Related
Help!! there's so many upgrades available for our phones in their different guises, but what would be the best update for my UK Orange M2000, currently I have the following device info...
Orange SPV M2000 (PH20B)
ROM 1.12.22 WWE
Ext ROM 1.12.139 WWE
Radio 1.04.00
Protocol 1337.38
Windows Version 4.21.1088 (Build 14132)
Any help would be appreciated!!
Well I currently have the following:-
Orange SPV M2000 (PH20B)
ROM 1.22.00 WWE
Ext ROM 1.22.557 WWE - cooked
Radio 1.06.02
Protocol 1337.38
Windows Version 4.21.1088 (Build 14132)
This gave me a vast improvement in bluetooth stability.
It's built using BA_WWE_BelDT_12200_557_10602_SHIP, then unlocked and updated the ExtRom to put in some Orange bits, and a couple of other utilities. Then updated the splash screens with something non-QTek.
If anyone has the orginal Orange splash screens, I'd love to put them back.
Cheers
Roger
Hi Roger,
Sounds great, any chance you could post a copy of your cooked cab? If you post instructions, I will try to extract the Orange splash screens from my current M2000 for you.
Thanks
Cheers
Nick
OK so here's what I did.
I used BA_WWE_BelDT_12200_557_10602_SHIP.exe. However this seems to have disappeared off the FTP site. If anyone desperately needs it I can repost this evening. However this should do the job:-
http://www.qtek.se/files/BA_WWE_BP_12200_169_10602_SHIP.zip
I then extracted these by running the file until it gets to the point saying 'Welcome to the device Software Update Utility'. Then copied the files out of the temp directory e.g. 'C:\Documents and Settings\######\Local Settings\Temp\pft66.tmp' to a safe location.
Then copied this utility ftp://xda:[email protected]/BlueAngel/xda3nbftool.exe into the same directory and created a batch file called Change.bat in that directory with the following contents:-
Code:
xda3nbftool -x ms_.nbf ms_.nba 0x20040522
xda3nbftool -x nk.nbf nk.nba 0x20040521
xda3nbftool -x radio_.nbf radio_.nba 0x20040523
xda3nbftool -sd PH20B -sl WWE -so ORANG001 ms_.nba
xda3nbftool -sd PH20B -sl WWE -so ORANG001 nk.nba
xda3nbftool -sd PH20B -sl WWE -so ORANG001 radio_.nba
xda3nbftool -c -u NK.nba
xda3nbftool -c -u ms_.nba
xda3nbftool -c -u Radio_.nba
xda3nbftool -x ms_.nba ms_.nbf 0x20040522
xda3nbftool -x nk.nba nk.nbf 0x20040521
xda3nbftool -x radio_.nba radio_.nbf 0x20040523
del *.nba
pause
After that I ran BaUpgradeUt.exe from that directory. This performs the update, it wipes everything from the device, and can take a while to run. It install ROM 1.22.00, Radio 1.06.02 and ExtRom 1.22.557. I would guess that if you use the _169_ file listed above the ExtRom would be 1.22.169.
So, since this does not contain the right customisations for Orange, I cooked a set of cabs based on my orginal 1.12.139, adding in new bits that appeared in 1.22.557, mainly wireless and bluetooth updates as far as I can see. I have also removed MMS, since my company won't pay for it and it justs uses up space. I have added the Extended Rom Unlocker for obvious reasons. My rom is here ftp://xda:[email protected]_Extended_Roms/M2000 - Cooked - 1.22.557.zip.
I installed the Extended Rom Unlocker initially through normal methods - ftp://xda:[email protected]/BlueAngel/ExtendedROMUnlockerM2000.arm.CAB - then deleted contents of ExtRom on PDA and re-added mine. Then hard reset again to get my install.
Job nearly done now. I have now got my ExtRom, but with QTek splash screens, which I can't really live with. So I grabbed a couple of pictures someone had posted and used the NB_Image_Converter ftp://xda:[email protected]/Splashviewer/nb_image_converter_859_418.exe to convert the jpg's to nb's. I copied these to the Windows directory on the PDA and then ran MDA_Bootimage_Changer2 - ftp://xda:[email protected]/Splashviewer/MDA3_bootimage_changer2.CAB on the PDA.
