Cingular 8125 and HT820 - 8125, K-JAM, P4300, MDA Vario Software Upgrading

I have an unaltered 8125 and I loaded Voice Command 1.6 since it was supposed to enable A2DP. The headphones work great for phone calls but only occationally and sporadically for music playback. How do I get it to always work for music playback and not just as a headset for my phone?

PeeVee said:
I have an unaltered 8125 and I loaded Voice Command 1.6 since it was supposed to enable A2DP. The headphones work great for phone calls but only occationally and sporadically for music playback. How do I get it to always work for music playback and not just as a headset for my phone?
Click to expand...
Click to collapse
Hi, more info re: your 8125, would be helpful. IPL/SPL version, OS, BT device, etc. I realize you said unaltered but...
Thanks,
--M

More Info
Sorry, it is a G3 8125. I am using Windows Media 5.0 with Cingular's latest update from HTC. I am synching with a Motorola HT820. I used MS Voice Command 1.6 to get A2DP. (I think) active on my phone. The headset works very well for phone use and other Voice Command functions. However, I can only get music or movie audio to come over the headset when I double tap my headset to activate Voice Command. Otherwise, the sounds come from the phone and not the headset. Hope this helps.

Related

Need help setting MDA up to use BT headset for music player

Can anyone explain to me how to get my T-mobile MDA and my moto H605 BT headset to play music via microsoft mobile media player? I would prefer to have my BT headset and phone setup to where when the BT headset is connected all the audio sounds from the device are played through the headset.
Is this possible. I am not very good with alot of the technical stuff on this forum but, I think if it is laid out clear enough I can do what I need to do.
Thanks for you time, this site is awesome. Very helpful.

Microsoft Voice Commander 1.6 - Voice through BT headset

Any of you guys had managed to get the voice commands coming out from your BT headsets using MS VC 1.6?
i.e. you press BT headset to activate VC 1.6, instructions from VC 1.6 comes through BT headset, you give instructions through Mic of BT headset.
I tried searching in the forum and only managed to find one thread here but that seems to be only applicable to Hermes.
Any help on this would be appreciated.
zard said:
Any of you guys had managed to get the voice commands coming out from your BT headsets using MS VC 1.6?
i.e. you press BT headset to activate VC 1.6, instructions from VC 1.6 comes through BT headset, you give instructions through Mic of BT headset.
I tried searching in the forum and only managed to find one thread here but that seems to be only applicable to Hermes.
Any help on this would be appreciated.
Click to expand...
Click to collapse
i am using 1.6
When i prees my Headset's button, Voice recognition turns on but my voice command is heard by the phone and not through the headset. Maybe this is how it was supposed to work? Seems that actually working through the headset would be to much of a convenience.
i actually tried to make it work, but until now I havent managed to dial via BT handsfree.
i am now using Cyberon, which does the same thing i.e. u press BT handsfree button, it activates the voice command, and you have to talk to the Phone.
I also make a VoiceDial softkey button...
I guess I have to be happy with this, since nothing else works.
MVC 1.6
MVC Ver 1.6 is working well with my PDA2K upgraded to Helmi's 2.6. I have I-Tech Clip S headset and I can hear MVC in my headset. Also streams music to my headset.
wizard327 said:
MVC Ver 1.6 is working well with my PDA2K upgraded to Helmi's 2.6. I have I-Tech Clip S headset and I can hear MVC in my headset. Also streams music to my headset.
Click to expand...
Click to collapse
What are the profiles you have for the I-Tech Clip S headset?
Is I-Tech Clip S headset with BT 2.0?
When you receive an incoming call, does the audio comes in from the headset or the ppc?
When you speak, does the audio goes into ppc mic or headset mic?
Thanks.
zard said:
What are the profiles you have for the I-Tech Clip S headset?
Is I-Tech Clip S headset with BT 2.0?
When you receive an incoming call, does the audio comes in from the headset or the ppc?
When you speak, does the audio goes into ppc mic or headset mic?
Thanks.
Click to expand...
Click to collapse
My PDA2K recognizes my I-tech Clip S as wireless stereo and Handsfree. When I receive an incoming call, MVC announces the call through my headset but sometimes, announcement is through the phone ( mostly through the headset). When I speak, audio goes to the headset mic. I'm not sure if my bluetooth stereo headset is BT2. Hope this helps
wizard327 said:
My PDA2K recognizes my I-tech Clip S as wireless stereo and Handsfree. When I receive an incoming call, MVC announces the call through my headset but sometimes, announcement is through the phone ( mostly through the headset). When I speak, audio goes to the headset mic. I'm not sure if my bluetooth stereo headset is BT2. Hope this helps
Click to expand...
Click to collapse
I just bought the I-tech Clip Radio. It too was recognised by my IIs with Xplode's AKU 3.5 rom as wireless stereo and Handsfree. On the other hand, MVC doesn't annoucee incoming call to my headset at all. My voice too does not go through the headset mic. Very sad!
Can't see your signature but I think you are using O2 Atom. Does it come with Microsoft bluetooth stack or Broadcomm bluetooth stack?
Can you check for me if this dll file is present in your Atom. Do you have Task Manager by DotFred ( http://buzzdev.net/component/option...option=com_content&task=view&id=86&Itemid=1)? If yes, please run it and go to Devices, and check if the following is Loaded or Unloaded?
$device\WAV8(WAV8 => Reg Key is Drivers\BuiltIn\BtA2dpSnd
Mine is not loaded and even if I try to load it, it won't load. When I try to look for the file in \Windows, there wasn't such a file. If you have this file, can you upload for me? BTW, what is the Rom that you are using, i.e. which AKU? You can find out this information from settings, system, about. Mine is AKU 3.5, and it reads as OS5.1.195 (Build 15698.3.5.0).
Next, can you check the build for MS VC? Mine reads as v1.60.4622
Thanks.

