Related
Hi all, i am stuck, i need the help of the experts in either saying my 2 Qtek 9100s are bricked - chuck them or, they are retreivable.
Here goes:
2 X Qtek 9100 made by T-mobile - emei if needed.
Both devices stuck on the boot screen, but will both go in to Tri colour screen for flashing, but fail flashing (with several roms), i think they have button rom, its a beer glass.
GSM: - 01.12.10
OS: - 1.5.4.2
ipl 1.01 and spl 2.24
Can these be revived?
Thanks.
A Wizard by T-Mobile is a "MDA Vario", you can't have a Qtek9100 by T-Mobile. Anyway..
Have you tried flashing official ROM while they are in bootloader mode (tri colour)? Does the flashing process went smoothly? Does the IPL/SPL change when you flash the latest ROM? Give more info.
More info
At present both of them are stuck on the info below, i cant reflash them with anything else now.
Official T-mob rom 2.26 will not work...think the error was [239] or something.
Thanks.
lokidan said:
At present both of them are stuck on the info below, i cant reflash them with anything else now.
Official T-mob rom 2.26 will not work...think the error was [239] or something.
Thanks.
Click to expand...
Click to collapse
sounds like u didn't accomplish step 16 of 'the definitive guide to unlocking & rom upgrading G3 wizards' by Dr Puttingham.
both IPL AND SPL need to be the same
lokidan said:
At present both of them are stuck on the info below, i cant reflash them with anything else now.
Official T-mob rom 2.26 will not work...think the error was [239] or something.
Thanks.
Click to expand...
Click to collapse
what was the exact error.. post the code and error msg.
i got the same problem
ipl/spl 1.01
i tried "CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE"
many many time but nothing
please help
bigfatjack said:
i got the same problem
ipl/spl 1.01
i tried "CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE"
many many time but nothing
please help
Click to expand...
Click to collapse
Since your ipl/spl are 1.xx just follow the sticky by Dr. P at the top of this forum. You will start at the step running lokiwiz as you don't have to downgrade. Then upgrade to an official 2.xx rom. After that you can flash a custom rom.
errors
Various error messages with various roms.
Invalid vendor
Invalid nkbf file
Upgrade only
I believe that these devices were upgraded by a user who perhaps did not fully unlock them.
Is it possible these devices would exhibit these error if they were flashed with a G4 rom, or would they just not boot if that was the case?
Thanks ALL
lokidan said:
Various error messages with various roms.
Invalid vendor
Invalid nkbf file
Upgrade only
I believe that these devices were upgraded by a user who perhaps did not fully unlock them.
Is it possible these devices would exhibit these error if they were flashed with a G4 rom, or would they just not boot if that was the case?
Thanks ALL
Click to expand...
Click to collapse
Well, the only difference between a G4 and a G3 rom is that the G4 rom will not contain IPL/SPL. If you flashed a G4 rom in a G3 device you are fine. If you flashed a G3 rom into a G4 device then you have bricked your devices.
In your case you haven't finished the unlock/downgrade process. like mentioned above you seem to have missed step 16.
You need to re-flash the button rom to get both the IPL and SPL to 1.01. Once that is done then flash an OFFICIAL carrier rom (T-Mobile 2.26 suggested). When you have completed that then your IPL/SPL will both be 2.26. From THIS point you will be able to flash a custom rom, you will have no success until then. The unlocking guide that is stickied contains everything you need to recover from your situation.
The 2 steps that most newbies forget is to downgrade a second time to get IPL/SPL to 1.01 and after you are completely unlocked then upgrade to an official carrier rom that includes IPL/SPL (note this unlocking procedure is not for G4 devices -- doing this will brick them) Once your IPL/SPL are 2.xx THEN you can flash custom roms.
Unlocking them
Thanks ZZan, i think though i have actually blown the rom with button, but it does not bring the ipl/spl down to 1.01, it appears to blow the rom and complete 100% reboots and comes up with button Beer glass and goes no further.....
Err help?
lokidan said:
Thanks ZZan, i think though i have actually blown the rom with button, but it does not bring the ipl/spl down to 1.01, it appears to blow the rom and complete 100% reboots and comes up with button Beer glass and goes no further.....
Err help?
Click to expand...
