Strange thing happend to my Wizard - 8125, K-JAM, P4300, MDA Vario Software Upgrading

Hi guys!
Tried to flash the phone with WM6 rom via RUU - didnt work, so i took a ShellTool and tried with this one - and now its the best part:
its teeling it can take more than 15mins but i took more than 1 hour - nothing happened, so i disconnected the phone a hard reset it.
OMG its telling OS 4.0.0.0 and wont boot so i took MrClean 2.24 rom pout the phone in bootloader mode with camera+reset and succesfully flashed it to MrClean.(now i think Im a god)
but after succesfull booting it satrted customizing and reset itself... from now on its copletely dead, no response
do you guys have had something like this or maybe some of you know what happened
My device is G4
thx in advace, cheers

gutaker said:
Hi guys!
Tried to flash the phone with WM6 rom via RUU - didnt work, so i took a ShellTool and tried with this one - and now its the best part:
its teeling it can take more than 15mins but i took more than 1 hour - nothing happened, so i disconnected the phone a hard reset it.
OMG its telling OS 4.0.0.0 and wont boot so i took MrClean 2.24 rom pout the phone in bootloader mode with camera+reset and succesfully flashed it to MrClean.(now i think Im a god)
but after succesfull booting it satrted customizing and reset itself... from now on its copletely dead, no response
do you guys have had something like this or maybe some of you know what happened
My device is G4
thx in advace, cheers
Click to expand...
Click to collapse
Is the phone CID unlocked?
Did you use an RUU from same provider?
If none of these answers is affirmative then you better forget that phone. Only recovering via JTAG (requires tools, knowledge (which you can't find here) and skills) or by getting a new board.
Last chance may be a flat battery; try a new one or charge that in another phone.
cheers

Suprising that a RUU didn't brick your phone (or probably it did).
Try charging the battery?

thx for replies guys
no my phone is not cid unlocked and as far as i know none get cid unlocked g4
i used ruu 2.5.2 from xda ftp, so as you said probably my phone is bricked...
thank god (or someone else) there are friends of mine owning same phone so i can try with other batteries
the strange thing is that not ruu bricked it, i think the post flash customization is faullty...
will keep you up to date

just to inform you:
after few days (weeks) of laying inactively on my desk i managed to try once again to resurrect my brick...
assuming the battery is empty i connected my WIZ to a charger and surprise! it lighted the red led for about a second... now i'll wait a few hours and see whats gonna happen
btw: anyone of you guys had something like that in the past?

