My 8125 kind of died so I got a 8525 and took my old sim card and put it in the 8525. Do I have to unlock stuff all over again or can I just update the rom on the 8525?
CID and SIM unlocking is in the device, not in SIM card.
So certainly you need to do all over again (But DON'T ever use stuffs for Wizard to unlock your 8525! Head to the Hermes forum for unlocking information)
Will do, Thanks!
hi guys, need help in unlocking 8125.
hi guys
can anyone please help me to unlock my new 8125?
thank you so much
Yeah -- read -- and read some more.
Related
Hi Guys,
Firstly, i am new to this - so if i ask any stupid Q's, please forgive me
I will be getting my MDA Vario tomorrow, and before i do too much customisaton and transfer my phonebook over, i would like some advice on upgrading.
From reading this Forum, i believe that I have to do a CID unlock and a SIM unlock. I am familier with a SIM unlock, but what it a CID unlock?
Also, from what i can gather, in order to do this - i have to downgrade to an older version of the rom first. Once i have done this and unlocked the device, does anyone have any recomendations on what ROM i should upgrade it to? I have heard the Qtek rom is a good one, but will is this the best one to be going for?
Thanks for your input guys. You can be asured, once i get familier with this device i shall be providing much imput to this forum!
Glyn
Hi, I'm new to WM5/vario as well (experienced on palms & treos).
You only need to unlock the wizard if you want to use another suppliers SIM card, and to get rid of the T-Mobile stuff you need to remove the Carrier ID (CID), so you can then change the rom to another one not recognised by your TMobile rom.
I understand, but could be wrong, that you only need to down grade if your device already has one of the latest a2dp stereo roms with push email built in.
Hope this helps (if I'm right)!!!
I am a noob here, and i have no clue what the forum is talking aobut, can someone please help me, i need to unlock my T-Mobile MDA to work with the Cingular Service
Look through the threads. Lokiwiz has produced an unlocker that will unlock your MDA(SIM and CID). You will need to determine if you have a G3 or G4 and that will get you started:
http://forum.xda-developers.com/showthread.php?t=265928&highlight=lokiwiz
Reda this also:
http://forum.xda-developers.com/showthread.php?t=263116&highlight=lokiwiz
After you get it unlocked you may want to install one of the cooked roms that will make it perform better. I am currently using Molski's rom:
http://forum.xda-developers.com/showthread.php?t=279097&page=23
I was completely lost at first but within a few days I had mine unlocked and upgraded. Just keep reading.
Good luck!
Hi guys,
I wanted to sell my Cingular 8125 back on eBay. What do I need to unlock? I am confused about CID unlocking / SIM unlocking ...
The device works perfectly, I have installed mfrazzz WM6 version 4.
Thanks!
Telenochek said:
Hi guys,
I wanted to sell my Cingular 8125 back on eBay. What do I need to unlock? I am confused about CID unlocking / SIM unlocking ...
The device works perfectly, I have installed mfrazzz WM6 version 4.
Thanks!
Click to expand...
Click to collapse
Is it a G3 or G4 and how much do you want for it?
Telenochek said:
Hi guys,
I wanted to sell my Cingular 8125 back on eBay. What do I need to unlock? I am confused about CID unlocking / SIM unlocking ...
The device works perfectly, I have installed mfrazzz WM6 version 4.
Thanks!
Click to expand...
Click to collapse
If you have a cooked rom on it already, I'm guessing it is already unlocked. My suggestion, use the WST to do a check. CID unlocked allows for custom roms. SIM unlocking allows for other providers. A quick glance at the stickies or wiki would explain it more, that's why we have them. They will also help you determine what (if anything) needs to be done to your device.
I HAVE ATT TILT
IN BOOTLOADER MODE IT SHOWS
KAISI*0
SPL-1.56.0000
CPLD-8
How can i unlock it? if I put any other sim rather then ATT its show SIM LOCK
Please help
Thanks
Maybe you should read the WIKI to start. But I used KaiserUnlocker to unlock my sim card, but that is what I did. You do what you want, but I would first suggest again that you READ THE WIKI.
maansii said:
I HAVE ATT TILT
IN BOOTLOADER MODE IT SHOWS
KAISI*0
SPL-1.56.0000
CPLD-8
How can i unlock it? if I put any other sim rather then ATT its show SIM LOCK
Please help
Thanks
Click to expand...
Click to collapse
just like kdkobes said please read the wiki. The question you ask has been answered many times, trust me i asked it. but the info is there.
and secondly, if you got the phone "legally" and are an att customer all you had to do is dial "611" from your phone get in touch with att and they will give you the sim unlock code for your device ... ; just tell them you are going oversees (use a country like pakistan were att doesn't provide service) and need the unlock code .. i did it and they gave me the code in 5 minutes. Or you can use pof's hardspl which will unlock your cid and sim install olipro's spl (enabling u to flash new roms to your phone).
But going back to statment one, please read the wiki
cheers,
sire
Calling AT&T vs. HARDSPL
If you get AT&T to give you a SIM Unlock code, do you still need to run HARDSLPL to install a cooked ROM?
jdmba said:
If you get AT&T to give you a SIM Unlock code, do you still need to run HARDSLPL to install a cooked ROM?
Click to expand...
Click to collapse
Yes. There you got your free answer without needing to search. Everyone gets one.
SIM Unlocking just allows you to put any GSM carriers SIM card in your phone and it will work. HardSPL changes the boot loader so you can update the Roms.
Hi,
I just bought a T-Mobile Wing and wanted to unlock it for international usage and loading WM 6.1 (custom cooked ROMS). I hope the procedure would be same as I did with my previous WIZARD.
Can someone help me here in this regard?
Thanks.
singhravi437 said:
Hi,
I just bought a T-Mobile Wing and wanted to unlock it for international usage and loading WM 6.1 (custom cooked ROMS). I hope the procedure would be same as I did with my previous WIZARD.
Can someone help me here in this regard?
Thanks.
Click to expand...
Click to collapse
One Thread hat done it as well, for the rest you hat only to use the first Thread in Herad or Herald Mobil 6.
See here:
http://forum.xda-developers.com/showthread.php?t=369397
http://forum.xda-developers.com/showthread.php?t=327046
contact jockyw2001 for SIM unlocking
"SIM Locked" Network Locked - Enter unlock code
Even after doing the Hard SPL the device is asking for unlock code if I insert a foreigh sim card.
I tried doing the USPL also. Same results.
After Hard SPL I also tried to install Touch_IT_wm6.1_Full_-Herald_P4350.zip ROM. It installed well but show same SIM locked error.
Please let me know the steps to start fresh and unlock the phone for international usage. I also wanted to load custom rOM but as SIM not supporting so not able to proceed further.
Apreciate any help in this regard.
Device: T Mob Wing (HERA110)
I answered your question in the other thread.
Please don't double or cross post