Related
Hi. I tried to flash my kaiser to new Dutty's wm 6.1 rom (had Dutty's v3 before so i had hardSPL) and after the rom update process completed my kaiser died , screen is always black no matter i connect it to charger or push power, is there any possibility to bring my phone back 2 life?
Have you taken the battery out?
Have you tried flashing from SD card?
http://forum.xda-developers.com/showthread.php?t=336158&highlight=flash+from+card
Worked for mine when i bricked it.
i have taken battery out , it wont help. also flashing from sd card works only when u can actually power on the device and i cant do it. name of my rom wasnt RUU_signed.nbh it was : Ruu_Signed_Duttys_WM6.1_5.2.19716_1.64.08.21.nbh maybe thats the reason of error
Well did you try the special key sequence to try to turn it on?
special key sequence? U mean both softkeys and stylus into reset hole?
Can you get it to the HSPL screen?
hold camera button and stylus into reset hole?
If you can to there you can reflash it using the sc card method.
3. Plug the card into the phone, then enter boot loader mode by pressing down the Power and Camera buttons simultaneously, and using the stylus at the same time to press the RESET button at the left side. Continue pressing the two buttons for a few seconds after pressing and releasing the reset button until the bootloader screen appears. (taken from Wiki)
Click to expand...
Click to collapse
not the soft keys
thanx but it wont work, if i could enter bootloader i would just reflash the rom, but i cant get my phone on, screen is all the time black. if i plug in a charger there is no charging led too.
Ok, so your saying you tried it and it doesn't work?
im saying this doesnt work because my phone is totally dead. i cant get any response, it just wont turn on.
ok I'm taking it that you didn't try that sequence because you won't say that you tried it.
Hell no he/she ain't tried it. Probably has no idea what you are telling him to do.
Well Belizibub told him, I just started reading between the lines and noticed that he never admitted to trying it.
I love your avatar Tater.
can't all read, he can't turn it on, so how is he suppose to enter the bootloader or flash it from the sd card.
how come i try to enter bootloader , the phone is D E A D, it doesnt respond on any key cominations. i cant see even blank screen, nothing, it just wont turn on.
take the battery out and plug it into the charger, if a red light comes on thats a good thing if not then you probably have whats known as a "bricked kaiser" and sent it in for repairs or go buy a new one and save that one for parts.
marcini said:
can't all read, he can't turn it on, so how is he suppose to enter the bootloader or flash it from the sd card.
Click to expand...
Click to collapse
LOL, not even worth it.
So let me ask this, Why was this thread started? Was someone seeking help? Has someone provided the possibility of help? Do you think that the devils friend didn't understand that to this requester of help, that his phone appeared to be dead? Or is it possible the Devils right hand man knows something that the requester of help doesn't know and kindly attempted to share it with him, just to have the secret unlock code ignored.
Try up up down down left right left right a b select start.
That will fix your phone.
ps, what I'm getting at is if you haven't tried it then you need to try it. The special key config could possibly turn the phone on for you.
OK, now I see this same conversation going on in 2 different forums by the same person. Here and in Dutty's latest 6.1 release.
I noticed you are an Orange user. I have seen Multiple Orange users trying to flash radios to their phone and locking them up. I suggest looking/searching for one of those threads and see if they have a solution.
Hi all
I wanted to upgrade to Hard-Spl-OliNex . but when my phone went to black screen , Nothing happend . After it my phone screen is black .
I can't go to tricolor by pressing Vol down and Reset.
When I connect my phone to Charge , its tempreture increase but the LED not work.
When I press the power key , after about 30min its tempreture increase slowly , but nothing happend.
Please help me !
cant you do a hard reset? or try the unofficial rom with unofficial RUU, they may be able to force the flashing to your diamond.
i feel sorry for you
are you pressing volume down and centre button and the reset button?
Try hard resetting
Try the sequence various times it is tricky to get.
