As the first instructions caused some confusion, and some people couldn’t get Jabra to show caller ID, hear are them more complete.
Don’t forget that caller ID only “works” if the caller is in your contact list in the HTC X7500.
A problem still remains: Dialling from Call List in BT8010 doesn’t work
1 – Delete the paring between HTC X7500 and Jabra (if you have one).
2 - Upgrade the Jabra to V1.33 . (http://uswww03.gnnetcom.com/Myjabra/Login.aspx?ReturnUrl=/myjabra/bt8010_control_center_na.html)
3 – Install Jetware V1.30 on your HTC X7500 (http://www.jetwaremobile.com/)
4 – Soft reset Your HTC X7500
5 – On your HTC X7500, go to -> Start -> Programs -> Bluetooth Options -> Hands-Free Config ->
Menu -> Advanced options -> Ok. Here, at least, you must select /check this options:
.Phonebooks
.Messaging
.Caller ID
.Query status indicator
.Update status indicators
.Hang up/swap to incoming call
6 – Establish a new paring.
7 – On your Jabra settings select -> Display -> Caller ID and select -> ON
8 - From your Advantage (connected to ActiveSync or GPRS) go to this link (www.jetwaremobile.com/bthfx/Device/Nokia_HS-12W.jcf.)
9 - When you download that file you should get a prompt asking which paired Bluetooth device the settings should apply to
Choose -> Jabra and -> Done.
10 – Soft reset your HTC X7500.
11 – Turn off your Jabra.
12 - Turn on your Jabra
Regards
Related
This is really not Kaiser specific, actually it's Tilt specific...and specifically AT&T. I apologize if it's posted elsewhere, but I found it useful:
If you want to change how long your phone rings before going to voice mail, dial the following:
*61*1xxxxxxxxxx**YY#
xxxxxxxxxx = your VM number (not your phone #, your VM # !)
YY = the number of seconds before the call goes to VM, valid choices are:
5,10,15,20,25,30 (30 is max)
You should get a bubble pop-up saying "succeeded" or "failed"
Or
Start > Settings > Phone > Services Tab .. Highlight Call Forwarding and select Get Settings.
Under Forward phone calls only if:
Forward After:
You can set it to 5, 10, 15, 20, 25 or 30 Seconds
PsyOpWarlord said:
Or
Start > Settings > Phone > Services Tab .. Highlight Call Forwarding and select Get Settings.
Under Forward phone calls only if:
Forward After:
You can set it to 5, 10, 15, 20, 25 or 30 Seconds
Click to expand...
Click to collapse
This is what I did ^. Much Simpler .
That works too. I did a search online before I went looking and that is what I came up with. I guess the method I found was prior to them implementing that in the GUI!
So, after no reply to my post, and a hard reset, I have discovered the answer to the no alert on SMS receipt is as follows:
Go to : Setting > Sounds >
Ensure the 'Programs' box has a tick and the 'Notifications' box underneath has a tick, then upon SMS receipt, a sound will play!
I have tried to google and searched this site but can't find anything useful.
I need to know if it's possible to Show / Hide the phonenumber on outgoing calls? I have my ISP to remove my number from phonenumbersearching and this makes my phonenumber hidden as default on outoing calls. Now I need to change the setting on the phone to Show the number... This is very easy on Nokia, SonyEricsson etc but how do I do this on a HTC Touch Diamond?
Thanks in advance.
Edit:
I found it! Couldn't even find this in the manual... Start -> Settings -> Phone -> Services -> Get config from Numberpresentation, and there it is!
after an incomming call whixh is not in the phone books ends, i used to get a message: "save to contatcs?"
it doesnot work anymore.
anyone knows how to switch this feature back on?
If I'm not wrong it's Settings -> Phone -> Advanced tab and check Add ne phone number to Contacts at end of call.
i will try - thanks
Not sure if I'm in the right place for this so sorry if this gets posted incorrectly.
I'm relatively new to Tasker. Trying to use it autoanswer a call from a specific caller and then dial the number 1, but I'm having real issues getting it setup. Here is what I've done so far.
I developed a task that I'm just calling test using the following steps:
1. CALL - triggered by an incoming call from a specific name (not using a the number)
2. WAIT - currently set to 70ms.
3. LAUNCH APP - launch the phone keyboard.
4. SPEAKERPHONE - set to "on"
5. IN-CALL VOLUME - level 8
6. BEEP - this is just a notification for me that a call has started. I've got it set to 1000 MS
7. AUTOINPUT ACTION - clicks the 1 key.
I then setup a profile, selected STATE, selected CALL INCOMING and then assigned the task to it.
When go to the task and click the play button, it works just fine. When I actually call the number though and have the task set to use my name, I get an error message.
I've tried various versions of this, screening for specific numbers or for a name, but no joy on any of them. The farthest that I've been able to get is to have the phone pick up a call and turn on the speaker phone, but that's only if I don't screen the name or the number of the caller. When in an actual call, I haven't been able to get the keyboard to launch at all.
Additionally, I've been looking all over for examples of a similar task and haven't really found anything useful.
The phone I"m using is a moto g6 - not rooted - running Oreo. Any help would be very much appreciated.