Related
I have an unaltered 8125 and I loaded Voice Command 1.6 since it was supposed to enable A2DP. The headphones work great for phone calls but only occationally and sporadically for music playback. How do I get it to always work for music playback and not just as a headset for my phone?
PeeVee said:
I have an unaltered 8125 and I loaded Voice Command 1.6 since it was supposed to enable A2DP. The headphones work great for phone calls but only occationally and sporadically for music playback. How do I get it to always work for music playback and not just as a headset for my phone?
Click to expand...
Click to collapse
Hi, more info re: your 8125, would be helpful. IPL/SPL version, OS, BT device, etc. I realize you said unaltered but...
Thanks,
--M
More Info
Sorry, it is a G3 8125. I am using Windows Media 5.0 with Cingular's latest update from HTC. I am synching with a Motorola HT820. I used MS Voice Command 1.6 to get A2DP. (I think) active on my phone. The headset works very well for phone use and other Voice Command functions. However, I can only get music or movie audio to come over the headset when I double tap my headset to activate Voice Command. Otherwise, the sounds come from the phone and not the headset. Hope this helps.
Any of you guys had managed to get the voice commands coming out from your BT headsets using MS VC 1.6?
i.e. you press BT headset to activate VC 1.6, instructions from VC 1.6 comes through BT headset, you give instructions through Mic of BT headset.
I tried searching in the forum and only managed to find one thread here but that seems to be only applicable to Hermes.
Any help on this would be appreciated.
zard said:
Any of you guys had managed to get the voice commands coming out from your BT headsets using MS VC 1.6?
i.e. you press BT headset to activate VC 1.6, instructions from VC 1.6 comes through BT headset, you give instructions through Mic of BT headset.
I tried searching in the forum and only managed to find one thread here but that seems to be only applicable to Hermes.
Any help on this would be appreciated.
Click to expand...
Click to collapse
i am using 1.6
When i prees my Headset's button, Voice recognition turns on but my voice command is heard by the phone and not through the headset. Maybe this is how it was supposed to work? Seems that actually working through the headset would be to much of a convenience.
i actually tried to make it work, but until now I havent managed to dial via BT handsfree.
i am now using Cyberon, which does the same thing i.e. u press BT handsfree button, it activates the voice command, and you have to talk to the Phone.
I also make a VoiceDial softkey button...
I guess I have to be happy with this, since nothing else works.
MVC 1.6
MVC Ver 1.6 is working well with my PDA2K upgraded to Helmi's 2.6. I have I-Tech Clip S headset and I can hear MVC in my headset. Also streams music to my headset.
wizard327 said:
MVC Ver 1.6 is working well with my PDA2K upgraded to Helmi's 2.6. I have I-Tech Clip S headset and I can hear MVC in my headset. Also streams music to my headset.
Click to expand...
Click to collapse
What are the profiles you have for the I-Tech Clip S headset?
Is I-Tech Clip S headset with BT 2.0?
When you receive an incoming call, does the audio comes in from the headset or the ppc?
When you speak, does the audio goes into ppc mic or headset mic?
Thanks.
zard said:
What are the profiles you have for the I-Tech Clip S headset?
Is I-Tech Clip S headset with BT 2.0?
When you receive an incoming call, does the audio comes in from the headset or the ppc?
When you speak, does the audio goes into ppc mic or headset mic?
Thanks.
Click to expand...
Click to collapse
My PDA2K recognizes my I-tech Clip S as wireless stereo and Handsfree. When I receive an incoming call, MVC announces the call through my headset but sometimes, announcement is through the phone ( mostly through the headset). When I speak, audio goes to the headset mic. I'm not sure if my bluetooth stereo headset is BT2. Hope this helps
wizard327 said:
My PDA2K recognizes my I-tech Clip S as wireless stereo and Handsfree. When I receive an incoming call, MVC announces the call through my headset but sometimes, announcement is through the phone ( mostly through the headset). When I speak, audio goes to the headset mic. I'm not sure if my bluetooth stereo headset is BT2. Hope this helps
Click to expand...