Related

** Urgent ** my Wizard cant power on after upgrade ROM

Hi to all that can help me, i just flash the rom yesterday night that i have download and its completed the upgrade and go into the screen and running the installing of the program that come with the rom.
after the full install and the device restart without any more power and picture show.
I have try to charge the battery with wall charger and also replace with new battery but still no power.
Is that mean i'm flashing with a wrong rom and what should i do now.
Can i get it fix?
nicholas99 said:
Hi to all that can help me, i just flash the rom yesterday night that i have download and its completed the upgrade and go into the screen and running the installing of the program that come with the rom.
after the full install and the device restart without any more power and picture show.
I have try to charge the battery with wall charger and also replace with new battery but still no power.
Is that mean i'm flashing with a wrong rom and what should i do now.
Can i get it fix?
Click to expand...
Click to collapse
That really sucks...
nicholas99 said:
Hi to all that can help me, i just flash the rom yesterday night that i have download and its completed the upgrade and go into the screen and running the installing of the program that come with the rom.
after the full install and the device restart without any more power and picture show.
I have try to charge the battery with wall charger and also replace with new battery but still no power.
Is that mean i'm flashing with a wrong rom and what should i do now.
Can i get it fix?
Click to expand...
Click to collapse
which rom did u flash it with ??? wat ver ur configs before that . ur ipl/spl version os and etc.
sometime it happens that the power button doesnt works ....
try poking the reset button wiz ur stylus ... press and hold for sumtime and c wat happens
if it starts then ... press it again and wen the screen goes blank pree the camera button and hold it ... ull get into the bootloader ... den connect da usb and flash a new rom or da old factry one ...
i use molski's rom its really stable
well i'm using Wizard_Love_2.26.10.2_WWE_Novii+CF2 for the first but after that i just try to flash the rom the the chinese support rom which is Dopod_CHT_TW_RUU by using the newromupdateutility to flash it to my phone. At the beginning the rom flash successful and login to the device for install all the program that come with. After all the installation done the device will restart but never boot up anymore even u can see any green light flashing at all. Please dont tell me i damage my rom, should i send for repair?
or someone can help me out please......
nicholas99 said:
well i'm using Wizard_Love_2.26.10.2_WWE_Novii+CF2 for the first but after that i just try to flash the rom the the chinese support rom which is Dopod_CHT_TW_RUU by using the newromupdateutility to flash it to my phone. At the beginning the rom flash successful and login to the device for install all the program that come with. After all the installation done the device will restart but never boot up anymore even u can see any green light flashing at all. Please dont tell me i damage my rom, should i send for repair?
or someone can help me out please......
Click to expand...
Click to collapse
did u try da soft reset ???
yes i did but nothing happen at all
Xda Neo
I have the same problem. IPL and SPL 2.15.00001 and tryed to downgrade but after restart it does not power on. Tried everything but no way to power on. Is somebody know how to make it work again.
Regards,
You guys tried to flash a G3 Rom on your G4 Wizard.
So your bootloader (IPL/SPL) that is 2.xx.0001 is overwritten by a G3 bootloader that is 2.xx, so in other words....your devices are bricked.
Please someone, correct me if I am wrong.
Molski
yup, I agree. Bricked hopefully someone can fine the JTag on these devices.
Wow that sucks! Full moon over Miami last night, naw that can't be it .....
Sorry but unfortunately I must follow my Grandmother's advice concerning when I don't have anything nice to say...
R there NO ALTERNATIVE WAY for THIS?? HOPE we can help those people that made a mistake by upgrading to a ROM that doesnt fit to their WIZARD. due maybe because of TOO XCITEMENT they forgot to CHECK FIRST(PLS! ALWAYS CHECK FIRST) their IPL/SPL.
HOPE those master GURU's can do something!
So, please someone tell clearly how to know G3 or G4 of the Wizard
thanks so much
Sorry but I have no more tolerance for people who just jump in first without doing a little research. A while back when the G4 first came out we didn't know. Now everyone who puts out a ROM warns people about the possible consequences. And there's so many threads on just the first page with tales of woe... how can a person miss them all??
I'm sorry but my parents raised me to take responsibility for my own actions, as Baretta used to say" Don't do the crime if you can't do the time"
Similar to when a Cat 4 hurricane is coming at you and you don't leave after being warned.... then blaiming everyone but yourself...
And if anyone wants to rebute me on this, don't bother as I've neither the time nor the patience.
