Upgrade bluetooth roms? - Tilt, TyTN II, MDA Vario III General

OK, so I have a headunit w/ bluetooth capability. Basically when you get in the car it syncs w/ your phone, and lets you answer hands free, talk through and hear through the car itself. My problem is although the headunit finds the device, it cant sync. I get instant error. MY friend has the same phone, but diff radio version etc, and he can sync to it fine.
I am on dutty's dual touch rom
These are the #'s I see when I start up my phone
1.64.08.21
25.74.40.02w
3.08.00.00
1.) can I update the bluetooth through a rom (radio or separate?)
2.) am I using the right roms, or should I be looking to upgrade them?

Wow you would figure someone could have answered this....
Well I changed my rom to Deathv2, instead of dutty's rom, and now I can sync up with my car. Looks like its a problem with dutty's rom.

Related

O2 XDA IIi Bluetooth with Bluetooth Car Kit Issues.

Hi Guys,
Recent got an XDA IIi after being with the older XDA II for over 16 Months.
But I have recently run into problems with my BT Car kit :
Motorola Bluetooth Car Kit HFW-8000.
Basically the problem is that it does not always connect to the Car Kit and when it does it will only from time to time connect and let me have a handfree conversation.
I have also used the Broadcom Bluetooth Cab file here in order to extend what Bluetooth Profiles that can be used but seems not to have any great bearing to stablize the issue.
So I went down the Hard Reset Road but again still intermittent issues, I then upgraded the ROM to the New one on the O2 Website the v 1.11.169 ROM.
I also had similar issues with the XDA II but it was resolved by using the Pocket Bluetooth tools, which was great and never once after installing it did I have any issues with the Car Kit.
http://www.bluetooth.jazztel.es/
One of my questions is, is there a similar programme to to above Pocket Bluetooth tools for the XDA IIi as I have tried it with the XDA IIi but does not work.
Or does anyone know how you would revert to have the XDA II radio or is there a work around for it.
Thanks Guys
Woody
Hi Woody_XDA,
I have had my XDA2i for a couple of months now and recently got a O2 blue headset for it, I had simular problems with the headset disconnecting and having to manually connect every time I switched it on. After browsing this wonderfull forum I decided to do a corperate install and get rid of the O2 active interface, since then no problems at all. I now use Pugs modified ROM version 162 with radio 1.04 and have no stability problems at all with no twice weekly reset. Hope this helps you and many thanks to Pug for his ROM.
Mace
Ditto, I also use the custom firmware with 1.04 radio and bluetooth works a charm. It still eats battery like nothing else, but it works with no problems. Also like the fact that the XDA can cope with my GPS receiver and my handsfree kit simultaneously, that's handy for in the car.
Cheers Guys for the information, took it on board and works great, did a great deal of stress testing in order to confirm it and works excellent..Thanks to PUG again and guys thanks for the info much appreciated and this is by far a great forum
Mace - you mention some bluetooth issues being resolved since you applied the custom ROM... I posted in the Alpine Applications forum here the other day a list of issues with bluetooth that I was wondering had been addressed - so far no reply - are these the symptoms that were cured for you??
Hi Bewlay Brother sorry, I missed your other post on Bluetooth issues, my original problem was that every time I switched on my BT headset , which is a O2 Blue, I had to open the BT manager and make the connection, the phone would then occasionally lose the connection and sometimes whilst still showing a connection refuse to transfer the call. This was using the official 162 ROM with the O2 active UI. I have since installed Pugs 162 ROM with radio1.04 and done a corporate install and BT seems to work perfectly, switch on the headset, it connects, never loses pairing and transfers calls.
Hope this helps you, and thanks again to Pug,
Mace.
Mace - what you describe sounds similar - my problems were essentially the loss of pairing with my Motorola headset a lot of the times when the XDAIIi switched off its display and went into stand-by mode, also if I closed the boom bike on the headset (to temporarily turn off the headset) it would fail to re-pair when I next opened the boom mike... the other issue was that I had to make sure the phone keyboard was displayed on the XDA once I had paired up otherwise the last number redial function on the headset would not work - if I pressed the dial button on headset and the phone display was not on the screen it would simply open the phone display function but fail to then dial the number - really crap. Also reception was poor to headset even over relatively short distances from the XDA. IF these areas in particular could be cured by the upgrade then I am eager to do it - I must admit I have read that this upgrade has not been without problems for some people here so it is going to be a tough call.
Just a thought, but have you done a personal or corporate install as I think the main fix with Pugs ROM was the upgrade to radio 1.04, which I don’t think affects the BT, so a corporate install with your existing ROM may make a difference.
Did a corporate install when it was new out of the box...
whats the difference between the corporate and personal install?
Corporate doesn't install ANY of the branded O2 interface - so no gubbins, nothing to slow down the phone, you just get a bog standard Windows Mobile 2003 SE installation, aside from the O2 GPRS and SMS settings. Bosh.
hi
i've been reading the posts and i have the same problem where can i get hold of pug's ROM if it's possible cos this seems to get rid of the problem
And then today, headset will not automatically connect, needing Bluetooth manager to be opened to make the connection. AARRRGH!
BT car kit problems
I have the 1.04 Radio, but it still won't sync with my 2003 BMW 325xi bluetooh or with my 2005 Acura MDX bluetooth.
Help!
Unstable Bluetooth Signal Strength - Samsung WEP200 Bluetooth Headset
Hi, I just got a Samsung WEP200 Bluetooth Headset. It would pair with my O2 XDAIIi but I cannot hear any voice in both incoming and outgoing calls. When I check the BT Manager, it shows a totally unstable BT strength that varies from very strong to very weak. The same headset worked well with other BT phones. My ROM version is 1.11.00 WWE, Radio version 1.04.00.
Any help would be greatly appreciated.

