Related
i know that this topic was solved here previously, but i couldnt find it inspite all of the search efforts... so i really appreciate the effort if u can help me solve the problem or guide me to the topis that it was solved in.
whenever i open an sms to read it or try to compose a new one i get a white screen and i cant view or type anything.
my device PDA2K
ROM Version 5.03.02 WWE
ROM Date 03/02/05
Radio Version 1.13.00
Protocol Version 1337.42
i even installed the newsest BA_WM05_patch 2 and fixes from here...
thank u in advance
i downgraded to 2003se, file explorer, emptied the folder called (storage) where the wm5 saves it self, upgraded to wm5 BUT WITHOUT the MMS fix and it worked perfectly, while on another bluangel (for a friend) i upgraded his BA to WM05 including the MMS fix, the .net frame work 22 and the local settings for the service and it is working fine... so is it cause of MMS or not?
shall i take the risk of installing the MMS with the frame work and setting without worrying about going throught the cycle again?
please advice
Hi everybody,
Basic Info
Here it is, finally, the first RC (Release Candidate) version of AKU 3.2. This ROM contains the following:
- AKU 3.2 ROM based on the T-Mo 2.26 ROM
- Cingular 2.25 radio (since it is the best)
- Totally empty extended ROM (since this is a clean base ROM)
- Cingular bootscreen (because, uh, blue looks much better than pink )
- NO IPL/SPL so G4 owners can flash it as well
What's new in AKU 3(.2) since AKU 2.3?
- 2x zooming for videos in WMP (added in AKU 2.6)
- Slightly faster device
- Slightly improved boot time
- AKU 3 improvements are:
- Internet Sharing utility instead of Modem Link
- WPA2 support for WiFi Note: not working yet
- Improved BT Stack
- vCard support in SMS
- SMS can be saved to the SIM Card
- SMS over GPRS (if your provider supports it)
- MP3 ringtones for everything (Phone, SMS, events) Note: not working yet
- Improved welcome exe (can skip tap'n'hold tutorial, can set up email account, can set the time)
You can read more here.
Requirements
You MUST have a 2.x IPL/SPL on their devices. If you have 1.x, install first a 2.x ROM that has one.
Known bugs
- There may be problems with ActiveSync internet pass-thru
- Microsoft Voice Command will not work.
- No A2DP
- No WPA2
- MP3 still only for Ringtones
- Problems with SPB Pocket Plus
Disclaimer
While it is really hard to brick your device with this package (since it is not touching the bootloader aka. IPL/SPL), still, standard disclaimer applies: Flash this ROM at your own risk!
What's next?
When I'll have enough time I might make a ROM with extra stuff but that ain't gonna happen till this weekend or so.
Download
WM5 AKU 3.2 ROM version 1.0 RC1 for HTC Wizard (49.5 MB)
Extra note
This rar was created with WinRar 3.6 final. It is possible that you get errors at decompressing with older version so if that is the case, go to http://www.rarlab.com and install the latest version the try again.
GREAT WORK KTAMAS!!!!
Downloading now... I'll let you know as soon as i'll have it installed!
Bye!!!
PS: Is the CF2 included in this rom? If it is not and you want to integrate it, i can send you the files and a cab containing the necessary registry entries.
Bye
risidoro said:
GREAT WORK KTAMAS!!!!
Downloading now... I'll let you know as soon as i'll have it installed!
Bye!!!
PS: Is the CF2 included in this rom? If it is not and you want to integrate it, i can send you the files and a cab containing the necessary registry entries.
Bye
Click to expand...
Click to collapse
No CF2. Sure, you can email me the packages, thanks.
KTamas said:
No CF2. Sure, you can email me the packages, thanks.
Click to expand...
Click to collapse
I'll send you shortly.
So far:
Activesync USB (NDIS): OK
WiFi: ok
GPRS: ok
Phone: ok
Bluetooth: not yet tested (BT PAN is supported! Great!)
MMS: you need to enable it using one of the cabs found in the 2.26 extrom
All default programs are ok!
SO FAR IT'S GREAT!
Hot! I'm going to be giving it a shot shortly here.. Going to go download it now..