Click to collapse
Have you tried booting into bootloader and putting your carrier's latest rom back into it? I would suggest this. If all works and you can get completely back into the phone, you could try to unlock again starting from the beginning.
The only way you could have really hurt your device is if it was a G4 before you started, or interrupted the flash process while the bootloaders were being written. I don't think it would even boot up to that screen, or flash to 100% if this were the case though. It sounds like a bad flash from the first button attempt. I would suggest using a carrier rom from the carrier that the phone is locked to to get it back to working status. Once there then you can try to downgrade and unlock again.
Are they G3 or G4
How do i tell again, something to do with the ipl/spl revisions?
You can also try re-downloading the button rom and performing the downgrade again. I have the button rom in my sig. it's possible the rom may be damaged in some way.
G3 or G4.. from the wiki
A G3 Wizard will have the following
IPL: 1.xx or 2.xx or 2.xx.00x (Note that this version only has TWO 0's.).
SPL: 1.xx or 2.xx or 2.xx.00x (Note that this version only has TWO 0's.)
A G4 Wizard will have the following
IPL: 2.xx.000x (Note that this version has THREE 0's.)
SPL: 2.xx.000x (Note that this version has THREE 0's.)
button rom
Any ideas where i can get this rom from?
thanks.
Ignore me
just seen it on your footer
It flashes but....
it goes all the way through 100%, reboots and sits on rom boot screen exibiting:
IPL 1:01
SPL 2.24
GSM 01.12.10
os 1.5.4.2
And a nice picture of a beer glass....
Help, should i reflash again? i Have done it 3 times and it still sits on boot....
Thanks.
lokidan said:
it goes all the way through 100%, reboots and sits on rom boot screen exibiting:
IPL 1:01
SPL 2.24
GSM 01.12.10
os 1.5.4.2
And a nice picture of a beer glass....
Help, should i reflash again? i Have done it 3 times and it still sits on boot....
Thanks.
Click to expand...
Click to collapse
You said your phone was a T-Mobile phone. Flash the T-Mobile 2.26 rom and see if you can get it to finish booting. If so THEN you can retry the button rom. You are in a corrupt state right now. Whatever caused it, it doesn't look like the button rom is going to recover you from it. Flash the official carrier rom for your phone and get it back to working status first. Once you can use the device and phone then you can go back and start from the beginning of the unlocking thread.
T-mob original
I have tried T-mob original (RUU_Prodigy_2210206_22102109_021911_TMO_UK_WWE_Ship.exe)
[294] invalid vendor ID
I have tried t-mob (RUU_Prodigy_1060204_105_11210_TMO_UK_Ship.exe) using NoVendorID and nk.nbf from above rom - Flashed 100% complete - rebooted - stuck on Button boot screen (beer Glass) and not booting.
Button itself will flash, with the same result, looks like its doing it then reboot, halt on beer glass.
I have i trully bricked these two? i cant have they flash and go to boot loader surely they would not do this if i had totally bricked them???
Help....
T-mob
Weird, it has upgraded the IPL to 1.06 (from 1.04) though, does this mean anything to anyone?
Can someone point me to an English version of this? The only one I can find linked on this site is http://rs25.rapidshare.com/files/17792050/Wizard_Love_2.26.10.2_WWE_Novii_CF2.rar. This is in another language (Italian maybe) and I keep getting a "300" error. Thanks.
sdl said:
Can someone point me to an English version of this? The only one I can find linked on this site is http://rs25.rapidshare.com/files/17792050/Wizard_Love_2.26.10.2_WWE_Novii_CF2.rar. This is in another language (Italian maybe) and I keep getting a "300" error. Thanks.
Click to expand...
Click to collapse
Are you sure you have a G4 ?
No, I have a G3. But according to "How to flash a new ROM to your Wizard... a little tutorial!" http://forum.xda-developers.com/showthread.php?t=298613, if I have an IPL/SPL of 2.xx, I need the wizard_love rom. Read last sentence of G.2.
I used the button ROM. It brought my IPL down to 1.01, but my SPL is still 2.25. Is that OK to proceed?
