For some reason when I installed a factory Cingular rom, it did not have the USB to PC icon.
Start\settings\connections[tab]\USB to PC
Enable advanced network functionality
I need to uncheck the 'Enable advanced network functionality'. Does anyone know the key in the registry to set this manually?
Another idea, is if someone would graciously send me the executable in the \windows folder for the Usb to Pc. I could just run that instead.
Thanks.
**---------------------------------------***
Well it turns out my whole problem with not being able to sync was a bad usb cable. I kept getting unkown device when my device was plugged in. Strange how I was able to update the rom to a Cingular WM5 rom, and then that same cable wouldn't work.
Same problem!
Does anyone know a registry hack?
Pls me need too! My device disconnects from activesync afterawhile!!
fgs, anyone help?
I couldn't find the USB to PC icon anywhere..
using Energyrom..
Related
I'm not quite sure this is the appropriate place to post, so forgive me if it isn't.
I remember some time ago, when still on my magician, that somebody had made a program so that, when connected to a pc via USB, the phone would be seen as a usb pen drive, directly accessing the sd card. I also remember it was only for WM5.
But I switched to Trinity, so now I'm looking for it through all of the forum: I hate to be the lazy b*stard, but I've been searching for the past hour to no avail: every time I key in usb, half of the threads in the forum show up, obviously...
So anybody remember what it's called?
Thanks for any help or indication
WM5Storage
After install you must goto settings> Comunications> USB to PC and uncheck that setting for WM5Storage to work properly. Hope this helps.
Thanks a lot for the quick answer you guys - you're simply great!
RebelShadow said:
After install you must goto settings> Comunications> USB to PC and uncheck that setting for WM5Storage to work properly. Hope this helps.
Click to expand...
Click to collapse
Just give me a error... "failed to disable RNDIS to use Serial"
you might need to shut down any background apps that are running. I had WisBar advance running when I tryed and it would not even bring up the screen. When I shut Wisbar down i was able to change the setting. could be a background app or today plugin that is interfering with it.
vdias said:
Just give me a error... "failed to disable RNDIS to use Serial"
Click to expand...
Click to collapse
I think it's probably AvtiveSync, which is almost always runnig in the background, that is causing the error when you uncheck the USB>PC setting.
vdias said:
Just give me a error... "failed to disable RNDIS to use Serial"
Click to expand...
Click to collapse
I solved this problem by deleting (temporary) my com connection to my bluetooth device (GPS).
DHCP client and RNDIS versus USB connection
As i tweak so much over time on my system, my DHCP client was turned off.
That's why my RNDIS device could not connect.
Through my local PC it needed to connect to the network DHCP server. CE seems to do this through XP's DHCP client services.
Turning these services on created the "advanced network connection" to work.
Big advantage to connect like this instead of turning off the RNDIS module and connect through 'normal' USB, is that my PC will now recodnize and automaticaly change from my private phone to my work phone (WM6.0 and WM6.1)
Network capability of my phone is achieved by having the right ip address in the 'external NDIS module' (networkcards). I had to do this manualy. Don't know why but; hey... Without network, still all Active sync options can be used, like installing or removing software, opening the mobile registry etc.
So: 6.1 can turn off the advanced network capability. My 6.0 with a lot of tools cannot.
But They both work better with my PC if I leave it turned on and turn on the DHCP client of my local PC.!
I hope this helps. It was a lovely solution after 5 hours of reading threads.
WM5torage is good program for that
http://rapidshare.com/files/217600230/WM5torage_189BETA5.CAB.html
Dwaalspoor98 said:
I solved this problem by deleting (temporary) my com connection to my bluetooth device (GPS).
Click to expand...
Click to collapse
gr8888888......it worked for me....thnxx
link death
neoneki said:
link death
Click to expand...
Click to collapse
You also can get WM5torage out of here ~ http://www.megaupload.com/?d=IUO1B3GD
Hey everyone I am really curious about how I need to go about accesing the internet throung the usb connection while my tilt is plugged in. I have read that previous versions of active sync had a feature called pass through which could be enabled / disabled at your choice. However in the current version of active sync this does not seem to be an option.
I basically just want to be able to browse the net on my tilt while I am connected to the pc via my usb cable.
Why because the at home internet connect is way better then the 3g network. This way I can download large files directly to my phone.
I have tried the registry edit as well as other methods. Still can't get the damn thing to work..
I am running the stock tilt rom directly from att. No mods no nothing. Also the version of active sync that I have came directly off the att tilt cd.
Please Help I appreciate your efforts in advance!
I have this workaround ( same situation with my X51V ) that you can try.
import the reg file or add the following key:
Code:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services]
"AllowLSP"=dword:00000000
Most works out of the box ( internet while activesync ... not sure why yours don't ... could be something that you did ??
anyway ... try the reg import and report back
I didn't do anything on mine and it is able to connect to internet through the USB whenever I connect it. WiFi is disable when the USB is connected.
earthman5678 said:
I didn't do anything on mine and it is able to connect to internet through the USB whenever I connect it. WiFi is disable when the USB is connected.
Click to expand...