Click to collapse
I just bought the I-tech Clip Radio. It too was recognised by my IIs with Xplode's AKU 3.5 rom as wireless stereo and Handsfree. On the other hand, MVC doesn't annoucee incoming call to my headset at all. My voice too does not go through the headset mic. Very sad!
Can't see your signature but I think you are using O2 Atom. Does it come with Microsoft bluetooth stack or Broadcomm bluetooth stack?
Can you check for me if this dll file is present in your Atom. Do you have Task Manager by DotFred ( http://buzzdev.net/component/option...option=com_content&task=view&id=86&Itemid=1)? If yes, please run it and go to Devices, and check if the following is Loaded or Unloaded?
$device\WAV8(WAV8 => Reg Key is Drivers\BuiltIn\BtA2dpSnd
Mine is not loaded and even if I try to load it, it won't load. When I try to look for the file in \Windows, there wasn't such a file. If you have this file, can you upload for me? BTW, what is the Rom that you are using, i.e. which AKU? You can find out this information from settings, system, about. Mine is AKU 3.5, and it reads as OS5.1.195 (Build 15698.3.5.0).
Next, can you check the build for MS VC? Mine reads as v1.60.4622
Thanks.
Curious if it works properly now with voice commands initiated and received over bluetooth plus incomming call announcements over bluetooth.
thanks
mpovolo said:
Curious if it works properly now with voice commands initiated and received over bluetooth plus incomming call announcements over bluetooth.
thanks
Click to expand...
Click to collapse
not really working for me, once I push the BT button - it ask for the command but the the BT disconnects ...
Works fine for me on my JX-10.
My Jabra BT8010 works well so far with voice command.
FYI; The default mode on the BT8010 is "music mode" This means if you push the large center BT8010 button into your head, it is the pause/play button for Media Player. Here's what you do.......
You have to press the (mode) button at the tip of the BT8010 once to turn off music mode. *icon will change on LCD screen) Now when you press the large center BT8010 button into your head, you'll then hear the voice command boobeep and it works great!
Turn on BT durring a call?
BT question:
Are we supposed to be able to activate our bluetooth headset durring a phone call already in progress? (you want to switch your headset on, in the midde of phone call) I was able to do this just fine on my iPAQ 6900. I noticed that if I activate bluetooth durring a phone call, the system/phone audio will not transfer to the bt headset unless I hang up the current phone call first. The system icon will show it's connected though! I then have to hang upt and call them back and my headset works as it should. This also happened on my 750 via WM5, but I was hoping the new 750 WM6 would fix this. (just updated)
Is this the same behavior for everyone else or is it somethign to do with my BT8010?
I can transfer calls to my Motorola H700 just fine, but I heard the BT8010 dont work quite right with WM. I was actually interested in getting the BT8010's pretty soon - how well does it work? Is the call transfering during a call problem the only thing you've encountered? I've heard it takes away your ringtone(only rings in the headset - not from the phone) can you turn a2dp on/off with ease?
I can turn on my bluetooth (Aliph Jawbone) during the middle of a call and it will transfer the call to the headset.
I can also use VoiceCommand over the bluetooth headset.
singhnx said:
I can turn on my bluetooth (Aliph Jawbone) during the middle of a call and it will transfer the call to the headset.
I can also use VoiceCommand over the bluetooth headset.
Click to expand...
Click to collapse
my jawbone will initiate voice command over bluetooth, but as soon as I hear the beep of voice command it disconnects...
at&t orange 750
wm6 leaked rom
hiwayfuzz said:
my jawbone will initiate voice command over bluetooth, but as soon as I hear the beep of voice command it disconnects...
at&t orange 750
wm6 leaked rom
Click to expand...