ATT Tilt bluetooth BMW

Anyone with a BMW and a Tilt here? Does your bluetooth work in the car? I have a '05 BMW 645 and I flashed the Tilt with Hyperdragon's rom. Thanks
I think the Kaiser rom is not compatible with BMW's bluetooth. Is there a custom ATT rom out there with all the cool stuff like the Kaisers?
wrong...at the comment above
i own a 2008 BMW 528i and i gotta synced at the dealership.
im using the Jabra BT 8010 and no issues to report to date.
keep trying, check ur manual, and when all else fails go to the dealership.
EDIT:
for ROM info u can see my sig info
I have an 2007 335 and my bluetooth worked flawlessly until I moved to 6.1 and now it no longer stays connected. BMW is no help if the phone isn't on the approved list, which the tilt isn't. I'd love some help too if anyone has any ideas?
I have a 2007 330d convertible (E93) and a WM6.1 kaiser standard rom.
Bluetoth is synching without any probs.
Can dial contacts via iDrive etc.
I'm using "Jetwaremobile" to have sorting in "Lastname, Firstname" order and to just sync contacts of a dedicated category.
Joerg
08 e92 M3 bluetooth pairs and works but I do notice it will quite often drop calls. Previous 06 330i worked as well.
I am still on the original ATT software and have not updated to 6.1.

Can the Tilt/Kaiser Bluetooth Stack be replaced?