Click to collapse
when setting up activesync ... the last window allow you to enable WIFI while connected to USB too ( if prefered )
or go into ( File -->> Connection Settings ) and check "allow wireless connection on device while connected to desktop"
yeah tried the reg hack before. didn't change anything for me.
I also messed with the advanced network functionality box under start settings> connections> USB to PC.
No worky for me.
Is there anything else you guys have done on the phone? Should there be any other entries under network management? RIght now I have listed
Media Net
AT&T ISP
My Work Network
MY ISP
If you haven't MOD anything like you've said ... I would suggest a hard reset ... and don't touch that USB to PC setting !!!
things should allow you to surf while activesync right out of the box !
UnicornKaz said:
If you haven't MOD anything like you've said ... I would suggest a hard reset ... and don't touch that USB to PC setting !!!
things should allow you to surf while activesync right out of the box !
Click to expand...
Click to collapse
for real OH Jebus Hard reset. Just great. Well atleast i don't have too much on my phone.
Any other suggestions?
In your PC ACtiveSYnc' connection settings, you will have a drop-down under name "This computer is connected to". Take out Automatic there and choose Internet.
Sometimes ActiveSync will not recognize that your PC has internet. Tell me if this was it in your case.
Regards,
Carty..
Carty said:
In your PC ACtiveSYnc' connection settings, you will have a drop-down under name "This computer is connected to". Take out Automatic there and choose Internet.
Sometimes ActiveSync will not recognize that your PC has internet. Tell me if this was it in your case.
Regards,
Carty..
Click to expand...
Click to collapse
yeah my man did that as well... maybe I will try the hard reset and see what happens
ive been curious about this also. mine just seems to default to my 3g connection...do i have to disable this for it to use the active sync connection?
Nope. When Synced, ActiveSync' net is on first priority!
Regards,
Carty..
I wonder if you have the networks proxy set in your default internet connection and when you connect via as it cant see the proxy nd thus wont allow connection...
interesting i tried out the newest rom on kaiser upgrade section...the att rom. i was gettin the same behavior. i loved the rom but was only bugged by that. i went to a new rom and fixed that problem. something with how att handles activesync cant do the job.
And ATT use a proxy...
unwired4 said:
And ATT use a proxy...
Click to expand...
Click to collapse
i tried the diasable proxy cab flying around...it was no good. I'm using a different rom right now. It only happened to me on that specific rom.
I would have thought you just need to check the connection settings and make sure no proxy is enabled.
regarding the Tilt and the proxy ... you could try out these 2 cabs at this thread ( 1 for disable ... the other is for enable )
look towards the end of the post ..."Sleuth255" had provided the cabs for you Tilt owners to fix the hidden proxy that is involved with AT&T Tilt
http://forum.xda-developers.com/showpost.php?p=1656670&postcount=1
if it works ... holler so that other Tilt owners can benefit !
UnicornKaz said:
regarding the Tilt and the proxy ... you could try out these 2 cabs at this thread ( 1 for disable ... the other is for enable )
look towards the end of the post ..."Sleuth255" had provided the cabs for you Tilt owners to fix the hidden proxy that is involved with AT&T Tilt
http://forum.xda-developers.com/showpost.php?p=1656670&postcount=1
if it works ... holler so that other Tilt owners can benefit !
Click to expand...
Click to collapse
Nice I downloaded the cabs. But before I launched them I took a look at my tilt for another second.
Keep in mind that I just did a hard reset and this is a stock att ship ROM.
Under start> Programs>Tools> There is a icon called proxy manager.
I clicked on diable proxy and did a soft reset. The problem is now fixed. I can browse the net while connected via usb through pass Thru.
Maybe the cabs do not need to be downloaded afterall as att already has them installed but thank you for the lifesaver!
Thanks people!
Hi,
I also used proxy manager to disable the proxy. Now whenever i connect my phone with activesync, it keeps connecting to the phone's GPRS (mediaNet). i look under the connections icon and it shows medianet connected, but not activesync.
anyone know how i can fix this to return to normal? i tried enabling the proxy again, but no luck.
HI,
I think I need the opposite
At work there is a very restrictive proxy that allows pie connections but, for example, does not allow to update the weather in HTC HOME.
There is a WIFI nearby that allows it...
Now, what I would like is to have my device ActiveSync'ed (so contacts, and so on are OK) while using WIFI for ineternet access...
Anyone knows if it is possible and how?
Thanks
Hi all,
I've searched the entire forum several times, but i cant find any solution for this so i would like some tips on how to fix this problem
First off, Activesync is working just fine, thats not the problem. But i would like to be able to update weather info and quickgps for instance by simply using activesync with the USB cable. All i get is a simple error "Can't connect".
my PC is a Xp x64 system, HTC has the original dutch rom installed.
please gimme some tips
You have to have Advanced Connectivity (or something like that) enabled in the USB to PC connection settings...
I have the same problem. When you don't have 3G connexion create internet work fine on USB.
But when you specify the network 3G for application which access to internet this does not work.
I need help to ! how to specify when 3G is not avaible (ActiveSync USB) use the work network for internet ?
