i have tried the SSPL and it works, i can flash the 3 roms i have found for the breeze
RUU_BREE100_1.13.251.2_1.06.00.10_QtekEUR_Ship_R3
RUU_BREE100_1.32.251.1_1.29.00.10_HTC
RUU_BREE100_1.34.251.1_1.38.00.10_HTCEUR_SHIP
but since i flashed the 1.38 radio rom without using this sspl. whenever i use the sspl i can only flash the rom not the radio. my phone is now stuck on the 1.38 radio which drops calls after about 30 mins and the battery life is really crap, i am on area where u get full 2g or 1 bar of 3g so its doing its trademark searching and killing the battery.
I have tried duttys tool with the radio extracted and put on the SD card and flashed but no joy.
my device is not SuperCID i just use the SSPL to bypass it.
anyone got any ideas how i can flash the 1.29 radio or for that fact any radio to phone instead of the rom?
i've read that many have tried 1.20 radio to solve a few problems but i have no idea how i can flash this. I have tried to make my own rom with the tools here but again they just flash the new OS living the radio 1.38.00.10. i am downloading RUU_Radinly_1.20.31.10.exe and will flash it if i knew how. SSPL just turns around and says invalid ID error 244. so its like the radio isn't designed for this device.
anyone got any idea ?
1.29 is even worse than 1.38... Missed calls in full GSM coverage (4 bars), horrible sound quality (either you or called party can't hear most of the conversation)... Don't even try it!
And concerning the problem not being able to flash new radio:
As I already wrote in this thread, flashing Radio ROM 1.29 (and above) also flashes new Radio Bootloader 0108 (different thing than Phone bootloader) which requires SPL 1.09 (or newer) to flash Radio ROMs.
Current SSPL for Breeze is based on some older SPL which, as you found out, isn't compatible. Until someone creates SSPL for Breeze based on SPL 1.09 or SPL 1.10, you're stuck just like me...
thanks very much for the post explaining it. i have read someone might make a new sspl with the new spl's in mind so as you said, we have to wait and i guess i will. i am however going to send my breeze back to HTC because of the constant dropping of calls whether it is 10seconds or 35 mins, it drops it without fail.
Related
[writing from work in a hurry, so excuse me for not having all my details in front of me]
I'm a long-time avid user/flasher of the Wizard who recently bought an old BA on eBay for my wife. First thing I did was download the xplode WM5 ROM and flash the sucker. Very nice and now up-to-date.
Call volumes sucked, so I checked her Radio version, and it was 1.02 or something ridiculously old. I tried to flash the newer 1.15 Radio Rom using the bootloader app that came with it (MAUUpdate something). I got a country code error, so I added the special line to the config file to cheat.
Now it starts the process and never gets past 0% on radio flash. Just hangs. And then some strange 114 error when it finally dies.
I've tried with the newest MaUpgradeUt_noID files I could find. I even tried the 1.13 Radio ROM with no change.
I even re-flashed to WM2003 and tried to flash just the Radio from there. Kept getting "wrong device" message or connection error or something. I tried multiple times in a row (one post suggested the first time will error but second time will work).
I did SIM unlock just in case (Cingular on Cingular so shouldn't have been a problem).
Any suggestions out there? I think I've tried everything!
And yes, I've read all posts and wiki's. (Usually I read only Wizard, but have extended my reading to cover the BA).
Have you tried downgraging to WM2003 then upgrading to Radio 1.15 then finally back to WM5?
I had upgraded my radio ROM when still on WM2003 and found no problems!
xummy111 said:
Have you tried downgraging to WM2003 then upgrading to Radio 1.15 then finally back to WM5?
I had upgraded my radio ROM when still on WM2003 and found no problems!
Click to expand...
Click to collapse
yes, I did. mentioned that above.
I get either country code error (or after correcting that per the wiki advice, I get long period of hang followed by an odd error 113. I think.
does device origin matter? my BA is from ebay and the getdeviceinfo.cab leaves me a blank result except model number and a few random numbers...
I take it that when everyone else flashed to WM5, they followed the simple Wiki instructions and everything went fine? I think I got some odd-ball sub-model that is resistant to Radio flash.