EDIT: Hot.. Upgraded now.. Like the green.. Will be testing everything out very very very very soon here..
Great job, guys!
Damn, i don't have my Wizard at the moment.
Looking forward to get it back and try this stuff!
I always get error 224... what am I doing wrong?
digitaly said:
I always get error 224... what am I doing wrong?
Click to expand...
Click to collapse
What is Error 224 exactly? :roll:
finally working aku 3.2
just flashed on cingular 8125, everything seems fine
Extened Roms
Hi there, I'm a bit of a newbie. How do I install an extented rom?
Ta, Rin.
Connectivity Issues.
I have a Cingular 8125.
Upgraded from AKU 2.3 (TMO USA 2.26 OS) to this.
==================================
THE GOOD:
ActiveSync works fine syncing data with my PC.
SMS (Text Messages) work both in and out.
Phone Works.
Bluetooth Works with my normal headset (Jabra BT500).
THE BAD
Internet connection won't work. I have proper GPRS Settings for Cingular (tried both ISP & WAP settings) but the connection fails always (saying the answering modem has disconnected).
When I try to use AS Pass-through it simply can't find the page.
I have tried your ROM, but unfortunatelly it flashed only bootimage (Cingular) and cleared ExtROM from Vario (from T-Mobile CZ) of my boss...
Any help? Thanks.
i added this to my beta rom.. i am installing now to test
Re: Connectivity Issues.
kyphur said:
.
THE BAD
Internet connection won't work. I have proper GPRS Settings for Cingular (tried both ISP & WAP settings) but the connection fails always (saying the answering modem has disconnected).
When I try to use AS Pass-through it simply can't find the page.
Click to expand...
Click to collapse
as pass-through and wi-fi working for me. didn't try gprs
Re: Connectivity Issues.
kyphur said:
I have a Cingular 8125.
Upgraded from AKU 2.3 (TMO USA 2.26 OS) to this.
ActiveSync works fine syncing data with my PC.
SMS (Text Messages) work both in and out.
Phone Works.
Internet connection won't work. I have proper GPRS Settings for Cingular (tried both ISP & WAP settings) but the connection fails always (saying the answering modem has disconnected).
When I try to use AS Pass-through it simply can't find the page.
Click to expand...
Click to collapse
Hmm, I've set up my GPRS account and first it connected, but didn't load anything. Did a soft reset, now it works well.
Re: Connectivity Issues - GPRS Dead
itissat said:
kyphur said:
.
THE BAD
Internet connection won't work. I have proper GPRS Settings for Cingular (tried both ISP & WAP settings) but the connection fails always (saying the answering modem has disconnected).
When I try to use AS Pass-through it simply can't find the page.
Click to expand...
Click to collapse
as pass-through and wi-fi working for me. didn't try gprs
Click to expand...
Click to collapse
I did a soft reset and AS Pass-through is now working. GPRS is still Dead though.
KTamas said:
digitaly said:
I always get error 224... what am I doing wrong?
Click to expand...
Click to collapse
What is Error 224 exactly? :roll:
Click to expand...
Click to collapse
I unlock the cid... after I click on PDA Phone ROM Update utility I get this error 224... but my phone sync and I can read all the files from my computer no problems... It's must be a problem related to the my activeSync 4.2.0
Re: Connectivity Issues.
kyphur said:
I have a Cingular 8125.
Upgraded from AKU 2.3 (TMO USA 2.26 OS) to this.
==================================
THE GOOD:
ActiveSync works fine syncing data with my PC.
SMS (Text Messages) work both in and out.
Phone Works.
Bluetooth Works with my normal headset (Jabra BT500).
THE BAD
Internet connection won't work. I have proper GPRS Settings for Cingular (tried both ISP & WAP settings) but the connection fails always (saying the answering modem has disconnected).
When I try to use AS Pass-through it simply can't find the page.
Click to expand...
Click to collapse
It seems that AKU3 has a nasty bug: it fails to connect to a GPRS APN if it requires username/password. GPRS works for me cause my provider needs no UN/PW.
