When I flash my HD with a 1.56 cooked rom, I'm unable to connect with my handsfree. I can pair with the handsfree through bluetooth but I can not hear or speak to anyone.
If I flash with the stock HTC 1.56 rom, I can pair and talk through the handsfree.
Is there a fix for this? I've tried several cooked roms and the outcome is the same.
Thanks!
backstep said:
When I flash my HD with a 1.56 cooked rom, I'm unable to connect with my handsfree. I can pair with the handsfree through bluetooth but I can not hear or speak to anyone.
If I flash with the stock HTC 1.56 rom, I can pair and talk through the handsfree.
Is there a fix for this? I've tried several cooked roms and the outcome is the same.
Thanks!
Click to expand...
Click to collapse
I have DavidEuck 8.5 running and the bluetooth handsfree with my JVC carkit works fine. Can you try to pair with another bluetooth handsfree set and see if thats works fine? I would recommend at least upgrading to the latest radio.
backstep said:
When I flash my HD with a 1.56 cooked rom, I'm unable to connect with my handsfree. I can pair with the handsfree through bluetooth but I can not hear or speak to anyone.
If I flash with the stock HTC 1.56 rom, I can pair and talk through the handsfree.
Is there a fix for this? I've tried several cooked roms and the outcome is the same.
Thanks!
Click to expand...
Click to collapse
i have the same problem with most of the cooked roms specilly some times i can not hear the voice of other party this problem arrises with Miri's rom that i like it and Duty's rom that is very famous
for me stock roms and kwbr rom works fine
i have tested 3 devices Motorlla car kit, the expensive new Nokia sterio bluetooth headphone and sony erecsson sterio bluetooth head phone they all have problem with some cooked roms; i hope i can find a wm 6.5 rom that does not have this problem specially with good memory management like miri and kwbr that doesn't eat lots of memory.
Me, too. I am using daviddeuck v6. After 3 weeks sometimes it works and sometimes I cannot hear the other party.
I tried 2 jabra models with the same results.
Same issue
I had the same issue with my parrot 3200LS and Dutty's extreme 2.2/ Laurentius26's L26_THDV2.2_Ultimate Roms.
I even tried JETware Hands-free Extension for Windows Mobile phones (http://www.jetwaremobile.com) --supercool program btw!
But all to no extent.
Reflashing back to Laurentius26's L26_THDV7.5_WWE CE OS 5.2.20769 (Build 20769.1.4.5 L26) ROM "solved" the problem for me.
Now I get my phone's ringtones through my parrot (and thus my car-hi speakers ). Hope the problem is solved in newer roms...
(Btw, great job with your ROMs guys!! )
Y
Happens to me to.
ROM:
dutty v3.4
perhaps we could make a List of working/not worling Roms.
For me it's an essential feature for ROM choice.
Epecially bought a Radio for this feature...
Almost same for me.
Duttys v 3.4 ROM
Ford Car Kit (just talk, no music) connects and works without any problems.
iTech Clip R35 (A2DP, AVRCP) will not pair at all.
(I don't know if the profiles mean anything. Just remembered that there was a lot of talk about supported profiles in the R35 manual.)
brgds
Royan
Use Onkologs Lite-Rom and it works perfect.
I found i couldnt pair my phone with a few handsfree devices i was testing in a shop - seems there is a problem with the bluetooth stack and the newer roms. Odd this hasnt been reported sooner
i feel there is a problem with the configuration between windows and manilla some where or the driver for blue tooth is not complete that is why it loses the connection somewhere for most of the cooked roms
I agree, there must be something wrong with the bluetooth stack.
When I use a 1.14 ROM, I can hear and speak to people through my hands-free. But, when I flash a 1.56 ROM all I get is "dead air" when I answer a call through my hands-free.
I've tried flashing to Dutty's, Miri's, Laurentius26's, Topix's and a few other rom's, with the same result, I am unable to hear & talk to the other person on my hands-free.
I also tried updating to the 1.14 radio and I've tried older radio's and I still have the same problem.
Starting July 1st, my state will require drivers to use hands-free devices when dialing and driving.
backstep said:
I agree, there must be something wrong with the bluetooth stack.
When I use a 1.14 ROM, I can hear and speak to people through my hands-free. But, when I flash a 1.56 ROM all I get is "dead air" when I answer a call through my hands-free.
I've tried flashing to Dutty's, Miri's, Laurentius26's, Topix's and a few other rom's, with the same result, I am unable to hear & talk to the other person on my hands-free.
I also tried updating to the 1.14 radio and I've tried older radio's and I still have the same problem.
