use my bt headset (jabra bt250v and jabra bt800). The problem is that there's so much disturbance that I cannot hear what people are saying and vice versa. I already upgraded the radio till the last version I could find on the ftp, but no luck.
Today I tried with other headsets (another jabra and another sonyericsson) and I have the same problem. But just now, I hooked it up with a sony ericsson bt carkit and the reception is flawless. Too bad that carkit wasn't mine ;-)
So I'm really at a loss here...
If any of you could help me out, I'd really appreciate it!
Thanks!
Beldin
Which rom are you using?
I'm using Helmi's 1.4 rom Vanilla version and it works great with my Bluespoon AX and i-Tech Clip Radio.
You might want to hard reset and flash the WM5 and Radio 1.15 rom again.
I have upgraded to the vanilla version, but the problem remains... (nice version btw!)
The following was also the case with the previous version: when I hold my ba very close to my headset, the cracking stops. Then I have not only my ba to my ear, but my headset in between
I also have a bt gps receiver, which works fine, no matter how far in my car.
So now I still wonder why my ba has such a bt audio problem...
try i-tech s35
beldin2000 said:
Hello
A while a go, I upgraded successfully to wm2005. Since then, my ba works like a charm. Memory, BT, wifi,... all is going swell! The only aggravating point is I no longer can use my bt headset (jabra bt250v and jabra bt800). The problem is that there's so much disturbance that I cannot hear what people are saying and vice versa. I already upgraded the radio till the last version I could find on the ftp, but no luck.
Today I tried with other headsets (another jabra and another sonyericsson) and I have the same problem. But just now, I hooked it up with a sony ericsson bt carkit and the reception is flawless. Too bad that carkit wasn't mine ;-)
So I'm really at a loss here...
If any of you could help me out, I'd really appreciate it!
Thanks!
Beldin
Click to expand...
Click to collapse
Hi Beldin2000,
i suggest you to use I-tech Clip s35 with Helmi AKU3.5/vanilla.No proplem so far the sounds great
cheers
Device:O2xda2s/Ba
ROM Version:Helmi AKU3.5 Vanilla
Radio Version:1.15

