I'm quite the newbie when it comes to ROM cooking, quite lucky to have a P4350 so I can mess around a bit w/o worrying about bricking the phone. I was able to flash the t-mobile dump using this method:
xander803 said:
I'll try to detail out exactly what I did. The rom kitchen was used for every single step. The directions provided with the program are not comprehensive but done well enough that you can figure most of it out.
1). Use the extract tool and choose "dump from bin" and dump the wing os bin posted on the first page. This dumped the contents to a directory in xdump.
2). After this "pkgtool" will run to separate out the sys and oem folders.
3). Move the contents of "xdump" (which should be the sys and oem folders and maybe a couple other files) into the "kitchen" folder.
4). Place the XIP folder and Aserg's os.nb, both of which are found in this thread, into the "ROM" folder. Aserg's os.nb will have to be renamed, check for details in the rom kitchen help file.
5). This is the step where cooks can delete/add stuff but I wouldn't recommend it your first time through.
6). Run "Build" and it should automatically create your new os.nb. We don't need to do any of the conversion afterwards because we can just put this os.nb in place of Aserg's os.nb and use his method to flash.
Please read through the rom kitchen's help manual as well as Aserg's help file for flashing the herald and make sure you understand exactly what you have to do. If you don't have an unbranded Herald it may be difficult to recover from a bricked device. I bricked my device several times before getting it but luckily I have an unbranded Herald so I could just flash an official WM5 WWE back on. Lastly, do this at your own risk, this worked for me but may not work for others.
Click to expand...
Click to collapse
What I wanted to know is what I would have to do to switch the T-Mobile rom with the PdaViet rom in this process of cooking. I have tried various methods, but have had no luck right now. The ROM image I create hangs at the initial bootscreen.
Also on another note, not sure why this is but when I extract the PdaViet rom and then compile it back together using the Pro Kitchen, the new image is always a bit smaller (like I missed something.)
Question: How did you CID unlock your device?
I didn't have to CID Unlock to upgrade.
Well I found out that its normal for the rom size to shrink using the Core Pro Kitchen, this is because of Tadzio's program. What I can't seem to figure out is why I can't flash the new build of the PdaViet rom without it freezing at the first splash screen. At first I thought it was the missing .rgu files found by , but I have found out that those were taken out for a reason, so that cancels out one potential problem.
We just have to wait a little more. Anichillus is trying to creat the Kitchen for the herald as he promised it. But now after exams he is in holiday. But after that he will present a new kitchen. Just wait a little.
And yes - his kitchen compresses the files more than other.
Keep on working and cooking. The Heraldforum needs it really...
I never liked PDAViet roms - so let´s creat own ones...
Thanks
Thanks for the update, and only reason I wanted to use the PdaViet rom is cuz it has the newest build. Guess I'll just work with k0ster's release.
Yeah man, i'll beta test any roms you create, I just paid to have my Wing CID Unlocked and i'm trying out PDAVIET's rom's now.
blackout203 said:
Yeah man, i'll beta test any roms you create, I just paid to have my Wing CID Unlocked and i'm trying out PDAVIET's rom's now.
Click to expand...
Click to collapse
Be careful. When it get bricked whiel falshing there is NO chance to unbrick with Herlad RUU!!!
Believe me and don´t try it
Hope you will allways have success while flashing with Asergs Method
blackout203 said:
Yeah man, i'll beta test any roms you create, I just paid to have my Wing CID Unlocked and i'm trying out PDAVIET's rom's now.
Click to expand...
Click to collapse
I thought you couldn't CID unlock the Wing.
^^imei-check. It worked so far. No other wing user has tried, I don't believe, i'm the first guinea pig.
So I just started to cook ROMs for the herald and I have to say it is a long and enduring process, but simple enough that anyone who wants to learn is able to do so.
For anyone else who is interested I am using the Core Pro Kitchen to build the roms, using this rom as my base (very clean-also good rom to load to your phone directly. Doesnt have missing files unlike PdaViet rom when running PkgTool.)
http://forum.xda-developers.com/showthread.php?t=319142
I also found a very useful selection of OEM cab packages that work with the herald for the most part. If they dont a simple edit will do the trick.
http://forum.xda-developers.com/showthread.php?t=319970&highlight=rom+kitchen+guide
Even a newb can cook up a rom using this method so there ain't no excuses.\
Cheers
So by all means all P4350 users start experimenting and cooking up ROMS so that Terra and Wing users have something to look forward to when they have an RUU.