Click to collapse
same for me with motorola BT (HS500).
Strange. Mine allows me to say the command ... just tried it and dialed out to my brother.
I figured it out, I need to hit the action button my jabra before the audio is transfered over to the headset. (durring an already active phone call with bt turned on later/in the middle of it) This makes sense, since it allows you to control when the audio switches over in case you're not ready. In the past it was automatic. I remember a few times not having my headset on so it's better this way anyway. Everything works great.
Well VC is halfway working for me so far with my MotoHS850... I can make calls by speaking the name and then it dials fine. But VC is not announcing the Caller via BT, although I have that selected under VC settings.
I am also getting this odd behavior I described in detail here: http://discussion.treocentral.com/showthread.php?t=149924
I cant even get it to work without a BT headset... think it is my accent though.
For me, everything works fine so far using a Jabra BT5020 except for one thing. When I activate VC via the headset I get the prompt over bluetooth but then silence. The prompt then repeats over the handset, and it is only then that I am able to initiate a voice command. If I try to do it at the first prompt over the headset, the command won't make it to the phone. The commands are also not repeating over the headset. Anyone else experiencing this?
Jawbone, HTC/Cingular Tilt Voice Commander not working for me...
I too am having difficulties to get the Jawbone to activate Voice Commander v1.60.4622.0. It will start to open the phone connection but then that's it.
Also MS Voice Command is suppose to do more like open apps.; calendar, contacts, etc... nothing happens.
I know MSVC works, when I hit the activation button I set (which happens to be the Windows Start menu) it then will do the typical VC beep and then allow me to speak my command.
I'm thinking it's more a Jawbone thing. I did have it working on my 8525 but I killed that thing.
BT and VC work fine for me using Jawbone. You need to look at the help file on the Palm relating to the VC proper usage as it did not really work for me until I did some reading. There are very specific words you must use to get it to work i.e. Open Contacts FAILS but Show Contacts succeeds. Then Show "conatct name" will show you the person you are looking for. As far as initiating a call via BT headset, I press the Jawbone side button this gives me a tone then a pause then another tone then you speak your instructions i.e. Call John Smith, there will be a pause while the app looks for John Smith, then it will repeat the name to you and ask if you want to call John Smith at Home, Work, or mobile depending on what you have saved for that particular contact. I have noticed it isn't perfect. If you have a contact with a phonetically difficult name it would be wise to change the contact name to Bob B instead of Bettencourt as at times the VC doesn't understand the name spoken. Overall it works pretty good, much better than my old Razr and there is no setup involved just say the name and go.
Just wonder if Niki can support to have BT connection to A2DP BT Headset while using BT GPS receiver for GPS....
yes it works, although not stable when calling.
you may have to restart the bt headset a2dp. after conecting the bt gps antenna.
erkv said:
yes it works, although not stable when calling.
you may have to restart the bt headset a2dp. after conecting the bt gps antenna.
Click to expand...
Click to collapse
Do you mean that while i'm using the BT connected to GPS receiver and navigating... all the sudden a call came in... i can use the BT headset to answer the call... and the GPS will still able to track and navigating?
ZhenMing said:
Do you mean that while i'm using the BT connected to GPS receiver and navigating... all the sudden a call came in... i can use the BT headset to answer the call... and the GPS will still able to track and navigating?
Click to expand...
Click to collapse
Thats right - at least with the sony headset and tomtom set I use. Both work well all the time
Here it works fine a Logitech bluetooth stereo headset with mic and TomTom with a keomo 16 ch gps receiver, when your call is ended it activates the mediaplayer by itself, only sh*ty thing is that the logitech headset so now and then isnt receiving 100% , but its a almost perfect combination.....
Mine works fine, either with the Moto HS820 or the A2DP Jabras. However I wouldn't ever recommend using A2DP phones whilst driving - it cab be dangerous.