No bluetooth handsfree with cooked roms

When I flash my HD with a 1.56 cooked rom, I'm unable to connect with my handsfree. I can pair with the handsfree through bluetooth but I can not hear or speak to anyone.
If I flash with the stock HTC 1.56 rom, I can pair and talk through the handsfree.
Is there a fix for this? I've tried several cooked roms and the outcome is the same.
Thanks!
backstep said:
When I flash my HD with a 1.56 cooked rom, I'm unable to connect with my handsfree. I can pair with the handsfree through bluetooth but I can not hear or speak to anyone.
If I flash with the stock HTC 1.56 rom, I can pair and talk through the handsfree.
Is there a fix for this? I've tried several cooked roms and the outcome is the same.
Thanks!
Click to expand...
Click to collapse
I have DavidEuck 8.5 running and the bluetooth handsfree with my JVC carkit works fine. Can you try to pair with another bluetooth handsfree set and see if thats works fine? I would recommend at least upgrading to the latest radio.
backstep said:
When I flash my HD with a 1.56 cooked rom, I'm unable to connect with my handsfree. I can pair with the handsfree through bluetooth but I can not hear or speak to anyone.
If I flash with the stock HTC 1.56 rom, I can pair and talk through the handsfree.
Is there a fix for this? I've tried several cooked roms and the outcome is the same.
Thanks!
Click to expand...
Click to collapse
i have the same problem with most of the cooked roms specilly some times i can not hear the voice of other party this problem arrises with Miri's rom that i like it and Duty's rom that is very famous
for me stock roms and kwbr rom works fine
i have tested 3 devices Motorlla car kit, the expensive new Nokia sterio bluetooth headphone and sony erecsson sterio bluetooth head phone they all have problem with some cooked roms; i hope i can find a wm 6.5 rom that does not have this problem specially with good memory management like miri and kwbr that doesn't eat lots of memory.
Me, too. I am using daviddeuck v6. After 3 weeks sometimes it works and sometimes I cannot hear the other party.
I tried 2 jabra models with the same results.
Same issue
I had the same issue with my parrot 3200LS and Dutty's extreme 2.2/ Laurentius26's L26_THDV2.2_Ultimate Roms.
I even tried JETware Hands-free Extension for Windows Mobile phones (http://www.jetwaremobile.com) --supercool program btw!
But all to no extent.
Reflashing back to Laurentius26's L26_THDV7.5_WWE CE OS 5.2.20769 (Build 20769.1.4.5 L26) ROM "solved" the problem for me.
Now I get my phone's ringtones through my parrot (and thus my car-hi speakers ). Hope the problem is solved in newer roms...
(Btw, great job with your ROMs guys!! )
Y
Happens to me to.
ROM:
dutty v3.4
perhaps we could make a List of working/not worling Roms.
For me it's an essential feature for ROM choice.
Epecially bought a Radio for this feature...
Almost same for me.
Duttys v 3.4 ROM
Ford Car Kit (just talk, no music) connects and works without any problems.
iTech Clip R35 (A2DP, AVRCP) will not pair at all.
(I don't know if the profiles mean anything. Just remembered that there was a lot of talk about supported profiles in the R35 manual.)
brgds
Royan
Use Onkologs Lite-Rom and it works perfect.
I found i couldnt pair my phone with a few handsfree devices i was testing in a shop - seems there is a problem with the bluetooth stack and the newer roms. Odd this hasnt been reported sooner
i feel there is a problem with the configuration between windows and manilla some where or the driver for blue tooth is not complete that is why it loses the connection somewhere for most of the cooked roms
I agree, there must be something wrong with the bluetooth stack.
When I use a 1.14 ROM, I can hear and speak to people through my hands-free. But, when I flash a 1.56 ROM all I get is "dead air" when I answer a call through my hands-free.
I've tried flashing to Dutty's, Miri's, Laurentius26's, Topix's and a few other rom's, with the same result, I am unable to hear & talk to the other person on my hands-free.
I also tried updating to the 1.14 radio and I've tried older radio's and I still have the same problem.
Starting July 1st, my state will require drivers to use hands-free devices when dialing and driving.
backstep said:
I agree, there must be something wrong with the bluetooth stack.
When I use a 1.14 ROM, I can hear and speak to people through my hands-free. But, when I flash a 1.56 ROM all I get is "dead air" when I answer a call through my hands-free.
I've tried flashing to Dutty's, Miri's, Laurentius26's, Topix's and a few other rom's, with the same result, I am unable to hear & talk to the other person on my hands-free.
I also tried updating to the 1.14 radio and I've tried older radio's and I still have the same problem.
Starting July 1st, my state will require drivers to use hands-free devices when dialing and driving.
Click to expand...
Click to collapse
after trying almost all the new roms i returned back to the latest stock rom (28-4-2009) Bluetooth and every thing works absolutely perfect and it has got excellent memory management (only 32% with full loaded program), i use this rom when i want to rely on my HD.
by the way i think all the kwbr roms also works fine with bt. i wish i can find a 6.5 rom that works fine with blue tooth and has got good memory managemt, just waiting may be miri will do something, his rom got good memory management that is very imprtant for me
After the "SD card not shown", this is another weird report by using cooked ROM
has anyone got bluetooth devices to pair with a cooked 6.5 ROM ?
if not this is a pretty major problem ??
Yes I have.
I just got Miri's V15 pairing with my factory fitted Range Rover bluetooth kit and it works perfectly including giving access to the address book.
Previously I was using WM6.1 and many of Dutty's ROMs and I had intermittent drop outs with the car and phone.
Miri's ROM has upgraded my radio so I can't be sure if WM6.5 fixed the problem or if it was the new radio, but for the first time in 6 months I actually have a working hands free kit in my car
Royan said:
Almost same for me.
Duttys v 3.4 ROM
Ford Car Kit (just talk, no music) connects and works without any problems.
iTech Clip R35 (A2DP, AVRCP) will not pair at all.
(I don't know if the profiles mean anything. Just remembered that there was a lot of talk about supported profiles in the R35 manual.)
brgds
Royan
Click to expand...
Click to collapse
Well, that's me fixed...
Both car and iTech Clip works with Duttys 3.7/2.1 ROM.
And I'm ashamed to say; that the clip didn't connect earlier was my fault...
I used default code 0000 as stated in iTech's documentation, not the real default code of 8888...
Once I used the correct code, all was well...
brgds
Royan
I am using now Laurentius 2.1. My bluetoothheadset that suports only handsfree talking works properly. With my Jabra BT8010 only stereo music works, handsfree is a game of luck.
Hope any ROM expert will fix this in the future. For me it is one of the most important features of my TOUCH HD.
working!
Hi,
yesterday I flashed to Duttys 3.9 Turbo - and I love it!
BT works as A2DP & Handsfree!
beside it's very fast - what else we need
frottage said:
has anyone got bluetooth devices to pair with a cooked 6.5 ROM ?
if not this is a pretty major problem ??
Click to expand...
Click to collapse
Using Energy's 6.5 june 16th version.. Works PERFECT with my brand new Nokia BH-904 (which also is great)
it works in miri's rom as well plus you have lots of free memory when you really need it

Categories

Resources