Which version of Core Pro Kitchen are you using? The one for Hermes?
BRSG said:
Which version of Core Pro Kitchen are you using? The one for Hermes?
Click to expand...
Click to collapse
anichillus told me that the artemis version should work.
BUT write an pm to him and he will give you a link to his "Hyper Core Kitchen" the complete new one!!!!!!!!!
Give it a try
im going to try this out again and see if I can cook something up. I tried and actually created a rom be4 but was too scared to try it out. ill see if I can have a release by the end of the week but my computers been acting up. imma try to get the touchFLO working also.
neptune, post your cooked rom up or post some pics. did u do a traditional rom or one with the Touch home plugin and stuff?
http://forum.xda-developers.com/showthread.php?goto=newpost&t=323166
Would you be able to add that into your rom? It's a button free activation of the 3D Cube!
i'm currently cooking a rom using the Artemis kitchen, i'll post up how it goes, main issue for me is trying to make sure i'm putting packages in the right folder. I downloaded a .rar full of pre-mad packages so all I gotta do is drag and drop. i'm using k0ster's rom as a base but would love to use the official wm6 that was just released as a base as its newer and cleaner i'm guessing. we'll see, maybe we'll see some cooked roms from me soon!
blackout203 said:
i'm currently cooking a rom using the Artemis kitchen, i'll post up how it goes, main issue for me is trying to make sure i'm putting packages in the right folder. I downloaded a .rar full of pre-mad packages so all I gotta do is drag and drop. i'm using k0ster's rom as a base but would love to use the official wm6 that was just released as a base as its newer and cleaner i'm guessing. we'll see, maybe we'll see some cooked roms from me soon!
Click to expand...
Click to collapse
It should be better to extract the REAL WM6 rom with nbhextract and then start cooking the rom with the kitchen for Artemis (anichillus Core Kitchen??).
ANd be sure - in about one week there will be a new kitchen from him
But please use the real OS. Not a ported one!!
^Alright, i'll try that tonight. What is the major files that people remove? (Transcriber, etc.)
blackout203 said:
^Alright, i'll try that tonight. What is the major files that people remove? (Transcriber, etc.)
Click to expand...
Click to collapse
transcriber, autoupdate, sql
Thanks papamopps!
Will you please test out my rom when it is released
Related
Just thought I'd move to a more appropriate thread.
I'm afraid I've made no further progress and, since going back to work, have had little time to experiment.
The status is still that:
1. The Breeze and Cavalier are very similar at the hardware and software layers.
2. It IS possible to unpack the Cavalier ROM and re-flash to the Breeze using Hermes tools and the SSPL in this forum.
3. The real problem apears to be re-packing the XIP files within the ROM to fit the Breeze Memory map.
I haven't got 3 to work
darrellr said:
Just thought I'd move to a more appropriate thread.
I'm afraid I've made no further progress and, since going back to work, have had little time to experiment.
The status is still that:
1. The Breeze and Cavalier are very similar at the hardware and software layers.
2. It IS possible to unpack the Cavalier ROM and re-flash to the Breeze using Hermes tools and the SSPL in this forum.
3. The real problem apears to be re-packing the XIP files within the ROM to fit the Breeze Memory map.
I haven't got 3 to work
Click to expand...
Click to collapse
Ask if pof can help you out
sdamion said:
Ask if pof can help you out
Click to expand...
Click to collapse
He already has, as has 'SP3dev'
darrellr said:
He already has, as has 'SP3dev'
Click to expand...
Click to collapse
Can you upload the cavileer rom somewhere because the link in the other post isn't working any more.
sdamion said:
Can you upload the cavileer rom somewhere because the link in the other post isn't working any more.
Click to expand...
Click to collapse
You tell me where and I'll upload it.
darrellr said:
You tell me where and I'll upload it.