Hope all is fine
My Phone doesn't connect to pc .All the time , Its screen is black ,Even I wanna go to bootloader or Hard reset
If there's no output whatsoever on the screen (only leds blink) and you can't enter boot loader, then your SPL may be damaged.
You may want to PM Olipro to ask if he has a solution for this issue (e.g. flashing SPL for a CID-locked bricked Diamond).
Anyone has a Suggestion ?
try taking the battery out for 10 seconds.
it worked for me!
I take the battery , But not work
Sergio PC said:
Try hard resetting
Try the sequence various times it is tricky to get.
Hope all is fine
Click to expand...
Click to collapse
I have a Spint Diamond.
It will not hard reset. I'm following the instructions, and it will not take it.
Any ideass?
Thanks.
mikecism said:
I have a Spint Diamond.
It will not hard reset. I'm following the instructions, and it will not take it.
Any ideass?
Thanks.
Click to expand...
Click to collapse
If you connect your phone to Ac charger , Led indicator works ?
mamali_1382 said:
If you connect your phone to Ac charger , Led indicator works ?
Click to expand...
Click to collapse
The LED indicator (on Diamond, next to the earpiece) does not light up when AC adpater is plugged in.
The "HTC" icon does light up on the AC Adapter.
The Diamond does charge when plugged in to the AC adapter, even though the LED does not light up.
Ideas?
LED??
mikecism said:
The LED indicator (on Diamond, next to the earpiece) does not light up when AC adpater is plugged in.
The "HTC" icon does light up on the AC Adapter.
The Diamond does charge when plugged in to the AC adapter, even though the LED does not light up.
Ideas?
Click to expand...
Click to collapse
The LED next to the ear piece isn't an LED, it's an ambient light sensor to adjust the backlight when set to 'Automatic'... thus, it doesn't light up EVER! The charge indicator (at least on my Diamond) is the white 'circling' of the enter button (centre d-pad).
LED of your ac charger is ON if you connect Charger to power .
But When you connect your phone to Charger , Led that around the enter butten should be lightening.
Does it happen ?
Sprint requires: Pwr Button, Volume Down, Center Dpad, and Reset
jreach said:
Sprint requires: Pwr Button, Volume Down, Center Dpad, and Reset
Click to expand...
Click to collapse
That did not work. Anyway, phone defective, back it goes to Sprint.
jreach said:
Sprint requires: Pwr Button, Volume Down, Center Dpad, and Reset
Click to expand...
Click to collapse
Thanks for this info...too bad they couldn't get it right in the manual...
mikecism said:
That did not work. Anyway, phone defective, back it goes to Sprint.
Click to expand...
Click to collapse
Reset your phone when you hold Volume down butten and hold it untill the tricolor screen appear .
Then you can install roms .
I have the same problem, any idea???
Had the same, what I did was very simple: simply pressed the reset button and it installed it self without problems. But I was close to the end, I suppose...
Hey Folks,
well I've experienced a very bad problem. When I started to change my ROM again, my whole device hang up, nothing happened any more. No chance to do a Hard or Soft Reset, the Led-Ring does not even light up anymore when I plug in the USB. Neither via Notebook nore via outlet. I don't know whatelse to do, hopefully it's not dead...
Thx for all the answers and sry for my bad english...^^
can you enter in bootloader mode? if you can, it's everything ok.
Remove the battery for 30 seconds then replace it and see if it will then respond to any of the following... on switch/usb cable/bootloader mode/hard reset.
Well... the Diamond doesn't respond to anything... It isn't even recognised by Windows...
phr3n1c can you enter in bootloader mode with it? pressing volume down (on the left side) and reset in the same time, and keep holding untill 3 colour screen appears.
Nothing happens... OMG i could start crying...
WTF! If don't enter even in bootloader, I only can say that its totally bricked. Sorry
How could this happen? I just tried to install juices RoM, then it said that this isn't the right ROM for my Device, turned off the screen and.... nothing...
So there's no way for me to get this Diamond working again... I just got it for 3 weeks... 469€... mmh...