Starting July 1st, my state will require drivers to use hands-free devices when dialing and driving.
Click to expand...
Click to collapse
after trying almost all the new roms i returned back to the latest stock rom (28-4-2009) Bluetooth and every thing works absolutely perfect and it has got excellent memory management (only 32% with full loaded program), i use this rom when i want to rely on my HD.
by the way i think all the kwbr roms also works fine with bt. i wish i can find a 6.5 rom that works fine with blue tooth and has got good memory managemt, just waiting may be miri will do something, his rom got good memory management that is very imprtant for me
After the "SD card not shown", this is another weird report by using cooked ROM
has anyone got bluetooth devices to pair with a cooked 6.5 ROM ?
if not this is a pretty major problem ??
Yes I have.
I just got Miri's V15 pairing with my factory fitted Range Rover bluetooth kit and it works perfectly including giving access to the address book.
Previously I was using WM6.1 and many of Dutty's ROMs and I had intermittent drop outs with the car and phone.
Miri's ROM has upgraded my radio so I can't be sure if WM6.5 fixed the problem or if it was the new radio, but for the first time in 6 months I actually have a working hands free kit in my car
Royan said:
Almost same for me.
Duttys v 3.4 ROM
Ford Car Kit (just talk, no music) connects and works without any problems.
iTech Clip R35 (A2DP, AVRCP) will not pair at all.
(I don't know if the profiles mean anything. Just remembered that there was a lot of talk about supported profiles in the R35 manual.)
brgds
Royan
Click to expand...
Click to collapse
Well, that's me fixed...
Both car and iTech Clip works with Duttys 3.7/2.1 ROM.
And I'm ashamed to say; that the clip didn't connect earlier was my fault...
I used default code 0000 as stated in iTech's documentation, not the real default code of 8888...
Once I used the correct code, all was well...
brgds
Royan
I am using now Laurentius 2.1. My bluetoothheadset that suports only handsfree talking works properly. With my Jabra BT8010 only stereo music works, handsfree is a game of luck.
Hope any ROM expert will fix this in the future. For me it is one of the most important features of my TOUCH HD.
working!
Hi,
yesterday I flashed to Duttys 3.9 Turbo - and I love it!
BT works as A2DP & Handsfree!
beside it's very fast - what else we need
frottage said:
has anyone got bluetooth devices to pair with a cooked 6.5 ROM ?
if not this is a pretty major problem ??
Click to expand...
Click to collapse
Using Energy's 6.5 june 16th version.. Works PERFECT with my brand new Nokia BH-904 (which also is great)
it works in miri's rom as well plus you have lots of free memory when you really need it
Related
Hi all,
first wanted to say that it is a great forum.
I just came across it couple days ago, and there has been many things that I found here that improved my Qtek 2020i.
but there is one thing that i havent found in here.
I use tomtom 5.21 with a bluetooth GPS receiver. it worked fine until I bought a bluetooth headset. If im using TT to navigate and answer a call via bluetooth headset it works fine, but when i hung up the call, then Qtek looses connection to GPS, then picks it up again in about 10 seconds but runs with a big delay. I have to restart tomtom and then it is back to normal (quite annoying when driving thru town)
any of you have that problem??
thanks for help.
Hi there,
My problem might be related : the device seems unable to use both the headset and the GPS (with TT) at the same time. I don't know why. I've got a Qtek ROM at the moment, I'll see if the latest O2 ROM with upgraded radio stack does any good.
See you.
Right. Just switched to PUG's .162 ROM with O2 stuff stripped.
Alas, it comes with Broadcom stack and there's no SPP inside so I can't connect to my GPS ... Pug if you read this, help
Cheers !
seems strange: I replashed my stock O2 bloatware & buggy 169 Rom with pug's flavour, to give me the 162 rom and Radio version 1.04.
My GPS bonds fine tihe BT, and I can use TomTOm and a BT headset at the same time. Did you flash the Radio to the (far better) 1.04) when you upgraded the Rom?
I've heard quite a few people say on these forums that for Alpine, one of the most stable & speedy setups is the 1.10 WWE Main Rom, the .162 Pug rom with the O2 stuff stripped out, and the 1.04 Radio.
Joe
Yeah actually it works fine now. I made another post while I was looking for help, because the Alpine wouldn't find the SPP service when interrogating the GPS. I simply switched the GPS off and back on, and the problem was gone. I wish I'd tried that before the dozen ROM combinations I spent the afternoon testing
And indeed, I'm now running 1.11WWE/1.04.00/1.11.162 PUGS w/o O2 stuff, and finally TT accepts to work with the headset while using the GPS. What a trip !