Edit: On the other hand, AS Passthru is not working for me.
beecher said:
I have tried your ROM, but unfortunatelly it flashed only bootimage (Cingular) and cleared ExtROM from Vario (from T-Mobile CZ) of my boss...
Any help? Thanks.
Click to expand...
Click to collapse
What IPL/SPL version do you have?
Re: Connectivity Issues.
KTamas said:
It seems that AKU3 has a nasty bug: it fails to connect to a GPRS APN if it requires username/password. GPRS works for me cause my provider needs no UN/PW.
Click to expand...
Click to collapse
Is this documented anywhere?
If that is the case then it looks like I'll probably have to exclude myself from this project (which would blow chunks).
you will require a password to access the rom[only by email].depending of the feedback in the next few days,the roms will be made public.
all tester that applied will receive an email with the instrucions.
and i dont need to remind you that your device need to be cid unlocked to avoid problems.
download 12mb paging pool from here
download 8mb paging poll from here [coming shortly]
Change log for beta-4
Button issue fixed
Htc calendar fixed
Smart flash –app to play swf files
Updated total commander
Updated task manager
Updates battery status
Updated core player
New startup image
Removed 2 problematic apps
PDF icon fixed
Some adjustments under the hood
Flash7 bug fixed
New performance tweaks
More operators cabs- [see the end o the document[
Bluetooth stereo is in this beta and working by default, so no need for extras cabs. Just pair your device.
i can also confirm that this ro works with dual sims cards
operators setting in the rom for;
USA
[USA_Cingular ]
[USA_T-Mobile_VPN]
[USA_T-Mobile_WAP]
UK
[UK_O2_Contract]
[UK_O2_PAYG]
[UK_Orange_Contract]
[UK_O2_Contract]
[UK_Virgin]
[UK_T-Mobile]
[UK_Jersey_Telecom]
[UK_cable&wireless]
FRANCE
[france-SFR]
[france-Bouygtel]
[france-OrangeWorld]
Portugal
[Portugal_Optimus]
[Portugal_TMN]
[Portugal_Vodafone]
NEDERLANDS
[Nederland_KPN]
[Nederland_Orange]
[Nederland_Telfort]
[Nederland_T-Mobile]
[Nederland_Vodafone]
NORWAY
[Norway_Netcom]
[Norway_Tele2]
[Norway_Telenor]
NEW ZEALAND
[NZ_TelstraClear]
[NZ_Vodafone]
SOUTHAFRICA
[SouthAfrica_MTNSouthAfrica_MTN
[SouthAfrica_CellC]
[SouthAfrica_Vodacom_WAP2.0]
.................................................................................................
troubleshot;
If you uninstall or delete the auto run file please delete [PPCInstaller.lnk]
In the startup folder
.................................................................................................
cabs below are only for cingular networks
rename the files extencions to .cab
Thanks Jose! I'll be loading this later on my Wizard
Is this safe for g4 owners ?
Perfect Timing!
Hi Faria,
Perfect timing to release this new beta rom just for the weekend. I'll be playing around with this ROM the coming weekend.
If you have some time, can you explain why the installation of this ROM has some manual actions like executing am autorun.exe from the My Documents folder.
I'll keep you informed about my results with this ROM.
Kind regards,
Nico Dekker
The Netherlands
Great work. I'll download this rom today and test it.
I'll keep you informed about my results with this ROM and my bluetooth stereo
Just installed the new release. Very cool startup screens. Installation went flawlessly (install rom, run autorun.exe, run operator config). Paired my Plantronics 590 Stereo Headset and I'm now listening to music in strereo! Thanks for resolving this!
Post more as I try it out.
Thanks!!
nicodekker said:
Hi Faria,
Perfect timing to release this new beta rom just for the weekend. I'll be playing around with this ROM the coming weekend.
If you have some time, can you explain why the installation of this ROM has some manual actions like executing am autorun.exe from the My Documents folder.
I'll keep you informed about my results with this ROM.
Kind regards,
Nico Dekker
The Netherlands
Click to expand...
Click to collapse
sure,
due to this rom has the security desabled by default ,for some weird reason this autorun file does not work with comands from the extended rom.
but im trying to get rid of the auto run for good.
i does work if the rom has security enabled ,but then when it finishes installation it turns the rom security on by itself!!!!
i have allredy send this bug to the develpors of the autorun file.they are investigating.
plus i moved the autorun file from the extended rom because some testers could not run it in the last beta.