All done.
However I have applied some updates extracted from this ExtRom :
ftp://xda:[email protected]_Ext_ROM_122170_WWE_AZERTY_France.rar
If I remember correctly they all relate to bluetooth. One of them (I'm sorry I don't know which) added the audio and keyboard profiles. I don't know if they work since I don't have the accesories to try them. They were, OEM_BA_11230401_WWE.sa.CAB, Default_BTsearchTime.sa.CAB and BroadcomCorp_BTUpdate.CAB, in that order.
All in all, it works quite well. I used to reset 5/6 day. Now it's probably every other day.
Hope this helps.
Roger
With regard extracting spash screens, I'm guessing you need the original ms_.nbf. I tried following this procedure http://en.pdamobiz.com/en/forum/forum_posts.asp?TID=151&PN=1, but didn't have a big enough SD card.
As to how to get the spashes from the nbf file, I'm sure there are wiser people than me here. Hopefully one will answer.
Cheers
Roger
The Splash are in fact part of the ext Rom, the cab is called ??customizing.cab (well most of the time).
The screens are part of the file set and are called splash1 splash2.
There is a UK rom on the server which I have not looked at.
On the french one it seemed that that default screen was a generic Windows one and I would think a Small 1*1CM Orange banner was also loaded.
rogerselwyn
Good peace of work.
Feel like helping out in the Exteneded Rom Kitchen.
You could have a better look at the orange original UK rom and post what you find and also update the spread sheet.
(I think it might also intrest you when it comes to making your own)
Cooking in the Extended Rom Kitichen 1.22
http://forum.xda-developers.com/viewtopic.php?t=16137
Roger
Thanks for your posting. I have upgraded mine now. This is more detailed than those posted from what User I forgot.
I've posted the Orange UK bits into the extended rom kitchen area, under Orange UK. I've had a scan through all of them with WiCE CAB Manager, and can't find any .nb files there. Closest cab with that name is OrangeUK_Customization_0903.CAB but that seems to be registry updates.
Code:
REGEDIT4
;for MMS Orange UK setting start
[HKEY_LOCAL_MACHINE\SOFTWARE\ArcSoft\ArcSoft MMS UA\Config\UI]
"ConnectionVia"="Orange MMS"
"DownloadHomeNetworkOnly"=dword:00000001
"VideoFilter"=".3gp;" ;modified for MMS 15024
[HKEY_LOCAL_MACHINE\SOFTWARE\ArcSoft\ArcSoft MMS UA\Config\mm1]
"1"="Orange UK"
"TotalSettings"=dword:00000001
"DefaultSetting"=dword:00000001
[HKEY_LOCAL_MACHINE\SOFTWARE\ArcSoft\ArcSoft MMS UA\Config\mm1\Orange UK]
"GatewayPort"=dword:000023f1
"MmscURI"="http://mms.orange.co.uk/"
"Gateway"="192.168.224.10"
"Name"="Orange UK"
"RecvDefault"=dword:0007d000 ;added for MMS 15024
"SendDefault"=dword:00019000 ;added for MMS 15024
[HKEY_LOCAL_MACHINE\SOFTWARE\ArcSoft\ArcSoft MMS UA\Config\UI\SizeLimit]
"SendLimit3"=dword:0004B000
"SendLimit2"=dword:00032000
"SendLimit1"=dword:00019000
"SendDefault"=dword:00019000
"SendCount"=dword:00000003
[HKEY_LOCAL_MACHINE\SOFTWARE\Arcsoft\ArcSoft MMS UA\Config\mm1\WspHeader]
"User-Agent"="HTC-PH20/arcsoft-mmsua-2.0.0.xx"
"Profile"="http://www.htcmms.com.tw/htc-ph20-asMMSv20.XML"
"Accept-Language"="en"
;for MMS Orange UK setting end
One problem is I only have a demo of CAB Manager, 12 executes left on it. I can't afford the $149 to buy it. Anyone know of another tool?
I had a look at your spreadsheet, and couldn't quite understand it. I'll have anothet look and see if I can make sense.