Cheers !
Hello
A while a go, I upgraded successfully to wm2005. Since then, my ba works like a charm. Memory, BT, wifi,... all is going swell! The only aggravating point is I no longer can use my bt headset (jabra bt250v and jabra bt800). The problem is that there's so much disturbance that I cannot hear what people are saying and vice versa. I already upgraded the radio till the last version I could find on the ftp, but no luck.
Today I tried with other headsets (another jabra and another sonyericsson) and I have the same problem. But just now, I hooked it up with a sony ericsson bt carkit and the reception is flawless. Too bad that carkit wasn't mine ;-)
So I'm really at a loss here...
If any of you could help me out, I'd really appreciate it!
Thanks!
Beldin
Which rom are you using?
I'm using Helmi's 1.4 rom Vanilla version and it works great with my Bluespoon AX and i-Tech Clip Radio.
You might want to hard reset and flash the WM5 and Radio 1.15 rom again.
I have upgraded to the vanilla version, but the problem remains... (nice version btw!)
The following was also the case with the previous version: when I hold my ba very close to my headset, the cracking stops. Then I have not only my ba to my ear, but my headset in between
I also have a bt gps receiver, which works fine, no matter how far in my car.
So now I still wonder why my ba has such a bt audio problem...
try i-tech s35
beldin2000 said:
Hello
A while a go, I upgraded successfully to wm2005. Since then, my ba works like a charm. Memory, BT, wifi,... all is going swell! The only aggravating point is I no longer can use my bt headset (jabra bt250v and jabra bt800). The problem is that there's so much disturbance that I cannot hear what people are saying and vice versa. I already upgraded the radio till the last version I could find on the ftp, but no luck.
Today I tried with other headsets (another jabra and another sonyericsson) and I have the same problem. But just now, I hooked it up with a sony ericsson bt carkit and the reception is flawless. Too bad that carkit wasn't mine ;-)
So I'm really at a loss here...
If any of you could help me out, I'd really appreciate it!
Thanks!
Beldin
Click to expand...
Click to collapse
Hi Beldin2000,
i suggest you to use I-tech Clip s35 with Helmi AKU3.5/vanilla.No proplem so far the sounds great
cheers
Device:O2xda2s/Ba
ROM Version:Helmi AKU3.5 Vanilla
Radio Version:1.15
I have read, and read but I can't seem to find a place where I can download a ROM (or any other way) to get AD2P on my 8125. Please someone tell me where. Thanks
anyone out there have an answer?
I just bought the HT820 and all i can do is get the audio to go to the bluetooth headset via mono, and it is very very low quality.
Download latest WM6 cooked roms as they are prepared for it (at least i can hear stereo on my Sony)
MrCLean AKU2.3 does
I know WM5 roms aren't meant to do bluetooth stereo, but mine does. Been working nicely for sometime connecting to my belkin tunestage...
update: now working great on moto h820 headset
landwomble said:
I know WM5 roms aren't meant to do bluetooth stereo, but mine does. Been working nicely for sometime connecting to my belkin tunestage...
Click to expand...
Click to collapse
...mr clean aku 2.3 wm5 rom on wizard, no tweaks and sounding great right out of the box, and in stereo.
OK, so I have a headunit w/ bluetooth capability. Basically when you get in the car it syncs w/ your phone, and lets you answer hands free, talk through and hear through the car itself. My problem is although the headunit finds the device, it cant sync. I get instant error. MY friend has the same phone, but diff radio version etc, and he can sync to it fine.
I am on dutty's dual touch rom
These are the #'s I see when I start up my phone
1.64.08.21
25.74.40.02w
3.08.00.00
1.) can I update the bluetooth through a rom (radio or separate?)
2.) am I using the right roms, or should I be looking to upgrade them?
Wow you would figure someone could have answered this....
Well I changed my rom to Deathv2, instead of dutty's rom, and now I can sync up with my car. Looks like its a problem with dutty's rom.
I've been having some issues with my Tilt and my car's hands free setup (see: http://forums.wireless.att.com/cng/board/message?board.id=cingular&message.id=105410). The problems seems to lie with the Microsoft bluetooth stack on WM 6.1. HTC is no help with this issue so I want to take matters into my own hands. Is there a way to replace the default Microsoft bluetooth stack with another, more reliable compatible stack from a reliable company (not Microsoft or HTC)? I don't want to get rid of my Tilt, but I need it to work right in my car. I'm thinking of staying away from purchasing WM 6.1 smartphones because of this.
frustrated...