I've been having some issues with my Tilt and my car's hands free setup (see: http://forums.wireless.att.com/cng/board/message?board.id=cingular&message.id=105410). The problems seems to lie with the Microsoft bluetooth stack on WM 6.1. HTC is no help with this issue so I want to take matters into my own hands. Is there a way to replace the default Microsoft bluetooth stack with another, more reliable compatible stack from a reliable company (not Microsoft or HTC)? I don't want to get rid of my Tilt, but I need it to work right in my car. I'm thinking of staying away from purchasing WM 6.1 smartphones because of this.
frustrated...
Wow, no one has answered my post here, at ATT, at Kenwood, or on tiltsite. HTC answered only to tell me that compatibility doesn't necessarily mean that it would work (bs). This is very frustrating. I've read post all over xda developers and the rest of the internet about tilt bluetooth problems yet no one has an answer. I've completely giving up on trying to get bluetooth to work right with any of my devices (car, computer, etc). I can't imagine buying another HTC product. Good luck to everyone else out there struggling to get bluetooth to work on their tilt while the motorola, blackberry, lg, samsung, and other phone users watch with amazement and pity. Keep fighting the good fight. Hopefully one of you will win. I've completely lost!
That's a pretty strange story you've got there, because I have zero problems with my Tilt and bluetooth pairing to all manners of devices... on a regular basis, I connect my Tilt to my car's Pioneer stereo deck, to my laptop and desktop, and to my wireless headphones and I've had little to no difficulty. Actually, the easiest pairings so far have been between my Tilt and Pioneer Stereo Deck... At least for basic features - in order for the phone book entries to show on the deck's LCD display it required an upgrade from WinMo 6.0 to 6.1 and then in the deck itself I have to manually download the contact book. But that's the only troublesome thing I have to do, which is mostly an advanced feature any way that I could live (but prefer not to) without.
Sucks that you're having problems, all I can suggest is make sure you're doing everything properly... I've had no problems I couldn't overcome with my Tilt and bluetooth capable devices, especially since Windows Mobile 6.1 came out.
Hi,
I'm having the same problems, also when disconnecting from the BT carstereo after a phonecall, the device freezes up.
Anybody found a solution for this problem yet ?
Ny the way, my car stereo is a JVC KD-BT1
GRTZ,
Niels
@k4ever: Have you checked out this thread?
http://forum.xda-developers.com/showthread.php?t=285419
From what I can tell, they've ported the Widcomm BT stack to the Hermes and TyTN, so I imagine it's not far off from the Kaiser/TyTN-II, if it doesn't already work (my BT is working fine, so I'm not too likely to mes with my phone to find out-- but I hope this helps!)
-Weasel5i2
EDIT: Here's a CAB from the newer threads of the above post:
http://rs38.rapidshare.com/files/30721150/broadcomm_bt_stack.CAB
Thanks
Wow, thanks for the replies.
@ceosion
I got it working with a Pioneer deck in Best Buy. I was actually debating buying one, but I paid $500 for my Kenwood setup. All of my other phones work with it, to include other WM phone (not from HTC). I contacted Kenwood, but I have not recieved a reply.
@Weasel5i2
I tried the Widcomm stack when I used the stock ATT rom. It completely disabled bluetooth on the Tilt. I will try it with the PDA Corner rom I'm currently using (the best!) after the holiday weekend.
Thanks again for the replies!
k4ever said:
Wow, thanks for the replies.
@ceosion
I got it working with a Pioneer deck in Best Buy. I was actually debating buying one, but I paid $500 for my Kenwood setup. All of my other phones work with it, to include other WM phone (not from HTC). I contacted Kenwood, but I have not recieved a reply....
Click to expand...
Click to collapse
I am experiencing Bluetooth connection issues between the Tytn2 and a kenwood DNX8220BT As far as I've heard from kenwood the Tytn2 is only supported with the older version of Windows Mobile (6.0)
I've also tried the Kenwood with my wife's Touch Diamond (Also HTC but other CPU, don't know about the BT radio though) but that one is also experiencing trouble. I didn't get any indication when they would have a new firmware version ready.
You did indicate that you also tried another WM phone, which version of WM does that one operate on?
@Mautje
The other WM phone was a Samsung Blackjack II running WM 5. I downgraded my Tilt to the default WM 6 Rom from ATT, but I had the same problems. I'm running the PDA Corner WM 6.1 Rom now. Does matter which ROM I use, I get the same results on the Tilt.
widcomm stack a no-go
I tried the Widcomm stack. It did not work at all. Kept getting error that "there was not enough memory to run, please reset device" or something to that nature. Could not uninstall so I had to re-flash my ROM. Back to square one.
k4ever said:
The other WM phone was a Samsung Blackjack II running WM 5. I downgraded my Tilt to the default WM 6 Rom from ATT, but I had the same problems. I'm running the PDA Corner WM 6.1 Rom now. Does matter which ROM I use, I get the same results on the Tilt.
Click to expand...
Click to collapse
To bad. I was also looking into the other roms on this forum but it wil probably not work..
Kenwood is reporting that it should work with the rom version mentioned in the compatibility sheet.
In the sheet for version 1.43 firmware there is no mention at all of a rom version just the Tytn2.. I guess that's the WM 6.0 version

