When I call a busy telephone it gives me CONNECTED then it closes the line.
Also if my phone is busy and I receive a missed call it lists the call as received call not missed call.
Is there any patch or something may solve these problems?
No there isn't. And you're already using the Radio advised, the one that has it the less
mestrini said:
No there isn't. And you're already using the Radio advised, the one that has it the less
Click to expand...
Click to collapse
Thank you for your time
Before I updgrade my ROM to WM6 I did not have these problems, should I go back to WM5 to avoid them or what?
Related
When you are calling someone that has another call (Call waiting), your PPC do not show in a notification or beep that the second party is having another line.
This is available on any very basic symbian phone.
Is there a cab to fix that?
Share a solution if you have one..
This is a feature from your carrier.... Call waiting works just fime on my Kaiser
rohanmaini said:
This is a feature from your carrier.... Call waiting works just fime on my Kaiser
Click to expand...
Click to collapse
Call waiting works fine on my Kaiser as well.
The carrier here has this option.
This is not the problem though.
The problem is when you call someone up from a PPC and that party has another line.
You should get a beep or a visual notification showing that the person you are calling has another line (my call is waiting on his phone).
So, if someone has a solution for this; please share.
Ok what I think your talking about is when you call someone that is on the phone, you hear a quick beep indicating that they are on the line, correct????
If this is what you are talking about, YES it is carrier specific. For example, when I call my father on Verizon and he is on the phone with someone else, after each ring there is a small beep. This is telling me that he is on the line.
There is nothing you can do to the Tilt to change this, it is carrier specific.
True... and there are also some PBX systems that provide the ring/beep when you are the call waiting. It usually depends on the phone system of the person you're calling.
fireblade63 said:
Call waiting works fine on my Kaiser as well.
The carrier here has this option.
This is not the problem though.
The problem is when you call someone up from a PPC and that party has another line.
You should get a beep or a visual notification showing that the person you are calling has another line (my call is waiting on his phone).
So, if someone has a solution for this; please share.
Click to expand...
Click to collapse
I think that is carrier specific too.. if I am calling some someone who is busy on another call, I get a completely diff to ringing tone.. Infact in most cases I get a audio message that the person I am calling is busy on another call and I should wait or call back later... Atleast thats what we have on all major carriers here in India...
ok we know that carrier has to support it, i know t-mobile does...
i used an old nokia to check and it works, it beeps and the whole screen says CALL WAITING, then it starts ringing...
i haven't seen any Windows Mobile touch screen or not that can do this
so its a carrier thing, yes t-mobile supports it.. windows mobile doesnt support it though!!!
so there is no way to make a .cab or something to fix this problem
It's not broken so how can you fix it? It's just not a feature that is offered.
it is not about the carrier. for instance when i had a nokia, when the other party was on the phone i had a beep in my phone, but with the WM devices, you cannot see that you call is waiting.
Okies, I'm posting this here because I'm not exactly sure what the issue is.
I have been have issues with my cellular radio shutting off and not restarting. For example If i go more than like 3 hours without making or receiving a call it does not receive calls at all until I make a call (which I believe resets the radio?) So no missed calls, just no calls altogether. This seems to be a recent occurrence, ever since I flashed to TTrans Open Touch 3.0, I have since then tried 4.0 and am still having the same issue. I will be reverting to the original ROM tonight but would rather stay with my current one. Any help is greatly appreciated.
*I can spell really I can intermittent*
try using a different radio rom and seeing if that works.
fzzyrn said:
try using a different radio rom and seeing if that works.
Click to expand...
Click to collapse
Bumped my radio up to 03.18.90.
*crosses fingers*
Hi,
I have a CDMA Touch from Telus Mobility in Canada.
The issue I am having is # rings with incoming calls.
I am using latest Jawbone Bluetooth headset, when I have an incoming call, I receive 2 rings and calls goes to voice mail.
I have called HTC Support and Telus support, they have no solution.
Is there a setting to modify the number of rings for incoming calls?
dave3211
If you're talking about the number of rings before the voicemail kicks in, yes there is a solution if your phone number is in Alberta or BC.
I dont know what Alberta or BC is...
but on my phone i do it like this...
Start->Settings->click phone->'Services(dono if it's called this, second tab)
There is a list, in that list there should be (again, dono the english word) 'forward to'
click Get Settings...
now u can set the number of secunds before it connects the call to voicemail..
with the intervals 5,10,15,20,25,30 seconds (at least with my phone provider)
hope this helps
thanks nisse thats very helpfull.
by the way forward to is call forwarding.
Excellent!!
NisseDILLIGAF said:
I dont know what Alberta or BC is...
but on my phone i do it like this...
Start->Settings->click phone->'Services(dono if it's called this, second tab)
There is a list, in that list there should be (again, dono the english word) 'forward to'
click Get Settings...
now u can set the number of secunds before it connects the call to voicemail..
with the intervals 5,10,15,20,25,30 seconds (at least with my phone provider)
hope this helps
Click to expand...
Click to collapse
Been trying to sort this out for years...nice one and thanks!!
NisseDILLIGAF said:
I dont know what Alberta or BC is...
but on my phone i do it like this...
Start->Settings->click phone->'Services(dono if it's called this, second tab)
There is a list, in that list there should be (again, dono the english word) 'forward to'
click Get Settings...
now u can set the number of secunds before it connects the call to voicemail..
with the intervals 5,10,15,20,25,30 seconds (at least with my phone provider)
hope this helps
Click to expand...