Keep reflashing the button ROM until both your IPL and SPL are 1.xx. It may take a few times. I think I've read where it's taken some people as many as 7 or 8 times to get them both down. Be patient and make sure your battery is good and charged and when you get them both down, then run lokiwiz to unlock your phone.
xeno1 said:
Keep reflashing the button ROM until both your IPL and SPL are 1.xx. It may take a few times. I think I've read where it's taken some people as many as 7 or 8 times to get them both down. Be patient and make sure your battery is good and charged and when you get them both down, then run lokiwiz to unlock your phone.
Click to expand...
Click to collapse
After at least 15 flashes with button, still no luck. I started with Cingular 2.25.
The button I am using is CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe.
My IPL is down to 1.01, but my SPL is still 2.25. How in the world do I get passed this?
It really sucks when you can't get past the first step .
P.S. Should the SIM be in the unit during the flash? I've tried it both ways.
Not sure if it matters if the sim in is in it or not, but make sure your SD card is out because that causes problems a lot of times. Here, download and try this, it is an IPL/SPL updater only. It has version 1.05 of both which might be able to bring your SPL down so you can unlock your phone.
xeno1 said:
Not sure if it matters if the sim in is in it or not, but make sure your SD card is out because that causes problems a lot of times. Here, download and try this, it is an IPL/SPL updater only. It has version 1.05 of both which might be able to bring your SPL down so you can unlock your phone.
Click to expand...
Click to collapse
Tried it several times. No luck, SPL still stuck at 2.25, but thanks for the help. Anyone else out there with this problem?
That's weird, usually it happens the other way around and people get their IPL stuck at 1.xx when they try to upgrade back to a 2.xx but the SPL upgrades without a problem. Since you already have the button ROM on there, go ahead and try and see if it will CID unlock for you. Run lokiwiz and see if it gives you any errors and if not, download and install Wizard Service Tools on to your computer and then run it and click the CID actions button to see if it tells you that your CID is unlocked. If it does then your safe to start upgrading. For some reason I have a feeling it might just work for you.
same here, got the cingular 8125 and flashed the rom. I can not get the spl down. I have 2.25 as well. ahhh what other rom should be good for a cid unlock
also i am on activesync as "guest" dont know if this matters
ctheodores said:
also i am on activesync as "guest" dont know if this matters
Click to expand...
Click to collapse
That doesn't matter.
Try flashing Tmobile 2.26 then again the 1.05 Button ROM
From what i know the Wizard Love is only for G4 Users. G3 users should flash Tmobile stoc 2.26
not all g3 are the same!!
i have experienced the same with my g3 (IPL/SPL 2.18) when i tryed to downgrade the spl... ipl 1.05 and spl 2.18 still remain... just try to unlock spl with lokiwiz02b and relax... i tried to install tnt 5.0 23 times before i unlocked the spl... just read and apply this : http://forum.xda-developers.com/showthread.php?t=285435
i downgraded and reupgraded my spl locked g3 (qtek 9100) in 45 minutes at the state of art...
-----------------------------------------------
tnx to all people that try and try and try and teach us with his experience...
I have found that the SPL doesn't matter. Go ahead and run lokiwiz and you will be ok.
yeah i got throught just run lokiwiz02b cid unlock and then update to tmo rom
hi all..My MDA VARIO IPL is 1.01 and SPL is 2.26.I flashed MDA 2 times with Button Rom but no changes happend with SPL and its same.I want to upgrade my MDA to the latest Rom available with WM5.Now m stuck with my phone and dont know excatly wat to do.I downloaded the latest Rom from T-Mobile website and try to install but it gives me error i.e "249 Invalid Vendor ID ".
Plz need urgent help in this matter.Regards
You may try to unlock first, then reflash again and SPL should also stay at 1.01.
I beg to differ. When I CID Unlocked My G3 USA T-Mobile MDA, the SPL never Changed until I flashed it with the 3.08 IPL/SPL.
I just proceeded with the upgrade and everything went fine.
Umm...
That's just my experience. My Wizard was unlocked this way.
There may be many undiscovered solutions.
dharvey4651 said:
I beg to differ. When I CID Unlocked My G3 USA T-Mobile MDA, the SPL never Changed until I flashed it with the 3.08 IPL/SPL.
I just proceeded with the upgrade and everything went fine.
Click to expand...