Click to expand...
Click to collapse
I just checked and it's still on the ftp site. I fear you'll need to try a hell of a lot harder if you want to learn and then carry out the XIP port
ftp://ftp.xda-developers.com/Smartphone/Cavalier/Shipped_Complete_Updates/Dopod/
Why i can't download from ftp://ftp.xda-developers.com/Smartph...Updates/Dopod/ it says permissions denied?
Sergey55555 said:
Why i can't download from ftp://ftp.xda-developers.com/Smartph...Updates/Dopod/ it says permissions denied?
Click to expand...
Click to collapse
Would you believe you need a password .... and to read the Wiki.
darrellr said:
Would you believe you need a password .... and to read the Wiki.
Click to expand...
Click to collapse
Would you believe you gave the wrong link its on the ftp xda-defelopers /Uploads/Smartphone/Cavalier/Shipped_Complete_Updates/Dopod/. But its al good.
darrellr said:
Would you believe you need a password .... and to read the Wiki.
Click to expand...
Click to collapse
I have a problem. I made some custom wm5 roms flashed them witout a problem. Nou i tried a wm6 rom. Flased the os only. It didnt boot. Only the bootloader. But now after updating to the 1.34 HTC rom. My phone won't boot. What did i do wrong.
Cavalier_DOPODASIA_WWE in my HTC MTeor?
I can put "RUU_Cavalier_DOPODASIA_WWE_1.16.707.7_1.43.50.00_108_Ship.exe" in my HTC MTeor???
Help me please, thank you
darrellr said:
Just thought I'd move to a more appropriate thread.
I'm afraid I've made no further progress and, since going back to work, have had little time to experiment.
The status is still that:
1. The Breeze and Cavalier are very similar at the hardware and software layers.
2. It IS possible to unpack the Cavalier ROM and re-flash to the Breeze using Hermes tools and the SSPL in this forum.
3. The real problem apears to be re-packing the XIP files within the ROM to fit the Breeze Memory map.
I haven't got 3 to work
Click to expand...
Click to collapse
Well, I'm on a week's break again. I sort of hoped that someone would have moved it on but I'm cool to give it a second bash. Hopefully someone has written an explaination on XIP porting since my last break .....
nice nice looks nice
Hi, there... as you maybe read in some other threads i sell my htc touch and get back to mteor...
so also i want to have a wm6 rom on my mteor...
i have done some testing but nothing coming to life...
also the reflashing to take a 2nd shot is very complicated because i have everytime to reflash the orig. 1,34er rom... sspl flashing didn't work for me...
also i read some of the posts about xip remapping... i have get into the xip today in the morning...
but i don't know how to remap the files!? but i hopefully have today (also @work) sometime to do some research...
as i read in the Blue Angles WM6 Developement Thread, it never has been so far that a wm6 rom from another device is working on the to ported device...
but... the cavalier hw is just looking very identically with breezes one...
only thing i found... the samsung processor, since it is the same "partnr." the clock speed is @400mhz, as i read on some pages about the cavalier?!
steve
Hi, there...
i have just extraced the xip parts from the rom now...
so now there a 2 problems...
when using dumpromx to extract i come to the files
when i using xipport i only get some files (eg. boot.rgu) and only folders of the modules (eg. coredll.dll)
with xipport extraction it is possible to reconvert to a xip.bin file... (i didn't tested it then to recopy the xip in the rom... )
while using dumpromx i haven't found any solution to recreate the xip.bin file... there comes always an error when using the option to "resave" the files...
good news! i hope that i can test WM6 for MTeoR in near future
p.s. sorry, i can't help you with xip because i didn't know about it
futureshock said:
Hi, there...
i have just extraced the xip parts from the rom now...
so now there a 2 problems...
when using dumpromx to extract i come to the files
when i using xipport i only get some files (eg. boot.rgu) and only folders of the modules (eg. coredll.dll)
with xipport extraction it is possible to reconvert to a xip.bin file... (i didn't tested it then to recopy the xip in the rom... )
while using dumpromx i haven't found any solution to recreate the xip.bin file... there comes always an error when using the option to "resave" the files...
Click to expand...