Kaiser, MS Voice Control and Bluetooth

Can anyone with an early Kaiser device confirm that MSVC 1.6 works correctly with a bluetooth headset (that is, notifications route through the headset when connected, and commands work through the headset without hacks)?
This alone would cause me to upgrade from my Hermes...
Can anyone with an early Kaiser device confirm that MSVC 1.6 works correctly with a bluetooth headset (that is, notifications route through the headset when connected, and commands work through the headset without hacks)?
This alone would cause me to upgrade from my Hermes...
Click to expand...
Click to collapse
I second that request. I went back to my 8125 just because I liked this feature so much.

**HELP!** Problem with SE DS980 Music Streaming with TyTN II

Hi guys,
I have experienced a nagging issue with my SonyEricsson DS980 bluetooth headset.
Here goes: Cyberon Voice Command, A2DP and AVRCP works flawlessly but once a call is initiated, thereafter during or after the call, the DS980 disconnects itself. I have to manually connect the bluetooth headset to the TyTN II again to re-establish the music streaming (A2DP).
I have done several hard resets and also tried A2DPfix, Kaiser Tweak (Changing bluetooth quality to low) and also Jetware Bluetooth Extension with the supposed plugins, but to no avail...
Can someone help?
Can any registry hack / software help?
I have tried some tweaking with the BitPool and MaxSupportedBitPool but still din't work for me.
http://forum.xda-developers.com/showthread.php?t=352297&highlight=headset+disconnects
let's move this problem to one thread
caulirick said:
Hi guys,
Here goes: Cyberon Voice Command, A2DP and AVRCP works flawlessly but once a call is initiated, thereafter during or after the call, the DS980 disconnects itself. I have to manually connect the bluetooth headset to the TyTN II again to re-establish the music streaming (A2DP).
Click to expand...
Click to collapse
I also have a DS980 BT and same **** happens with me.
Last time my HTC music played crashed and all I could do was a soft reset Have tried different settings with no success.
If I'm not using the player then DS980 seems to disconnect after a call, at least the BT icon is gone.
However, when next call is received/initialized BT icon appears again and headset is connected.
Don't remember if it's still there after second call though.
Same problems I have too...
But my DS980 performs intermittently. Sometimes when a call comes in during playback, it flawlessly switches to the phone call, and then switches back to music after the call ends... However, this only lasts for a little while, and then it reverts back to the usual fault (headset disconnecting after a call and music plays through the device's speakers).
Sounds really silly... wonder what is causing it...
Please, is there someone here that can help us out? Must be some Bluetooth tweak that allows the device to rediscover the headset after a call....