G3 device
Faria,
can I put this ROM to a G3 device ( IPL 2.26 SP 2.26, Molski 30 Mb ROM )
Thanks
cptcafne said:
Is this safe for g4 owners ?
Click to expand...
Click to collapse
it is safe since the rom has no bootloader integrated.but i dont know if u are able to install.since people with g4 have trouble installing 3.2. roms.
most liklely because is cid locked.
u can unlock cid in a g4 at imeicheck uk or something like that.
nevertheless a would keep an original rom from your carrier for recovery purposes or make an sd backup.
patek said:
Faria,
can I put this ROM to a G3 device ( IPL 2.26 SP 2.26, Molski 30 Mb ROM )
Thanks
Click to expand...
Click to collapse
yes .u will have no trouble.
Working more with the ROM....
The operator config doesn't seem to be working for me. I did do the autorun.exe first and then ran it. At the end, it rebooted. I soft-reset and re-ran the operator file (USA_Cingular), and still don't see the definitions in the settings as I did with the last ROM release.
Ideas?
saeba said:
Working more with the ROM....
The operator config doesn't seem to be working for me. I did do the autorun.exe first and then ran it. At the end, it rebooted. I soft-reset and re-ran the operator file (USA_Cingular), and still don't see the definitions in the settings as I did with the last ROM release.
Ideas?
Click to expand...
Click to collapse
the last rom had 2 files for you carier.this one has one that i found in the xda.maybe thats the problem.if you want i can send you the last rom files.
Another item....
Registry Wizard doesn't seem to run: "Am unexpected error has occurred in Registry Wizard.exe." Related to the operator config?
Thanks!
Can't wait to test it!
After all the positive feedback I read from the initial testers, can't wait to test it myself.
Anyway Faria, thank you very much for investing the time and energy in these kind of initiatives!
Best regards,
Brian.
faria said:
the last rom had 2 files for you carier.this one has one that i found in the xda.maybe thats the problem.if you want i can send you the last rom files.
Click to expand...
Click to collapse
Are you referring to the tweaks.cab file you sent? I still have that. If not, yes, please send the files.
Thanks!
saeba said:
Another item....
Registry Wizard doesn't seem to run: "Am unexpected error has occurred in Registry Wizard.exe." Related to the operator config?
Thanks!
Click to expand...
Click to collapse
read the documents that i have email- you, and you will find out why is not working in your device.
the cab files for your operator are in the first post.
Hi,
Can I install in this rom the Ringo software. In the last one it made wizard crash, only with one hard-reset I solved that problem.
Thanks and great work
Just installed the version
So far so good. Works well. Installation took less than 10 minutes, and only got stuck at 99% for about 2 minutes.
One small thing that looks like a bug is when I try to close the task manager, it won't let me and then I have another task manager in the icons in the bottom of the screen. Is this a real problem or am I using it in the wrong way?
Download, and flash went along perfect. Followed directions exactly. After Extended Rom was installed, and device reset, got the error message "Cannot execute calnot.exe" Then installed my operator settings (US-Cingular) which evidently didnt work correctly - no big deal. After that soft reset, got the error message "cannot execute repllog.exe" I have since soft reset again, with no errors. Off the start, the only thing I see that I dont like is the new clock in the top right. It is cutting the year digit off. Is there a way to just revert back to the standard time? I have alos noticed the task manager quirk as described in the above post.
bradsnw said:
Download, and flash went along perfect. Followed directions exactly. After Extended Rom was installed, and device reset, got the error message "Cannot execute calnot.exe" Then installed my operator settings (US-Cingular) which evidently didnt work correctly - no big deal. After that soft reset, got the error message "cannot execute repllog.exe" I have since soft reset again, with no errors. Off the start, the only thing I see that I dont like is the new clock in the top left. I have alos noticed the task manager quirk as described in the above post.
Click to expand...
Click to collapse
the task manager has been descussed in beta 3 that is the way it works.to exit taskmanager go to options/exit,
to remove the clok or date use registry wizard.