Cheers
Roger
I've posted the Orange UK bits into the extended rom kitchen area, under Orange UK. I've had a scan through all of them with WiCE CAB Manager, and can't find any .nb files there. Closest cab with that name is OrangeUK_Customization_0903.CAB but that seems to be registry updates.
Code:
REGEDIT4
;for MMS Orange UK setting start
[HKEY_LOCAL_MACHINE\SOFTWARE\ArcSoft\ArcSoft MMS UA\Config\UI]
"ConnectionVia"="Orange MMS"
"DownloadHomeNetworkOnly"=dword:00000001
"VideoFilter"=".3gp;" ;modified for MMS 15024
[HKEY_LOCAL_MACHINE\SOFTWARE\ArcSoft\ArcSoft MMS UA\Config\mm1]
"1"="Orange UK"
"TotalSettings"=dword:00000001
"DefaultSetting"=dword:00000001
[HKEY_LOCAL_MACHINE\SOFTWARE\ArcSoft\ArcSoft MMS UA\Config\mm1\Orange UK]
"GatewayPort"=dword:000023f1
"MmscURI"="http://mms.orange.co.uk/"
"Gateway"="192.168.224.10"
"Name"="Orange UK"
"RecvDefault"=dword:0007d000 ;added for MMS 15024
"SendDefault"=dword:00019000 ;added for MMS 15024
[HKEY_LOCAL_MACHINE\SOFTWARE\ArcSoft\ArcSoft MMS UA\Config\UI\SizeLimit]
"SendLimit3"=dword:0004B000
"SendLimit2"=dword:00032000
"SendLimit1"=dword:00019000
"SendDefault"=dword:00019000
"SendCount"=dword:00000003
[HKEY_LOCAL_MACHINE\SOFTWARE\Arcsoft\ArcSoft MMS UA\Config\mm1\WspHeader]
"User-Agent"="HTC-PH20/arcsoft-mmsua-2.0.0.xx"
"Profile"="http://www.htcmms.com.tw/htc-ph20-asMMSv20.XML"
"Accept-Language"="en"
;for MMS Orange UK setting end
One problem is I only have a demo of CAB Manager, 12 executes left on it. I can't afford the $149 to buy it. Anyone know of another tool?
I had a look at your spreadsheet, and couldn't quite understand it. I'll have anothet look and see if I can make sense.
Cheers
Roger
rogerselwyn
Thanks for your help, I have sent you a PM
rogerselwyn
Got me interested!
Sure Cant find and Splash either, not in any of the Orange_*
Tell me is it possible that you come up with a default Windos type screen?
Like in the French version?
Is it possible that yoo have a small Orange symbol on that screen?
What is PVPlayer_Eng_AAC.2577.CAB?
Looks like it also makes other folders under programs
Anyway orange UK does more changes than I have ever seen.
BA_OEM_PA_STK.sa.CAB This smells like a Wireless manager upgrade.
I know this is gonna sound daft, but how could I for example change the contents of the Qtek 1.22 ext rom, and put in their place upgrades/patches etc so that i don't have to keep adding them each time i hard reset?
What im trying to say is how do i customise the extended rom? What proggy do i use to open and/or modify the nbf ext rom file ?
Daft no way.
This is what I worked out
Load what ever you want os Ext Rom and radio.
You now have let us say 1.31.00 13.100 1.060.
You booted, your happy.
Then unlock the Extenede rom with the toll
Go in to it.
Edit your config sys take out all as in all Cabs
Leave the rest Enable / disable Rst.
LOCK and HIDE
Hard Reset.
Have a look at your programs, Album should be gone
Now lun lock the rom again.
Take out the dam reset and enable disable.
Load what ever cabs you want
Make suure cab a does not downgrade cab b.
Fix the config.sys
When you feel like it run autoexec run.
For hardret you need the rom locked and hiden.
Any way that what I did and it worked for me.
At the moment I just load cabs by hand as I cant afford to go through the hardreset andlose all my apps.
So Got you lost ??
Managed to get 1.22.00 on and sorted out my Ext ROM, thanks to all peeps who gave their time to explain to me how to do it.