Click to collapse
hi,
i'm a complete newbie cooking roms, but i was able to decompile the nbh to nb then split it into its varios parts (radio, os, spl, etc...) using "rom koch"
http://forum.xda-developers.com/showthread.php?t=299297
it dumped correctly all files to a folder with a subfolder called XIP.
Maybe you can get it to work from there...
Thank's
Found another tool that may help...
http://forum.xda-developers.com/showthread.php?t=331094&highlight=g'reloc
1. G'Reloc - updated
Tool for boost rom cooking by autofixing and relocating ALL modules in IMGFS.
Dr. Martin Gonzo has made a Windows Mobile 6.1 ROM for the Vox. Can somebody try to port this to Wings?
Thanks and best regards,
SimonKnight6600
SimonKnight6600 said:
Dr. Martin Gonzo has made a Windows Mobile 6.1 ROM for the Vox. Can somebody try to port this to Wings?
Thanks and best regards,
SimonKnight6600
Click to expand...
Click to collapse
Must be alot missing from that ROM.. only 41,5 MB
it would be really nice if smone like gonzo will take care of wings software like hes doing on vox..
Okey. I flashed this OS to my wings.. cant realy see any difference?
Windows Mobile 6 Standard
CE OS 5.2.16.22 build: 18128.0.4.4
Does not look like 6.1 to me? strange..
Gonzo released several updates, for example here: http://forum.xda-developers.com/showpost.php?p=1997049&postcount=142. I would be nice if you could try to flash this one.
//edit: This post is more recent: http://forum.xda-developers.com/showpost.php?p=1997049&postcount=142
The Rom is missing "Xip.bin" so it is not extracted propertly...
SimonKnight6600 said:
Gonzo released several updates, for example here: http://forum.xda-developers.com/showpost.php?p=1997049&postcount=142. I would be nice if you could try to flash this one.
//edit: This post is more recent: http://forum.xda-developers.com/showpost.php?p=1997049&postcount=142
Click to expand...
Click to collapse
Okey, downloading.. Will check it out
My mistake here, I flashed an old rom..
Now tried flashing this 6.1 rom, and it just goes to 82% and stops..
I cant figure out why.. I extracted the .nbh file, recompiled it to wing220.
But still, no go... strange...
Alcaline said:
My mistake here, I flashed an old rom..
Now tried flashing this 6.1 rom, and it just goes to 82% and stops..
I cant figure out why.. I extracted the .nbh file, recompiled it to wing220.
But still, no go... strange...
Click to expand...
Click to collapse
There is an information that without any changes it is not possible to load it into Wings. Do you know which changes are neccessary?
phailo said:
There is an information that without any changes it is not possible to load it into Wings. Do you know which changes are neccessary?
Click to expand...
Click to collapse
Trying to figure it out here Trying to find a WM 6.1 kitchen.. I tried the Kaiser 6.1 kitchen but it does not run well here.. I need to extract all files properly.
guys, just wanted to say you should rather start from the source instead of starting from my rom which is still buggy and already a bit customised for the Vox.
You can download the original moto q update from my server here : http://ostiedbrosse.free.fr/Xda-Dev...GSZDRWNAPCNCMNSL003_secure_2803416007_1FF.rar
I found it on a chinese site.
BTW if you know of any other wm 6.1 standard version PM me.
Good luck on porting it to the Wings. It's not particularly difficultbut sometimes things don't work and you just can't locate the problem. + it takes a looot of time
Hi Dr. Martin Gonzo!
Thank you . Can you give us a short description which steps we have to do in order to port it?
Thanks,
SimonKnight6600
Finaly getting somewere here now.. But a big puzzle sorting out all the files..
Made some attemptes flashing the 6.1 version over. But the unit does not boot like it should..
Anyway, moving in the right direction at least
you have to at least replace coredll.dll in the xip and you can get rid of hd.dll, osaxst0.dll and initflashfiles.dat
Also don't forget to replace \.VM in \SYS with .VM from an original s730 rom.
If you have questions PM me, give a quick smmary of all you have done me and I'll try to help you.