[Q] using bluetooth headphones/ video

Hey all,
I have HD7 and listen to music when travelling, everything works fine. But just recently I attempted to watch a film and the sound will not play through the Bluetooth headphones, it transfers the sound to the speakers? Anyone know how to change this at all??
Dazza999 said:
Hey all,
I have HD7 and listen to music when travelling, everything works fine. But just recently I attempted to watch a film and the sound will not play through the Bluetooth headphones, it transfers the sound to the speakers? Anyone know how to change this at all??
Click to expand...
Click to collapse
Hi, I noticed the same issue on mine and there seems no way to change it.
I will offer a thought on why i think is happening.
On my other Android phones only the Galaxy S actually did a good job of keeping the audio and video in sync when using Bluetooth A2DP. The protocol has buffering in it so for audio its no problem but video can be tricky.
I think they just set it to not use Bluetooth for video audio to save complaints.
shame.
Russ
Hello, do you have the possibility to call a contact with the voice ( voice dialing) by the headset like on the HD1 ( and not on the HD2) ?
Thanks
edouardpremier said:
Hello, do you have the possibility to call a contact with the voice ( voice dialing) by the headset like on the HD1 ( and not on the HD2) ?
Thanks
Click to expand...
Click to collapse
I don't know whether you can activate the voice dialing using purely the headset, but you can use voice dial through a bluetooth headset. Just connect the headset and then hold down the start button until it asks you to speak. It works no matter which app you're using.
It also works without the headset.
bluetooth headphones
Hi,
To Russ, i previously had a Touch Diamond 2 and used these same headphones and it worked perfectly. I actually believe it has something to do with Zune and the player that they use?, it cant recognise that a headset is attached and therefore reverts to the speakers.
With regards to activating the voice dialing, with my bluetooth headphones which are Sony ericsson ones, it has an answer button, which when pressed with no incoming call it activates the voice dialling just as usual saying the same "Call mum".
adrian-polglase said:
I don't know whether you can activate the voice dialing using purely the headset, but you can use voice dial through a bluetooth headset. Just connect the headset and then hold down the start button until it asks you to speak. It works no matter which app you're using.
It also works without the headset.
Click to expand...
Click to collapse
Thank you, goood news because the HD2's bluetooth stack wasn't able to hear the voice dialing by the blutooth headset , and it only works only by the HD2's microphone.
Thank you
edouardpremier said:
Hello, do you have the possibility to call a contact with the voice ( voice dialing) by the headset like on the HD1 ( and not on the HD2) ?
Thanks
Click to expand...
Click to collapse
I am not sure if you are still looking for this, but YES, the voice dialing can be activated using the BT Headset. I have a Voyager Pro Plus and it works just fine.
As per the original thread title, I am having the same problem playing video files audio not getting transmitted via my BT Headset, So I called HTC to ask them what was the problem. They confirmed it is a software issue.
He said, it was a WP7 limitation. May be the future updates might get that feature, but right now it SUX. I am not sure how MS managed to F#$% this up. I am really Pissed. I was waiting for ever for this Headset so that I can watch my movies during my commute with the convenience of a BT Headset, now the whole purpose is lost.

Categories

Resources