Wow, no one has answered my post here, at ATT, at Kenwood, or on tiltsite. HTC answered only to tell me that compatibility doesn't necessarily mean that it would work (bs). This is very frustrating. I've read post all over xda developers and the rest of the internet about tilt bluetooth problems yet no one has an answer. I've completely giving up on trying to get bluetooth to work right with any of my devices (car, computer, etc). I can't imagine buying another HTC product. Good luck to everyone else out there struggling to get bluetooth to work on their tilt while the motorola, blackberry, lg, samsung, and other phone users watch with amazement and pity. Keep fighting the good fight. Hopefully one of you will win. I've completely lost!
That's a pretty strange story you've got there, because I have zero problems with my Tilt and bluetooth pairing to all manners of devices... on a regular basis, I connect my Tilt to my car's Pioneer stereo deck, to my laptop and desktop, and to my wireless headphones and I've had little to no difficulty. Actually, the easiest pairings so far have been between my Tilt and Pioneer Stereo Deck... At least for basic features - in order for the phone book entries to show on the deck's LCD display it required an upgrade from WinMo 6.0 to 6.1 and then in the deck itself I have to manually download the contact book. But that's the only troublesome thing I have to do, which is mostly an advanced feature any way that I could live (but prefer not to) without.
Sucks that you're having problems, all I can suggest is make sure you're doing everything properly... I've had no problems I couldn't overcome with my Tilt and bluetooth capable devices, especially since Windows Mobile 6.1 came out.
Hi,
I'm having the same problems, also when disconnecting from the BT carstereo after a phonecall, the device freezes up.
Anybody found a solution for this problem yet ?
Ny the way, my car stereo is a JVC KD-BT1
GRTZ,
Niels
@k4ever: Have you checked out this thread?
http://forum.xda-developers.com/showthread.php?t=285419
From what I can tell, they've ported the Widcomm BT stack to the Hermes and TyTN, so I imagine it's not far off from the Kaiser/TyTN-II, if it doesn't already work (my BT is working fine, so I'm not too likely to mes with my phone to find out-- but I hope this helps!)
-Weasel5i2
EDIT: Here's a CAB from the newer threads of the above post:
http://rs38.rapidshare.com/files/30721150/broadcomm_bt_stack.CAB
Thanks
Wow, thanks for the replies.
@ceosion
I got it working with a Pioneer deck in Best Buy. I was actually debating buying one, but I paid $500 for my Kenwood setup. All of my other phones work with it, to include other WM phone (not from HTC). I contacted Kenwood, but I have not recieved a reply.
@Weasel5i2
I tried the Widcomm stack when I used the stock ATT rom. It completely disabled bluetooth on the Tilt. I will try it with the PDA Corner rom I'm currently using (the best!) after the holiday weekend.
Thanks again for the replies!
k4ever said:
Wow, thanks for the replies.
@ceosion
I got it working with a Pioneer deck in Best Buy. I was actually debating buying one, but I paid $500 for my Kenwood setup. All of my other phones work with it, to include other WM phone (not from HTC). I contacted Kenwood, but I have not recieved a reply....
Click to expand...
Click to collapse
I am experiencing Bluetooth connection issues between the Tytn2 and a kenwood DNX8220BT As far as I've heard from kenwood the Tytn2 is only supported with the older version of Windows Mobile (6.0)
I've also tried the Kenwood with my wife's Touch Diamond (Also HTC but other CPU, don't know about the BT radio though) but that one is also experiencing trouble. I didn't get any indication when they would have a new firmware version ready.
You did indicate that you also tried another WM phone, which version of WM does that one operate on?
@Mautje
The other WM phone was a Samsung Blackjack II running WM 5. I downgraded my Tilt to the default WM 6 Rom from ATT, but I had the same problems. I'm running the PDA Corner WM 6.1 Rom now. Does matter which ROM I use, I get the same results on the Tilt.
widcomm stack a no-go
I tried the Widcomm stack. It did not work at all. Kept getting error that "there was not enough memory to run, please reset device" or something to that nature. Could not uninstall so I had to re-flash my ROM. Back to square one.
k4ever said:
The other WM phone was a Samsung Blackjack II running WM 5. I downgraded my Tilt to the default WM 6 Rom from ATT, but I had the same problems. I'm running the PDA Corner WM 6.1 Rom now. Does matter which ROM I use, I get the same results on the Tilt.
Click to expand...
Click to collapse
To bad. I was also looking into the other roms on this forum but it wil probably not work..
Kenwood is reporting that it should work with the rom version mentioned in the compatibility sheet.
In the sheet for version 1.43 firmware there is no mention at all of a rom version just the Tytn2.. I guess that's the WM 6.0 version