Keep trying to get bootloader mode...its very fiddely....
also try and charge your battery...was it at full charge before?
phr3n1c said:
How could this happen? I just tried to install juices RoM, then it said that this isn't the right ROM for my Device, turned off the screen and.... nothing...
Click to expand...
Click to collapse
Don't give up hope just yet, I've seen a few people on here that thought they bricked their Diamond but a few of the major contributors of the forum were able to work them out of it. Not saying it's a guarantee of course, but definitely a possibility.
2nd what the guy above me said, just hold volume down and the power button and try to get to bootloader mode... You should really be able to get to this, and once you can you'll be all set.
So the best thing for me is to leave this Thread here and wait for some answers I can try out...
Well... I use to read in this board since February and I always found all the answers to my questions...
This is the fact y this is my first post as well^^...
so i think i'll leave my xda alone 4 a while...^^ thx for all answers, upcoming and read...
mmh.. so there's nobody who's got any idea... thought more people could help me... mmh...
phr3n1c said:
mmh.. so there's nobody who's got any idea... thought more people could help me... mmh...
Click to expand...
Click to collapse
Do you flashed Diamond HARDSPL-OliNex first ?
ady_uaic said:
phr3n1c can you enter in bootloader mode with it? pressing volume down (on the left side) and reset in the same time, and keep holding untill 3 colour screen appears.
Click to expand...
Click to collapse
That is NOT the way to get into bootloader mode, if you have been trying that then there is no way you will enter the tri-coloured screen,
You need to press the power button as well as the volume down button along with the reset button to get into bootloader mode.
1) Take of the back cover of your diamond
2) Take out the stylus, notice a red dot in the bottom left corner? thats the reset button
3) Get your stylus ready to press the red reset button, but don't press it yet
4) Press and hold the POWER button and the VOLUME DOWN button, as well as holding down and pressing the reset button
5) After 3 seconds, let go of the red reset button but KEEP holding down and pressing the POWER and VOLUME DOWN buttons
6) Once the tri-coloured screen (bootloader) comes up, you can let go of the buttons.
That is how to get into bootloader mode, in depth. If that is not working that you have damaged your device quite a fair bit.
Remember if you didn't try pressing the power button to get into bootloader mode before, then there would have been no way you could have gotten into bootloader - try this method now and you might (hopefully) be flashing a new ROM in a matter of minutes.
Good Luck!
what can i say..? nothing happens... don't know whatelse to do now... but... can the ROM really damage the diamond that far that it doesn't even light the LED ring under the screen if i plug it into the USB...
damned... whatelse to do now...? sell it on ebay?
phr3n1c said:
what can i say..? nothing happens... don't know whatelse to do now... but... can the ROM really damage the diamond that far that it doesn't even light the LED ring under the screen if i plug it into the USB...
damned... whatelse to do now...? sell it on ebay?
Click to expand...
Click to collapse
Another reason why I stay away from eBay.
Did unplug the usb cable, then pull out the battery ?
Hhmm.. I wouldn't have thought a ROM could cause so much damage.
You could try this..
1) Leave the battery out for 30 minutes
2) Put it back in along with the charger
3) Try to turn on the device (hold the power button down for 15 seconds)
Selling the device on eBay should be your last resort. Try everything you can to get the device working for now.
phr3n1c said:
what can i say..? nothing happens... don't know whatelse to do now... but... can the ROM really damage the diamond that far that it doesn't even light the LED ring under the screen if i plug it into the USB...
damned... whatelse to do now...? sell it on ebay?
Click to expand...
Click to collapse
DO YOU FLASHED HARDSPL FIRST ? AND DOES YOUR DIAMOND IS UNDER GUARANTEE ? IF NOT, YOU CAN THROW AWAY.
Hold Volume down, the Enter Button and then press Reset... Hold the Volume down and the Enter button until the three colour screen appears... Try it....
Look here:
http://blog.jannewap.ws/2008/07/25/htc-diamond-reset-xda-diamond-hard-reset-anleitung/
yes, i flashed hardspl first... i dont know if it is still under guarantee if i bricked... doesn't another rom make your guarantee end? so nothing else to do...