Dr. Martin Gonzo said:
you have to at least replace coredll.dll in the xip and you can get rid of hd.dll, osaxst0.dll and initflashfiles.dat
Also don't forget to replace \.VM in \SYS with .VM from an original s730 rom.
If you have questions PM me, give a quick smmary of all you have done me and I'll try to help you.
Click to expand...
Click to collapse
Aha, great tips! I will try this later today. Thanks
Is there anyone who has the original HTC S730 ROM so you can always restore your phone?
I can imagine that you flash your phone with a cooked ROM and you don't like it that you want to go back to the original HTC rom, but I can't find it.
shiped rom
I think this is the original rom
http://forum.xda-developers.com/showthread.php?t=364783
any progress yet?
Surfboomerang said:
any progress yet?
Click to expand...
Click to collapse
No, sorry. Just havent had the time..
Flash Hard SPL before you try to flash any new OS to your device..
Hard SPL, USPL, SSPL, SPL.....
As far as I know I have to run a file on my phone to unlock the phone so I can install cooked Roms. The phone is then unlocked until you do a hard reset.
Please correct me if I'm wrong.
Anybody extracted all the cabs already?
Especially interested in the Manila version and all the AT&T add-ons.
Thx
wait. you actually want the att bloatware?
also, the tf3d stuff is only slightly optimized, if you're running any of the manilas out there that are updated recently, it should perform better.. especially if you actually use wm6.5
Yes, the bloatware incl. Manila to rewrite/update my Fuze setup guide.
I admit that I'm a little bit reluctant to flash my phoen back to the latest ATT since I kinda depend on it for the next two weeks and cannot run the risk to wreck it at this time.
i c... I can provide you the set up file, but I have no knowledge of how to extract it. If you are interested, send me a PM and i'll see if i can upload the link for you.
EDIT: the official update is actually really good. especially the radio. my gps fix is very very fast, and my battery life is great.. even with push..
I can download the EXE from HTC/AT&T myself but would need to install to copy all cab files under the Windows directory.
If anybody has all the cabs which reside after an install (better a de-böoated install) would be great.
The success with the GPS and good lock is simply related to the Radio bundled with the new ROM which is/was available at XDA for some time. Sure, for a branded ROM it was finally time to fix these issues.
yeah, i did mention that the radio was why the gps is so much better. I'm just a sucker for going around flashing new radios... It got to be so much of a hassle keeping track of them that I gave up..
anyways, sorry I can't help you there in terms of the cabs since I'm very uncomfortable with doing stuff like that since I'm paranoid about my phone numbers and notes tagging along..
but I can say with confidence that the new update is really good and you should not be worried about flashing the new rom at all. The only thing is that I see you are using energyrom so i understand that you don't want to flash back and forth.
Can you take a look in your Windows dir and name me the CAB files there?
Most common none is deleted after install so that list could be helpful already.
NRG ROM ... well ... it ROCKS.
I'm not such a fan of 6.5 yet thus running the older NRG 2.0 without ANY problems.
sure! that I CAN do.. here's the list (btw, my rom is unbloated so i might have all of the cabs..)
BlockBreakerDelux_105_signed.cab
DD2_GM_signed.CCAB
GetATTNavigator_NoTestAccount.CAB
GetMail_2008030_signed.CAB
HTCAP_Service_ATT.CAB
Java_Preloads_20090422_signed.CAB
JQ2_0-1-0_20080905_signed.CAB
MidnightPool3D_200801022_signed.cab
MobileBackup_1.0.1_signed.cab
MobiTV.3.0.4.68563_signed.CAB
mobivj.3.0.4.75845.CAB
Move_camera.cab
MSFT_SecurityPolicyWorkaround.cab
MsPacMan_20080910_signed.CAB
MusicID_1.3.25_signed.CAB
musicync_2_0_0_signed.CAB
PPC5.0 HTC COKE ATT.CAB
PT_BlackSCR.CAB
PT_Manila_REG.cab
removeHiddenProxy4CWS.cab
restoreHiddenProxy4CWS.cab
Sudoku_0.11.66_signed.CAB
WM6_PPC_HTC_Opera9_WWE.CAB
XMRadio.4.0.4.68563_signed.CAB
that's about all I see.. I might have some typos in the numbers but hopefully they should be all correct. Good luck and if you need anything else, just holler.
