Att Tilt How To Unlock Sim? - Tilt, TyTN II, MDA Vario III General

I HAVE ATT TILT
IN BOOTLOADER MODE IT SHOWS
KAISI*0
SPL-1.56.0000
CPLD-8
How can i unlock it? if I put any other sim rather then ATT its show SIM LOCK
Please help
Thanks

Maybe you should read the WIKI to start. But I used KaiserUnlocker to unlock my sim card, but that is what I did. You do what you want, but I would first suggest again that you READ THE WIKI.

maansii said:
I HAVE ATT TILT
IN BOOTLOADER MODE IT SHOWS
KAISI*0
SPL-1.56.0000
CPLD-8
How can i unlock it? if I put any other sim rather then ATT its show SIM LOCK
Please help
Thanks
Click to expand...
Click to collapse
just like kdkobes said please read the wiki. The question you ask has been answered many times, trust me i asked it. but the info is there.
and secondly, if you got the phone "legally" and are an att customer all you had to do is dial "611" from your phone get in touch with att and they will give you the sim unlock code for your device ... ; just tell them you are going oversees (use a country like pakistan were att doesn't provide service) and need the unlock code .. i did it and they gave me the code in 5 minutes. Or you can use pof's hardspl which will unlock your cid and sim install olipro's spl (enabling u to flash new roms to your phone).
But going back to statment one, please read the wiki
cheers,
sire

Calling AT&T vs. HARDSPL
If you get AT&T to give you a SIM Unlock code, do you still need to run HARDSLPL to install a cooked ROM?

jdmba said:
If you get AT&T to give you a SIM Unlock code, do you still need to run HARDSLPL to install a cooked ROM?
Click to expand...
Click to collapse
Yes. There you got your free answer without needing to search. Everyone gets one.
SIM Unlocking just allows you to put any GSM carriers SIM card in your phone and it will work. HardSPL changes the boot loader so you can update the Roms.

Related

what is cid-unlocking

Hey guys
I just dont understand what cid/sim unlocking is. Is all the phones locked and why do we need to unlock it . I am planning to upgrade my k-jam currently running wm 5.0 to wm 6.0, so should i unlock my phone and also how do we know the phone is locked or not.
can we downgrade to older rom once updated to newer rom.
plz help i am confused...
use the search button...ur questions will be answered...=)
chaksashi said:
Hey guys
I just dont understand what cid/sim unlocking is. Is all the phones locked and why do we need to unlock it . I am planning to upgrade my k-jam currently running wm 5.0 to wm 6.0, so should i unlock my phone and also how do we know the phone is locked or not.
can we downgrade to older rom once updated to newer rom.
plz help i am confused...
Click to expand...
Click to collapse
If you got your phone from a carrier i.e. with a contract it is most likely locked to that carrier.
SIM lock means that you can only use SIM cards from the carrier you are locked to. If you SIM unlock your phone you will be able to use sim cards from other carriers or pay as you go plans without receiving the invalid sim message.
CID Lock means that your phones software is locked to your carrier. This means that you can only flash updates from that carrier. No custom flashing, no cross carrier flashing. Before you flash anything from this forum you will most likely need to be CID unlocked. Read the stickies to find out how to do this. Make sure you follow all the steps. The process works.
If you have not personally CID unlocked your device you must assume you ARE CID LOCKED. Even if someone before you unlocked your device it will not hurt to do it again. If you have any problems flashing your device this is the first question back that you will get when you ask for help.
god dammit. there is a wiki and nooooooo one reads it.
MODS, PLEASE ENVOKE A TRIAL PERIOD BEFORE 1ST POST.
Zzan said:
If you got your phone from a carrier i.e. with a contract it is most likely locked to that carrier.
SIM lock means that you can only use SIM cards from the carrier you are locked to. If you SIM unlock your phone you will be able to use sim cards from other carriers or pay as you go plans without receiving the invalid sim message.
CID Lock means that your phones software is locked to your carrier. This means that you can only flash updates from that carrier. No custom flashing, no cross carrier flashing. Before you flash anything from this forum you will most likely need to be CID unlocked. Read the stickies to find out how to do this. Make sure you follow all the steps. The process works.
If you have not personally CID unlocked your device you must assume you ARE CID LOCKED. Even if someone before you unlocked your device it will not hurt to do it again. If you have any problems flashing your device this is the first question back that you will get when you ask for help.
Click to expand...
Click to collapse
Great advice and gently put....!
Asking questions is ok but do your research 1st! 90% of what you need to know has already been discussed, so the answers are here. If you don't find an answer, by all means ask...it is a forum.
hiimcliff said:
god dammit. there is a wiki and nooooooo one reads it.
MODS, PLEASE ENVOKE A TRIAL PERIOD BEFORE 1ST POST.
Click to expand...
Click to collapse
I'm an experienced user and I never once thought to read the Wiki until I needed some quick answers so understand first time users. This is a forum
Zzan said:
If you got your phone from a carrier i.e. with a contract it is most likely locked to that carrier.
SIM lock means that you can only use SIM cards from the carrier you are locked to. If you SIM unlock your phone you will be able to use sim cards from other carriers or pay as you go plans without receiving the invalid sim message.
CID Lock means that your phones software is locked to your carrier. This means that you can only flash updates from that carrier. No custom flashing, no cross carrier flashing. Before you flash anything from this forum you will most likely need to be CID unlocked. Read the stickies to find out how to do this. Make sure you follow all the steps. The process works.
If you have not personally CID unlocked your device you must assume you ARE CID LOCKED. Even if someone before you unlocked your device it will not hurt to do it again. If you have any problems flashing your device this is the first question back that you will get when you ask for help.
Click to expand...
Click to collapse
thanks for your help Zzan now i have understood the CID unlocking stuff