Is it the same process to go backwards? For example if this ROM wasn't stable, can I go back to a 1.12.00 ROM?
I've got the spv-m2000 and there is no orange boot up splash it just says windows 2003.
still on original rom
radio 1.04.00
wwe 1.12.22
D 1337.35
Now I think back, it probably just had a standard Windows splash. I've got some generic Blue Angel/HTC ones for now.
PVPlayer_Eng_AAC.2577.CAB is a PacketVideo player. Not used it, don't know whether it is any good.
Cheers
Roger
Roger, just tried to install your MDAIII splash screen changer and I clicked on it, it installed.. but I can't seem to find anything anywhere which will run the proggy...could you please shed some light on this.
BTW thanks for guiding me through upgrading my M2000.... didn't take long at all!
Follow the process at the top of this thread.
No program to run, just soft reset.
Why is the Extromunlocker in french?
What do
Bloquer ecriture, Afficher, cacher, debloquer ecriture mean?
I originaly had the XDAII unlocker but it will make the ext rom visible but wont unlock it
I have now got
ROM Ver 1.22.00 WWE
ROM Date 10/22/04
Radio Version 1.06.02
Protcol version 1337.38
extrom version 1.22.557 WWE
I would like to change some of the rom back to ORange from QTEK
Cheers
I used this http://forum.xda-developers.com/download.php?id=2357 unlocker... its in english.
I clicked on unhide, then unlock, then soft reset. The ext rom is now free to modify!
OK, I have a Cingular SX66, I flashed it using the WWE Versions With Arabic Customizing WITHOUT the ExtROM, meaning I kept the Cingular ExtROM, no problem, flashed find.
After that, I flashed the RadioROM 1.06.02 ALONE, and right now, when I hard reset, it says NO GSM, in other words, it became a PDA only, phone function is no longer avaiable. I tried to flash other i-Mate ROMs, but it keep says Country ID is not correct, N-N-12-12-12. I ran GetDeviceData.exe, it comes out like this:
PH20B1 B 1 WWE E 1.31.00 0 0 1.31.112
So now, what is my country ID so that I can use the xda3nbftool.exe? It used to be XGULA001, or is there a way to execute the program without checking the country code, or a ROM with no country code checking.
TIA for all of your helps!
Still looking for help, tried O2 launch ROM, wrong Mobile ID error.
BTW, this is the DeviceDate.txt, before and after:
Before:
PH20B1 B 1 WWE E XGULA001 1.20.10 1 0 1.20.115 1.02.10 02.10
After:
PH20B1 B 1 WWE E 1.31.00 0 0 1.31.112
Nevermind, problem solved by flash another RadioROM from QTEK.
Paper weight
JRSmooth, I just saw your posts. I'm experiencing the exact same thing!!
I tried to upgrade my phone during the Christmas vacasion and haven't been able to use it ever since. The radio says FAILED during the startup sequence (which takes forever after the "upgrade")
How exactly did you fix it??
Re: Paper weight
GNU said:
How exactly did you fix it??
Click to expand...
Click to collapse
Well your situation maybe different from mine.
The radioROM I used was corrupted, I kind of knew it because when I flashed it, it did not show what version of radioROM am I flashing into. Now, what error message if you try to flash it again? Try to use a different radioROM from the same mfg. as your last flash.
Hope this help.
Well, it's a kind of embarrassing situation...
I've flashed my GSM device with a CDMA radio stack... It shows up as FAILED if you look at the version.
Hello,
Because your device IDs are different, eg, PH20B1 as opposed to PH20B0, you'll have to make a batch file to fix this. Here are a few instructions I threw together but REMEMBER - I take no responsibility for any damage done to your device. You are following these instructions below at your own risk!
1.) Download a full ROM upgrade file of your choice. I recommend the i-mate one in this folder here - ftp://xda:[email protected]/Imate_PDA2k_WWE_12200_162_10600_SHIP/ but feel free to use another.
2.) Extract the files from your full ROM by opening it with Winzip or Winrar and dumping it's contents into a folder. From now on it will be refered to as "your folder".