Downgrade Your BA to the WM2003SE, then unlock it with xda3_all_unlock-v1.6_138.exe tool (You can find it in the BA forum here with description how to use it) then try to flash the Radio ROM You want....And then You might upgrade to WM 5.x again if only You wish.
I've tried one of the other sim unlock apps already (successfully) without solving the problem (was tried on WM5). I'll try the order of downgrade, unlock, then upgrade and see if it works.
Thanks for the suggestion.
Jeremy how did it go? are you able to upgrade to the latest radio rom? I also have the same problem as you do. Do you mind telling me the steps if you somehow able to upgrade to latest rom?
this worked for me. after you flash to a new rom (like xplode's), do not take out the BA yet. flash to the new 1.15 radio rom. then you can do the no/yes/yes routine.
Hi all,
I have a Spanish Vodafone P3600. (S300). I've run into problems while updating the radio ROM and several other things.
I've managed to change the SPL, all versions, no problem. Even the hard SPL. The problem arises with almost ALL ROMS and ALL RADIO ROMS. I put the PDA in bootloader mode and I begin the updating process. Well, it stays at 0% all the time, both in PC screen and PDA screen. When I am tired of waiting (more than 30) minutes, then I have to take the battery off. The PDA goes into bootloader and I have to apply the unbrick procedure.
I have only been able to put the FAMAN 3.5 Spanish ROM (WM6) so the PDA works when I unbrick it. However, it does not have RADIO ROM and it shows "no GSM" at boot and obviously I cannot use it as a phone.
Is it broken? Why can't I flash the radio ROM? Somebody with a similar problem?
Thank you all very much in advance.
Best,
Unsolvable problem
Thanks all for the feedback. Pof was kind enough to address the problem.
I ditched the radio bootloader (not the regular bootloader) and a a result I cannot flash the radio. It seems that the phone has to be sent for repair.
"if it works... don't touch it" I should have paid attention to this
Okay i give up i installed the SPL okay want a cooked rom i have gone for the onlinex one, then i got the radio the one that says highly recommended. Did what it said unzip with the RUU then run. Problem is i have when it gets to the gray bit with the progress bar as well as the one on the p.c it refuses to do it. Then comes up with the error then tells me to recover but it dont need to as the device started up and says skip if the colours dont come on.
I am trying to install the Radio v1.00.25.05 (Quad Band,Save Power and have better Network Connection!) "Highly Recommended"
The current one is 1.34.831.1
badman112 said:
Okay i give up i installed the SPL okay want a cooked rom i have gone for the onlinex one, then i got the radio the one that says highly recommended. Did what it said unzip with the RUU then run. Problem is i have when it gets to the gray bit with the progress bar as well as the one on the p.c it refuses to do it. Then comes up with the error then tells me to recover but it dont need to as the device started up and says skip if the colours dont come on.
I am trying to install the Radio v1.00.25.05 (Quad Band,Save Power and have better Network Connection!) "Highly Recommended"
The current one is 1.34.831.1
Click to expand...
Click to collapse
Do you use the non-developer edition of Hard-SPL?
If so you need a signed version of the radio update.
I have made signed versions of the radios available, you can find them here:
http://htcroms.aplace4u.biz/signed/radio/
You can safely upgrade/downgrade the radio without the device doing a hard-reset.
Im i still installing the same version v1.00.25.05 but this one is signed im guessing both are identical only that this one is signed.
I just flashed my Diamond with the: RUU_Diamond_HTC_NOR_2.03.409.1_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship.exe
I'm an norwegian that's in the US studying, so they only gave me the norwegian version. Anyways, everything worked fine until flash, but now my phone refuses to register on the network (AT&T)!
Took the sim-card back to the at&t nokia phone, worked the first time...
I really wants to use my Diamond instead of the crappy nokia, but it would be a shame to downgrade to 1.93 (which worked just fine...).
Someone, please have a solution for me?
simply install a new radio....try 1.00.25.07 that seems to be the only quadband radio..