Bottom line is that flashing phones has the very real possiblity of trashing an expensive piece of hardware in a very short period of time. If one has any doubts, then they shouldn't do it! And if a person doesn't have a concern initially then they're asking for trouble.
Sorry....
magicer said:
So, please someone tell clearly how to know G3 or G4 of the Wizard
thanks so much
Click to expand...
Click to collapse
a G4 has a .00001 on the initial splash screen.
ArtXT said:
R there NO ALTERNATIVE WAY for THIS?? HOPE we can help those people that made a mistake by upgrading to a ROM that doesnt fit to their WIZARD. due maybe because of TOO XCITEMENT they forgot to CHECK FIRST(PLS! ALWAYS CHECK FIRST) their IPL/SPL.
HOPE those master GURU's can do something!
Click to expand...
Click to collapse
The problem is that if your bootloader (IPL/SPL) is fuc*ed up, there is no way to get it in bootloader mode to do a flash!
Only known solution is with JTAG connector, but that solution is not a clear solution yet, but I dont know nothing about that solution (simply...because I never needed it).
Molski
Dr Puttingham said:
Sorry but I have no more tolerance for people who just jump in first without doing a little research. A while back when the G4 first came out we didn't know. Now everyone who puts out a ROM warns people about the possible consequences. And there's so many threads on just the first page with tales of woe... how can a person miss them all??
I'm sorry but my parents raised me to take responsibility for my own actions, as Baretta used to say" Don't do the crime if you can't do the time"
Similar to when a Cat 4 hurricane is coming at you and you don't leave after being warned.... then blaiming everyone but yourself...
And if anyone wants to rebute me on this, don't bother as I've neither the time nor the patience.
Bottom line is that flashing phones has the very real possiblity of trashing an expensive piece of hardware in a very short period of time. If one has any doubts, then they shouldn't do it! And if a person doesn't have a concern initially then they're asking for trouble.
Sorry....
Click to expand...
Click to collapse
I knew I have a G4 and can't upgrade/downgrade with G3 roms or even change IPL/SPL, but I did that :]
Just found ROM v2.22.1 (I think), like my original Wizard's was. I was so happy that I found it, that I forgot about G3 chips existence 8)
Well, ROM was for G3 -_-
Just ran too fast and slipped. Maybe I got that speed after very often Pioneer BCT 1430 flashing. It is just immortal :]
well i know about the G3 and G4 but the rom that i downloaded from doesn't say anything about support G3 or G4 thats why i consider this rom doesn't included IPL and SPL just like the custom rom been make from other member.
Damn now i have to send my phone back to factory for fixing it. Lucky i still have a warranty of it.
nicholas99 said:
well i know about the G3 and G4 but the rom that i downloaded from doesn't say anything about support G3 or G4 thats why i consider this rom doesn't included IPL and SPL just like the custom rom been make from other member.
Damn now i have to send my phone back to factory for fixing it. Lucky i still have a warranty of it.
Click to expand...
Click to collapse
I do feel for you. I believe that the best thing that we can do is to not even make G3 ROM's available to the general public. Maybe all new ROM releases should be IPL/SPL - less. If one needs a ROM that will upgrade their bootloader they'll have to request a password protected file.
I just dunno...
Dr Puttingham said:
I do feel for you. I believe that the best thing that we can do is to not even make G3 ROM's available to the general public. Maybe all new ROM releases should be IPL/SPL - less. If one needs a ROM that will upgrade their bootloader they'll have to request a password protected file.
I just dunno...
Click to expand...
Click to collapse
...which is one of the reasons why carriers make it so hard to flash a ROM from one carrier to the device of another.
Qtek 9100 half bricked
Hi Molski
I'm new here.Just 'd like to know if you could support me on this matter.
Here we go...
I've flashed my 9100 from wwe to esn (spanish) with the ROM 1.3.7.5 or something like this.
This is the problem...I got a power failure in the middle of the flashing process.So now the device isnt able to start up it didnt install the OS properly.
Now it says:
IPL 2.24 (i managed to flash the ipl n spl)
SPL 2.24
OS 1.3.7.5
But I'm pretty sure that there's no OS watsoever because after keep trying flashing with other ROM in bootload mode.I finally managed with an Orange of 34 mb it updated the ROM,that is the IPL And SPL and with the process was running I've noticed the screen got blank and updated it properly.I was realy happy when I saw it but even though it did it properly I still got the same problem.The pda doesnt start up.When I flashed it for the first time I did it with care,followed all the instructions,that is, unlocked the CID first etc.But had the damn joy of getting a power failure in the middle of it.
I'm just wondering if one of you would be able to gimme a light on it.I've tried everything but flashing it with a G4 ROM coz I know it wont work.
Regards
Luiz Santos
Molski[/QUOTE]