You have to have Advanced Connectivity (or something like that) enabled in the USB to PC connection settings...
Click to expand...
Click to collapse
It's enable and doesn't work better
Any news ? someone find a solution. Many people reporting this problem on custom ROM.
Are you with T-Mobile by any chance?
No on vodafone.
krakout said:
You have to have Advanced Connectivity (or something like that) enabled in the USB to PC connection settings...
Click to expand...
Click to collapse
No it should be DISABLED to make it work, when enabled you will not be able to activesync when connected via usb. That was the problem here for me.
beserker said:
Hi all,
I've searched the entire forum several times, but i cant find any solution for this so i would like some tips on how to fix this problem
First off, Activesync is working just fine, thats not the problem. But i would like to be able to update weather info and quickgps for instance by simply using activesync with the USB cable. All i get is a simple error "Can't connect".
my PC is a Xp x64 system, HTC has the original dutch rom installed.
please gimme some tips
Click to expand...
Click to collapse
Check this.
http://forum.soft32.com/pda/Desktop-Pass-internet-connection-ActiveSync-WM6-ftopict65416.html
Open Registry Editor on your desktop (Start/Run and type "regedit") and locate the key HKEY_LOCAL_MACHINE\Software\Microsoft\Windows CE Services. Right-click on the value list and choose New/DWORD value. Type the name "AllowLSP" and leave the value zero. Disconnect and connect your device and Pocket Internet Explorer (and all other applications) will start working.
Click to expand...
Click to collapse
It simply fixes my problem with ActiveSync 4.5.
That registry thing works great, thanks a lot!
I also had this problem, and following this it was solved:
Open Registry Editor on your desktop (Start/Run and type "regedit") and
locate the key HKEY_LOCAL_MACHINE\Software\Microsoft\Windows CE Services.
Right-click on the value list and choose New/DWORD value. Type the name
"AllowLSP" and leave the value zero.
Disconnect and connect your device and Pocket Internet Explorer (and all
other applications) will start working.
Click to expand...
Click to collapse
http://forum.soft32.com/pda/Desktop-Pass-internet-connection-ActiveSync-WM6-ftopict65416.html
Hello! I have a touch diamond only 3 weeks old! The last few days my diamond has gone mad. It won't connect to any PC no more. Everything else works. I can charge the battery and use my handsfree but not sync it with my Pc. I've even tried different cables and different pc's with no luck Could this be a software issue or is it more likely a hardware issue? Btw I have the latest original ROM from HTC. Anyone else had the same problem?
Thanks
USB to PC
Hi!
I have a german version, but I try to explain. There is a "Fast synchronisation" option. You have to disable it.
You can find it in "Setup?" --> "Connection?" --> "USB to PC" ther you can disable it.
Greetings
I'm assuming you mean connecting via active sync??
I think it's Start > Settings > USB to PC > "enable advanced network functionality" or similar. It's random - try enabling or disabling. I think this is ROm version dependent.
Also in the Active Sync settings on your PC make sure USB is enabled. Check File > Connection Settings > Allow USB connections.
It always forgets this setting for me and is unchecked after each reboot.
Did you try turning off the phone and restarting your PC (I'm sure you did). Sometimes my Diamond is fussy about re-connecting once you remove it.
ratte01 said:
Hi!
I have a german version, but I try to explain. There is a "Fast synchronisation" option. You have to disable it.
You can find it in "Setup?" --> "Connection?" --> "USB to PC" ther you can disable it.
Greetings
Click to expand...
Click to collapse
Thanks! I've had problems with activesync. By enabling/disabling while connected to the computer it finally recognised the Diamond!
Thanks for all the answears! But I've already tried all that I'm afraid! Think I need to send it in to get it fixed! Can't see that this is a software problem
kjettern said:
Thanks for all the answears! But I've already tried all that I'm afraid! Think I need to send it in to get it fixed! Can't see that this is a software problem
Click to expand...
Click to collapse
Hi Kjettern, did you ever resolve your USB not connecting issue? I am having the same problem with my TyTNII...but mine was after an upgrade. thx!
i have 2 att tilts. Both of them used to connect to activesynce perfectly until last week. now only one connects and when i disconnect that one and try to connect the other one the phone just charges. ive hard resetted my phone, reinstalled acivesync, change usb cords and i turned off all of my firewalls. i dont know whats wrong. Please can someone help me get this going because i really want to flash a new rom. i have 3.29 hard spl and 1.65.24.36 radio and im using Pc. ultimate v 16 rom. my computer is windows xp. thank you
(1) After you connect the Tilt that will not sync, Open Tools>Options and see if you have anything selected. If that won't work, disconnect the Tilt, and in the AS window, open File>Mobile Device and select the one that don't work and then open File again and Delete Mobile Device. Reconnect the Tilt and create a new partnership.
(2) You won't need for sync to be working to flash, you just need for the circle to be green showing that the Tilt in connected to the PC and communication is possable.
Hope that helps.
make sure advanced networking is unchecked
Settings -> Connections -> USB to PC -> "Enable advanced network functionality" needs to be un-checked. Good luck!