Click to collapse
How did you CID unlock? Via imei-check's? Or your bootloaders were already 1.xx?
i've installed now Button Rom but still my IPL is 1.01 and SPL is 2.26 which is same as it was before with T-mobile Rom.Anyone can guide how to downgrade my SPL.Also how to chek whether my Phone is CID unlocked now? I run lockiwiz and i think its CID unlocked now but still wana confirm.
OK..finally i got IPL and SPL same i.e 1.01.Now m going for the next step...
ahmeed80 said:
OK..finally i got IPL and SPL same i.e 1.01.Now m going for the next step...
Click to expand...
Click to collapse
Use WST, is easier and safer...
mestrini said:
How did you CID unlock? Via imei-check's? Or your bootloaders were already 1.xx?
Click to expand...
Click to collapse
To CID unlock my G3 USA T-Mobile MDA, I simply used the tutorial [READ FIRST] The Definitive Guide to Unlocking & Rom Upgrading G3 Wizards and followed the instructions to the letter.
When I received my device, it was a factory shipped USA T-Mobile MDA with IPL/SPL of 2.26.
I flashed the button ROM giving me an IPL of 1.05 but leaving my SPL untouched.
I installed EnableRapi.cab and soft-reset.
I connected as a guest by canceling synchronization.
I downloaded lokiwiz and ran lokiwiz.bat and pressed U to SIM unlock my device and let it reboot itself.
I once again canceled synchronization leaving my device connected as a guest, ran lokiwiz.bat and this time pressed C to CID unlock my device and let it reboot itself.
I used WST to check to see if my device was in fact CID unlocked and it was.
This time I allowed my device to synchronize with my PC when it connected and then proceeded to flash the T-Mobile Official WM5 Rom directly after completing the unlocking process and it went smoothly.
Then I flashed the IPL/SPL set of 3.08 and that went smoothly.
Then I flashed the 2.19.11 T-Mobile UK Radio and again, that went smoothly.
After all of that was completed, I experimented with new ROMs for a while until finally settling for TNT.1437 TouchFlo using the 2.19.11 Radio and never had any problems the whole time.
Everything went so smooth that I thought about writing another tutorial that was simple and to the point describing the process that I used and detailing how to do it since all of the tutorials here are very complex and can be confusing to a noobie flashing for the first time but never got around to it.
Hi, Ive looked around the forum and cannot find a solution to my problem. Ok, step by step here is what I did: I used the button 1.05 custom ROM, this was installed successfully. Then I used the definitive guide to unlocking the G3 wizard using the lokiwiz tool and this was successful as far as I know. I then upgraded to the t - mobile 3.08 ROM as this was recommended before upgrading to a WM6 ROM. This is where the problems began. I tried to flash Faria's WM6 crossbow rom and partway through the flash it hung and got stuck in bootloader mode. I read around the forums and tried to downgrade back to button 1.05, the tmobile 3.08 rom, and also the cingular 2.25 rom. The furthest I got was about 49% on the progress when my phone returns to the bootloader screen. My phone always seems to do one of two things: I either get a communication error "with my pc" which starts the recovery process(which never actually works) or I get error 274 which says that I am no longer connected to my pc (even though it still says "usb" on the screen of my pocket pc. I know that my battery will soon run out and I will have to buy a new one to resume trying to get my phone to work again. I ve also uninstalled active sync, re- down loaded and installed it, rebooted my computer (as was suggested) and this didnt work. Some one please help me as I am pretty new at this and cannot find this exact issue on the forums. Any help will be greatly appreciated!!!
Try to flash on another PC.
Ok I've tried to flash it on 3 different PCs and I havent been able to make it work, any other suggestions?
You have misread and misunderstood the definitive guide.You are confusing T-mobile 2.26 and IPL/SPL 3.08,its T-mobile 2.26 and not T-mobile 3.08. T-mobile 2.26 is a Rom ,an OS (Operating System) and IPL/SPL 3.08 are the latest upgrades to Bootloaders and not a rom.
Now,after downgrading with Button's Rom 1.05,your phone's IPL/SPL must have been 1.05,then you applied lokiwiz02b to SIM/CID unlock the phone,but ipl/spl must have remained 1.05 as you had Button's Rom 1.05 installed on your phone.