(you have to flash an hspl before)
It's stuck on 0% and won't continue... Tried several roms :-/
no service?????
is there a soution to this no network problem
THERE IS A CROSS IN THE RECEPTION BAR AND WHEN YOU DIAL OUT IT SAYS "OPERATION FAILED"
any replies appreciated
Quite bad if the official RUU more or less bricks the device, at least turns into just a little computer
It screwed up my Diamond aswell The gprs is completely dead, been up all night trying to fix it, several hard resets etc, nothing helps... if it was a cooked rom I could tolerate it but official roms screwing up our phones this easily pisses me off.
Mine worked again, with the old 1.93 rom!!
What the hell did they do to 2.03? I suppose the radio rom is different at least... But I couldn't change to the old radio when I had 2.03, tried using the HardSpl...
Is it possible to flash _once_ with everything from 2.03, but the 1.00.25.05 radio (which is the one from 1.93)? Doing it sequentually doesn't work.
So what I did, as the final solution:
Flash with stock 2.03 rom
HardSPL
Flash with 1.05.25 radio
Works perfect!
Hmm i did the other way round with my o2 XDA Diamond (1.93 Stock)
1. Hard SPL
2. New Radio Rom (1.09.25.23)
3. 2.03 official Ger HTC Rom (without vendor lock)
works great as well
I've seen this issue a couple of times too. With 1.93 as well as with 2.03. Did not figure out what was the cause but never had a chance to bring the device back to life with some uninstallation or radio flash. I always went back to the SPB Backup from the night before it stopped working propperly.
Hello.
First, sorry for my bad English (French guy).
I make a SD flash with a Rom, and something strange occurs: my radio rom version change to 1.16.00.00. I try (always SD flash) to change it with a newer, the process looks good (the download bar increase, the device reboot) but the radio rom version always the same. I try to change OS rom, no problem. I try to change SPL version, impossible: all process executed without error but at the next load of SPL (power-camera-reset) the version is always the same (1.30 Olipro).
I try with another computer (Win XP pro SP2) and with activSync, the problem was the same !
And I try with several rom version, idem.
So to be quick
OS ROM change: no problem
SPL change: impossible
Radio ROM change: impossible
If someone have an idea, I will be very happy
Bye
I find the solution !
Usually, I toogle in SPL mode manually.
The soluce for me was to downgrade the SPL (1.30 to 1.20 olipro) but let the RUU launch is own SPL.
And after, the SPL version was 1.20 and I can change ROM, Radio ROM etc...
[Mode happy ON]
Bye
Hi, can you post the procedure please? I have the same problem!!!
But your pda statup?
Thx
Roby
i don't understand how that is accomplished.
i have read through the trinity guide and that is what they recommended
My trinity has been flashed with 1.3oli and a custom rom but it hangs at the start up page.This makes the device disconnect from the USB.
so how do i let the RUU launch its own SPL?
It is supposed to make the device go into bootloader right? i cant access that since it is hanged
Advice please
Hi bigrockshow,
it is impossible, in this condition that rru launch its SSPL, and it is ipossible to use the method sspl.exe ....
I think that the only way is the splxploit but I don't find a sspl file to load on p3600 with splxploit
anyone have it?
I've exactly the same problem, oli 1.30, I can flash OS roms with no problem but I can't get a radio rom to go past 0%.
I've tried the spl exploit to boot into spl 1.07, I've tried going into the bootloader manually and I've tried letting the RUU load the SPL, no matter what I do I can't shift the radio from 1.16?
Any ideas?
mine is just wierd...
i used SPLxploit and the spl jumps to 3.03...
tried to flash hard SPL and its has error 270...
so i did SPLxploit again...
shows SPL 1.20 now
Tried to flash another rom and it still doesnt work..
did i miss something or is my dopod screwed...
You can't upgrade to the 1.56.70.11 Radio with Olipro 1.3. It looks like it's worked and gets to 100% on mine but doesn't actually change anything. I ended up using another HardSPL (can't remember the name now) to get the 1.56.70.11 Radio on there.
I looked for ages for a version of Olipro 1.2 but couldn't find one anywhere. Apparently it works ok with that version.
Sometimes these threads are really hard to follow when they get massive and the author updates the first posts and over writes stuff. I think they should all keep old stuff in there and just add too it instead of replacing information.