Cool mate! ... and this is from the latest AT&T ROM upgrade?
Would you mind to copy all the cabs to your PC and zip them in one humongous file? Check PM
i can do that provided that it isn't locked in by the OS. I'll do it later when I come back.
Thanks, check your PM (Private Messages).
Sorry to interrupt, but here you go:
http://rapidshare.com/files/249085596/CABs_from_New_AT_T_ROM.zip
Manila is not installed from CAB, so I created a CAB for it.
Thanks NATF.
Just one Q, what does then the PT_MANILA.CAB do?
Chefs like you never disturb!
tyguy said:
Thanks NATF.
Just one Q, what does then the PT_MANILA.CAB do?
Chefs like you never disturb!
Click to expand...
Click to collapse
Actually, you don't need that CAB. It is installed during Initial Configuration, and it adds the registry entries that start TF3D on boot. However, I added the required entries to my TF3D CAB.
Hey NATF....what happened to the OzIM cab? I was curious about this thread because I wanted to know if there were a new version of the cab for the instant messaging package as well....or did you just leave it out because the version didn't change in the new ROM perhaps?
please delete this post is obsolete
reserved maybe i need this
download it now !!!
Which version of wm6.5 do you use ?
Sorry for the n00b question, but is it possible to use this kitchen to re-build a ROM from extracted .raw files?
DavidMc0 said:
Sorry for the n00b question, but is it possible to use this kitchen to re-build a ROM from extracted .raw files?
Click to expand...
Click to collapse
yes
you can use it
Further noob question: How do I create a useable .exe file from a directory in this kitchen (e.g. sqmevent.exe). Is there a compiler of some sort included in the kitchen?
My ROM has lost this file and I am getting annoying errors, so I want to regenerate and replace it...
Cheers,
Jim.
nice to see you here Jerpelea!
witch version XIP for 6.5 are you using?
stock 21839
the one from test rom
is nice to be also here
Great work is good to have a bepes kitchen is more easy to porting builds for this one..
can anyone confirm if this work ok?
jerpelea said:
yes
you can use it
Click to expand...
Click to collapse
Aha. But how do you do that? I've been looking at this thread but I don't get it. There is no guide on the wiki and I cannot figure out what to de when I see the stuff inside the RAR. Care to help? Thanks
thanks i used ur x1 kitchen with no problems i cant wait/.
how can extract the .nbh and i take
OEM , SYS , and ROM folders with this kitchen?
Blablagedoe said:
Aha. But how do you do that? I've been looking at this thread but I don't get it. There is no guide on the wiki and I cannot figure out what to de when I see the stuff inside the RAR. Care to help? Thanks
Click to expand...
Click to collapse
I rebuilt a Kaiser ROM in the past (which took me ages), and spent a while trying to do this for my Rhodium ROM with no luck.
I was attempting to reconstruct a Vodafone ROM, which can now be downloaded from Vodafone, so I don't have much need to continue with it.
However I can see that a simple step by step tutorial would be very useful, and possibly a 'rebuilding' kitchen set up specifically for this task, ideally with a folder to put in the part.raws + base ROM, and then a script that did the rest would be marvellous!
Sadly I'm not clever enough to do this, but if you're reading this and it'd be easy for you to do, please share it
I was too deconstucting the vodafone rom that i downloaded, its quite lightweight compared to some other OEM roms but theres still room to strip some stuff out of it, i did try and use the packages i.e. OEM SYS and ROM with the Visual Kitchen along side the EXT folder from my extracted voda rom but that didnt work, all i want to do is get rid of packages haha,
That said i think i managed to get rid of goodle maps, deleted the folder in EXP for the package and used visual kitchen, searched all modules for google and removed any entries for google maps, it doesnt show up anymore, whether or not this means its is not installed im not sure but i cut 2MB off the rom size by getting rid of it...
Little by little (=
How cook with this rom????
i have copy SYS ROM and OEM on root of kitchen
and after that running 2_Create_ROM.bat
when finish open the htctool but the new os.nb have already deleted from the kitchen :S
any idea?