In order to upgrade to wm6,its required to have IPL/SPL 2.xx,so you were supposed to flash T-mobile 2.26 to get your IPL/SPL 2.26,but,instead of flashing t-mobile 2.26,you flashed IPL/SPL 3.08,so you have now IPL/SPL 3.08,correct ?
IPL/SPL 3.08 is an option to upgrade your IPL/SPL (Bootloaders) but upgrading to T-mobile 2.26 is recommended,so that you get IPL/SPL 2.xx to upgrade to wm6.There's your mistake,got my point ?
So,now try to downgrade to ipl/spl 2.xx or 1.xx,to do so,download the official carrier's rom of your phone from it's website and flash to get back to its original default status.
After that reread the guide correctly and follow the method.
Good luck
Thanks for your help, I'll try that and let you know how it turns out.
OK i downloaded the official cingular ROM 2.25 and attempted to flash it. I got about 76% done and got a communication error. I've tried to do it several times since then with no luck. However, my ipl and spl did change to 2.25. What should I do now?
Anybody have any suggestions? I'm dying here guys I would really appreciate some help, thanks
ok,get into Bootloaders (tricolor screen)check usb appear at the bottom of bootloaders,,try to get down to ipl/spl 1.xx,first try with button's rom,if it works,fine,otherwise try xda_minis_launch rom or wizard_love rom,if any of them installs,download WST tool and check the status of your phone by hitting the 'CID Action' button.It'll verify if your phone is locked or unlocked,ok,if unlocked then flash t_mobile 2.26 and if locked,run the lokiwiz02b again to unlock.
while flashing,turn off any antivirus,firewall and don't surf the net,check email or play any games.Leave the phone and pc alone.Must have a fully charged battery.Delete partnership with activesync and uncheck 'Allow usb connection' in the activesync,it helps sometimes.Try with a different usb cable or plugin usb cable in other usb input slot of the pc.I do hope,it might do the trick and work out fine.
Good luck
format is failed after a power outage in the middle of ugrading with shell tool.
made it worse bu trying to flash with tmobiles latest rom.
so now i'm stuck in boot screen with the following
Device is g3 with
IPL 3.08
SPL 3:08
GSM 02.69.11
OS 3.8.2.1
did i mention CID unlocked?
please advice
rephrase
Let me rephrase the question.
I have a friend who saw me use shell tool to upgrade my cid locked wizard.
He went home to try the same on his cid locked g3 wizard.
he had bad luck and it was interrupted mid way through so he brought me his dead wizard.(stuck on bootloader)
The only official rom i had was Tmobile's 3.08 so i flashed it to try and revive it.
it flashed and finished but still stuck on bootloader.
when i try and hard reset it says "format is failed".
button rom wont work, wizard love wont work, sd method wont work as it is cid locked.
Any ideas?
And if none, will imei-check work..
Get the official stock ROM for his Wizard, then flash it and you will get a working Wizard back.
However, if the IPL and SPL still stays at 3.08, there is possibility that IPL and SPL not downgradeable, so unlocking may not be possible.
Another thing...by CID unlocking the Wizard, there is no reason to use ShellTool while you can actually use RUU directly! Using ShellTool may lead to incomplete update!
Not yet home
Hey, the stock rom (tmobile 3.08) succesfully flashes but the wizard still doesnt boot. it gets stuck on the first screen.
Any more ideas?
BTW i'm very experimental so i'll try anything..
Hi,
Have you tried to flash the wizard with Hard-SPL or Soft-SPL.
I had the same with mine wizard (G4) but Hard-SPL worked for me.
You have a G3 so I don't no if it will work. Otherwise read this thread first post
Hope it will work.
Peter
pd2903 said:
Hi,
Have you tried to flash the wizard with Hard-SPL or Soft-SPL.
I had the same with mine wizard (G4) but Hard-SPL worked for me.
You have a G3 so I don't no if it will work. Otherwise read this thread first post
Hope it will work.
Peter
Click to expand...
Click to collapse
Both solutions advised require WinCE to boot to be applied... which isn't the case here
hey
mestrini said:
Both solutions advised require WinCE to boot to be applied... which isn't the case here
Click to expand...
Click to collapse
So mestrini,
What to do??
will imei-check work?
And what exactly is format is failed?
Try this thread http://forum.xda-developers.com/showthread.php?t=298613
This worked for a friend of mine. he has a G3.
Peter