3.) Copy the file "GetDeviceData.exe" from your folder to your device and run it. It wont appear to do anything but it has!
4.) From your PC, browse to the Windows folder on your device. Copy the file "DeviceData.txt" to your folder.
5.) Open the "DeviceData.txt" file on your PC. You will see what ROMs your device has installed on it. Mine reads (without the blank/null characters):
PH20B0 B
WWE E
O2___001
1.22.00 0 0
1.22.162
1.06.00 06.00
The "PH20B0" is the device id, the "WWE" part is the country code and the "O2___001" part is the operator ID. Identify this information from YOUR "DeviceData.txt" file as your devices are different from mine and you will need this info for your upgrade. Make sure you write them down because if it's incorrect, you'll get errors and your device will hang!!!
6.) Download the file attached to this post, "Fix.zip" and extract it to your folder. Make sure you have the two files "xda3nbftool.exe" and "Fix.bat" in the root of the folder, not in a folder of it's own!
7.) Edit the file in your folder "fix.bat" using notepad (DON'T RUN IT YET). Replace the words "PH20B0" with your device ID, "WWE" with your country code and "O2___001" with your operator ID. Now, exit this file and save your changes.
8.) Run "fix.bat" from you folder. A Command promt window should appear and process the ROM files. This will change the device ID, country code and the operator ID to the ones you specified, thus allowing the upgrade to work on your device.
AT THIS STAGE, IF YOU CONTINUE, YOU WILL LOSE ALL THE DATA AND PROGRAMS ON YOUR DEVICE!!! BACKUP ALL FILES THAT YOU NEED!!!
9.) Run the "BaUpgradeUt.exe" file from your folder. This will start the upgrade process, so follow the on-screen instructions. During this you will see a screen with "From:" and "To:" showing what versions you have got to what versions you're going to. Make sure this data is correct and then continue.
10.) Once the upgrade has finished you'll be instucted to do a hard reset.
YOUR DONE - You should now have the upgraded ROM!!!
Good luck with this and let me know how you get on!
Regards,
Dom
I got a device of a friend. I'm not sure he used a wrong ROM image or the upgrade failed but it ended up with no Radio or ext ROM version in the boot screen .. only Rom 1.12.
More over, running getdevicedata.exe gives empty file with only "PH20" written there!
.. and any rom flashing gives operator id error.
my question is, can I update the Rom files to have no operator ID ?
Biso007,
In theory, you should just be able to follow my instuctions above but instead of using the standard PH20B1 or PH20B0 in the -sd switch ot the batch file, use PH20. This should allow you to continue with the upgrade process.
Regards,
Dom
Upgrading iMate PDA2k to O2 Rom
Can you tell me where I can download the Fix.Bat File?
Do you know if it will work to upgrade my iMate PDA2K to the O2 rom?
I keep getting an error message incorrect Country ID?
still getting the country id error...
can someone upload a country id free rom?
thanks
also it says checksum error.. how i fix this
thanks
This thread has been started to allow new users to post question in regard to Upgrading based on the information that they have read on Wiki.
The Wiki Blue Angel Home Page is
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel
The Section for new Users is:
http://wiki.xda-developers.com/index.php?pagename=BA_GettingStarted
Hi,
As I mentioned in another thread, there is no info on how to save/backup/extract you existing ROM. I tried to use XDA-Tools and created some file with size around 30M. (I named it nk.nb1)
AFAIK, it's only "core" OS rom. So I want to capture now Radio and Ext. ROM in the same format.
Anyway, since if I do something wrong, I will loose it forever after I flush it with something else, so I would like to have more info and understanding.
Cheers,
Gorby
I am a bit lost on what you want to do.
Ext rom can be unlocked zipped and saved.
Both os and radio can be install one at a time.
Thus you can cook a rom by using radio and os from other ship files. (if you have a password).
The saving of rom files (as in a rom dump) is explained somewere. Do a search for rom dump.