Big Time Panic!!! Help please!!

I am not sure what I have done. I have a cingular 8125 G4. Downloaded the Risidioro g4 rom upgrade and my phone was not probably CID unlocked. Thought that did not matter cause I was able to install Mr Clean ROM couple of months back. I read some users in the forum who successfully upgraded from Mr Clean.
Everything went nice and smooth, the upgrade completed 100% and when it finished and rebooted it stopped at the blue, red screen and got stuck there. I did soft reset, hard reset but every time that blue, red screen comes up and gets stuck.
Has my phone become a "nice but dead piece of furniture" ? Oh! man..that would devastating!
Please help!
BigMonty
All right, no response yet but it is only a hour since I posted but for me it seems eternity already. I did something further reading and got some hope. My phone might not be dead yet. Somebody said, if I can get to the bootloader mode, I still have some hope.
I did some trick on hard resetting found here
http://forum.xda-developers.com/showthread.php?t=268836&highlight=dead
but to no avail.
Any other idea?? Cry!! Cry!! Cry!!!
Got another guy who successfully got out of the jail by having a SD image. Do you think it would work for me too? If it works where can I find it? I already e-mailed the guy, seems like a nice guy, let's see if he replies.
http://forum.xda-developers.com/showthread.php?t=274471&highlight=dead
Do you see a USB connection if you connect it to Active sync, normally it is showing in the lower left or right corner, I'm not sure.
If so, you should be able to re-flash again, best would be to do this with your previous installed ROM.
Btw,
Spl 2.25.0001
Ipl 2.25.0001
Can somebody suggest what would be most suitable ROM to go for once I am in the bootloader screen?
Vilem said:
Do you see a USB connection if you connect it to Active sync, normally it is showing in the lower left or right corner, I'm not sure.
If so, you should be able to re-flash again, best would be to do this with your previous installed ROM.
Click to expand...
Click to collapse
Thanks a lot Vilem for your reply. Yes I see a USB connection..but I guess we can't get to activesync because the OS did not load yet. I had the Mr Clean ROM installed and I tried to go for it but failed. What should I do now? Go for the original shipped Cingular ROM?Anybody knows which version it was and where can I find it?
bigmonty said:
I see a USB connection..
Click to expand...
Click to collapse
Means connected, try it. Mine crashed a couple of times like that and managed to get it going again.
You mean I should run the Mr Clean update utility which is the last successful ROM update or the orginial Cingular shipped ROM?
bigmonty said:
You mean I should run the Mr Clean update utility which is the last successful ROM update or the orginial Cingular shipped ROM?
Click to expand...
Click to collapse
try the last succesful.
bigmonty said:
All right, no response yet but it is only a hour since I posted but for me it seems eternity already. I did something further reading and got some hope. My phone might not be dead yet. Somebody said, if I can get to the bootloader mode, I still have some hope.
I did some trick on hard resetting found here
http://forum.xda-developers.com/showthread.php?t=268836&highlight=dead
but to no avail.
Any other idea?? Cry!! Cry!! Cry!!!
Click to expand...
Click to collapse
Bigmonty - after getting into allsorts of issues after trying to upgrade my G4 to various 3.2 based ROMS, i also got to the bootloader screen with the USB indicator in the righthand corner.
This worked for me - take the battery out for an hour or so, put back in and soft reset. make sure you have a good charge. reboot the PC and plug in the device.
Now the only ROM i can recover a working device from isto use the latest ROM from the phone supplier. in my case from the club i-mate site (my device is SIM unlocked).
hope it helps
Thanks AirWol. I was able to go back to Mr Clean successfully, which was a great relief. What I was doing wrong was, I was using the wrong update utility of Mr Clean. I should have used the one which was modified according to Risidioro guide for use in g4 chips. But I was using the original Mr Clean instead.
BTW, anybody knows whether it is possible to update g4 phones to the latest Risidioro or Cingular 2.26 ROMS? That is, can I modify according to Rididioro guide for use in g4? Anybody?
Probably I haven't learned enough lessons yet!

oh my...did i brick my phone?