I dont use this kitchen as im not proficient with the whole scrypting/cooking thing yet
Id say if your learning then go for the Visual Kitchen, thats what i use as im just trying to understand how the file system etc works
please delete this post is obsolete
Has anyone tried flashing using JumpSPL. I suppose in thoery you should be able to use it on any device, and was wondering if it working for Imagio.
PS: Dump your orginal ROM before you flash a cooked one.
What are they chances it could brick my phone?
we would need a cooked rom first no?
It wont brick your device, as long as you dont flash not compatible SPL, Radio or OS. Need to cook an OS for Whitestone first and then flash. I can try it in my Rhodium, but it has HSPL already.
I am guessing it should work, as I do remember using this to flash HSPL on Kaiser.
It doesnt need to be cooked it. Just put in the device using activesync or file explorer after connecting to PC. Then u run JSPL. Flash the cooked ROM.
Once I've made sure I have insurence on my phone I'll cook up a rom and try this. If it works it would be a great hold off till a HSPL is made.
hackthis02 said:
Once I've made sure I have insurence on my phone I'll cook up a rom and try this. If it works it would be a great hold off till a HSPL is made.
Click to expand...
Click to collapse
Yup thats what I am thinking. HSPL would be great, but until then we all need a good cooked ROM. If JSPL works it will be awesome. Maybe Cmonex would be able to tell us if it will work...
I realized after googling a little. That I have no idea how to cook a rom. If someone can give me a stock WinMo 6.5 with Leo SenseUI rom, preferably with the compatible SPL and Radio. I'll be happy to try the JumpSPL. Or at least point me in the right direction.
if only more cdma windows 6.5 roms were out there. could you the tp2 rom be used as a starter?
davidstre said:
if only more cdma windows 6.5 roms were out there. could you the tp2 rom be used as a starter?
Click to expand...
Click to collapse
You cant interchange ROM between devices. It might cause to brick. So NEVER flash anything other Whitestone cooked ROM.
As a first step, you need to learn how to dump your phone and reconstruct it to a ROM just in case.
I am assuming VZW does not have an official ROM out yet!
The above link is for Rhodium, but not sure what will be different for Whitestone.
Then you take that reconstructed ROM, create your own kitchen with EV kitchen, and then start cooking!
But if VZW has released an official ROM, then cooking is real easy. Just get that ROM, dump and create a kitchen. Start cooking.
If you dont know what you are doing, then dont attempt this at all!
ai6908 said:
I am assuming VZW does not have an official ROM out yet!
Click to expand...
Click to collapse
look here
http://forum.ppcgeeks.com/showthread.php?t=89451
I already downloaded the rom dump and I've for the offical install from HTC. I just can't find where to download the EV kitchen.
I've got a rom dump and the offical install ship install from htc. I just can't find where to download EV kitchen.
Well that makes it real easy...here is the Kitchen tool that I use for TP2. Use that and dump the official ROM. Then, cook it again with your flavor, and try to flash using JSPL.
exciting times
I'll try building a rom tonight/tomorrow. I'll let you know. PS. Can you shot me a like to the Leo SenseUI. So I can add it to the rom. I just wanna change something so I know it's my rom not the OEM.
http://forum.ppcgeeks.com/showthread.php?t=96393
can you get what you need out of here?
No I don't think I can use it. It's a rom not a dump. I also download the stock Leo dump and don't know how to take the Manila files from that dump and use it on the Whitestone dump. Is there a wiki for this kitchen or something? ai6908 you seem to be on top of this any help?
Imagio(whitestone) rom dump here..http://forum.ppcgeeks.com/showthread.php?t=89422
Yeah, thats the dump I have. But sadly I don't know enought to make that dump into a rom. Adding Leo's Manila to it is simply to know its the new rom and not the stock one.
davidstre said:
http://forum.ppcgeeks.com/showthread.php?t=96393
can you get what you need out of here?
Click to expand...
Click to collapse
It has to be an official ROM. I know there was a link for official ROM posted before. Download that, dump it with Ervius Kitchen, then cook it again. Flash that and see if it can be flashed. I will see if I can do that when I get time.