Also check
http://forum.xda-developers.com/viewtopic.php?p=84478#84478
There is no info about that on wiki as nobody has written any.
what i want to do is to backup my original OS, radio and ext. rom. by now i know that i can unlock my ext rom and copy it to a safe place. however, i m not sure that if restoring extended rom from this manual backup i will be able to achieve exact state of original rom. for example, dates of files will be different, reported version number could be different.
so i want to backup image of ext. rom.
moreover, i want to upgrade primarily because german interface sux for me and i need english one. so i need to backup all 3 roms.
i tried to use xda-tools but it only saves os and probably wrong because the size is too small (around 30M).
i figured out that i probably have to use d2s command from bootloader prompt. so i got an SD-card today.
it is still not clear to me how can i make 3 .nbf files that can be used later to restore my original rom with BaUpgradeUt.exe.
in addition, it would be useful for the community if i upload these roms because i didnt see that my model was mentioned here:
Operator code BRIGH102
E-Plus in Germany
OS: 1.22.01
ext: 1.22.756
radio: 1.06.00
btw, i could even write a how-to on dumping blue angel ROMs if i have enough info.
thanks,
Gorby
Well, I was able to get OS image using pmemdump:
Code:
C:\XDA-Tools\Xda Utils\build>pmemdump.exe 0x80000000 0x02000000 nk.nbf
Copying C:\XDA-Tools\Xda Utils\build\itsutils.dll to WCE:\windows\itsutils.dll
CopyProcessMemoryToFile(00000042, 80000000, 02000000, nk.nbf)
Unfortunately, I couldn't dump ext. rom and radio in this way:
Code:
C:\XDA-Tools\Xda Utils\build>pmemdump.exe 0x60000000 0x00300000 radio.nbf
CopyProcessMemoryToFile(00000042, 60000000, 00300000, radio.nbf)
ERROR: ITReadProcessMemory - Attempt to access invalid address.
C:\XDA-Tools\Xda Utils\build>pmemdump.exe 0x70000000 0x01080000 ms.nbf
CopyProcessMemoryToFile(00000042, 70000000, 01080000, ms.nbf)
ERROR: ITReadProcessMemory - Attempt to access invalid address.
Perhaps, I have to specify another process context with -p option. Which one?
Thanks,
Gorby
You dont need to dump the EXT Rom.
Unlock the Exteneded rom, copy it to your desktop, rar it and upload it to this site for others.
When you need it back.
Unlock it , Un rar it , copy it to Extended_rom, Hard reset.
As for the Radio, download a copy of the 1.06.00 of the FTP site or extract it from a 1.06.00 ship.
OK. I tried to backup to SD-card and restored from it to check that it works. No problem.
I just can't easily dump it to files, but that I could figure out later. Important that backup/restore is working fine!
Anyway, having backup on a separate SD-card is not a bad idea anyway... I just need a bit smaller card instead of "misuse" of 512M card.
I'll upload my extended rom to the ftp.
Cheers,
Gorby
New Extended_Rom
Here we go finally:
/BlueAngel/Extended_Roms/Version_GER/E-Plus_Germany_QTEK_BRIGH102_Ext_Rom_122725_GER.zip
My device is:
PH20B 0 B GER R BRIGH102 1.22.01 0 1 1.22.752 1.06.00 06.00
And btw, it was successfullt flashed with:
i-mate_PDA2k_Arabic_13100_112_10600_SHIP but with radio replaced by 1.06.02.
Thanks for help and regards,
Alex
PS: I was able to backup restore all ROM's to CD-card but still need a way to copy them to PC.
Update MDAIII (PH20B1) with PH20B file?
What do you think will happen, if itried to upgrade my PH20B1 (MDA III with no camera) with the latest PH20B update from TMobile Germany?
The modifications in the EditFix.bat would look like this:
xda3nbftool -sd PH20B1 -sl GER -so T-MOB101 ms_.nba
xda3nbftool -sd PH20B1 -sl GER -so T-MOB101 nk.nba
xda3nbftool -sd PH20B1 -sl GER -so T-MOB101 radio_.nba
Will this have success or will it kill my device?
Thanks for your help,
Bubisch
Dont think you will have a problem, however I am not sure if we know the password for that update. It seems you are a t-mobile customer, all you need to do is run the upgrade (with out fix.bat)
Upgrade does not work!