I cant believe this....I had no issues all day upgrading the ROM...until my PC overheated and shut off at 57%...
now when my phone starts up I see the 3 bars and it sais USB in the bottom left...but active sync is not connecting!
help!
what 3 bars?
a Red Blue Green Bars color?..
If that so.. you are too lucky..
I read a little more on the wiki:
Type 2a: When the phone boots, it goes directly to bootloader mode (tri-color screen)
This is what I have right now...I can't seem to get active sync to connect...although at the bottom of the screen it has "USB"
I have tried using mtty and dont think its diong anything...
Just stay in the bootloader (tri-color screen) and make sure the "USB" is shown in your device screen..
The reflash.. even if its not sync/connected.. just reflash the ROM..
Everything will be fine..
wow....i think it may actually work....that was SCARY.
nice to know the good ole button flash works when all others fail
I just want to make a clarification..
You are just flashing your device and when the upgrade process is on 57% your computer suddenly shutoff? and the upgrade was cut..
What happened next? did you reset the device then went to tri-color screen? or you just force bootloader mode it?
Yeah pretty much exactly what you said. I literally got up for a second to get some water, came back and saw the telltale sign that my pc had just shut itself off (the screen was black except for the standard boot junk that shows up).
So I look at my device (8125) and it was locked at 57% and was not responsive. I figured that the flash util probably wouldn't continue after the computer started back up (and besides, the device wasn't alive anymore) so I rolled the dice and unplugged the USB and took out the battery. When I put the battery back in and hit the power button, it went straight to the bootloader (the tri color screen).
- By the way - ive got the button image on here now - workin like a champ...
tnx for the explanation..
have fun!!..
thanks for the quick reply - i thought i was completely stuck but the button flash seemed to take care of everything. Makes me almost think that bricking this thing is near impossible... >
Yup!.. that also my conclusion.. its impossible to brick.. thats why i ask for your clarification..
What is this "button flash"? I am stuck in RGB boot mode with no activesync connection. I have read til my eyes crossed, but can not fix my 8125 (G3)!
Please advise.
How about more information? On your bootloader (Rainbow screen) what does it show the IPL / SPL to be? What were you trying to do when you got into this situation? What happened when you were flashing? Is your device a G3 or G4?
Safest thing for you to do right now is to flash your carrier's rom onto the phone (an official shipped ROM). With your phone in the bootload, just run the ROM and it will install (DO NOT RUN A CUSTOM ROM AT THIS POINT SINCE YOU HAVEN"T TOLD US ANY OTHER INFORMATION).
G3 8125
ipl/spl 2.25
Was trying to use faria's latest rom...got stuck at 99% for almost one hour, so I rebooted computer and discon'd the wizard. Now it will boot to rainbow screen and will not connect via activesync (so I can't utilize any other roms to get back to square one).
ActiveSync will NOT connect when you are at the boot loader. As long as you see USB in the bottom left of your phone (above the left soft key) then you can flash your original Cingular ROM and be good to go again.
brick, brick, brick
It happend to me too with faria´s new crossbow rom:
the device freezed at 99% and I reseted it then....nothing happend- bootloader mode: red green blue + usb... but no chance to flash ANYTHING... always the same message:ERROR (260) update error, no connection to the device...???
I tried the O2-mini s update, and the faria rom, no chance just a brick
I need help....
Hunter6 said:
It happend to me too with faria´s new crossbow rom:
the device freezed at 99% and I reseted it then....nothing happend- bootloader mode: red green blue + usb... but no chance to flash ANYTHING... always the same message:ERROR (260) update error, no connection to the device...???
I tried the O2-mini s update, and the faria rom, no chance just a brick
Click to expand...
Click to collapse
Why did you reset it??? All roms freeze. The screen that is flashing the ROM even says it can take up to 10 mins. If you don't get an error onthe PC then DON'T stop the flashing process.
Go get a copy of your carrier's official ROM (not a custom one, but an official one from your carrier.). Then with the phone at the boot loader (Rainbow screen) and the USB cord plugged, in, run the official ROM. If that doesn't work, then get a copy of the Wizard Love rom and flash it (You'll need to find links around here for it, or pull it via PirateBay). You may also want to reboot the PC you are running on and remove your SD card (if you have one) just to remove variables that can play in to all of this.
Good luck
mfrazzz said:
Why did you reset it??? All roms freeze. The screen that is flashing the ROM even says it can take up to 10 mins. If you don't get an error onthe PC then DON'T stop the flashing process.
Click to expand...
Click to collapse
Ten minutes is understandable, but mine stalled for about an hour at the 99% mark. Even my PC would not respond. Is that normal for a rom upgrade?
-----
I was finally able to reset my 8125 to the Cingular ROM. Not sure why I couldn't do it on my PC, but after moving over to my wife's PC I did not have any problems.
Thanks!
brick, brick, brick
o.k. boys, now it is a nice little crossbow brick from faria.....and I can make telefon-calls with my brick.
thanks a lot for your help
entdiablo said:
Ten minutes is understandable, but mine stalled for about an hour at the 99% mark. Even my PC would not respond. Is that normal for a rom upgrade?
Click to expand...
Click to collapse
No, that sounds like your pc locked up or something (I'd blame windows on that one )
I was finally able to reset my 8125 to the Cingular ROM. Not sure why I couldn't do it on my PC, but after moving over to my wife's PC I did not have any problems.
Click to expand...
Click to collapse
Glad to hear you got it going. Good luck and be careful out there!
Hunter6 said:
o.k. boys, now it is a nice little crossbow brick from faria.....and I can make telefon-calls with my brick.
thanks a lot for your help
Click to expand...
Click to collapse
Sorry, I may be missing your humor or sarcasm... Are you saying its dead (if so, give more details about what it does or doesn't do, IPL/SPL it shows (if it turns on), etc... If its now working, then congrats!