Cid Unlock Cingular Treo 750

Has anyone got there CINGULAR TREO 750 CID UNLOCKED YET? If so HOW?!?!?!?
imeicheck
Hi,
I unlocked mine with http://www.imei-check.co.uk/p750unlock.php.
Nice service worked as expected.
Hope I could be of assistance
this is just a sim unlock. i am looking for cid unlock to be able to use other software on it. thanks for trying though!
I actually think it does both.
I got my unlock code from Cingular, anyone know how to enter it in w/o a foreign sim?
Update: found a co-worker with T-Mobile. Popped in their Sim, entered the unlock code provided by cingular and i'm good to go.
spartanrob said:
I got my unlock code from Cingular, anyone know how to enter it in w/o a foreign sim?
Click to expand...
Click to collapse
turn on the PHONE function on Palm with the foreign SIM card in and type in
*#*#YOUR CODE HERE#, then press the center button.
Just go to ebay and purchase an unlock code for your phone. it fast, easy and 2 times cheaper than imei-check . it's just 17.99$ each
http://rover.ebay.com/rover/1/711-1...11&mpre=http://stores.ebay.com/YourUnlockCode
hope i can help
The Treo 750 does not have CID lock on it, you can intall whatever you want without restrictions. I dont even think it has applock.
The only lock is the SIM lock.
you can use the installer and when it errors steal the image file from the temp dirrectory and put it on your flash card and do the install that way. worked with vadaphone rom on cingular(AT&T) phone.

CID/SIM unlocking for T-MOB WING

Hi,
I just bought a T-Mobile Wing and wanted to unlock it for international usage and loading WM 6.1 (custom cooked ROMS). I hope the procedure would be same as I did with my previous WIZARD.
Can someone help me here in this regard?
Thanks.
singhravi437 said:
Hi,
I just bought a T-Mobile Wing and wanted to unlock it for international usage and loading WM 6.1 (custom cooked ROMS). I hope the procedure would be same as I did with my previous WIZARD.
Can someone help me here in this regard?
Thanks.
Click to expand...
Click to collapse
One Thread hat done it as well, for the rest you hat only to use the first Thread in Herad or Herald Mobil 6.
See here:
http://forum.xda-developers.com/showthread.php?t=369397
http://forum.xda-developers.com/showthread.php?t=327046
contact jockyw2001 for SIM unlocking
"SIM Locked" Network Locked - Enter unlock code
Even after doing the Hard SPL the device is asking for unlock code if I insert a foreigh sim card.
I tried doing the USPL also. Same results.
After Hard SPL I also tried to install Touch_IT_wm6.1_Full_-Herald_P4350.zip ROM. It installed well but show same SIM locked error.
Please let me know the steps to start fresh and unlock the phone for international usage. I also wanted to load custom rOM but as SIM not supporting so not able to proceed further.
Apreciate any help in this regard.
Device: T Mob Wing (HERA110)
I answered your question in the other thread.
Please don't double or cross post

"SIM Lock" Network Locked - Enter unlock code

Even after doing the Hard SPL the device is asking for unlock code if I insert a foreigh sim card.
I tried doing the USPL also. Same results.
After Hard SPL I also tried to install Touch_IT_wm6.1_Full_-Herald_P4350.zip ROM. It installed well but show same SIM locked error.
Please let me know the steps to start fresh and unlock the phone for international usage. I also wanted to load custom rOM but as SIM not supporting so not able to proceed further.
Apreciate any help in this regard.
Device: T Mob Wing (HERA110)
HardSPL is a cid unlock which does not sim unlock the phone. Seeing as how you have a tmobile wing, you should call tmobile and ask them for the unlock code. Just tell them you're going out of country

New TM-US HD2 Owner - need help

I bought an locked HD2 and I have an AT&T SIM. My HD2 says this when I goto bootloader.
PB81120 SS-B3
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x40
It looks like somebody has "unlocked" with HSPL. But when I insert my ATT SIM card, I still get "network locked, enter unlock code"
1. Does installing HSPL unlock the phone or just be able to flash custom ROMS ?
2. Do I need to pay somebody to get the unlock code for my HD2's IMEI ?
Thanks,
nOOb
1 roms only. Two different types of lock. No free unlock for the hd2, except if you can get one from t mo. Someone with a t mo contract can ask, or buy one online.
You might want to call TM and ask for the unlock codes, they are pretty good about this. I had an ATT locked phone and called, explained what I had and they gave me the code straight away.
0nova said:
I bought an locked HD2 and I have an AT&T SIM. My HD2 says this when I goto bootloader.
PB81120 SS-B3
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x40
It looks like somebody has "unlocked" with HSPL. But when I insert my ATT SIM card, I still get "network locked, enter unlock code"
1. Does installing HSPL unlock the phone or just be able to flash custom ROMS ?
2. Do I need to pay somebody to get the unlock code for my HD2's IMEI ?
Thanks,
nOOb
Click to expand...
Click to collapse
Yea, you need to pay someone to unlock your device. It is network locked. HSPL helps you install custom ROMS etc.

Categories

Resources