I downloaded the Vodafone NL rom update for the 750, and i put it on the memory card as instructed, however, when it flashes, which takes about 30 minutes, when I hard reset as I am instructed to do (in Dutch), the vodafone rom seems to have taken effect because of the theme and the different initial settings when setting up the device, but in the device information, it says 1.13-CNG instead of 1.15-VFE. I am trying to switch to the Vodafone ROM to correct some bugs that are going on with the Cingular ROM, and I used the Nextgen Server to unlock the phone (and supposedly CID unlock as well).. any help would be appreciated!
-Jeff
How is your treo now, i have got treo cingular, and want to flash it with vodafone one, did you find it better, or stay with cingular?
I flashed it on my cingular Treo 750, it work fine and more stable than before!
ctohang said:
I flashed it on my cingular Treo 750, it work fine and more stable than before!
Click to expand...
Click to collapse
In treocentral a guy replied me that the following features are also prsent in vodafone one:
1- Direct dialing from the today screen (lookup field)
2- The customized right softkey (menu)
3- Photo today speed dial (I know it is present in 750v also)
4- when u missed a call, u get an option to callback or dismiss.
5- When u dial an unkown number, u get the option to add to contacts or copy and add.
6- Threaded SMS messaging
7- searching for contacts from messages editor.
8- keyguard program.
Did you miss any feature that was in cngular ROM and not present in Vodafone ROM other than those specified? and apart from the stability, what about the fastness, is vodafone ROM faster than the cingular?
Lastly, I noticed that the cingular ROM sometimes miss some missed calls ad i have to go to cal log to verify the missed calls, di u experience such a problem in vodafone ROM?
hbahaie said:
In treocentral a guy replied me that the following features are also prsent in vodafone one:
1- Direct dialing from the today screen (lookup field)
2- The customized right softkey (menu)
3- Photo today speed dial (I know it is present in 750v also)
4- when u missed a call, u get an option to callback or dismiss.
5- When u dial an unkown number, u get the option to add to contacts or copy and add.
6- Threaded SMS messaging
7- searching for contacts from messages editor.
8- keyguard program.
Did you miss any feature that was in cngular ROM and not present in Vodafone ROM other than those specified? and apart from the stability, what about the fastness, is vodafone ROM faster than the cingular?
Lastly, I noticed that the cingular ROM sometimes miss some missed calls ad i have to go to cal log to verify the missed calls, di u experience such a problem in vodafone ROM?
Click to expand...
Click to collapse
All of them are included in Vodafone Rom,It's faster than before, but the SMS restore feature, I still not success, when backup the SMS ftom O2 Hermes, it can success restore, but there are no any SMS in the inbox?
Which Version you want to flash?
jefe00 said:
I downloaded the Vodafone NL rom update for the 750, and i put it on the memory card as instructed, however, when it flashes, which takes about 30 minutes, when I hard reset as I am instructed to do (in Dutch), the vodafone rom seems to have taken effect because of the theme and the different initial settings when setting up the device, but in the device information, it says 1.13-CNG instead of 1.15-VFE. I am trying to switch to the Vodafone ROM to correct some bugs that are going on with the Cingular ROM, and I used the Nextgen Server to unlock the phone (and supposedly CID unlock as well).. any help would be appreciated!
-Jeff
Click to expand...
Click to collapse
I am in the same boat as you. I think the problem is that the Voda rom is not digitally signed for our device. I'm not sure though.
ctohang said:
Which Version you want to flash?
Click to expand...
Click to collapse
I am trying to use the same version as Jeff and J0nakatz used.
j0nkatz said:
I am in the same boat as you. I think the problem is that the Voda rom is not digitally signed for our device. I'm not sure though.
Click to expand...
Click to collapse
Apart from the ROM version in settings menu, did you find your rom is tottaly changed to vodafone and all of cingular cutomization has disappeared? do you advise me to upgrade too? thanx
hbahaie said:
Apart from the ROM version in settings menu, did you find your rom is tottaly changed to vodafone and all of cingular cutomization has disappeared? do you advise me to upgrade too? thanx
Click to expand...