Help Help Help

Hello folks I desperately need help, Ive just bricked my brand spunky new wizard G4 IPL/SPL 2.21.0001. I tried to do a Rom upgrade from shipped Rom to WM6, xm6 by mfrazz. I went through the process to 99% and then the progress meter changed from blue to red 99%, it stood there for awhile and gave the Error code 302. The screen is now in rainbow colours, it doesn’t do nothing. I need help please.
Did you CID unlock ur phone first? ... flash it back to the cingular ship rom. www.htcamerica.net
Madcap180 said:
Did you CID unlock ur phone first? ... flash it back to the cingular ship rom. www.htcamerica.net
Click to expand...
Click to collapse
Thanks for the advise, No I did not CID unlock it, I read some where in the post it’s wasn’t necessery to CID unlock G4 wizard, unless I was day dreaming! I need detail help pls, the wizard is not responding to a any treatment from it current state. It’s in the rainbow coma if I may call it, if I take out the battery it obviously goes off completely. If I put the battery back in the rainbow colours comes back on and it doesn't do anything. In This circumstance, how am I supposed to flash it back to cingular ship rom, please explain? Many thanks
All you need to do is download the official T-Mobile ROM from their site and re-flash it. The fact that you are in the "rainbow" screen is a good thing because that's the bootloader and where you need to be to flash. After that, you may need to go through all the postings about flashing a G4 again a time or 2 because if you had read them you would have already known how to fix this problem.
I HAVE THE SAME PROBLOM!!!! ok can some one please tell me what i need to do to fix this problom im at the rainbow screen and i am just stuck! is there anyway to just get my phone back to normal?????????
First, connect your phone to your PC. Don't use an USB hub, plug it directly into the PC!
Then, start the phone. When it is in "rainbow" mode, just execute the flash utility (the original provider ROM) on your PC to begin the flash process..
This should work!
TheMusicMaster said:
First, connect your phone to your PC. Don't use an USB hub, plug it directly into the PC!
Then, start the phone. When it is in "rainbow" mode, just execute the flash utility (the original provider ROM) on your PC to begin the flash process..
This should work!
Click to expand...
Click to collapse
I can confirm that this methods almost always work as i had an experience like this last night.
Doomer D. Great said:
I can confirm that this methods almost always work as i had an experience like this last night.
Click to expand...
Click to collapse
what can be done when this doesn't work? i have a message posted with details of my issue.
http://forum.xda-developers.com/showthread.php?t=313817