No, it does not work. My device is a PH20B1, the update is for PH20B. No go with nbftool, might be the wrong passwords. For information: i'm O2-Customer, just bought it with TMOB-Branding, because XDA III is not out until today...
Hum, thats a new one for me.
So you are saying that even if you follow the wiki info using the Imate 162 wwe and the fix.bat you cant upgrade.
q1 what does your devicedata read
q2 what is your error message
PH20B1
I followed the Wiki, but i didn't try the WWE (want to stay with german language), but I tried the official TMOB Upgrade. I even tried updating just the radio rom. But it didn't work.
NBFtool still has the opinion, that its the wrong password, Upgrade Utility says, Wrong Model ID (Error 100).
Another Fix.bat from another forum says:
NBF: Wrong password
UpgrUt..: Radio Checksum Error (Error ID 123).
My device data reads the following string:
PH20B1|GER|T-MOB101|1.06.01|1.06.125|1.00.00
Pech Gehabt!
Ok a recap, you have tried the offical rom from t-mobile and it falis due to the fact that this rom was built for the PH20B and not the PH20B1.
The GER seems to have the new encription so the tool wont work on it yet.
I Have so far only been able to find one GER rom which I posted on wiki, there is talk that T-Mobile austria has one which seems to be outdated (read that one on some thread in this forum).
We have a tool in the works that will fix this problem as it can handel both the old and the new encription thus you will be able to build your own rom by adding all the parts.
What you need to find is a ship.exe for the PH20B1, this you should be able to use and delete the ndf and only leave the radio one (from the FRA 1.06.02) this will solve your radio problem.
Thats about all I can do for you given what we have at the momenta and the fact you want a GER Rom.
Waiting for more...
Okay then, all i can do is wait for this. But its ok. I think your work on this is great. Let me know, if i can help you.
Thank you very much.
Unlocked XDA IIs
Which program can unlock the XDA IIs. Thanks.
http://forum.xda-developers.com/viewtopic.php?p=92078#92078
----------
edit.
Naaaaa just forget again. Dont want this anyway :?
Maybe the wiki should be updated stating that the xda3nbftool is under further development.
---------
Any update info on the new xda3nbftool ??
Id really like to try the new O2 1.31.139 but offcourse i get the wrong password for ms and nk files and none for the radio file at all
Using xda3nbftool.exe -t radio_nbf >password.txt
Or does any body got som link explaning another way of getting the password???
Maybe the wiki should be updated stating that the xda3nbftool is under further development.
Click to expand...
Click to collapse
Its at the bottom of the screen when you are in wiki, its a little button, you can press it, its called "edit".
MDAIIIUser said:
Maybe the wiki should be updated stating that the xda3nbftool is under further development.
Click to expand...
Click to collapse
Its at the bottom of the screen when you are in wiki, its a little button, you can press it, its called "edit".
Click to expand...
Click to collapse
He he, i know but i dont want to intefere with your work.
Ill update it a little.
Guys!
Did someone try this tool from ftp?
ftp://xda:[email protected]/Uploads/HTC_Wizard/create_nknbf.zip
This is a combination of a leaked file from HTC nb2nbftornado.exe (released in an I-mate SP5 upgrade and a exe file of the SD dump splitter perl script for Typhoon. I've tried to create NBF's using the utility and NB's and it worked flawlessly.
Bye,
Ricardo
I confirm. Works fine.
Typho5 can also split nk.nbf.
i tried it
I used nb2nbf_tornado.exe convert nb to nbf
I found only OS and extrom can be flash.
this is what i got now
9b000000 00a00000 63243c65 Extension Rom
96000000 00280000 2264ae65 GSM
80040000 03900000 f8305108 OS
92000000 00030000 3f95ebad Splash Screen
9d000000 00010000 d212b789 HTC Logo
90000000 00000800 dcda598a IPL
91000000 000c0000 d9316f31 SPL
but only OS and EXTROM works.
Someone finally posted it on here, now everyone can enjoy cooking their own custom roms. FYI, to create your own extended rom you can use the tool winimage to remove/insert files into the nb/nba. Make sure you make them read only.