Click to collapse
Nice one indeed. thank you!!
3 rings delay in incoming call
Hi,
This might be due to another related issue:
There is delay of 3 rings before the diamond actually starts ringing.
i.e, after the caller has heard 3 rings, only then the diamond starts ringing, and by the time you pick the call, there will be many rings and it will go to answer phone as usual.
As soon as there is an incoming call, the light starts blinking. But there is a delay in the ringer/vibrate. You can try this out by calling from another phone.
This might be cause for your issue.
I too am having the same problem, and I'm searching for a solution. Maybe some cab which fixes the 3 rings dealy in incoming call... I'm sure there must be some such cab. Still going through the threads in the forum.
Could anybody please point us to a fix if you know...
Thks,
Sandeep
I've got the same problem on my touch pro..
It's even worse actually - I'm experimenting, but it seems like half the time the phone *never rings* when wifi is on and if it's asleep...
What the???
-mark
http://forum.xda-developers.com/showthread.php?p=2793104#post2793104
its a setting by your phone provider
yeah ive been testing the same problem with mine ringin from my nokia you hear it ringing out but the touch is still a sleap and bingo like you said 3 rings later it fires into action
ive also searched about - downloaded a new rom but still has the glitch
anyone sorted this out yet !! please post if you have a link to the cure
sandeepn81 said:
Hi,
This might be due to another related issue:
There is delay of 3 rings before the diamond actually starts ringing.
i.e, after the caller has heard 3 rings, only then the diamond starts ringing, and by the time you pick the call, there will be many rings and it will go to answer phone as usual.
As soon as there is an incoming call, the light starts blinking. But there is a delay in the ringer/vibrate. You can try this out by calling from another phone.
This might be cause for your issue.
I too am having the same problem, and I'm searching for a solution. Maybe some cab which fixes the 3 rings dealy in incoming call... I'm sure there must be some such cab. Still going through the threads in the forum.
Could anybody please point us to a fix if you know...
Thks,
Sandeep
Click to expand...
Click to collapse
I think that he's referring to the 3 second delay built into most phones. On earlier devices this was fixed by changing the polling time in the phone programming. (often referred to as the Slot Cycle Index). I haven't tried it on my Diamond as I haven't noticed that much of a lag.
Since I was thinking about it, I decided to try. I changed my SCI from 2 to 0.
I did look and found that I don't have that "Forward to" option in my phone settings. Probably a provider change.
Ok guys.....I can't be the only one this has happened to. For the last week I have been getting somewhat random calls and caller id shows its my number. There are times when I happens right around a phone call but the phone has had root for 6 months...multiple roms flashed and never an issue till now. Running crc1 with cyan 4.0.4 build...themed with community hero. This is the second post about this....does someone know what's happening or how to fix it...thanks
its called someone is spoofing you with a spoof app of some sort heres a website about what its about.
basically youre being pranked
Here's the website
I appeciate the insight but I have that app and as far as I am aware you can't call a number with the same number.....it won't allow it. So I'm pretty sure that's not it.
Umm i dont think you understand completely.
Ok ....now I know its the phone ....noticed a pattern...it seems to do it right after someone calls but only rings a couple of times. And I'm not sure what it is I don't understand.
oneyoungjay said:
Ok ....now I know its the phone ....noticed a pattern...it seems to do it right after someone calls but only rings a couple of times. And I'm not sure what it is I don't understand.
Click to expand...
Click to collapse
Say Dave doesn't like Jay and wants to prank call him.
He uses SpoofApp or the equivilant service to call him.
To use this service all you need to do is enter the number you would like to call and the number that you would like to show up on the recievers callerID.
Jay recieves a call from the number that Dave put in.
It could be just about any number and the only way that I know of for sure to tell who it is that's calling you is TrapCall.
Hope that clears it up.
Ya I hear you on that and I have used it......I'm not stupid. This is a phone issue. The calls are comming after a voicemail is left. What could the problem be. I'm not trying to be a jerk but the obivious solution is not allways the right one. Could someone give me an idea.
I agree with you oneyoungjay I have that app to and you can't put the number to call and the number to display at the same time. It will not allow it. I use the app pretty often.
My iPhone used to do this to me on t-mobile a few months ago, just like voicemails sticking, i solved it by leaving myself a voicemail. (and its actually a carrier issue, i believe)
try changing voicemail client to phonefusion for example. If its a carrier issue that should bypass it if not sorry...
Thanks .....ill try that a let you know if it worked.
My HTC one have a problem with outgoing calls, sometimes when I call someone I can not hear call tone and the interlocutor hears nothing too.
please, find me a solution.
thank you.
I've noticed mine has started doing this in the last week or so as well. Weird.
deadmaua said:
My HTC one have a problem with outgoing calls, sometimes when I call someone I can not hear call tone and the interlocutor hears nothing too.
please, find me a solution.
thank you.
Click to expand...
Click to collapse
Same think for me since I went to 4.4.3. When this happens no outgoing calls are getting through, but also incoming call are lost. The only get around solution is to restart the phone.
My Rom is full stock, the phone is not rooted. All other functions are runing fine.
Sent from my GT-P7310 using XDA Free mobile app
Im stock developers edition 4.4.3. Haven't really done anything with my phone since i installed the DE rom. everything else seems to work but calls act weird. I too have to restart to get it working right again.