PS: if i would have sold it on ebay, i had declared it as broken... just by the way... not to have any people think wrong things about me...
I was scanning to see if it had recovery for my phone.As I was scrolling down their list, my finder sliped and selected recovery of different phone and installed it., my phone bleeped a few times with black screen.
I tried to switch on using power key, but it will not power.
I then took the battery out and used Vol down key + power to reboot into bootloader. Nothing happed, phone just bleeps few times. Still black screen.
Need urgen help please.
Pull battery for 15min and try again. If nothing happened go to service. Or try install the ruu for your country.
Sent from my HTC One X using xda premium
stona175 said:
Pull battery for 15min and try again. If nothing happened go to service. Or try install the ruu for your country.
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
Thanks for your reply. I have tried hard reset after taking out the battery without any luck. I can not install the RUU as the phone is dead, black screen. Battery was fully charged. I did a bad flash by accident via rom manager.
Anyone out there with similar problem and found the solution, I do not need another expensive door stopper.
rlamba said:
Thanks for your reply. I have tried hard reset after taking out the battery without any luck. I can not install the RUU as the phone is dead, black screen. Battery was fully charged. I did a bad flash by accident via rom manager.
Anyone out there with similar problem and found the solution, I do not need another expensive door stopper.
Click to expand...
Click to collapse
If you can go to bootloader or make factory reset (vol down + vol up + power) and something showing on the screen you can install ruu.
If you can charge the battery (led is shining) its mean you need only j-tag :d
If nothing with this. Its mean your memory is dead.
I had this issues on my friend phone. But there was no led and no vibration. Realy dead
stona175 said:
If you can go to bootloader or make factory reset (vol down + vol up + power) and something showing on the screen you can install ruu.
If you can charge the battery (led is shining) its mean you need only j-tag :d
If nothing with this. Its mean your memory is dead.
I had this issues on my friend phone. But there was no led and no vibration. Realy dead
Click to expand...
Click to collapse
The screen is black. So hard reset does not work. Total dead, the screen does not light. When you do factory reset, the phone make 5 or 7 beeps like when phone is vibrating, then it is dead, no response. I think I need to have J-Tag.
So i was playing gta sanandreas on my z1 and it suddenly turned off itself..it had 68% battery when it shut down..so i tried to turn it back on and it does NOT turn on..i tried charging it a complete day but still nothing..i tried wall chager magnetic cable pc and even power bank..still nothing exept for the red notification light..tried to bring it back to life by using pc companion and flashtool and the laptop doesn't even connect with it..that means it's totally dead..i don't know what to do and i need my z1 back...plzz help me guys..and sorry for bad english
Have you tried vol down and power button to see if vibrates and then powers on if not try it and try power and vol up = hard reset
Yes sir i have tried that but the phone doesn't vibrate
superdroid xtereme said:
Yes sir i have tried that but the phone doesn't vibrate
Click to expand...
Click to collapse
Try to connect your phone to PC while pressing on vol. Up
And wait for blue light
If you see blue light ....
You have a chance
Note: be sure that your drivers installed on PC
DectonX said:
Try to connect your phone to PC while pressing on vol. Up
And wait for blue light
If you see blue light ....
You have a chance
Note: be sure that your drivers installed on PC
Click to expand...
Click to collapse
Tried just as u told but still nothing..only thing that my phone does when connected to a power source is showing the red led which dies after minute or two...i've tried replacing the battery but still nothing..
may seam a daft question i am sure you tried it but worth a wright up any way, there is a little red reset button next to the sim card tray if you push that in it is like a reset on the phone
tennysonmobile said:
may seam a daft question i am sure you tried it but worth a wright up any way, there is a little red reset button next to the sim card tray if you push that in it is like a reset on the phone
Click to expand...
Click to collapse
Already did..nothing happens!!!!!!!
Plzzz somebody help meeee....anybody????