Your normal one-ear devices don't tend to stop you from hearing external noises, which can be essential for safety whilst driving.
that's true... having a2dp headphone in the car is dangerous... but if it's using the normal headset with the GPS that will be great!!!!
since in spain it is forbidden to use headsets while driving, either a2dp or calls, i use a parrot mk6100 w a2dp.
when using the a2dp thru my car stereo i can connect my gps bt antenna.
when the call comes everything works fine.
but, it gets some time to go back after the call (navigator + a2dp). and it is not that smooth. it seems like that is pushing too hard to the limits of the niki.
i read the answer is to restart the conection w the a2dp.
btw, i dont have installed the voices in the navigator so the navigator doesnt interfere w the a2dp.
i can keep trying if you have some other issues.
gps antenna issue blue tooth
hi,
I just boot a niki100, with orange provider in frence. i'm tryng to use a bluetouth gps antena.
both equipement are copled but when i'm launching the navigor the gps peripheric is shown bu the niki only durong approximatively 10 seconds.
I checked all configurable possible, including the verification of the alimentation rule.
i tried si antenna with anothet pda, it is working well. all tests were done without success.
someone could help me?
thank you.
try google maps
or other navigation software
should work
and check the ports btw, just in case.
sometimes they are paired but, not using the right ports may cause some problems.
#2 10-04-2008, 04:16 PM
Marcos Paolo
Junior Member Join Date: Oct 2007
Posts: 9
bluetoouth GPs antenna issue
--------------------------------------------------------------------------------
I tried the antenna with another pda, it is working well. all tests were done with success. I don't understand whynot with the niki.
I did a complementary test, I tried the niki with another gps antenna and it is working well too.
I conclud about a compability issue between my antenna and the niki. maybe due to the bluetooth version.
is it existing a .cab to update the bluetooth driver?
thank you.
not found yet
but keep posting, i am interested too.
any news?
after to have tried many rom and radio version, i finished to buy a new antenna bluetouth v2.
the newone is working. i will sale the oldone to someboday having older phone.
I use a gear4 blueye (can get one for about £20ish on ebay including postage) at the same time as using gps (a holux gpslim 240 with tomtom) in the car.
Plug it into the car stereo and can now listen to ipod music, change tracks, volume & pause+play the ipod safely.
And also make calls by tapping the button and using phone's voice dial, this further pauses any music I'm listening to whilst in call and resumes at the end of the call. It really is a super little device!
ps. if people are having any interface issues: slow hanging up etc.. after calls, then it's worth disabling whatever phone skin you have using 'Advanced Configuration'. The default skin plays much nicer with bluetooth.
I've in my car a radio with BT handfree.
Diamond work perfect with him but only for calling.
The connection is forever active but if i start tomtom the voice of this is in the phone and not in the radio.
If i receive a call tomtom don't speak but i can talk using the radio handfree.
I want listen the tomtom not in the phone ! I want listen it in the radio handfree BT.
Is't possible ?
With a nokia ck-7W handsfree-kit it ist the same problem. Use google for "Bluetooth Audio Router", it is a nice small Tool to get all sounds including the tomtom-voice on a bluetooth headset oder handsfree-kit.
I buy it on pocketland.de for ca. 6€ (~9$).
Meik
Try Diamond Tweak 0.5, there is an option under Bluetooth setting to use Audio Gateway or something like that think thats pushes the sound over BT. Haven't tested myself either but worth ago instead of buying some crappy accessory
I had the same problem. The problem is that most BT handsets only use limited BT profiles. The TD uses A2DP for most sounds, which is not supported by many handsets.
The answer I found was BTmusic, a little app that works fine. I now have TT directions and warnings coming over my audio system automatically.
BT music ? Sure ?
mc0676 said:
BT music ? Sure ?
Click to expand...
Click to collapse
Yep ... as I say it works for me and I can get TT's directions and warnings fine using my Parrot BT handsfree phone kit.