No bluetooth handsfree with cooked roms

When I flash my HD with a 1.56 cooked rom, I'm unable to connect with my handsfree. I can pair with the handsfree through bluetooth but I can not hear or speak to anyone.
If I flash with the stock HTC 1.56 rom, I can pair and talk through the handsfree.
Is there a fix for this? I've tried several cooked roms and the outcome is the same.
Thanks!
backstep said:
When I flash my HD with a 1.56 cooked rom, I'm unable to connect with my handsfree. I can pair with the handsfree through bluetooth but I can not hear or speak to anyone.
If I flash with the stock HTC 1.56 rom, I can pair and talk through the handsfree.
Is there a fix for this? I've tried several cooked roms and the outcome is the same.
Thanks!
Click to expand...
Click to collapse
I have DavidEuck 8.5 running and the bluetooth handsfree with my JVC carkit works fine. Can you try to pair with another bluetooth handsfree set and see if thats works fine? I would recommend at least upgrading to the latest radio.
backstep said:
When I flash my HD with a 1.56 cooked rom, I'm unable to connect with my handsfree. I can pair with the handsfree through bluetooth but I can not hear or speak to anyone.
If I flash with the stock HTC 1.56 rom, I can pair and talk through the handsfree.
Is there a fix for this? I've tried several cooked roms and the outcome is the same.
Thanks!
Click to expand...
Click to collapse
i have the same problem with most of the cooked roms specilly some times i can not hear the voice of other party this problem arrises with Miri's rom that i like it and Duty's rom that is very famous
for me stock roms and kwbr rom works fine
i have tested 3 devices Motorlla car kit, the expensive new Nokia sterio bluetooth headphone and sony erecsson sterio bluetooth head phone they all have problem with some cooked roms; i hope i can find a wm 6.5 rom that does not have this problem specially with good memory management like miri and kwbr that doesn't eat lots of memory.
Me, too. I am using daviddeuck v6. After 3 weeks sometimes it works and sometimes I cannot hear the other party.
I tried 2 jabra models with the same results.
Same issue
I had the same issue with my parrot 3200LS and Dutty's extreme 2.2/ Laurentius26's L26_THDV2.2_Ultimate Roms.
I even tried JETware Hands-free Extension for Windows Mobile phones (http://www.jetwaremobile.com) --supercool program btw!
But all to no extent.
Reflashing back to Laurentius26's L26_THDV7.5_WWE CE OS 5.2.20769 (Build 20769.1.4.5 L26) ROM "solved" the problem for me.
Now I get my phone's ringtones through my parrot (and thus my car-hi speakers ). Hope the problem is solved in newer roms...
(Btw, great job with your ROMs guys!! )
Y
Happens to me to.
ROM:
dutty v3.4
perhaps we could make a List of working/not worling Roms.
For me it's an essential feature for ROM choice.
Epecially bought a Radio for this feature...
Almost same for me.
Duttys v 3.4 ROM
Ford Car Kit (just talk, no music) connects and works without any problems.
iTech Clip R35 (A2DP, AVRCP) will not pair at all.
(I don't know if the profiles mean anything. Just remembered that there was a lot of talk about supported profiles in the R35 manual.)
brgds
Royan
Use Onkologs Lite-Rom and it works perfect.
I found i couldnt pair my phone with a few handsfree devices i was testing in a shop - seems there is a problem with the bluetooth stack and the newer roms. Odd this hasnt been reported sooner
i feel there is a problem with the configuration between windows and manilla some where or the driver for blue tooth is not complete that is why it loses the connection somewhere for most of the cooked roms
I agree, there must be something wrong with the bluetooth stack.
When I use a 1.14 ROM, I can hear and speak to people through my hands-free. But, when I flash a 1.56 ROM all I get is "dead air" when I answer a call through my hands-free.
I've tried flashing to Dutty's, Miri's, Laurentius26's, Topix's and a few other rom's, with the same result, I am unable to hear & talk to the other person on my hands-free.
I also tried updating to the 1.14 radio and I've tried older radio's and I still have the same problem.
Starting July 1st, my state will require drivers to use hands-free devices when dialing and driving.
backstep said:
I agree, there must be something wrong with the bluetooth stack.
When I use a 1.14 ROM, I can hear and speak to people through my hands-free. But, when I flash a 1.56 ROM all I get is "dead air" when I answer a call through my hands-free.