Click to collapse
After flashed the Vodafore Rom, version is the same with you (TREO750-1.13-CNG), it totally change to Vodafore, but you Must hard reset after flash!
May I know is the hardware have any different with Vodafore?
ctohang said:
After flashed the Vodafore Rom, version is the same with you (TREO750-1.13-CNG), it totally change to Vodafore, but you Must hard reset after flash!
May I know is the hardware have any different with Vodafore?
Click to expand...
Click to collapse
According to Palm's Windows Mobile dev guide there is a slight difference in the radio between the Treo 750 and the Treo 750v.
https://pdn.palm.com/regac/pdn/index.jsp
I need the link
Can any one post the link where I can find the files or upload the files here so we I can download them?
Thanks
Which Vodafone rom ...
Which rom did you use on the Treo 750/Cingular?
My htc diamond was locked on ORANGE UK, SO, i came onto this site and flashed it with a new rom using olinex 1.40 hardspl. I also flashed a new radio rom 1.00.25.05. I've just recently updated it with the new 2.03 rom wwe. But it was ever since i first flashed the rom that i noticed everything like gprs, mms, wap etc didn't work. I've since been using a O2 simcard. I have tried inputting the O2 settings but it doesn't dial out, or so it says. I was just wondering, does it have anything to do with the radio? Or is it a hardware fault...i can't get my head around it.
Download and install this cab file from your phone and restart.
HERE (orange UK only)
Which ROM did you flash?
Cheers for the reply and sorry for my late reply.
That file would be kind of useless since i am using an O2 simcard atm. I've unlocked the phone so that it can be used on any network, but for some reason i cannot connect to GPRS, MMS or WAP. it says it cannot dial out when all the settings are correct. I've even downloaded and installed the settings from the O2 cab file from this forum but it still doesn't work.
Right now i have the 2.03 rom flashed XBMOD.
The file was provided as you mentioned
I've just recently updated it with the new 2.03 rom wwe. But it was ever since i first flashed the rom that i noticed everything like gprs, mms, wap etc didn't work.
Click to expand...
Click to collapse
Which made me presume you wanted the settings for the Orange network.
Although there should be no problem with the radio you are using, XBmod suggests in his post using radio 1.09.25.23.
Have you tried changing the radio?
Radio Roms can be flashed from the device if renamed to DIAMIMG.nbh and you quickly hold down the "down volume key" and the <-- Back button when switching on the device.
R3PUBL1K said:
The file was provided as you mentioned Which made me presume you wanted the settings for the Orange network.
Although there should be no problem with the radio you are using, XBmod suggests in his post using radio 1.09.25.23.
Have you tried changing the radio?
Radio Roms can be flashed from the device if renamed to DIAMIMG.nbh and you quickly hold down the "down volume key" and the <-- Back button when switching on the device.
Click to expand...
Click to collapse
Yah, i've just changed the radio to .23 but still nothing. I just can't get the thing to dial out! Is there a setting that i need to check to see if it's enabled or not? =s Its jsut annoying that i can't send MMS or use GPRS on the go.
At least you can use the phone! My problem is the opposite...unlocked using the Olinex method...I can use GPRS MMS etc, but I can't reciever any calls or SMS...
I'm on 3 in Australia, so while we're on different continents & our problems are almost oppposite...I feel ur pain!
i seem to be in the same boat.
purchased diamond (orange branded) on ebay, phone unlocked to work with vodafone ireland. no roms flashed or anything else.
settings got for vodfone isp & live! i have tried both but to no avail. when i try to go on the internet via opera or ie i get a proxy server error on opera and on ie 'the page cannot be displayed or downloaded because the connection was lost etc......'
i have noticed one thing though, on the modem settings when i input the username/password as advised by vodafone, when i go back in to check these settings there are more than the normal amount of * which would equate to the password - dont know if that even makes a difference.
does anyone have any idea
Hey guys,
Anyone found a fix for this? I have the same problem with the mms... the settings are right I'm sure. I unlocked using Olinex 1.4? hardspl? Urm would like it to work ......... any suggestions.
Was on Orange UK now unlocked and using my O2 sim.