my device is dead

when i upgrade my device at 98% its hang up
and i make reset
then the device didnt work when i press power button
what can i do with my device
Iam from palestine and the near service center for imate is in ksa
icant send it
can i resolve the broblem with my self
Your fatal mistake is reseting your phone...it wasnt done flashing yet. The RUU(flashing prigram) often hangs up near the end for 1-2 minutes, and then it completes. I would say that you need to get your phone repaired now, seeing as if it wont even power on, that its more than likely damaged the bootloader:/
Hashem_12321 said:
when i upgrade my device at 98% its hang up
and i make reset
then the device didnt work when i press power button
what can i do with my device
Iam from palestine and the near service center for imate is in ksa
icant send it
can i resolve the broblem with my self
Click to expand...
Click to collapse
Always post the version of the phone and which rom you were trying to upgrade with ?
Check your battery,is it fully charged or working.Its always recommended to get the battery fully charged before flashing.
It might be due to discharged or dead battery that it doesn't power on,first confirm the status of the battery.
If the battery gets charged or working,get the phone into Bootloaders (multicolor Screen),if it gets there,its safe.
i try a new battry but there is no power my device is wazard g4 and i upgrade with black diamond 2 after i unlock my device (i dont remember the no but at the end there write olip)
i think that i need a new device becuase there is no light on charge when i plug in the adapter and not start when i press the power button
thanx alot
If your not intimidated by working on your phone, you could try buying one off eBay with a broken LCD and using the motherboard out of it in your phone. Worked for me and now I have a G3 instead of a G4!
what does it meat when i unplog the battry there is flash light from the screen
can any body explane this
it means there is power going to the device,but as it cant boot up it simply flashes the backlight on the screen
scousemartin said:
it means there is power going to the device,but as it cant boot up it simply flashes the backlight on the screen
Click to expand...
Click to collapse
so there is away to repare mt device??
i remember that there is an spl v1 aor something like that when my device turn off
and when my computer hang up my device went to boatloader mode and i read the numbers of ips & spl. then i found that i have to flash rom (wizard love) but i turn off my device to keeb the battrey charge to complet flashing and that is the last time i see my device working
Which is your phone,post the full data,make/model of your phone ?
zabardast_1 said:
Which is your phone,post the full data,make/model of your phone ?
Click to expand...
Click to collapse
not understanding
my device wizard g4
Ok, Perhaps you applied HardSPL and the it must be displaying IPL 2.21.0001 and SPL 2.21.olip, Right ?
And when you tried to upgrade Black Diamond,it got stuck up on Bootloaders or it was working on Black Diamonds ? you say, your computer hang up and phone got stuck on Bootloaders,did it hang up while flashing ?
Did you actualy flashed 'wizard_love rom,or you were planning to flash but it got stuck.
Why I ask all this is coz,if you flashed wizard_love,your phone is HardSPL,,it'll get bricked with wizard_love rom as it has IPL/SPL in it. But if you didn't flash wizard rom and it goy stuck before that,than,its a dead battery.
zabardast_1 said:
Ok, Perhaps you applied HardSPL and the it must be displaying IPL 2.21.0001 and SPL 2.21.olip, Right ?
And when you tried to upgrade Black Diamond,it got stuck up on Bootloaders or it was working on Black Diamonds ? you say, your computer hang up and phone got stuck on Bootloaders,did it hang up while flashing ?
Did you actualy flashed 'wizard_love rom,or you were planning to flash but it got stuck.
Why I ask all this is coz,if you flashed wizard_love,your phone is HardSPL,,it'll get bricked with wizard_love rom as it has IPL/SPL in it. But if you didn't flash wizard rom and it goy stuck before that,than,its a dead battery.
Click to expand...
Click to collapse
my computer hang up at 98% in flashing wizard
i didnt flash wizard_love rom yet and i try to change the battrey 3 time with my friends but the device couldnt start ,,, is this problem from the battrey??
now iam going to buy new battrey to try and i hope to resolve this.
i've got new battrey but still not working
so what can i do
can any body tell me where i can buy mainboard but not from e-bay.
so,,,,, no one know where ican buy new mainboard??
Hi, look at this. http://forum.xda-developers.com/showthread.php?t=276963
I repair my device successfully.

Categories

Resources