New roms have two ipl&spl with the same addresses:
91000000 000c0000 fe800e95 SPL_1
91000000 000c0000 23d28226 SPL_2
90000000 00000800 6759ae25 IPL_1
90000000 00000800 874cd295 IPL_2
so, in this case, how to correctly use nb2nbf to create nk.nbf?
File missing from FTP
Guys,
Apparently, the file is missing from the ftp site. Would someone please be kind enough to upload it again or post it here?
Thanks,
Hal.
BUMP!!!!!!!!!!!!!!!
Please anyone that still has this tool, please upload it, or post it, or email it, hell MMS it if that's what it takes? I would really like to make my own EXT rom! So would soem others on the board.
All help is appreciated (not just by me, either); Lew
lewcamino said:
BUMP!!!!!!!!!!!!!!!
Please anyone that still has this tool, please upload it, or post it, or email it, hell MMS it if that's what it takes? I would really like to make my own EXT rom! So would soem others on the board.
All help is appreciated (not just by me, either); Lew
Click to expand...
Click to collapse
Howdy Lew - I'm drivin home from Tahoe and can't help much now. when I get home in a couple hours I'll throw the files back onto the FTP. not sure who keeps wiping the uploads folder...kinda a bummer.
OK it's in the upload folder. Be warned, you can destroy your bootloader with this. No bootloader = no worky. Be sure you understand exactly what you're doing before flashing a self-created ROM to your device. Don't run with scissors. Wear a condom.
Anyone tried that on AKU2 ROM yet?
BTW, thanks for uploading the file back on FTP ;-)
Hal
and then it was gone (again) ...
Here it is!
Hal
not there anymore??
I had one of the first versions of WM5 on my blue angel, and decided to go downgrade back to WM2003 beacuse of the lack of applications for WM5 at the time. I now wish to go back to WM5, and cant beacuse devicedata.exe creates devicedata.txt with nothing more than PH20B in it.
I.e I should get something like PH20B 0 B GER R T-MOB101 1.12.00 0 0 1.12.100 1.02.00 02.00
when I only get PH20B.
Can I type this info in manually?
My device info is as follows:
I have a orange m2000 with the iMate 1.40.00 WWE ROM that I think is cooked using radio version 1.13.00 and protocol version 1337.42. ExtRom seems to be blank
I have created PH20B 0 B WWE E ORANG001 1.40.00 2 2 1.12.139 1.13.00 04.00 would this work for my device??
Thanks in advance WWWeed
Anyone Know if I can get away with just reflashing it with the latest ROM as I have patched once when I first upgraded??
Also where are the ExtRom patches located on the FTP? Theres no URLS on the wiki (http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM5_WizardPort_v1.3-TuMa)
I need to find
* ?MidletManager-TuMa.cab - Installs the Java Midlet Manager
* ?ArcsoftMMS-TuMa.cab - Installs the Arcsoft MMS Composer (NOTE: You must create an account)
* HTC Camera-TuMa.cab - Installs the HTC Camera and updates MMS for Camera operation
* HTC Camera-TuMa-?RamDisk.cab - This is an additional .cab file, this can be installed onto the RAMdisk ("Temp Disk")
If I can get this all working, I'll make a nice donation on XDA developers!
There resaon you only see the device name in your txt file is that it has a lot of charters that are no printable and you are only looking at the first few charaters, (Wiki getting started does a better job of explaining that).
You can't copy your created txt file to your device (well you can but it does no good). The file is need in its full form as in with all the rubish (I think but have never provesn it) that the file is created by the upgrade process and that the country code error derives from the check of that file and the header of the rom that you are flashing.
So the short of all that is if you need the latest OFFICAL rom (1.42) then follow the instructions in wiki on flashing it,
If you want the latest WM5 (1.3)rom then .... Follow the instructions in wiki else follow the instructions in wiki.
As for the cab files and the link to the WM5 1.3 rom well there is always wiki...
The cab files are part of the rom which can be found under the link "2 Download the ROM from here" wihch part to of the instructions in the section above your own cut and paste. (thats the also the Link BTW)
Have fun!!
Cheers for your time and patience MDAIIIUser,
Guess it was just me being stupid
Am now on the 1.3v WM5 Cheers!