I've tried flashing to Dutty's, Miri's, Laurentius26's, Topix's and a few other rom's, with the same result, I am unable to hear & talk to the other person on my hands-free.
I also tried updating to the 1.14 radio and I've tried older radio's and I still have the same problem.
Starting July 1st, my state will require drivers to use hands-free devices when dialing and driving.
Click to expand...
Click to collapse
after trying almost all the new roms i returned back to the latest stock rom (28-4-2009) Bluetooth and every thing works absolutely perfect and it has got excellent memory management (only 32% with full loaded program), i use this rom when i want to rely on my HD.
by the way i think all the kwbr roms also works fine with bt. i wish i can find a 6.5 rom that works fine with blue tooth and has got good memory managemt, just waiting may be miri will do something, his rom got good memory management that is very imprtant for me
After the "SD card not shown", this is another weird report by using cooked ROM
has anyone got bluetooth devices to pair with a cooked 6.5 ROM ?
if not this is a pretty major problem ??
Yes I have.
I just got Miri's V15 pairing with my factory fitted Range Rover bluetooth kit and it works perfectly including giving access to the address book.
Previously I was using WM6.1 and many of Dutty's ROMs and I had intermittent drop outs with the car and phone.
Miri's ROM has upgraded my radio so I can't be sure if WM6.5 fixed the problem or if it was the new radio, but for the first time in 6 months I actually have a working hands free kit in my car
Royan said:
Almost same for me.
Duttys v 3.4 ROM
Ford Car Kit (just talk, no music) connects and works without any problems.
iTech Clip R35 (A2DP, AVRCP) will not pair at all.
(I don't know if the profiles mean anything. Just remembered that there was a lot of talk about supported profiles in the R35 manual.)
brgds
Royan
Click to expand...
Click to collapse
Well, that's me fixed...
Both car and iTech Clip works with Duttys 3.7/2.1 ROM.
And I'm ashamed to say; that the clip didn't connect earlier was my fault...
I used default code 0000 as stated in iTech's documentation, not the real default code of 8888...
Once I used the correct code, all was well...
brgds
Royan
I am using now Laurentius 2.1. My bluetoothheadset that suports only handsfree talking works properly. With my Jabra BT8010 only stereo music works, handsfree is a game of luck.
Hope any ROM expert will fix this in the future. For me it is one of the most important features of my TOUCH HD.
working!
Hi,
yesterday I flashed to Duttys 3.9 Turbo - and I love it!
BT works as A2DP & Handsfree!
beside it's very fast - what else we need
frottage said:
has anyone got bluetooth devices to pair with a cooked 6.5 ROM ?
if not this is a pretty major problem ??
Click to expand...
Click to collapse
Using Energy's 6.5 june 16th version.. Works PERFECT with my brand new Nokia BH-904 (which also is great)
it works in miri's rom as well plus you have lots of free memory when you really need it

Bluetooth and Car unit

Hi,
I'm using HTC Kaiser (WM6.0)and car unit Clarion CZ309E.
I can play music via A2DP make a call but can't enter via BT to my phonebook for any contacts
Is there any chance if I upgrade Rom or Radio to solve this problem?
I'm mad of knowing these all functions all working with other dump-phone like Sonyerricson, old Nokia etc.
Bluetooth Car Unit
I've had the same problem...
What I found was this software from www.jetwaremobile.com
After I installed the software, I had no connection problems and was able to upload my contacts from WM6 and was even able manually use both BT Phone & BT Audio at the same time [Listen to music from phone while WM6 phone is connected....
I'm not sure but I think they may still have a 30 day trial.
This may correct or move you in the wright direction...
Good Luck!
Thanks for that.
I knew about JETWARE but I still don't try it.
I just only hoped in another solution... like WM (Microsoft) can't be so stupid in implementing possible features to own operating system
Hello,
I do have the same unit and the same problem.
While appairing is working good, I can't access to my contacts via this unit (CZ309E clarion) with both phones (Polaris WM6.5 customized and Leo stock).
I do have checked all cross on the phones but no access possible yet.
I haven't tried third party software yet.

Categories

Resources